Benedikt Dorschner
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Benedikt Dorschner has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Iliya V. Karlin
Department of Mechanical and Process Engineering, ETH Zurich , 8092 Zurich
10 shared publications - Nilesh Sawant
Department of Mechanical and Process Engineering, ETH Zurich, Zurich 8092, Switzerland
3 shared publications - Seyed Ali Hosseini
Department of Mechanical and Process Engineering, ETH Zurich , 8092 Zurich
3 shared publications - Mohammad Hossein Saadat
Department of Mechanical and Process Engineering, ETH Zurich
2 shared publications Tim Colonius
California Institute of Technology
2 shared publications- Abhimanyu Bhadauria
Department of Mechanical and Process Engineering, ETH Zürich, 8092 Zürich, Switzerland
1 shared publication
Latest Publications
- Open Access
- 15 November 2025
- Published by Association for Computing Machinery (ACM)
- p. 14-24
Simulating many-engine spacecraft: Exceeding 1 quadrillion degrees of freedom via information geometric regularization
- 15 November 2025
- Published by Association for Computing Machinery (ACM)
- p. 14-24
Open AccessSimulating many-engine spacecraft: Exceeding 1 quadrillion degrees of freedom via information geometric regularization
- 16 January 2025
- Published by American Physical Society (APS) in Physical Review Fluids
- Vol. 10 (1)
Transition time of a bouncing drop
- 16 January 2025
- Published by American Physical Society (APS) in Physical Review Fluids
- Vol. 10 (1)
Transition time of a bouncing drop
- Open Access
- 1 July 2022
- Published by AIP Publishing in AIP Advances
- Vol. 12 (7) , 075107
Detonation modeling with the particles on demand method
A kinetic model based on the particles on demand method is introduced for gas phase detonation hydrodynamics in conjunction with the Lee–Tarver reaction model. The proposed model is realized on two- and three-dimensional lattices and is validated with a set of benchmarks. Quantitative validation is performed with the Chapman–Jouguet theory up to a detonation wave speed of Mach 20 in one dimension. Two-dimensional outward expanding circular detonation is tested for isotropy of the model as well as for the asymptotic detonation wave speed. Mach reflection angles are verified in setups consisting of interacting strong bow shocks emanating from detonation. Spherical detonation is computed to show the viability of the proposed model for three-dimensional simulations.
- 1 July 2022
- Published by AIP Publishing in AIP Advances
- Vol. 12 (7) , 075107
Open AccessDetonation modeling with the particles on demand method
A kinetic model based on the particles on demand method is introduced for gas phase detonation hydrodynamics in conjunction with the Lee–Tarver reaction model. The proposed model is realized on two- and three-dimensional lattices and is validated with a set of benchmarks. Quantitative validation is performed with the Chapman–Jouguet theory up to a detonation wave speed of Mach 20 in one dimension. Two-dimensional outward expanding circular detonation is tested for isotropy of the model as well as for the asymptotic detonation wave speed. Mach reflection angles are verified in setups consisting of interacting strong bow shocks emanating from detonation. Spherical detonation is computed to show the viability of the proposed model for three-dimensional simulations.
- Open Access
- 10 May 2022
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 941, A62
Consistent lattice Boltzmann model for reactive mixtures
A new lattice Boltzmann model (LBM) for chemically reactive mixtures is presented. The approach capitalizes on the recently introduced thermodynamically consistent LBM for multicomponent mixtures of ideal gases. Similar to the non-reactive case, the present LBM features Stefan–Maxwell diffusion of chemical species and a fully on-lattice mean-field realization of the momentum and energy of the flow. Besides introducing the reaction mechanism into the kinetic equations for the species, the proposed LBM also features a new realization of the compressible flow by using a concept of extended equilibrium on a standard lattice in three dimensions. The full thermodynamic consistency of the original non-reactive multicomponent LBM enables us to extend the temperature dynamics to the reactive mixtures by merely including the enthalpy of formation in addition to the sensible energy considered previously. Furthermore, we describe in detail the boundary conditions to be used for reactive flows of practical interest. The model is validated against a direct numerical simulation of various burning regimes of a hydrogen/air mixture in a microchannel, in two and three dimensions. Excellent comparison in these demanding benchmarks indicates that the proposed LBM can be a valuable and universal model for complex reactive flows.
- 10 May 2022
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 941, A62
Open AccessConsistent lattice Boltzmann model for reactive mixtures
A new lattice Boltzmann model (LBM) for chemically reactive mixtures is presented. The approach capitalizes on the recently introduced thermodynamically consistent LBM for multicomponent mixtures of ideal gases. Similar to the non-reactive case, the present LBM features Stefan–Maxwell diffusion of chemical species and a fully on-lattice mean-field realization of the momentum and energy of the flow. Besides introducing the reaction mechanism into the kinetic equations for the species, the proposed LBM also features a new realization of the compressible flow by using a concept of extended equilibrium on a standard lattice in three dimensions. The full thermodynamic consistency of the original non-reactive multicomponent LBM enables us to extend the temperature dynamics to the reactive mixtures by merely including the enthalpy of formation in addition to the sensible energy considered previously. Furthermore, we describe in detail the boundary conditions to be used for reactive flows of practical interest. The model is validated against a direct numerical simulation of various burning regimes of a hydrogen/air mixture in a microchannel, in two and three dimensions. Excellent comparison in these demanding benchmarks indicates that the proposed LBM can be a valuable and universal model for complex reactive flows.
- Open Access
Entropic multi-relaxation-time lattice Boltzmann model for large density ratio two-phase flows
We propose a multiple relaxation time entropic realization of a two-phase flow lattice Boltzmann model we introduced in earlier works arXiv:2112.01975 S.A. Hosseini, B. Dorschner, and I. V. Karlin, arXiv preprint, arXiv:2112.01975 (2021). While the original model with a single relaxation time allows us to reach large density ratios, it is limited in terms of stability with respect to non-dimensional viscosity and Courant--Friedrichs--Lewy number. Here we show that the entropic multiple relaxation time model extends the stability limits of the model significantly, which allows us to reach larger Reynolds numbers for a given grid resolution. The thermodynamic properties of the solver, using the Peng--Robinson equation of state, are studied first using simple configurations. Co-existence densities and temperature scaling of both the interface thickness and the surface tension are shown to agree well with theory. The model is then used to simulate the impact of a drop onto a thin liquid film with density and viscosity ratios matching those of water and air both in 2-D and 3-D. The results are in very good agreement with theoretically predicted scaling laws and experimental data.
Open AccessEntropic multi-relaxation-time lattice Boltzmann model for large density ratio two-phase flows
We propose a multiple relaxation time entropic realization of a two-phase flow lattice Boltzmann model we introduced in earlier works arXiv:2112.01975 S.A. Hosseini, B. Dorschner, and I. V. Karlin, arXiv preprint, arXiv:2112.01975 (2021). While the original model with a single relaxation time allows us to reach large density ratios, it is limited in terms of stability with respect to non-dimensional viscosity and Courant--Friedrichs--Lewy number. Here we show that the entropic multiple relaxation time model extends the stability limits of the model significantly, which allows us to reach larger Reynolds numbers for a given grid resolution. The thermodynamic properties of the solver, using the Peng--Robinson equation of state, are studied first using simple configurations. Co-existence densities and temperature scaling of both the interface thickness and the surface tension are shown to agree well with theory. The model is then used to simulate the impact of a drop onto a thin liquid film with density and viscosity ratios matching those of water and air both in 2-D and 3-D. The results are in very good agreement with theoretically predicted scaling laws and experimental data.
- Open Access
- 1 October 2021
- Published by AIP Publishing in Physics of Fluids
- Vol. 33 (10) , 106111
Lattice Boltzmann method for fluid–structure interaction in compressible flow
We present a two-way coupled fluid–structure interaction scheme for rigid bodies using a two-population lattice Boltzmann formulation for compressible flows. An arbitrary Lagrangian–Eulerian formulation of the discrete Boltzmann equation on body-fitted meshes is used in combination with polynomial blending functions. The blending function approach localizes mesh deformation and allows treating multiple moving bodies with a minimal computational overhead. We validate the model with several test cases of vortex induced vibrations of single and tandem cylinders and show that it can accurately describe dynamic behavior of these systems. Finally, in the compressible regime, we demonstrate that the proposed model accurately captures complex phenomena such as transonic flutter over an airfoil.
- 1 October 2021
- Published by AIP Publishing in Physics of Fluids
- Vol. 33 (10) , 106111
Open AccessLattice Boltzmann method for fluid–structure interaction in compressible flow
We present a two-way coupled fluid–structure interaction scheme for rigid bodies using a two-population lattice Boltzmann formulation for compressible flows. An arbitrary Lagrangian–Eulerian formulation of the discrete Boltzmann equation on body-fitted meshes is used in combination with polynomial blending functions. The blending function approach localizes mesh deformation and allows treating multiple moving bodies with a minimal computational overhead. We validate the model with several test cases of vortex induced vibrations of single and tandem cylinders and show that it can accurately describe dynamic behavior of these systems. Finally, in the compressible regime, we demonstrate that the proposed model accurately captures complex phenomena such as transonic flutter over an airfoil.
- Open Access
- 7 June 2021
- Published by American Physical Society (APS) in Physical Review E
- Vol. 103 (6) , 063305
Multiscale semi-Lagrangian lattice Boltzmann method
We present a multi-scale lattice Boltzmann scheme, which adaptively refines particles' velocity space. Different velocity sets of lower and higher order are consistently and efficiently coupled, allowing us to use the higher-order model only when and where needed. This includes regions of high Mach or high Knudsen numbers. The coupling procedure of discrete velocity sets consists of either a projection of the higher-order populations onto the lower-order lattice or lifting of the lower-order populations to the higher-order velocity space. Both lifting and projection are local operations, which enable a flexible adaptive velocity set. The proposed scheme is formulated for both a static and an optimal, co-moving reference frame, in the spirit of the recently introduced Particles on Demand method. The multi-scale scheme is validated with an advection of an athermal vortex and in a jet flow setup. The performance of the proposed scheme is further investigated in the shock structure problem and a high-Knudsen-number Couette flow, typical examples of highly non-equilibrium flows in which the order of the velocity set plays a decisive role. The results demonstrate that the proposed multi-scale scheme can operate accurately, with flexibility in terms of the underlying models and with reduced computational requirements.
- 7 June 2021
- Published by American Physical Society (APS) in Physical Review E
- Vol. 103 (6) , 063305
Open AccessMultiscale semi-Lagrangian lattice Boltzmann method
We present a multi-scale lattice Boltzmann scheme, which adaptively refines particles' velocity space. Different velocity sets of lower and higher order are consistently and efficiently coupled, allowing us to use the higher-order model only when and where needed. This includes regions of high Mach or high Knudsen numbers. The coupling procedure of discrete velocity sets consists of either a projection of the higher-order populations onto the lower-order lattice or lifting of the lower-order populations to the higher-order velocity space. Both lifting and projection are local operations, which enable a flexible adaptive velocity set. The proposed scheme is formulated for both a static and an optimal, co-moving reference frame, in the spirit of the recently introduced Particles on Demand method. The multi-scale scheme is validated with an advection of an athermal vortex and in a jet flow setup. The performance of the proposed scheme is further investigated in the shock structure problem and a high-Knudsen-number Couette flow, typical examples of highly non-equilibrium flows in which the order of the velocity set plays a decisive role. The results demonstrate that the proposed multi-scale scheme can operate accurately, with flexibility in terms of the underlying models and with reduced computational requirements.
- Open Access
Extended Lattice Boltzmann Model
Conventional lattice Boltzmann models for the simulation of fluid dynamics are restricted by an error in the stress tensor that is negligible only for small flow velocity and at a singular value of the temperature. To that end, we propose a unified formulation that restores Galilean invariance and the isotropy of the stress tensor by introducing an extended equilibrium. This modification extends lattice Boltzmann models to simulations with higher values of the flow velocity and can be used at temperatures that are higher than the lattice reference temperature, which enhances computational efficiency by decreasing the number of required time steps. Furthermore, the extended model also remains valid for stretched lattices, which are useful when flow gradients are predominant in one direction. The model is validated by simulations of two- and three-dimensional benchmark problems, including the double shear layer flow, the decay of homogeneous isotropic turbulence, the laminar boundary layer over a flat plate and the turbulent channel flow.
Open AccessExtended Lattice Boltzmann Model
Conventional lattice Boltzmann models for the simulation of fluid dynamics are restricted by an error in the stress tensor that is negligible only for small flow velocity and at a singular value of the temperature. To that end, we propose a unified formulation that restores Galilean invariance and the isotropy of the stress tensor by introducing an extended equilibrium. This modification extends lattice Boltzmann models to simulations with higher values of the flow velocity and can be used at temperatures that are higher than the lattice reference temperature, which enhances computational efficiency by decreasing the number of required time steps. Furthermore, the extended model also remains valid for stretched lattices, which are useful when flow gradients are predominant in one direction. The model is validated by simulations of two- and three-dimensional benchmark problems, including the double shear layer flow, the decay of homogeneous isotropic turbulence, the laminar boundary layer over a flat plate and the turbulent channel flow.
- Open Access
- 1 April 2021
- Published by AIP Publishing in Physics of Fluids
- Vol. 33 (4) , 046104
Extended lattice Boltzmann model for gas dynamics
We propose a two-population lattice Boltzmann model on standard lattices for the simulation of compressible flows. The model is fully on-lattice and uses the single relaxation time Bhatnagar–Gross–Krook kinetic equations along with appropriate correction terms to recover the Navier–Stokes–Fourier equations. The accuracy and performance of the model are analyzed through simulations of compressible benchmark cases including Sod shock tube, sound generation in shock–vortex interaction, and compressible decaying turbulence in a box with eddy shocklets. It is demonstrated that the present model provides an accurate representation of compressible flows, even in the presence of turbulence and shock waves.
- 1 April 2021
- Published by AIP Publishing in Physics of Fluids
- Vol. 33 (4) , 046104
Open AccessExtended lattice Boltzmann model for gas dynamics
We propose a two-population lattice Boltzmann model on standard lattices for the simulation of compressible flows. The model is fully on-lattice and uses the single relaxation time Bhatnagar–Gross–Krook kinetic equations along with appropriate correction terms to recover the Navier–Stokes–Fourier equations. The accuracy and performance of the model are analyzed through simulations of compressible benchmark cases including Sod shock tube, sound generation in shock–vortex interaction, and compressible decaying turbulence in a box with eddy shocklets. It is demonstrated that the present model provides an accurate representation of compressible flows, even in the presence of turbulence and shock waves.
- 12 March 2021
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 915
Flutter instability in an internal flow energy harvester
Vibration-based flow energy harvesting enables robust, in situ energy extraction for low-power applications, such as distributed sensor networks. Fluid–structure instabilities dictate a harvester's viability since the structural response to the flow determines its power output. Previous work on a flextensional based flow energy harvester demonstrated that an elastic member within a converging-diverging channel is susceptible to the aeroelastic flutter. This work explores the mechanism driving flutter through experiments and simulations. A model is then developed based on channel flow rate modulation and considering the effects of both normal and spanwise flow confinement on the instability. Linear stability analysis of the model replicates flutter onset, critical frequency and mode shapes observed in experiments. The model suggests that flow modulation through the channel throat is the principal mechanism for the fluid-induced vibration. The generalized model presented can serve as the foundation of design parameter exploration for energy harvesters, perhaps leading to more powerful devices in the future, but also to other similar flow geometries where the flutter instability arises in an elastic member within a narrow flow passage.
- 12 March 2021
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 915
Flutter instability in an internal flow energy harvester
Vibration-based flow energy harvesting enables robust, in situ energy extraction for low-power applications, such as distributed sensor networks. Fluid–structure instabilities dictate a harvester's viability since the structural response to the flow determines its power output. Previous work on a flextensional based flow energy harvester demonstrated that an elastic member within a converging-diverging channel is susceptible to the aeroelastic flutter. This work explores the mechanism driving flutter through experiments and simulations. A model is then developed based on channel flow rate modulation and considering the effects of both normal and spanwise flow confinement on the instability. Linear stability analysis of the model replicates flutter onset, critical frequency and mode shapes observed in experiments. The model suggests that flow modulation through the channel throat is the principal mechanism for the fluid-induced vibration. The generalized model presented can serve as the foundation of design parameter exploration for energy harvesters, perhaps leading to more powerful devices in the future, but also to other similar flow geometries where the flutter instability arises in an elastic member within a narrow flow passage.