Li Ding
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Li Ding has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Xing-Chang Wei
Zhejiang University
9 shared publications Jun Wen
College of Information Science and Electronic Engineering, Zhejiang University, Hangzhou, China
4 shared publications- Richard Xian-Ke Gao
Institute of High Performance Computing, Agency for Science, Technology and Research, Singapore
4 shared publications - Jia-Chen Zhang
Zhejiang University, Hangzhou, China
2 shared publications - Yongliang Zhang
Inner Mongolia University
2 shared publications Andriy Radchenko
Apple Inc., Cupertino, CA, USA
1 shared publication
Latest Publications
- 28 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 71 (7) , 6219-6224
A Wideband Tangential Electric Probe Based on Common Mode Absorbing
A new tangential electric field probe covering a wide frequency band (1.4 GHz to 7.0 GHz) based on common mode absorbing is presented in this article. The self-resonance of a traditional electric field probe incorporating reflective balun is firstly characterized based on the principle of transverse resonance, which is the major barrier for achieving wideband. In order to annihilate the self-resonance for a wider working band, an absorbing-type balun is therefore proposed and integrated into the tangential electric field probe. The common mode rejection ratio of the new probe is greatly elevated, compared with the conventional ones. A prototype of the probe is fabricated and measured for different electromagnetic interference problems. The results demonstrate excellent performances in terms of the sensitivity, suppression of unwanted fields coupling and the spatial resolution over the wide working band.
- 28 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 71 (7) , 6219-6224
A Wideband Tangential Electric Probe Based on Common Mode Absorbing
A new tangential electric field probe covering a wide frequency band (1.4 GHz to 7.0 GHz) based on common mode absorbing is presented in this article. The self-resonance of a traditional electric field probe incorporating reflective balun is firstly characterized based on the principle of transverse resonance, which is the major barrier for achieving wideband. In order to annihilate the self-resonance for a wider working band, an absorbing-type balun is therefore proposed and integrated into the tangential electric field probe. The common mode rejection ratio of the new probe is greatly elevated, compared with the conventional ones. A prototype of the probe is fabricated and measured for different electromagnetic interference problems. The results demonstrate excellent performances in terms of the sensitivity, suppression of unwanted fields coupling and the spatial resolution over the wide working band.
- 9 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 11 (8) , 1235-1242
Near-Field Scanning Based Shielding Effectiveness Analysis of System in Package
The electromagnetic interference (EMI) problems are crucial for system-in-package (SiP) due to the high demand of miniaturization and dense integration. Shielding methods are generally employed to protect SiP from EMI, through assessing the key performance index, i.e., shielding effectiveness (SE). In this article, the SE of a SiP is evaluated by using near-field scanning method. The SEs derived by using maximum near-field values and average near-field values are comparatively analyzed. The difference in near-field patterns of the unshielded and shielded SiPs may incur overestimation of the SE by using maximum field values. Both simulation and measurement results manifest that the gap between SiP and printed circuit board (PCB) will significantly change the radiation pattern of a shielded SiP, and thus has a great impact on the SE, especially when the frequency is above 1 GHz. However, a good correlation is found between the SE based on average near-field and the SE derived from the radiated power. This study has revealed the near-field shielding properties of SiP, which is helpful for building and analyzing the correlation among the SEs measured by different methods, including the near-field scanning, transverse electromagnetic (TEM) cell and reverberation chamber.
- 9 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 11 (8) , 1235-1242
Near-Field Scanning Based Shielding Effectiveness Analysis of System in Package
The electromagnetic interference (EMI) problems are crucial for system-in-package (SiP) due to the high demand of miniaturization and dense integration. Shielding methods are generally employed to protect SiP from EMI, through assessing the key performance index, i.e., shielding effectiveness (SE). In this article, the SE of a SiP is evaluated by using near-field scanning method. The SEs derived by using maximum near-field values and average near-field values are comparatively analyzed. The difference in near-field patterns of the unshielded and shielded SiPs may incur overestimation of the SE by using maximum field values. Both simulation and measurement results manifest that the gap between SiP and printed circuit board (PCB) will significantly change the radiation pattern of a shielded SiP, and thus has a great impact on the SE, especially when the frequency is above 1 GHz. However, a good correlation is found between the SE based on average near-field and the SE derived from the radiated power. This study has revealed the near-field shielding properties of SiP, which is helpful for building and analyzing the correlation among the SEs measured by different methods, including the near-field scanning, transverse electromagnetic (TEM) cell and reverberation chamber.
- 5 July 2021
- Published by Wiley in International Journal of Numerical Modelling: Electronic Networks, Devices and Fields
- Vol. 35 (6) , e2931
Impedance calculation of power ground grid by using artificial neural network
The power distribution network (PDN) is an essential component in high speed circuits, and the impedance calculation of PDN becomes a hot topic. In this paper, we proposed a method to calculate the impedance of power ground grid (PGG), which is one type of the PDN, by using artificial neural network (ANN). First, the PGG is equivalent to a simple power ground plane (PGP). The equivalent PGP has the same dimension and port location but different relative permittivity and relative permeability of the substrate compared to the original PGG. Then, ANN is used to calculate the equivalent and of the equivalent PGP. Thus, the impedance of equivalent PGP can be obtained by using Green's function. The proposed method has been validated by numerical and measurement examples. The agreement and difference of the impedance results in both examples are also analyzed.
- 5 July 2021
- Published by Wiley in International Journal of Numerical Modelling: Electronic Networks, Devices and Fields
- Vol. 35 (6) , e2931
Impedance calculation of power ground grid by using artificial neural network
The power distribution network (PDN) is an essential component in high speed circuits, and the impedance calculation of PDN becomes a hot topic. In this paper, we proposed a method to calculate the impedance of power ground grid (PGG), which is one type of the PDN, by using artificial neural network (ANN). First, the PGG is equivalent to a simple power ground plane (PGP). The equivalent PGP has the same dimension and port location but different relative permittivity and relative permeability of the substrate compared to the original PGG. Then, ANN is used to calculate the equivalent and of the equivalent PGP. Thus, the impedance of equivalent PGP can be obtained by using Green's function. The proposed method has been validated by numerical and measurement examples. The agreement and difference of the impedance results in both examples are also analyzed.
- 5 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 63 (6) , 2074-2081
A Hybrid Schatten p-Norm and Lp-Norm With Plane Wave Expansion Method for Near–Near Field Transformation
Near field scanning is one of the most useful methods for electromagnetic interference (EMI) diagnosis. However, large scanning points and long scanning time are the major obstacles when the device under test is complex. To resolve the issue, a novel hybrid method including two steps to quickly predict the near field pattern of an unknown EMI source is proposed. The first step is to reconstruct a full field pattern from a sparse scanning using the joint Schatten p -norm and Lp -norm method, where less sampling points are required on the original scanning plane. The second step is the near–near field transformation based on the plane wave spectrum method. It uses one single field pattern to derive the field distributions on multiplanes around the EMI source by introducing a calibration factor. The source reconstruction method in the second step can also be used to predict far field and coupled power to the victim circuit. Both simulation and experimental examples have validated the feasibility of the proposed method.
- 5 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 63 (6) , 2074-2081
A Hybrid Schatten p-Norm and Lp-Norm With Plane Wave Expansion Method for Near–Near Field Transformation
Near field scanning is one of the most useful methods for electromagnetic interference (EMI) diagnosis. However, large scanning points and long scanning time are the major obstacles when the device under test is complex. To resolve the issue, a novel hybrid method including two steps to quickly predict the near field pattern of an unknown EMI source is proposed. The first step is to reconstruct a full field pattern from a sparse scanning using the joint Schatten p -norm and Lp -norm method, where less sampling points are required on the original scanning plane. The second step is the near–near field transformation based on the plane wave spectrum method. It uses one single field pattern to derive the field distributions on multiplanes around the EMI source by introducing a calibration factor. The source reconstruction method in the second step can also be used to predict far field and coupled power to the victim circuit. Both simulation and experimental examples have validated the feasibility of the proposed method.
- 18 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 31 (2) , 211-214
A Deembedding Method for the S-Parameter Extraction of Surface-Mounted Devices With Asymmetric Fixtures
This letter presents a deembedding method for the S-parameter extraction of surface-mounted devices (SMDs) with asymmetric fixtures. The proposed method can remove the effects of asymmetric fixtures on the SMDs. It extracts the unknown S-parameters of the fixtures and SMD by combining frequency and time domains S-parameters. The accuracy of the proposed method is compared to that of the traditional 2X-thru deembedding method. The advantage of the proposed method is that it can reduce the testing time for asymmetric fixtures. Numerical examples and measurement are carried out for the validation of the proposed deembedding method.
- 18 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 31 (2) , 211-214
A Deembedding Method for the S-Parameter Extraction of Surface-Mounted Devices With Asymmetric Fixtures
This letter presents a deembedding method for the S-parameter extraction of surface-mounted devices (SMDs) with asymmetric fixtures. The proposed method can remove the effects of asymmetric fixtures on the SMDs. It extracts the unknown S-parameters of the fixtures and SMD by combining frequency and time domains S-parameters. The accuracy of the proposed method is compared to that of the traditional 2X-thru deembedding method. The advantage of the proposed method is that it can reduce the testing time for asymmetric fixtures. Numerical examples and measurement are carried out for the validation of the proposed deembedding method.
- 30 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Multiscale and Multiphysics Computational Techniques
- Vol. 5, 227-234
Equivalent Electromagnetic Hybrid Dipole Based on Cascade-Forward Neural Network to Predict Near-Field Magnitude of Complex Environmental Radiation
This paper proposes a new method to predict the radiation field in a complex environment. The magnetic field probe is used to scan the magnitude of the radiation field, and a cascade-forward neural network (CFNN) is introduced to establish the non-linear relationship between the Green's function and the magnitude of the radiation field. The trained CFNN can replace the real radiation source in a complex environment and produce the same radiation field, which is helpful to analyze electromagnetic interference (EMI) problems. The innovation of this paper is to establish an equivalent source based on only scanning the magnitude of the radiation field. At the same time, the electric current source and the magnetic current source of the radiator are equivalent to electric dipoles and magnetic dipoles, respectively. After CFNN training, we can predict the radiation field beyond the scanning plane. Simulation and measurement examples are used to verify the effectiveness of the proposed method.
- 30 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Multiscale and Multiphysics Computational Techniques
- Vol. 5, 227-234
Equivalent Electromagnetic Hybrid Dipole Based on Cascade-Forward Neural Network to Predict Near-Field Magnitude of Complex Environmental Radiation
This paper proposes a new method to predict the radiation field in a complex environment. The magnetic field probe is used to scan the magnitude of the radiation field, and a cascade-forward neural network (CFNN) is introduced to establish the non-linear relationship between the Green's function and the magnitude of the radiation field. The trained CFNN can replace the real radiation source in a complex environment and produce the same radiation field, which is helpful to analyze electromagnetic interference (EMI) problems. The innovation of this paper is to establish an equivalent source based on only scanning the magnitude of the radiation field. At the same time, the electric current source and the magnetic current source of the radiator are equivalent to electric dipoles and magnetic dipoles, respectively. After CFNN training, we can predict the radiation field beyond the scanning plane. Simulation and measurement examples are used to verify the effectiveness of the proposed method.
- 20 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Wide-Band Near-Field Prediction of Unknown EM Source Based on Artificial Neural Network
In this paper, we propose a wideband radiation field prediction method based on artificial neural networks. This method makes up for the shortcomings of multiple measurements of single frequency points of traditional methods. At the same time, using the learning ability of ANN, we can only predict the radiation field by scanning the near-field magnitude. In the experiment, we scanned the near-field magnitude information of the radiation source at 100 MHz, 300 MHz, and 500 MHz. After training with the neural network, we can predict the near-field radiation of 100 MHz - 500 MHz, which proves the effectiveness of this method. This is a new approach to the Electromagnetic interference (EMI) problem.
- 20 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Wide-Band Near-Field Prediction of Unknown EM Source Based on Artificial Neural Network
In this paper, we propose a wideband radiation field prediction method based on artificial neural networks. This method makes up for the shortcomings of multiple measurements of single frequency points of traditional methods. At the same time, using the learning ability of ANN, we can only predict the radiation field by scanning the near-field magnitude. In the experiment, we scanned the near-field magnitude information of the radiation source at 100 MHz, 300 MHz, and 500 MHz. After training with the neural network, we can predict the near-field radiation of 100 MHz - 500 MHz, which proves the effectiveness of this method. This is a new approach to the Electromagnetic interference (EMI) problem.
- 20 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Review of Near-Field EMI Measurement
In this paper, the near-field electromagnetic interference (EMI) measurement technology is summarized. Based on it, the source reconstruction method is used to simplify the complex EMI source modeling. A multi-components probe is developed to save the valuable testing time. The near-field measurement show several advantages over the traditional far-field measurement methods due to its low-cost and ability to detect weak radiations, especially for the shielding effectiveness measurement of smaller devices.
- 20 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Review of Near-Field EMI Measurement
In this paper, the near-field electromagnetic interference (EMI) measurement technology is summarized. Based on it, the source reconstruction method is used to simplify the complex EMI source modeling. A multi-components probe is developed to save the valuable testing time. The near-field measurement show several advantages over the traditional far-field measurement methods due to its low-cost and ability to detect weak radiations, especially for the shielding effectiveness measurement of smaller devices.
- 6 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 68 (10) , 4161-4168
An EM Imaging Method Based on Plane-Wave Spectrum and Transmission Line Model
There is a great demand and challenge for the nondestructive detection of an unknown electromagnetic interference (EMI) radiation source inside the printed circuit board (PCB). In this article, an electromagnetic imaging method based on the plane-wave spectrum and transmission line model is proposed. By scanning the radiated field outside the PCB and calibrating the electric or magnetic probe with a reference source, the field inside the PCB can be evaluated, and the image of the unknown radiation source inside the PCB can thus be predicted. The proposed method is validated by simulation and measurement examples. Correlation coefficients between the predicted field and the reference are larger than 0.9, which reveals the good accuracy of the proposed method. This method will be greatly applicable in determining the EMI sources inside electronic devices.
- 6 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 68 (10) , 4161-4168
An EM Imaging Method Based on Plane-Wave Spectrum and Transmission Line Model
There is a great demand and challenge for the nondestructive detection of an unknown electromagnetic interference (EMI) radiation source inside the printed circuit board (PCB). In this article, an electromagnetic imaging method based on the plane-wave spectrum and transmission line model is proposed. By scanning the radiated field outside the PCB and calibrating the electric or magnetic probe with a reference source, the field inside the PCB can be evaluated, and the image of the unknown radiation source inside the PCB can thus be predicted. The proposed method is validated by simulation and measurement examples. Correlation coefficients between the predicted field and the reference are larger than 0.9, which reveals the good accuracy of the proposed method. This method will be greatly applicable in determining the EMI sources inside electronic devices.