Jan-Lucas Wree
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jan-Lucas Wree has a total of 67 co-authors. Here are the top co-authors by number of shared publications:
- Anjana Devi
Leibniz Institute for Solid State and Materials Research
13 shared publications - David Zanders
Inorganic Materials Chemistry, Ruhr University Bochum, Universitätsstr. 150, 44801 Bochum, Germany
5 shared publications Detlef Rogalla
RUBION, Ruhr University Bochum, Universitätsstr. 150, 44801 Bochum, Germany
5 shared publications- Aleksander Kostka
Ruhr University Bochum
4 shared publications - Detlef Rogalla
RUBION Ruhr University Bochum Bochum Germany
4 shared publications - Nils Boysen
Fraunhofer IMS
4 shared publications
Latest Publications
- 22 December 2023
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2023-02 (16) , 1158
High Surface Area MoS2 and WS2 As Active HER Catalysts
The ever-increasing demand for clean energy necessitates a widespread adoption of clean energy carriers, namely green hydrogen. However, its production via electrolysis remains expensive. To achieve the needed drop in production cost, efficient catalyst materials are sought after to overcome the energy barrier of water splitting. Transition metal dichalcogenides (TMDCs) such as tungsten and molybdenum disulfide (WS2, MoS2) have been identified as promising catalysts because of their remarkably low Gibbs free energy for hydrogen adsorption.[1] The main challenge for these materials is the precise fabrication of continuous (mono)layers to achieve the desired functional properties.[2] Bottom-up material fabrication approaches like the vapor phase methods CVD and ALD offer several advantages. The use of chemical reactions of gas phase species allows precise thickness control, high quality films and allow large areas to be coated. This study focused on the fabrication of WS2 and MoS2 layers via metal organic chemical vapor deposition (MOCVD) and subsequent investigation of the properties of the resulting films in relation to the applied process conditions. Depositions were performed on FTO substrates and their thickness dependent capability to catalyze the electrochemical hydrogen evolution reaction (HER) were investigated in detail. For WS2 the selective growth of the semiconducting hexagonal phase with the targeted stoichiometry at a deposition temperature of 600°C was achieved (Fig 1 a). Similarly, in the case of MoS2, the hexagonal phase could be selectively deposited from 400 °C onwards and with pronounced crystallinity at 600°C (Fig. 1 b) which also showed the best stochiometric match and highest purity. The thin film characterization was further supported by Raman spectroscopy which serves as probe to verify the formed phase and layer number for 2D-materials. UV-VIS spectroscopy was employed to assess the semiconducting behavior allowing for band gap determination via the Tauc plot. Morphology and surface topography, especially interesting in the realm of HER catalysis, were assessed by SEM and HR-TEM showing the typical flakelike features known for these materials in their hexagonal phase (Fig 1 c). Electrochemical LSV experiments of WS2 in H2SO4 showed thickness dependence of the overpotentials which correlates with the flake density and the availability of vertical edge sites most active for HER (Fig 1 d). Similar studies for MoS2 are ongoing. These results are especially noteworthy as previous studies on WS2 deposited onto FTO have reported notably higher overpotentials.[3,4] This study demonstrates the potential of large area and high surface area TMDCs as effective HER electrocatalysts. [1] S. H. Noh, J. Hwang, J. Kang, M. H. Seo, D. Choi, B. Han, J. Mater. Chem. A 2018, 6, 20005–20014. [2] K. S. Novoselov, D. Jiang, A. K. Geim, et al. Proc. Natl. Acad. Sci. U.S.A. 2005, 102, 10451–10453. [3] J.-L. Wree, J.-P. Glauber, A. Devi, et al. J. Mater. Chem. C 2021, 9, 10254–10265. [4] J.-L. Wree, E. Ciftyurek, A. Devi, et al. Dalton Trans. 2020, 49, 13462–13474. Figure 1
- 22 December 2023
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2023-02 (16) , 1158
High Surface Area MoS2 and WS2 As Active HER Catalysts
The ever-increasing demand for clean energy necessitates a widespread adoption of clean energy carriers, namely green hydrogen. However, its production via electrolysis remains expensive. To achieve the needed drop in production cost, efficient catalyst materials are sought after to overcome the energy barrier of water splitting. Transition metal dichalcogenides (TMDCs) such as tungsten and molybdenum disulfide (WS2, MoS2) have been identified as promising catalysts because of their remarkably low Gibbs free energy for hydrogen adsorption.[1] The main challenge for these materials is the precise fabrication of continuous (mono)layers to achieve the desired functional properties.[2] Bottom-up material fabrication approaches like the vapor phase methods CVD and ALD offer several advantages. The use of chemical reactions of gas phase species allows precise thickness control, high quality films and allow large areas to be coated. This study focused on the fabrication of WS2 and MoS2 layers via metal organic chemical vapor deposition (MOCVD) and subsequent investigation of the properties of the resulting films in relation to the applied process conditions. Depositions were performed on FTO substrates and their thickness dependent capability to catalyze the electrochemical hydrogen evolution reaction (HER) were investigated in detail. For WS2 the selective growth of the semiconducting hexagonal phase with the targeted stoichiometry at a deposition temperature of 600°C was achieved (Fig 1 a). Similarly, in the case of MoS2, the hexagonal phase could be selectively deposited from 400 °C onwards and with pronounced crystallinity at 600°C (Fig. 1 b) which also showed the best stochiometric match and highest purity. The thin film characterization was further supported by Raman spectroscopy which serves as probe to verify the formed phase and layer number for 2D-materials. UV-VIS spectroscopy was employed to assess the semiconducting behavior allowing for band gap determination via the Tauc plot. Morphology and surface topography, especially interesting in the realm of HER catalysis, were assessed by SEM and HR-TEM showing the typical flakelike features known for these materials in their hexagonal phase (Fig 1 c). Electrochemical LSV experiments of WS2 in H2SO4 showed thickness dependence of the overpotentials which correlates with the flake density and the availability of vertical edge sites most active for HER (Fig 1 d). Similar studies for MoS2 are ongoing. These results are especially noteworthy as previous studies on WS2 deposited onto FTO have reported notably higher overpotentials.[3,4] This study demonstrates the potential of large area and high surface area TMDCs as effective HER electrocatalysts. [1] S. H. Noh, J. Hwang, J. Kang, M. H. Seo, D. Choi, B. Han, J. Mater. Chem. A 2018, 6, 20005–20014. [2] K. S. Novoselov, D. Jiang, A. K. Geim, et al. Proc. Natl. Acad. Sci. U.S.A. 2005, 102, 10451–10453. [3] J.-L. Wree, J.-P. Glauber, A. Devi, et al. J. Mater. Chem. C 2021, 9, 10254–10265. [4] J.-L. Wree, E. Ciftyurek, A. Devi, et al. Dalton Trans. 2020, 49, 13462–13474. Figure 1
- 22 December 2023
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2023-02 (16) , 1169
Phase Controlled Synthesis and Characterization of Large Area 2D Tin Sulfides
Motivated by the increasing need to shift the energy sector from fossil fuels towards renewables, two-dimensional (2D) layered material systems have been explored as potential candidates for energy harvesting and storage applications.[1] In particular, 2D tin sulfides (SnS and SnS2) have emerged as promising candidate materials for photovoltaic and battery applications due to their high earth abundance and non-toxic nature.[2,3] The dual valency of tin and the numerous oxidation states of sulfur can result in three thermodynamically stable polymorphic phases namely SnS, SnS2 and Sn2S3. Thus, phase-controlled synthesis of SnSx materials can be challenging. A detailed investigation of material properties of SnSx is essential to correlate the structure property relationship. Gas phase synthesis such as chemical vapor deposition (CVD) enables the tuning of material phase by choosing suitable precursor chemistries, substrates as well as varying the process parameters such as temperature and pressure. In this study we have developed a new CVD process for the synthesis of SnSx thin films on Si and mica substrates using a combination of a metalorganic precursor for tin and elemental sulfur under mild process conditions. Complementary thin film analysis using X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), Rutherford backscattering spectrometry (RBS), nuclear reaction analysis (NRA) and X-ray photoelectron spectroscopy (XPS) were performed. While XRD and Raman revealed the fabrication of phase pure crystalline SnS2 on both Si(100) and mica, XPS indicated inclusion of SnS species that couldn’t be identified unambiguously via XRD (Figure 1). A band gap of 2.2 eV estimated via UV-Vis spectroscopy further confirms the deposition of phase pure crystalline SnS2 layers. These new findings are very promising and pave a way to grow large area and phase controlled SnSx layers that can be suitable for potential functional applications such as batteries, photovoltaics, sensors etc. Figure 1
- 22 December 2023
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2023-02 (16) , 1169
Phase Controlled Synthesis and Characterization of Large Area 2D Tin Sulfides
Motivated by the increasing need to shift the energy sector from fossil fuels towards renewables, two-dimensional (2D) layered material systems have been explored as potential candidates for energy harvesting and storage applications.[1] In particular, 2D tin sulfides (SnS and SnS2) have emerged as promising candidate materials for photovoltaic and battery applications due to their high earth abundance and non-toxic nature.[2,3] The dual valency of tin and the numerous oxidation states of sulfur can result in three thermodynamically stable polymorphic phases namely SnS, SnS2 and Sn2S3. Thus, phase-controlled synthesis of SnSx materials can be challenging. A detailed investigation of material properties of SnSx is essential to correlate the structure property relationship. Gas phase synthesis such as chemical vapor deposition (CVD) enables the tuning of material phase by choosing suitable precursor chemistries, substrates as well as varying the process parameters such as temperature and pressure. In this study we have developed a new CVD process for the synthesis of SnSx thin films on Si and mica substrates using a combination of a metalorganic precursor for tin and elemental sulfur under mild process conditions. Complementary thin film analysis using X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), Rutherford backscattering spectrometry (RBS), nuclear reaction analysis (NRA) and X-ray photoelectron spectroscopy (XPS) were performed. While XRD and Raman revealed the fabrication of phase pure crystalline SnS2 on both Si(100) and mica, XPS indicated inclusion of SnS species that couldn’t be identified unambiguously via XRD (Figure 1). A band gap of 2.2 eV estimated via UV-Vis spectroscopy further confirms the deposition of phase pure crystalline SnS2 layers. These new findings are very promising and pave a way to grow large area and phase controlled SnSx layers that can be suitable for potential functional applications such as batteries, photovoltaics, sensors etc. Figure 1
- Open Access
- 23 October 2023
- Published by American Vacuum Society in Surface Science Spectra
- Vol. 30 (2)
Fe2O3-graphitic carbon nitride nanocomposites analyzed by XPS
Nanocomposite systems based on iron(III) oxide (Fe2O3) and graphitic carbon nitride (gCN) possess a great potential as photo(electro)catalysts for environmental remediation and energy generation. In this field, a key issue is the fabrication of supported materials directly grown onto suitable substrates and possessing tailored features. In the present study, Fe2O3–gCN nanomaterials are prepared by an innovative two-step strategy, consisting of initial plasma assisted-chemical vapor deposition of iron(III) oxide on conducting glass substrates and subsequent functionalization with low amounts of gCN by a facile electrophoretic deposition process. Attention is dedicated to the use of two different forms of carbon nitride, obtained from melamine or melamine + cyanuric acid, in order to finely tune the resulting material composition. In this work, x-ray photoelectron spectroscopy was used to characterize the pristine Fe2O3 deposit as well as two Fe2O3–gCN composite materials prepared starting from different gCN powders. A detailed analysis of the obtained spectroscopic data reveals the occurrence of a direct electronic interplay between single constituents, dependent on material characteristics. The related results may act as useful guidelines for the design of photo(electro)catalysts endowed with specific properties, of importance for sustainable applications.
- 23 October 2023
- Published by American Vacuum Society in Surface Science Spectra
- Vol. 30 (2)
Open AccessFe2O3-graphitic carbon nitride nanocomposites analyzed by XPS
Nanocomposite systems based on iron(III) oxide (Fe2O3) and graphitic carbon nitride (gCN) possess a great potential as photo(electro)catalysts for environmental remediation and energy generation. In this field, a key issue is the fabrication of supported materials directly grown onto suitable substrates and possessing tailored features. In the present study, Fe2O3–gCN nanomaterials are prepared by an innovative two-step strategy, consisting of initial plasma assisted-chemical vapor deposition of iron(III) oxide on conducting glass substrates and subsequent functionalization with low amounts of gCN by a facile electrophoretic deposition process. Attention is dedicated to the use of two different forms of carbon nitride, obtained from melamine or melamine + cyanuric acid, in order to finely tune the resulting material composition. In this work, x-ray photoelectron spectroscopy was used to characterize the pristine Fe2O3 deposit as well as two Fe2O3–gCN composite materials prepared starting from different gCN powders. A detailed analysis of the obtained spectroscopic data reveals the occurrence of a direct electronic interplay between single constituents, dependent on material characteristics. The related results may act as useful guidelines for the design of photo(electro)catalysts endowed with specific properties, of importance for sustainable applications.
- Open Access
- 8 September 2023
- Published by Wiley in Advanced Engineering Materials
- Vol. 25 (21)
Ultrashort‐Pulsed‐Laser Annealing of Amorphous Atomic‐Layer‐Deposited MoS2 Films
To implement 2D molybdenum disulfide (MoS2) in the flexible electronic industry, large, uniform, and crystalline films on flexible substrates are needed. Thermal atomic layer deposition (ALD) generates large‐area uniform MoS2 films at low temperatures directly on temperature‐sensitive substrates. But if the grown films are amorphous, a high‐temperature posttreatment of the whole sample, which may cause thermal degradation of the substrate or other layers, needs to be avoided. In this article, the crystallization of amorphous MoS2 layers deposited by thermal ALD processed with picosecond laser pulses (λ = 532 nm), in a “cold” annealing process, is reported. The laser fluence range varies from = 8.73 mJ cm−2 to = 18.25 mJ cm−2 with scanning speeds from = 240 mm s−1 to = 2640 mm s−1. The crystallization and the influence of the processing parameters on the film morphology are analyzed in detail by Raman spectroscopy and scanning electron microscopy. Furthermore, a transition of amorphous MoS2 by laser annealing to self‐organized patterns is demonstrated and a possible process mechanism for the ultrashort‐pulsed (usp)‐laser annealing is discussed. Finally, the usp laser annealed films are compared to thermally and continuous‐wave‐laser‐annealed samples.
- 8 September 2023
- Published by Wiley in Advanced Engineering Materials
- Vol. 25 (21)
Open AccessUltrashort‐Pulsed‐Laser Annealing of Amorphous Atomic‐Layer‐Deposited MoS2 Films
To implement 2D molybdenum disulfide (MoS2) in the flexible electronic industry, large, uniform, and crystalline films on flexible substrates are needed. Thermal atomic layer deposition (ALD) generates large‐area uniform MoS2 films at low temperatures directly on temperature‐sensitive substrates. But if the grown films are amorphous, a high‐temperature posttreatment of the whole sample, which may cause thermal degradation of the substrate or other layers, needs to be avoided. In this article, the crystallization of amorphous MoS2 layers deposited by thermal ALD processed with picosecond laser pulses (λ = 532 nm), in a “cold” annealing process, is reported. The laser fluence range varies from = 8.73 mJ cm−2 to = 18.25 mJ cm−2 with scanning speeds from = 240 mm s−1 to = 2640 mm s−1. The crystallization and the influence of the processing parameters on the film morphology are analyzed in detail by Raman spectroscopy and scanning electron microscopy. Furthermore, a transition of amorphous MoS2 by laser annealing to self‐organized patterns is demonstrated and a possible process mechanism for the ultrashort‐pulsed (usp)‐laser annealing is discussed. Finally, the usp laser annealed films are compared to thermally and continuous‐wave‐laser‐annealed samples.
- 8 March 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (11) , 14502-14512
Plasma-Enhanced Atomic Layer Deposition of Molybdenum Oxide Thin Films at Low Temperatures for Hydrogen Gas Sensing
Molybdenum oxide thin films are very appealing for gas sensing applications due to their tunable material characteristics. Particularly, the growing demand for developing hydrogen sensors has triggered the exploration of functional materials such as molybdenum oxides (MoOx). Strategies to enhance the performance of MoOx-based gas sensors include nanostructured growth accompanied by precise control of composition and crystallinity. These features can be delivered by using atomic layer deposition (ALD) processing of thin films, where precursor chemistry plays an important role. Herein, we report a new plasma-enhanced ALD process for molybdenum oxide employing the molybdenum precursor [Mo(NtBu)2(tBu2DAD)] (DAD = diazadienyl) and oxygen plasma. Analysis of the film thickness reveals typical ALD characteristics such as linearity and surface saturation with a growth rate of 0.75 Å/cycle in a broad temperature window between 100 and 240 °C. While the films are amorphous at 100 °C, crystalline β-MoO3 is obtained at 240 °C. Compositional analysis reveals nearly stoichiometric and pure MoO3 films with oxygen vacancies present at the surface. Subsequently, hydrogen gas sensitivity of the molybdenum oxide thin films is demonstrated in a laboratory-scale chemiresistive hydrogen sensor setup at an operation temperature of 120 °C. Sensitivities of up to 18% are achieved for the film deposited at 240 °C, showing a strong correlation between crystallinity, oxygen vacancies at the surface, and hydrogen gas sensitivity.
- 8 March 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (11) , 14502-14512
Plasma-Enhanced Atomic Layer Deposition of Molybdenum Oxide Thin Films at Low Temperatures for Hydrogen Gas Sensing
Molybdenum oxide thin films are very appealing for gas sensing applications due to their tunable material characteristics. Particularly, the growing demand for developing hydrogen sensors has triggered the exploration of functional materials such as molybdenum oxides (MoOx). Strategies to enhance the performance of MoOx-based gas sensors include nanostructured growth accompanied by precise control of composition and crystallinity. These features can be delivered by using atomic layer deposition (ALD) processing of thin films, where precursor chemistry plays an important role. Herein, we report a new plasma-enhanced ALD process for molybdenum oxide employing the molybdenum precursor [Mo(NtBu)2(tBu2DAD)] (DAD = diazadienyl) and oxygen plasma. Analysis of the film thickness reveals typical ALD characteristics such as linearity and surface saturation with a growth rate of 0.75 Å/cycle in a broad temperature window between 100 and 240 °C. While the films are amorphous at 100 °C, crystalline β-MoO3 is obtained at 240 °C. Compositional analysis reveals nearly stoichiometric and pure MoO3 films with oxygen vacancies present at the surface. Subsequently, hydrogen gas sensitivity of the molybdenum oxide thin films is demonstrated in a laboratory-scale chemiresistive hydrogen sensor setup at an operation temperature of 120 °C. Sensitivities of up to 18% are achieved for the film deposited at 240 °C, showing a strong correlation between crystallinity, oxygen vacancies at the surface, and hydrogen gas sensitivity.
- 9 November 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (46) , 52149-52162
High-Performance Iridium Thin Films for Water Splitting by CVD Using New Ir(I) Precursors
Thin films of iridium can be utilized in a wide range of applications and are particularly interesting for catalytic transformations. For the scalable deposition of functional Ir thin films, metalorganic chemical vapor deposition (MOCVD) is the method of choice, for which organometallic precursors that embody a high volatility and thermal stability need to be specifically tailored. Herein, we report the synthesis, analysis, and evaluation of new volatile Ir(I)-1,5-cyclooctadiene complexes bearing all-nitrogen coordinating guanidinate (N,N'-diisopropyl-2-dimethylamido-guanidinate (DPDMG)), amidinate (N,N'-diisopropyl-amidinate (DPAMD)), and formamidinate (N,N'-diisopropyl-formamidinate (DPfAMD)) ligands. The amidinate-based Ir complex [Ir(COD)(DPAMD)] together with O2 was implemented in MOCVD experiments resulting in highly crystalline, dense, and conductive Ir films on a variety of substrate materials. The Ir deposits achieved outstanding electrochemical performance with overpotentials in the range of 50 mV at -10 mA·cm-2 for catalytic hydrogen evolution reaction (HER) in acidic solution. The ability to deposit Ir layers via MOCVD exhibiting promising functional properties is a significant step toward large-scale applications.
- 9 November 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (46) , 52149-52162
High-Performance Iridium Thin Films for Water Splitting by CVD Using New Ir(I) Precursors
Thin films of iridium can be utilized in a wide range of applications and are particularly interesting for catalytic transformations. For the scalable deposition of functional Ir thin films, metalorganic chemical vapor deposition (MOCVD) is the method of choice, for which organometallic precursors that embody a high volatility and thermal stability need to be specifically tailored. Herein, we report the synthesis, analysis, and evaluation of new volatile Ir(I)-1,5-cyclooctadiene complexes bearing all-nitrogen coordinating guanidinate (N,N'-diisopropyl-2-dimethylamido-guanidinate (DPDMG)), amidinate (N,N'-diisopropyl-amidinate (DPAMD)), and formamidinate (N,N'-diisopropyl-formamidinate (DPfAMD)) ligands. The amidinate-based Ir complex [Ir(COD)(DPAMD)] together with O2 was implemented in MOCVD experiments resulting in highly crystalline, dense, and conductive Ir films on a variety of substrate materials. The Ir deposits achieved outstanding electrochemical performance with overpotentials in the range of 50 mV at -10 mA·cm-2 for catalytic hydrogen evolution reaction (HER) in acidic solution. The ability to deposit Ir layers via MOCVD exhibiting promising functional properties is a significant step toward large-scale applications.
- Open Access
- 1 November 2022
- Published by IOP Publishing in Materials Research Express
- Vol. 9 (11) , 116401
Nucleation and growth studies of large-area deposited WS2 on flexible substrates
Transition metal dichalcogenides (TMDCs) such as tungsten disulfide (WS2) are studied for advanced electronic and optical devices because of their unique and versatile electrical, optical and mechanical properties. For the use of TMDC films in next-generation flexible electronics, large-area bottom-up synthesis on flexible substrates needs to be mastered, understood and controlled. In this study, we performed a detailed study on the nucleation and growth of WS2 layers deposited by metalorganic chemical vapor deposition (MOCVD) on crystalline van-der-Waals material muscovite mica as a model substrate and on the alkali-metal free flexible glass AF 32® eco. The deposition of the WS2 layers was performed using an all nitrogen-coordinated bis-imido-bis-amido tungsten based precursor in combination with elemental sulfur as the co-reactant. On both substrates, crystalline growth of WS2 at a moderate growth temperature of 600 °C was verified by Raman spectroscopy and X-ray diffraction (XRD). However, the growth mode and nucleation density differ significantly. On mica, an initially planar growth of WS2 triangular islands is observed, whereas untreated glass reveals an out-off plane growth. Detailed XRD and Raman analysis show tensile strain in the WS2 films on both substrates, indicating a strong interaction from CVD grown TMDC films with the underlying carrier material. In order to avoid such substrate-semiconductor interaction, a substrate pre-treatment is required. A plasma pre-treatment prior to the deposition leads to a planar growth even on amorphous glass substrates.
- 1 November 2022
- Published by IOP Publishing in Materials Research Express
- Vol. 9 (11) , 116401
Open AccessNucleation and growth studies of large-area deposited WS2 on flexible substrates
Transition metal dichalcogenides (TMDCs) such as tungsten disulfide (WS2) are studied for advanced electronic and optical devices because of their unique and versatile electrical, optical and mechanical properties. For the use of TMDC films in next-generation flexible electronics, large-area bottom-up synthesis on flexible substrates needs to be mastered, understood and controlled. In this study, we performed a detailed study on the nucleation and growth of WS2 layers deposited by metalorganic chemical vapor deposition (MOCVD) on crystalline van-der-Waals material muscovite mica as a model substrate and on the alkali-metal free flexible glass AF 32® eco. The deposition of the WS2 layers was performed using an all nitrogen-coordinated bis-imido-bis-amido tungsten based precursor in combination with elemental sulfur as the co-reactant. On both substrates, crystalline growth of WS2 at a moderate growth temperature of 600 °C was verified by Raman spectroscopy and X-ray diffraction (XRD). However, the growth mode and nucleation density differ significantly. On mica, an initially planar growth of WS2 triangular islands is observed, whereas untreated glass reveals an out-off plane growth. Detailed XRD and Raman analysis show tensile strain in the WS2 films on both substrates, indicating a strong interaction from CVD grown TMDC films with the underlying carrier material. In order to avoid such substrate-semiconductor interaction, a substrate pre-treatment is required. A plasma pre-treatment prior to the deposition leads to a planar growth even on amorphous glass substrates.
- Open Access
- 26 October 2022
- Published by Wiley in Advanced Materials Interfaces
- Vol. 9 (35)
Unveiling Ruthenium(II) Diazadienyls for Gas Phase Deposition Processes: Low Resistivity Ru Thin Films and Their Performance in the Acidic Oxygen Evolution Reaction
Two novel ruthenium complexes belonging to the Ru(II)(DAD)(Cym) (DAD = diazadienyl) (Cym = cymene) compound family are introduced as promising precursors. Their chemical nature, potential for chemical vapor deposition (CVD), and possibly atomic layer deposition (ALD) are demonstrated. The development of nonoxidative CVD processes yielding high‐quality Ru thin films is realized. Chemical analyses are exercised that vitiate the deceptive assumption of Ru(DAD)(Aryl) complexes being zero‐valent through clear evidence for the redox noninnocence of the DAD ligand. Two different CVD routes for the growth of Ru films are developed using Ru(tBu2DAD)(Cym). Ru thin films from both processes are subjected to thorough and comparative analyses that allowed to deduce similarities and differences in film growth. Ru thin films with a thickness of 30–35 nm grown on SiO2 yielded close‐to‐bulk resistivity values ranging from 12 to 16 µΩ cm. Catalysis evaluation of the films in the acidic oxygen evolution reaction (OER) results in promising performances based on overpotentials as low as 240 mV with Tafel slopes of 45–50 mV dec−1. Based on the degradation observed during electrochemical measurements, the impact of OER conditions on the layers is critically assessed by complementary methods.
- 26 October 2022
- Published by Wiley in Advanced Materials Interfaces
- Vol. 9 (35)
Open AccessUnveiling Ruthenium(II) Diazadienyls for Gas Phase Deposition Processes: Low Resistivity Ru Thin Films and Their Performance in the Acidic Oxygen Evolution Reaction
Two novel ruthenium complexes belonging to the Ru(II)(DAD)(Cym) (DAD = diazadienyl) (Cym = cymene) compound family are introduced as promising precursors. Their chemical nature, potential for chemical vapor deposition (CVD), and possibly atomic layer deposition (ALD) are demonstrated. The development of nonoxidative CVD processes yielding high‐quality Ru thin films is realized. Chemical analyses are exercised that vitiate the deceptive assumption of Ru(DAD)(Aryl) complexes being zero‐valent through clear evidence for the redox noninnocence of the DAD ligand. Two different CVD routes for the growth of Ru films are developed using Ru(tBu2DAD)(Cym). Ru thin films from both processes are subjected to thorough and comparative analyses that allowed to deduce similarities and differences in film growth. Ru thin films with a thickness of 30–35 nm grown on SiO2 yielded close‐to‐bulk resistivity values ranging from 12 to 16 µΩ cm. Catalysis evaluation of the films in the acidic oxygen evolution reaction (OER) results in promising performances based on overpotentials as low as 240 mV with Tafel slopes of 45–50 mV dec−1. Based on the degradation observed during electrochemical measurements, the impact of OER conditions on the layers is critically assessed by complementary methods.
- Open Access
- 10 October 2022
- Published by Wiley in Advanced Materials Technologies
- Vol. 8 (1)
Silver Thin‐Film Electrodes Grown by Low‐Temperature Plasma‐Enhanced Spatial Atomic Layer Deposition at Atmospheric Pressure
The unique properties of atomic layer deposition (ALD) are mainly exploited for metal oxides, while the growth of metals, such as silver, is still in its infancy. Low growth temperatures and high growth rates are essential to achieve conductive (i.e. percolated) films. Here, a study based on the authors’ recently introduced N‐heterocyclic carbene‐based Ag amide precursor [(NHC)Ag(hmds)] (1,3‐di‐tert‐butyl‐imidazolin‐2‐ylidene silver(I) 1,1,1‐trimethyl‐N‐(trimethylsilyl) silanaminide) using plasma‐enhanced spatial ALD at atmospheric pressure and at deposition temperatures as low as 60 °C, is provided. The favorable reactivity and high volatility of the [(NHC)Ag(hmds)] precursor affords high growth rates up to 3.4 × 1014 Ag atoms cm–2 per cycle, which are ≈2.5 times higher than that found with the established triethylphosphine(6,6,7,7,8,8,8‐heptafluoro‐2,2‐dimethyl‐3,5‐octanedionate) silver(I) [Ag(fod)(PEt3)] precursor. Consequently, highly conductive Ag films with resistivities as low as 2.7 µΩ cm are achieved at a deposition temperature of 100 °C with a percolation threshold of ≈2.6 × 1017 Ag atoms cm–2, which is more than 1.6 times lower compared to [Ag(fod)(PEt3)]. As a concept study, conductive Ag layers are used as bottom electrodes in organic solar cells, that achieve the same performance as those based on Ag electrodes resulting from a high vacuum process.
- 10 October 2022
- Published by Wiley in Advanced Materials Technologies
- Vol. 8 (1)
Open AccessSilver Thin‐Film Electrodes Grown by Low‐Temperature Plasma‐Enhanced Spatial Atomic Layer Deposition at Atmospheric Pressure
The unique properties of atomic layer deposition (ALD) are mainly exploited for metal oxides, while the growth of metals, such as silver, is still in its infancy. Low growth temperatures and high growth rates are essential to achieve conductive (i.e. percolated) films. Here, a study based on the authors’ recently introduced N‐heterocyclic carbene‐based Ag amide precursor [(NHC)Ag(hmds)] (1,3‐di‐tert‐butyl‐imidazolin‐2‐ylidene silver(I) 1,1,1‐trimethyl‐N‐(trimethylsilyl) silanaminide) using plasma‐enhanced spatial ALD at atmospheric pressure and at deposition temperatures as low as 60 °C, is provided. The favorable reactivity and high volatility of the [(NHC)Ag(hmds)] precursor affords high growth rates up to 3.4 × 1014 Ag atoms cm–2 per cycle, which are ≈2.5 times higher than that found with the established triethylphosphine(6,6,7,7,8,8,8‐heptafluoro‐2,2‐dimethyl‐3,5‐octanedionate) silver(I) [Ag(fod)(PEt3)] precursor. Consequently, highly conductive Ag films with resistivities as low as 2.7 µΩ cm are achieved at a deposition temperature of 100 °C with a percolation threshold of ≈2.6 × 1017 Ag atoms cm–2, which is more than 1.6 times lower compared to [Ag(fod)(PEt3)]. As a concept study, conductive Ag layers are used as bottom electrodes in organic solar cells, that achieve the same performance as those based on Ag electrodes resulting from a high vacuum process.
- 21 July 2022
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 4 (8) , 3772-3779
Ferromagnetic Cobalt Disulfide: A CVD Pathway Toward High-Quality and Phase-Pure Thin Films
- 21 July 2022
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 4 (8) , 3772-3779
Ferromagnetic Cobalt Disulfide: A CVD Pathway Toward High-Quality and Phase-Pure Thin Films