Chao Li
Chao Li has a total of 138 co-authors. Here are the top co-authors by number of shared publications:
- Cuihua An
School of Mechanical Engineering, Hebei University of Technology, Tianjin 300401, China
5 shared publications Ruicong Xie
Tianjin Key Laboratory of Advanced Functional Porous Materials
5 shared publications- Jun Luo
ShenSi Lab, Shenzhen Institute for Advanced Study, University of Electronic Science and Technology of China, Longhua District, Shenzhen 518110, China
4 shared publications - Changqing Jin
Chinese Academy of Sciences
3 shared publications Jia He
Center for Electron Microscopy and Tianjin Key Lab of Advanced Functional Porous Materials, Institute for New Energy Materials and Low-Carbon Technologies, School of Materials Science and Engineering, Tianjin University of Technology, Tianjin 300384, China
3 shared publicationsJun Luo
Center for Electron Microscopy, TUT-FEI Joint Laboratory, Tianjin Key Laboratory of Advanced Porous Functional Materials, Institute for New Energy Materials and Low-Carbon Technologies, School of Materials Science and Engineering, Tianjin University of Technology 1 , Tianjin 300384, China
3 shared publications
Latest Publications
- Open Access
- 6 March 2026
- Published by Elsevier in SSRN Electronic Journal
Mn Migration–Induced Structural Evolution of Olivine LiMn0.6Fe0.4PO4 under High-Voltage Charging
Understanding cathode degradation under high-voltage operation is essential for the development of high-energy-density lithium-ion batteries. Here, we investigate the failure mechanism of olivine-type LiMn0.6Fe0.4PO₄ (LMFP) cathodes subjected to high-voltage charging. When the charging voltage exceeds a critical threshold of 4.75 V, an irreversible surface phase reconstruction is triggered. This process originates from deep delithiation–induced migration of Mn ions into lithium vacancies, resulting in cation mixing and the formation of an electrochemically inert surface phase. Such structural distortion markedly increases interfacial impedance, blocks favorable lithium-ion diffusion pathways, and accelerates manganese dissolution, ultimately leading to rapid capacity decay and poor cycling stability. Integrated electrochemical measurements, ex situ X-ray diffraction, X-ray photoelectron spectroscopy, and aberration-corrected scanning transmission electron microscopy—including differentiated differential phase contrast imaging—provide direct atomic-scale evidence of high-voltage–induced cation migration and surface reconstruction. These findings reveal a previously underappreciated degradation pathway in LMFP cathodes beyond electrolyte oxidation and offer critical mechanistic insights for designing more durable and safer high-voltage polyanion cathode materials.
- 6 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessMn Migration–Induced Structural Evolution of Olivine LiMn0.6Fe0.4PO4 under High-Voltage Charging
Understanding cathode degradation under high-voltage operation is essential for the development of high-energy-density lithium-ion batteries. Here, we investigate the failure mechanism of olivine-type LiMn0.6Fe0.4PO₄ (LMFP) cathodes subjected to high-voltage charging. When the charging voltage exceeds a critical threshold of 4.75 V, an irreversible surface phase reconstruction is triggered. This process originates from deep delithiation–induced migration of Mn ions into lithium vacancies, resulting in cation mixing and the formation of an electrochemically inert surface phase. Such structural distortion markedly increases interfacial impedance, blocks favorable lithium-ion diffusion pathways, and accelerates manganese dissolution, ultimately leading to rapid capacity decay and poor cycling stability. Integrated electrochemical measurements, ex situ X-ray diffraction, X-ray photoelectron spectroscopy, and aberration-corrected scanning transmission electron microscopy—including differentiated differential phase contrast imaging—provide direct atomic-scale evidence of high-voltage–induced cation migration and surface reconstruction. These findings reveal a previously underappreciated degradation pathway in LMFP cathodes beyond electrolyte oxidation and offer critical mechanistic insights for designing more durable and safer high-voltage polyanion cathode materials.
- Open Access
- 7 February 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-11
Self-organized hetero-nanodomains actuating super Li+ conduction in glass ceramics
Easy-to-manufacture Li2S-P2S5 glass ceramics are the key to large-scale all-solid-state lithium batteries from an industrial point of view, while their commercialization is greatly hampered by the low room temperature Li+ conductivity, especially due to the lack of solutions. Herein, we propose a nanocrystallization strategy to fabricate super Li+-conductive glass ceramics. Through regulating the nucleation energy, the crystallites within glass ceramics can self-organize into hetero-nanodomains during the solid-state reaction. Cryogenic transmission electron microscope and electron holography directly demonstrate the numerous closely spaced grain boundaries with enriched charge carriers, which actuate superior Li+-conduction as confirmed by variable-temperature solid-state nuclear magnetic resonance. Glass ceramics with a record Li+ conductivity of 13.2 mS cm−1 are prepared. The high Li+ conductivity ensures stable operation of a 220 μm thick LiNi0.6Mn0.2Co0.2O2 composite cathode (8 mAh cm−2), with which the all-solid-state lithium battery reaches a high energy density of 420 Wh kg−1 by cell mass and 834 Wh L−1 by cell volume at room temperature. These findings bring about powerful new degrees of freedom for engineering super ionic conductors.
- 7 February 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-11
Open AccessSelf-organized hetero-nanodomains actuating super Li+ conduction in glass ceramics
Easy-to-manufacture Li2S-P2S5 glass ceramics are the key to large-scale all-solid-state lithium batteries from an industrial point of view, while their commercialization is greatly hampered by the low room temperature Li+ conductivity, especially due to the lack of solutions. Herein, we propose a nanocrystallization strategy to fabricate super Li+-conductive glass ceramics. Through regulating the nucleation energy, the crystallites within glass ceramics can self-organize into hetero-nanodomains during the solid-state reaction. Cryogenic transmission electron microscope and electron holography directly demonstrate the numerous closely spaced grain boundaries with enriched charge carriers, which actuate superior Li+-conduction as confirmed by variable-temperature solid-state nuclear magnetic resonance. Glass ceramics with a record Li+ conductivity of 13.2 mS cm−1 are prepared. The high Li+ conductivity ensures stable operation of a 220 μm thick LiNi0.6Mn0.2Co0.2O2 composite cathode (8 mAh cm−2), with which the all-solid-state lithium battery reaches a high energy density of 420 Wh kg−1 by cell mass and 834 Wh L−1 by cell volume at room temperature. These findings bring about powerful new degrees of freedom for engineering super ionic conductors.
- 16 November 2021
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 13 (47) , 20119-20125
Constructing epitaxially grown heterointerface of metal nanoparticles and manganese dioxide anode for high-capacity and high-rate lithium-ion batteries
Au nanoparticles epitaxial growth on MnO 2 can not only improves the Li ion migration rate but also catalyzes the transition of MnO x to Mn 0 . The heterointerface improves the electrochemical performance of the MnO 2 –Au anode.
- 16 November 2021
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 13 (47) , 20119-20125
Constructing epitaxially grown heterointerface of metal nanoparticles and manganese dioxide anode for high-capacity and high-rate lithium-ion batteries
Au nanoparticles epitaxial growth on MnO 2 can not only improves the Li ion migration rate but also catalyzes the transition of MnO x to Mn 0 . The heterointerface improves the electrochemical performance of the MnO 2 –Au anode.
- Open Access
- 25 November 2020
- Published by MDPI AG in Nanomaterials
- Vol. 10 (12) , 2337
Ultra-Thin SnS2-Pt Nanocatalyst for Efficient Hydrogen Evolution Reaction
Transition-metal dichalcogenides (TMDs) materials have attracted much attention for hydrogen evolution reaction (HER) as a new catalyst, but they still have challenges in poor stability and high reaction over-potential. In this study, ultra-thin SnS2 nanocatalysts were synthesized by simple hydrothermal method, and low load of Pt was added to form stable SnS2-Pt-3 (the content of platinum is 0.5 wt %). The synergistic effect between ultra-thin SnS2 rich in active sites and individual dispersed Pt nanoclusters can significantly reduce the reaction barrier and further accelerate HER reaction kinetics. Hence, SnS2-Pt-3 exhibits a low overpotential of 210 mV at the current density of 10 mA cm−2. It is worth noting that SnS2-Pt-3 has a small Tafel slope (126 mV dec−1) in 0.5 M H2SO4, as well as stability. This work provides a new option for the application of TMDs materials in efficient hydrogen evolution reaction. Moreover, this method can be easily extended to other catalysts with desired two-dimensional materials.
- 25 November 2020
- Published by MDPI AG in Nanomaterials
- Vol. 10 (12) , 2337
Open AccessUltra-Thin SnS2-Pt Nanocatalyst for Efficient Hydrogen Evolution Reaction
Transition-metal dichalcogenides (TMDs) materials have attracted much attention for hydrogen evolution reaction (HER) as a new catalyst, but they still have challenges in poor stability and high reaction over-potential. In this study, ultra-thin SnS2 nanocatalysts were synthesized by simple hydrothermal method, and low load of Pt was added to form stable SnS2-Pt-3 (the content of platinum is 0.5 wt %). The synergistic effect between ultra-thin SnS2 rich in active sites and individual dispersed Pt nanoclusters can significantly reduce the reaction barrier and further accelerate HER reaction kinetics. Hence, SnS2-Pt-3 exhibits a low overpotential of 210 mV at the current density of 10 mA cm−2. It is worth noting that SnS2-Pt-3 has a small Tafel slope (126 mV dec−1) in 0.5 M H2SO4, as well as stability. This work provides a new option for the application of TMDs materials in efficient hydrogen evolution reaction. Moreover, this method can be easily extended to other catalysts with desired two-dimensional materials.
- 23 November 2020
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 12 (48) , 24463-24470
Te–S covalent bond induces 1T&2H MoS2 with improved potassium-ion storage performance
Novel Te-MoS2 materials have been synthesized, in which Te occupies the position of an Mo atom to form Te–S bonds and generated the fractional phase transformation from 2H to 1T.
- 23 November 2020
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 12 (48) , 24463-24470
Te–S covalent bond induces 1T&2H MoS2 with improved potassium-ion storage performance
Novel Te-MoS2 materials have been synthesized, in which Te occupies the position of an Mo atom to form Te–S bonds and generated the fractional phase transformation from 2H to 1T.
- Open Access
- 18 November 2020
- Published by Springer Nature in Nature Communications
- Vol. 11 (1) , 1-9
In-situ visualization of the space-charge-layer effect on interfacial lithium-ion transport in all-solid-state batteries
The space charge layer (SCL) is generally considered one of the origins of the sluggish interfacial lithium-ion transport in all-solid-state lithium-ion batteries (ASSLIBs). However, in-situ visualization of the SCL effect on the interfacial lithium-ion transport in sulfide-based ASSLIBs is still a great challenge. Here, we directly observe the electrode/electrolyte interface lithium-ion accumulation resulting from the SCL by investigating the net-charge-density distribution across the high-voltage LiCoO2/argyrodite Li6PS5Cl interface using the in-situ differential phase contrast scanning transmission electron microscopy (DPC-STEM) technique. Moreover, we further demonstrate a built-in electric field and chemical potential coupling strategy to reduce the SCL formation and boost lithium-ion transport across the electrode/electrolyte interface by the in-situ DPC-STEM technique and finite element method simulations. Our findings will strikingly advance the fundamental scientific understanding of the SCL mechanism in ASSLIBs and shed light on rational electrode/electrolyte interface design for high-rate performance ASSLIBs.
- 18 November 2020
- Published by Springer Nature in Nature Communications
- Vol. 11 (1) , 1-9
Open AccessIn-situ visualization of the space-charge-layer effect on interfacial lithium-ion transport in all-solid-state batteries
The space charge layer (SCL) is generally considered one of the origins of the sluggish interfacial lithium-ion transport in all-solid-state lithium-ion batteries (ASSLIBs). However, in-situ visualization of the SCL effect on the interfacial lithium-ion transport in sulfide-based ASSLIBs is still a great challenge. Here, we directly observe the electrode/electrolyte interface lithium-ion accumulation resulting from the SCL by investigating the net-charge-density distribution across the high-voltage LiCoO2/argyrodite Li6PS5Cl interface using the in-situ differential phase contrast scanning transmission electron microscopy (DPC-STEM) technique. Moreover, we further demonstrate a built-in electric field and chemical potential coupling strategy to reduce the SCL formation and boost lithium-ion transport across the electrode/electrolyte interface by the in-situ DPC-STEM technique and finite element method simulations. Our findings will strikingly advance the fundamental scientific understanding of the SCL mechanism in ASSLIBs and shed light on rational electrode/electrolyte interface design for high-rate performance ASSLIBs.
- 19 October 2020
- Published by AIP Publishing in Applied Physics Letters
- Vol. 117 (16) , 163103
Atomic observation of phase transition in layered SnS2 driven by in situ heating and electron beam irradiation
The phase transition in transition metal dichalcogenides has a significant effect on the electrical conductivity and thermal conductivity. Herein, the SnS2 phase transition was observed on the atomic scale by in situ scanning transmission electron microscopy. The 1T and 1H mixed phase was formed under in situ heating and electron beam irradiation. First principles calculations demonstrate that the phase transition between 1H and 1T occurs through multiple layers of phase transition rather than layer by layer. The bandgap of the mixed SnS2 phase was found to be much smaller than the reported pure 1T phase. Our results provide microscopic insights into the transformation mechanism and highlight how heating and irradiation can be used to tune the electrical transport property of layered tin chalcogenides.
- 19 October 2020
- Published by AIP Publishing in Applied Physics Letters
- Vol. 117 (16) , 163103
Atomic observation of phase transition in layered SnS2 driven by in situ heating and electron beam irradiation
The phase transition in transition metal dichalcogenides has a significant effect on the electrical conductivity and thermal conductivity. Herein, the SnS2 phase transition was observed on the atomic scale by in situ scanning transmission electron microscopy. The 1T and 1H mixed phase was formed under in situ heating and electron beam irradiation. First principles calculations demonstrate that the phase transition between 1H and 1T occurs through multiple layers of phase transition rather than layer by layer. The bandgap of the mixed SnS2 phase was found to be much smaller than the reported pure 1T phase. Our results provide microscopic insights into the transformation mechanism and highlight how heating and irradiation can be used to tune the electrical transport property of layered tin chalcogenides.
- 11 September 2020
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 12 (39) , 20425-20431
The phase-change evolution from surface to bulk of MnO anodes upon cycling
The phase transformation of MnO is revealed, in which the Mn2+ was found to initially oxidize to Mn4+ and subsequently reduce to a mixed valence of Mn2+ and Mn3+, correlating with the tendency of their discharge capacity variation upon cycling.
- 11 September 2020
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 12 (39) , 20425-20431
The phase-change evolution from surface to bulk of MnO anodes upon cycling
The phase transformation of MnO is revealed, in which the Mn2+ was found to initially oxidize to Mn4+ and subsequently reduce to a mixed valence of Mn2+ and Mn3+, correlating with the tendency of their discharge capacity variation upon cycling.
- 24 February 2020
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 56 (26) , 3753-3756
Visualization of crystal plane selectivity for irreversible phase transition in MnO@C anode
Lithium ions can completely inserted/extracted MnO (220) , while lithium ions cannot extracted in MnO (200) during charging, which is the main reason for performance degradation.
- 24 February 2020
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 56 (26) , 3753-3756
Visualization of crystal plane selectivity for irreversible phase transition in MnO@C anode
Lithium ions can completely inserted/extracted MnO (220) , while lithium ions cannot extracted in MnO (200) during charging, which is the main reason for performance degradation.
- 8 August 2019
- Published by Royal Society of Chemistry (RSC) in CrystEngComm
- Vol. 21 (36) , 5526-5532
Enhanced catalytic performance of zinc oxide nanorods with crystal plane control
Crystal plane control, one type of morphological control, can improve the performance of catalysts in catalytic reactions.
- 8 August 2019
- Published by Royal Society of Chemistry (RSC) in CrystEngComm
- Vol. 21 (36) , 5526-5532
Enhanced catalytic performance of zinc oxide nanorods with crystal plane control
Crystal plane control, one type of morphological control, can improve the performance of catalysts in catalytic reactions.