QMQingxin Meng

Qingxin Meng

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Qingxin Meng has a total of 21 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Fast 3D simulation of transient electromagnetic fields with grounded-wire sources and topography: A finite-difference time-domain algorithm based on segmented solution

    by Jianghao Chang, Junjie Xue, Qingxin Meng, Kerui Fan

    The finite-difference time-domain (FDTD) method for the simulation of transient electromagnetic (TEM) fields typically applies an upward-continuation boundary condition on the earth–air interface to avoid time-stepping of the field in air, which is not suitable for the modeling of topography and comprises limited parallel efficiency. An FDTD algorithm was presented based on a segmented solution for 3D TEM modeling with grounded-wire sources, which includes the air layer in the computational domain capable of modeling rugged topography and allows for larger time steps at late times to reduce the computation time. By using the same time-stepping equations within the air layer as those in the earth, this scheme achieved high parallelism, making it easily accelerated by a graphics processing unit to improve computational efficiency. To ensure stability in time-stepping the electromagnetic field in air, a Gaussian function was used to convolve the transmitting waveform, thereby eliminating the high-frequency components above the frequency range of the TEM systems. A segmented solution approach was adopted, enabling separate computations for the early- and late-time electromagnetic fields. In the late stage, the air conductivity was treated as a higher value, allowing larger time steps without compromising the accuracy, thus improving the computational efficiency. Tests were conducted using a homogeneous half-space, layered, and 3D complex models demonstrating the computational efficiency, accuracy, and reliability of the algorithm. Additionally, the results from the topography and land-sea model simulations further confirmed that this algorithm can be effectively applied to the modeling of rugged terrain and complex geologic structures.

  • Estimation of magnetization directions using a sequential approach with inversion of normalized source strength and Bayesian Monte Carlo method

    by Shida Sun, Hongrui Xu, Qingshan Zhang, Qingxin Meng, Jingjie Cao

    Total magnetization direction is not only an important parameter in magnetic data analysis but also provides valuable insights into the magnetic mineral composition, structure, and evolution of its sources. However, this direction is often unknown in the presence of strong remanent magnetization. We develop a sequential approach comprising three steps to estimate the magnetization directions of sources. The spatial locations and shapes of the anomalous bodies are first determined using L1-norm inversion of normalized source strength (NSS). For each anomalous body, the three components of the magnetic anomalous vector are then obtained through a fast-forward calculation based on Poisson’s relation. Finally, a Bayesian Monte Carlo inversion of total-field data is used to estimate the unknown magnetization directions of all anomalous bodies and their associated uncertainties. A synthetic model consisting of two causative bodies with distinct total magnetization directions is tested to validate this approach. Moreover, we analyze the sensitivities of three magnetization parameters and comprehensively investigate the influences of several factors on the estimation results. A field data example using the total-field magnetic anomaly over the Black Hill Intrusive Complex is also studied. The results and analyses suggest that our approach is applicable to sources containing multiple bodies with varying magnetization directions. In addition, supplementary prior information is advisable for cases where the inversion of NSS is not suitable in the first step, such as when the source body is located at great depth or has an asymmetric shape.


  • A study of time spectrum identification of induced polarization field based on Weibull distribution function

    by Qingxin Meng, Wenli Gao, Zheng Niu, Jianghao Chang, Shida Sun, Haibo Zhang

    Identification of time spectrum is one of the core issues of the time-domain induced polarization (IP) method, which can be considered as one of the bases for distinguishing various polarized rocks. Fitting the IP data based on the spectrum forward model and obtaining optimal solution of the model parameters is a key step in spectrum identification. However, the suitable forward model should consider the observation conditions, such as the charging time and the time window. The time spectrum identification may be difficult to implement stably due to the lack of objective reference for the optimal solution. Therefore, our purpose is to improve the forward model and implement the spectrum identification for IP data. First, using the Weibull (WB) distribution function as the basis, a time spectrum forward model considering the charging time and observation time window is provided according to the typical measurement mode. Then, based on the WB spectrum model and Barzilai-Borwein gradient optimization, a method for solution of apparent spectral model parameters for spectrum identification is developed. Finally, this method is used to process the IP data from a mine in which the anomalies related to ore-bearing beds are identified based on the processing results. Results obtained demonstrate that the spectrum forward model based on the WB function is feasible in describing the IP data. The limited charging time and a wide observed time window should be considered to realize accurate simulations and description of the time-domain IP data. The essence of the time spectrum identification is to comprehensively reflect the time-varying state of the whole time channel through the spectral model parameters, whereas the decay field ratio of the adjacent time channel can be used as an objective reference. The parameters of the spectrum model characterizing the time-varying state are independent of polarization and resistivity and thus can be directly used for identification of IP anomalies.

  • Open Access

    Magnetic dipole source TEM all-time apparent resistivity one-dimensional forward modeling and optimization calculation

    by Zhongyuan Sun, Qingxin Meng

    Carrying out the forward modeling and one-dimensional apparent resistivity optimization calculation of TEM(transient electromagnetic method), theoretically verifies the the possibility that obtains the apparent resistivity in the full time domain under the condition of multiple offsets. By calculating the second derivative, Halley’s method can accelerate the iteration and make the function converge. The moment, offset and apparent resistivity are controlled by variable method. Halley’s method is used to iterate the moment, offset and apparent resistivity for completing the optimization calculation. In this paper, a conclusion will be finally drawn that the multi-offset TEM can get the apparent resistivity in the full time domain.

  • Time-domain induced polarization forward modeling and an apparent spectral parameter solution based on the Weibull growth model

    by Qingxin Meng, Xiangyun Hu, Heping Pan, Huolin Ma, Miao Luo

    The application of the Cole-Cole model within time-domain induced polarization (TDIP) forward field modeling shows that the model parameters can characterize time-varying states of the TDIP field and support observed data analysis. The Cole-Cole model contains real and imaginary parts, and it requires a frequency-to-time conversion for TDIP forward modeling. However, the TDIP field is usually expressed by a real number, and its intuitive time-varying states field intensity increases with charging time. Therefore, the forward model should be constructed in a simpler form. We have aimed to develop a forward model using mathematical functions not based on physical principles. The Weibull (WB) growth model, which is primarily used to describe the time-varying curve features in regression analysis, is introduced into the basic algorithm of the TDIP forward model. Subsequently, a forward expression of the TDIP effect is established. Based on the time-varying shape and scale parameters, this expression describes the time-varying rate and relaxation states of the TDIP fields. Furthermore, based on the extensively used conjugate gradient optimization, an apparent WB parameter scheme is initiated to calculate the spectral parameters that represent the relaxation and time-varying rate obtained from the multi-time-channel TDIP data. Finally, this scheme is applied to interpret the different simulated and actual TDIP data. The results demonstrate that the WB growth model can be used for the TDIP forward model without involving physical principles, the model parameters without specific physical significance can be used to represent the time-varying states of TDIP fields, and apparent WB parameters can be used to discern different TDIP observed data. The setting of the TDIP forward model and model parameters can actually be more flexible and diverse, so as to obtain simpler forward expressions and ensure a highly efficient inverse solution.