Chuanlong Lin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Chuanlong Lin has a total of 119 co-authors. Here are the top co-authors by number of shared publications:
Tingting Zhao
Center for High Pressure Science and Technology Advanced Research (HPSTAR) Beijing China
12 shared publicationsHao Wang
Center for High Pressure Science and Technology Advanced Research, Beijing, 100093, China
11 shared publicationsBohao Zhao
Center for High Pressure Science and Technology Advanced Research, Beijing, 100093, China
9 shared publicationsMei Li
Center for High Pressure Science and Technology Advanced Research, Beijing, 100093, China
8 shared publicationsSheng Jiang
Shanghai Synchrotron Radiation Facility, Shanghai Advanced Research Institute, Chinese Academy of Sciences, No. 239 Zhangheng Road, Shanghai, 201204, China
8 shared publicationsJunlong Li
Center for High Pressure Science and Technology Advanced Research (HPSTAR)
7 shared publications
Latest Publications
- 28 September 2026
- Published by Wiley in Advanced Optical Materials
- Vol. 14 (39)
Revealing Anti‐Thermal Quenching Broadband Cyan‐Green Emission in Oxonitridoaluminosilicate Phosphors Induced by Anion Ordering Substitution
For a long time, the potential of regulating anion ordering in the first coordination shell of Eu 2+ to tune its luminescence properties has remained largely unexplored. In this work, exploiting the (in)compatibility of N in nitridosilicates and O in oxosilicates, we systematically achieved N/O ordering regulation in BaSi 6 N 8 O through coupled [AlO]‐for‐[SiN] substitution. Neutron diffraction and X‐ray diffraction data revealed ordered [AlO] substitution at Si2/N1 sites together with Ba 2+ vacancies and partial O substitution at N3 sites in [Al2N 3 O] for the structure of Ba 1‐ y Al x Si 6‐ x N 8‐ x ‐2 y O 1+ x +2 y (0.72 ≤ x ≤ 1.86, 0.05 ≤ y ≤ 0.09). Combined structural analysis and DFT calculations show that ordered substitution induces lattice stress along the Al‐N bond direction, splitting Ba coordination environments into [BaN 2 (N/O) 4 ] and [BaN 6 (N/O) 2 ]. The former causes spectral broadening, whereas the latter generates a new blue emission band, together producing single‐phase broadband cyan‐green emission. The substitution negligibly affects the intrinsic structural rigidity of the host lattice. Meanwhile, Ba 2+ vacancies introduce deep defect energy levels, ultimately giving rise to anti‐thermal quenching behavior. These findings establish N/O ordering regulation as an effective strategy for designing thermally robust white‐light‐emitting oxynitride phosphors.
- 28 September 2026
- Published by Wiley in Advanced Optical Materials
- Vol. 14 (39)
Revealing Anti‐Thermal Quenching Broadband Cyan‐Green Emission in Oxonitridoaluminosilicate Phosphors Induced by Anion Ordering Substitution
For a long time, the potential of regulating anion ordering in the first coordination shell of Eu 2+ to tune its luminescence properties has remained largely unexplored. In this work, exploiting the (in)compatibility of N in nitridosilicates and O in oxosilicates, we systematically achieved N/O ordering regulation in BaSi 6 N 8 O through coupled [AlO]‐for‐[SiN] substitution. Neutron diffraction and X‐ray diffraction data revealed ordered [AlO] substitution at Si2/N1 sites together with Ba 2+ vacancies and partial O substitution at N3 sites in [Al2N 3 O] for the structure of Ba 1‐ y Al x Si 6‐ x N 8‐ x ‐2 y O 1+ x +2 y (0.72 ≤ x ≤ 1.86, 0.05 ≤ y ≤ 0.09). Combined structural analysis and DFT calculations show that ordered substitution induces lattice stress along the Al‐N bond direction, splitting Ba coordination environments into [BaN 2 (N/O) 4 ] and [BaN 6 (N/O) 2 ]. The former causes spectral broadening, whereas the latter generates a new blue emission band, together producing single‐phase broadband cyan‐green emission. The substitution negligibly affects the intrinsic structural rigidity of the host lattice. Meanwhile, Ba 2+ vacancies introduce deep defect energy levels, ultimately giving rise to anti‐thermal quenching behavior. These findings establish N/O ordering regulation as an effective strategy for designing thermally robust white‐light‐emitting oxynitride phosphors.
- 2 June 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (23) , 13144-13152
Lithium-Rich Antifluorite Li 5 Fe x Al 1– x O 4 : Phase-Controllable Syntheses, Local Structural Evolution, and Electrochemical Performance
Lithium-rich antifluorite oxides formed by metal ion substitution in Li2O are highly promising cathode prelithiation materials. Understanding the connection between their structure and performance is crucial for this type of material. In this paper, by forming solid solutions of α/β-Li5AlO4 and Li5FeO4, a group of continuous solid solutions, α-Li5FexAl1-xO4, and another group of phase transition solid solutions, β-Li5FexAl1-xO4, which underwent a phase transition at x = 0.5 were obtained, respectively. Changes in the local and electronic structures of the FeO4 polyhedra were observed in the α-phase solid solution, and the decrease in electrochemical activity led to a linear attenuation of battery capacity. The structural changes after the phase transition of the β-phase solid solution led to the enhancement of the Li-Fe interaction, resulting in the disappearance of the delithiation performance within the working voltage. This study established a direct connection among local coordination structure, electronic structure, and electrochemical activity in lithium-rich antifluorite with abundant lithium content, providing a key theoretical basis for the rational design of high-performance prelithiation agents.
- 2 June 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (23) , 13144-13152
Lithium-Rich Antifluorite Li 5 Fe x Al 1– x O 4 : Phase-Controllable Syntheses, Local Structural Evolution, and Electrochemical Performance
Lithium-rich antifluorite oxides formed by metal ion substitution in Li2O are highly promising cathode prelithiation materials. Understanding the connection between their structure and performance is crucial for this type of material. In this paper, by forming solid solutions of α/β-Li5AlO4 and Li5FeO4, a group of continuous solid solutions, α-Li5FexAl1-xO4, and another group of phase transition solid solutions, β-Li5FexAl1-xO4, which underwent a phase transition at x = 0.5 were obtained, respectively. Changes in the local and electronic structures of the FeO4 polyhedra were observed in the α-phase solid solution, and the decrease in electrochemical activity led to a linear attenuation of battery capacity. The structural changes after the phase transition of the β-phase solid solution led to the enhancement of the Li-Fe interaction, resulting in the disappearance of the delithiation performance within the working voltage. This study established a direct connection among local coordination structure, electronic structure, and electrochemical activity in lithium-rich antifluorite with abundant lithium content, providing a key theoretical basis for the rational design of high-performance prelithiation agents.
- 16 April 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 14 (24) , 10510-10519
Pressure-engineered trap-controlled multimodal luminescence for versatile emission responses in Pr-doped NaNbO 3
NaNbO 3 :Pr 3+ exhibits multimodal luminescence (photoluminescence, persistent luminescence, and mechanoluminescence) via pressure-tuned shallow and deep traps under varying applied pressures.
- 16 April 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 14 (24) , 10510-10519
Pressure-engineered trap-controlled multimodal luminescence for versatile emission responses in Pr-doped NaNbO 3
NaNbO 3 :Pr 3+ exhibits multimodal luminescence (photoluminescence, persistent luminescence, and mechanoluminescence) via pressure-tuned shallow and deep traps under varying applied pressures.
- 9 March 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (10)
Diverse nanostructures of bc8 silicon mediated by controllable transition kinetics of beta-Sn silicon
Metastable polymorphs of silicon exhibit direct and narrow band gaps, offering broad application potential. The transition kinetics in the formation of metastable Si have been extensively studied, but the relationship between transition conditions and nanostructures of product phases remains unclear. Here, we report diverse nanostructures of body-centered cubic (bc8) Si formed by rapid decompression of beta-Sn Si at different rates. High-resolution transmission electron microscopy images show slow decompression results in the formation of bc8 nanocrystals with long-range order and abundant interfacial defects, including dislocation, twin, stacking fault, and internal lattice strain. In contrast, rapid decompression generates bc8 nanoclusters with a macroscopic amorphous characteristic, as evidenced by the broad diffuse halo in fast Fourier transform pattern. Statistical analysis of the size distribution shows that the grain size decreases with the increasing decompression rate, indicating a clear rate-dependent behavior. These findings provide structural evidence and mechanistic insights into the kinetically controlled formation of the metastable nanostructures for promising applications.
- 9 March 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (10)
Diverse nanostructures of bc8 silicon mediated by controllable transition kinetics of beta-Sn silicon
Metastable polymorphs of silicon exhibit direct and narrow band gaps, offering broad application potential. The transition kinetics in the formation of metastable Si have been extensively studied, but the relationship between transition conditions and nanostructures of product phases remains unclear. Here, we report diverse nanostructures of body-centered cubic (bc8) Si formed by rapid decompression of beta-Sn Si at different rates. High-resolution transmission electron microscopy images show slow decompression results in the formation of bc8 nanocrystals with long-range order and abundant interfacial defects, including dislocation, twin, stacking fault, and internal lattice strain. In contrast, rapid decompression generates bc8 nanoclusters with a macroscopic amorphous characteristic, as evidenced by the broad diffuse halo in fast Fourier transform pattern. Statistical analysis of the size distribution shows that the grain size decreases with the increasing decompression rate, indicating a clear rate-dependent behavior. These findings provide structural evidence and mechanistic insights into the kinetically controlled formation of the metastable nanostructures for promising applications.
- 1 January 2026
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 75 (3)
Regulation of high pressure on mechanoluminescence: Summary and Prospects
力致发光( Mechanoluminescence,简记为ML)是一种在机械刺激下可直接发光的现象。因其具备高空间选择性、快速响应及多模式发光协同等特性,在结构健康监测、智能传感与光学防伪等领域展现出巨大的应用潜力。然而,该领域仍面临机理尚不明确、性能优异的可应用材料数量有限,以及测试标准尚未建立等挑战。近年来,高压科学技术(尤其是动态加载技术)的持续突破与创新,为ML研究提供了新的探索途径。在GPa级高压条件下,通过调控ML材料的原子间距、电子轨道和晶体结构,不仅实现了对其发光强度与颜色的高效调控,还成功捕获到从微秒到秒量级的发光动力学演化过程,为揭示ML微观机制提供了关键实验数据支撑。本文概述了高压技术在ML材料性能优化与机理研究方面的应用进展,总结了其在提高发射强度、调控发光光谱、揭示动态过程等方面的成果,并对未来高压力致发光研究的发展方向与挑战进行展望。
- 1 January 2026
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 75 (3)
Regulation of high pressure on mechanoluminescence: Summary and Prospects
力致发光( Mechanoluminescence,简记为ML)是一种在机械刺激下可直接发光的现象。因其具备高空间选择性、快速响应及多模式发光协同等特性,在结构健康监测、智能传感与光学防伪等领域展现出巨大的应用潜力。然而,该领域仍面临机理尚不明确、性能优异的可应用材料数量有限,以及测试标准尚未建立等挑战。近年来,高压科学技术(尤其是动态加载技术)的持续突破与创新,为ML研究提供了新的探索途径。在GPa级高压条件下,通过调控ML材料的原子间距、电子轨道和晶体结构,不仅实现了对其发光强度与颜色的高效调控,还成功捕获到从微秒到秒量级的发光动力学演化过程,为揭示ML微观机制提供了关键实验数据支撑。本文概述了高压技术在ML材料性能优化与机理研究方面的应用进展,总结了其在提高发射强度、调控发光光谱、揭示动态过程等方面的成果,并对未来高压力致发光研究的发展方向与挑战进行展望。
- 5 November 2025
- Published by American Physical Society (APS) in Physical Review B
- Vol. 112 (17)
Chain disorder induced by the bonding polarity in the incommensurate structure of antimony
- 5 November 2025
- Published by American Physical Society (APS) in Physical Review B
- Vol. 112 (17)
Chain disorder induced by the bonding polarity in the incommensurate structure of antimony
- 26 September 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (40) , 36486-36493
Anomalous Metallic Cubic CsCuBr3 Perovskites: Pressure- and Temperature-Driven Suppression of Jahn–Teller Distortion
Distinct from traditional halide perovskites, which are based on main-group elements (e.g., Pb2+, Sn2+, Ge2+) and are typically semiconducting, transition metals like Cu2+─characterized by partially filled d-orbitals─offer unique advantages in modulating the electronic behavior of perovskite materials. However, the strong Jahn-Teller effect of Cu2+ makes it a significant challenge for stabilizing a robust three-dimensional perovskite framework. Herein, we report the first synthesis of a metallic cubic perovskite phase of CsCuBr3 via a tailored structural design under high-temperature and high-pressure conditions. In situ synchrotron X-ray diffraction reveals that the orthorhombic nonperovskite CsCuBr3 precursor (space group C2221) transforms into a cubic perovskite structure (space group Pm-3m) featuring an undistorted corner-sharing octahedral framework at ∼22 GPa and ∼603 K. The perovskite structure remains stable at pressure down to 4.3 GPa at room temperature, while at low temperatures below 50 K, it may be recovered to ambient pressure. Notably, the structure lacks both the expected luminescence and a distinct absorption edge, instead exhibiting a metallic behavior, as confirmed by temperature-dependent resistance measurements. Electronic structure calculations at 22.4 GPa and 0 K further reveal pronounced hybridization between the Cu-3d and Br-4p orbitals near the Fermi level, leading to an enhanced orbital degeneracy and electron delocalization. These findings demonstrate that the lattice contraction effectively suppresses the strong Jahn-Teller distortion intrinsic to Cu2+, offering a promising strategy for the design of high-performance novel materials.
- 26 September 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (40) , 36486-36493
Anomalous Metallic Cubic CsCuBr3 Perovskites: Pressure- and Temperature-Driven Suppression of Jahn–Teller Distortion
Distinct from traditional halide perovskites, which are based on main-group elements (e.g., Pb2+, Sn2+, Ge2+) and are typically semiconducting, transition metals like Cu2+─characterized by partially filled d-orbitals─offer unique advantages in modulating the electronic behavior of perovskite materials. However, the strong Jahn-Teller effect of Cu2+ makes it a significant challenge for stabilizing a robust three-dimensional perovskite framework. Herein, we report the first synthesis of a metallic cubic perovskite phase of CsCuBr3 via a tailored structural design under high-temperature and high-pressure conditions. In situ synchrotron X-ray diffraction reveals that the orthorhombic nonperovskite CsCuBr3 precursor (space group C2221) transforms into a cubic perovskite structure (space group Pm-3m) featuring an undistorted corner-sharing octahedral framework at ∼22 GPa and ∼603 K. The perovskite structure remains stable at pressure down to 4.3 GPa at room temperature, while at low temperatures below 50 K, it may be recovered to ambient pressure. Notably, the structure lacks both the expected luminescence and a distinct absorption edge, instead exhibiting a metallic behavior, as confirmed by temperature-dependent resistance measurements. Electronic structure calculations at 22.4 GPa and 0 K further reveal pronounced hybridization between the Cu-3d and Br-4p orbitals near the Fermi level, leading to an enhanced orbital degeneracy and electron delocalization. These findings demonstrate that the lattice contraction effectively suppresses the strong Jahn-Teller distortion intrinsic to Cu2+, offering a promising strategy for the design of high-performance novel materials.
- Open Access
- 12 September 2025
- Published by Wiley in Advanced Science
- Vol. 12 (45) , e11805
Enhancing Mn‐Activated Mechanoluminescence via Pressure‐Regulated Local Structure in Centrosymmetric BaZnOS for Dynamic Response Applications
Self‐recoverable mechanoluminescence (ML), typically observed in non‐centrosymmetric luminescent materials, has recently been reported in centrosymmetric systems such as Mn‐activated BaZnOS. However, the underlying mechanism and structure‐luminescence relationship remain unclear, hindering the development of high‐performance optoelectronics. Here, it is demonstrated that Mn 2+ ‐activated BaZnOS exhibits strong, reproducible, and self‐recoverable piezoelectrically activated ML emission at the GPa level. Under compression at 0.6 GPa s −1 , the ML intensity exhibits 10‐fold enhancement from ambient pressure to 1.5 GPa, but weakens above 1.5 GPa. Interestingly, it shows an oscillatory ML emission with time scale of 110 ms at rates of 2.3–2.7 GPa s −1 . The ML behavior is distinct from photoluminescence (PL) with time scale of 0.3–1.5 ms, which shows slight attenuation at 0–4 GPa, exhibits threefold boost at 4–12 GPa, and then weakens above 12 GPa. The analyzed results show that the distinctive ML and PL behaviors stem from pressure‐regulated local structure, significantly affecting the local piezoelectricity and defect traps. Additionally, Mn 2+ ‐activated BaZnOS exhibits diverse dynamic responses in both temporal and spatial dimensions for potential optoelectronic applications.
- 12 September 2025
- Published by Wiley in Advanced Science
- Vol. 12 (45) , e11805
Open AccessEnhancing Mn‐Activated Mechanoluminescence via Pressure‐Regulated Local Structure in Centrosymmetric BaZnOS for Dynamic Response Applications
Self‐recoverable mechanoluminescence (ML), typically observed in non‐centrosymmetric luminescent materials, has recently been reported in centrosymmetric systems such as Mn‐activated BaZnOS. However, the underlying mechanism and structure‐luminescence relationship remain unclear, hindering the development of high‐performance optoelectronics. Here, it is demonstrated that Mn 2+ ‐activated BaZnOS exhibits strong, reproducible, and self‐recoverable piezoelectrically activated ML emission at the GPa level. Under compression at 0.6 GPa s −1 , the ML intensity exhibits 10‐fold enhancement from ambient pressure to 1.5 GPa, but weakens above 1.5 GPa. Interestingly, it shows an oscillatory ML emission with time scale of 110 ms at rates of 2.3–2.7 GPa s −1 . The ML behavior is distinct from photoluminescence (PL) with time scale of 0.3–1.5 ms, which shows slight attenuation at 0–4 GPa, exhibits threefold boost at 4–12 GPa, and then weakens above 12 GPa. The analyzed results show that the distinctive ML and PL behaviors stem from pressure‐regulated local structure, significantly affecting the local piezoelectricity and defect traps. Additionally, Mn 2+ ‐activated BaZnOS exhibits diverse dynamic responses in both temporal and spatial dimensions for potential optoelectronic applications.
- Open Access
- 17 April 2025
- Published by AIP Publishing in Matter and Radiation at Extremes
- Vol. 10 (3)
Formation of distinctive nanostructured metastable polymorphs mediated by kinetic transition pathways in germanium
High-pressure β-Sn germanium may transform into diverse metastable allotropes with distinctive nanostructures and unique physical properties via multiple pathways under decompression. However, the mechanism and transition kinetics remain poorly understood. Here, we investigate the formation of metastable phases and nanostructures in germanium via controllable transition pathways of β-Sn Ge under rapid decompression at different rates. High-resolution transmission electron microscopy reveals three distinct metastable phases with the distinctive nanostructures: an almost perfect st12 Ge crystal, nanosized bc8/r8 structures with amorphous boundaries, and amorphous Ge with nanosized clusters (0.8–2.5 nm). Fast in situ x-ray diffraction and x-ray absorption measurements indicate that these nanostructured products form in certain pressure regions via distinct kinetic pathways and are strongly correlated with nucleation rates and electronic transitions mediated by compression rate, temperature, and stress. This work provides deep insight into the controllable synthesis of metastable materials with unique crystal symmetries and nanostructures for potential applications.
- 17 April 2025
- Published by AIP Publishing in Matter and Radiation at Extremes
- Vol. 10 (3)
Open AccessFormation of distinctive nanostructured metastable polymorphs mediated by kinetic transition pathways in germanium
High-pressure β-Sn germanium may transform into diverse metastable allotropes with distinctive nanostructures and unique physical properties via multiple pathways under decompression. However, the mechanism and transition kinetics remain poorly understood. Here, we investigate the formation of metastable phases and nanostructures in germanium via controllable transition pathways of β-Sn Ge under rapid decompression at different rates. High-resolution transmission electron microscopy reveals three distinct metastable phases with the distinctive nanostructures: an almost perfect st12 Ge crystal, nanosized bc8/r8 structures with amorphous boundaries, and amorphous Ge with nanosized clusters (0.8–2.5 nm). Fast in situ x-ray diffraction and x-ray absorption measurements indicate that these nanostructured products form in certain pressure regions via distinct kinetic pathways and are strongly correlated with nucleation rates and electronic transitions mediated by compression rate, temperature, and stress. This work provides deep insight into the controllable synthesis of metastable materials with unique crystal symmetries and nanostructures for potential applications.
- 26 February 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (9) , 4715-4723
Rate-Dependent Mechanoluminescence in SrZn2S2O:Mn2+ for Time-Characterized Optoelectronic Devices
- 26 February 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (9) , 4715-4723
Rate-Dependent Mechanoluminescence in SrZn2S2O:Mn2+ for Time-Characterized Optoelectronic Devices