DJDan Jia

Dan Jia

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Dan Jia has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    An Integrated Scattering Cancellation and Modification Approach for Broadband RCS Reduction of Array Antenna

    by Yakun Liu, Biao Du, Dan Jia, Xuchen Han

    This paper presents a design method of integrating scattering cancellation with array-level modification techniques for broadband RCS reduction (RCSR) of an array antenna. Taking a circular patch element as an example to explain how the RCSR method is used, an L-shaped feeding structure is adopted, with a dielectric substrate of Arlon Diclad 880 (tm). First, two elements with equal scattering amplitude but opposite-phase characteristics are proposed by adjusting the radiation patch dimensions and loading slots on the small patch based on characteristic mode analysis (CMA). Through arrangement of these two elements in a 2 × 2 array configuration, effective RCSR is demonstrated across 3.5–9.5 GHz. To further broaden the RCSR bandwidth, the 2 × 2 array is modified again on the ground plane using CMA. Through the integration of scattering cancellation and array-level modification techniques, a broadband RCSR design of the array antenna is realized across 2.5–11 GHz. To demonstrate the universality of the design method, 2 × 2 and 4 × 4 array antennas are designed, fabricated, and tested. The 2 × 2 array antenna can realize an average RCSR of 10.3 dB and a peak RCSR of 22 dB across 2.5–11 GHz. The 4 × 4 array antenna can realize an average RCSR of 8 dB and a peak RCSR of 23 dB across 2.5–10.5 GHz. Meanwhile, the transmission and radiation performance remains basically unchanged. The 2 × 2 array antenna works from 3.76 GHz to 5.45 GHz (36.7%) and the 4 × 4 array antenna works from 3.80 GHz to 5.30 GHz (31.1%). Their gains are 9.9 dBi for the 2 × 2 array antenna and 15.9 dBi for the 4 × 4 array antenna at 4.5 GHz. Measured results show a good agreement with calculated ones, which verifies the effectiveness and correctness of the design method.

  • Open Access

    Design of Broad-Angle Low-RCS Microstrip Antenna for Dual-Polarization Using Characteristic Mode Analysis

    by Yakun Liu, Biao Du, Dan Jia

    In this paper, a broad-angle low-scattering microstrip antenna for dual-polarization is designed based on characteristic mode analysis (CMA). The modal analysis of the reference antenna under dual-polarization incident plane waves is first carried out to guide radar cross section (RCS) reduction (RCSR) design in broad-angle range. Then, through the modifications on the radiation patch and ground, the modal currents of the important scattering modes in broad-angle range are cut off. Hence, a broad-angle low-RCS aperture-coupled microstrip antenna for dual-polarization is obtained. However, the radiation performance decreases due to the ground modification. A frequency selective surface (FSS) structure is designed and fills in the ground modification areas. With the FSS structure, the proposed antenna shows a good radiation and scattering performance. A low-RCS antenna prototype is fabricated and tested. The antenna works from 2.79 GHz to 2.87 GHz (2.82%), and the gain is 6 dBi at 2.84 GHz. For the co-polarization, it can realize RCSR from 0° to 90°, and the average and peak RCSRs are 9.0 dB and 17 dB, respectively. For the cross-polarization, it can realize RCSR from 0° to 18° and 22° to 90°, and the average and peak RCSRs are 5.0 dB and 20 dB, respectively. In the meantime, its transmission and radiation performance keeps well. The measured and simulated results are in good agreement, which validates the design.


  • Open Access

    Design of Broadband Low-RCS Array Antennas Based on Characteristic Mode Cancellation

    by Jialiang Han, Dan Jia, Biao Du, Guodong Han, Yongtao Jia, Zekang Zhao

    In this letter, a design method for low radar cross section (RCS) array antennas based on characteristic mode cancellation (CMC) is presented. Based on the characteristic mode theory (CMT), two novel microstrip elements are designed by introducing rectangular slots and cross slots, which produce 180° scattering phase difference by adjusting the size of slots. The dominant characteristic modes of the two elements achieve broadband dual-linear polarization CMC and similar radiation performances. The 4 × 4 array antenna consisting of these two antenna elements is designed. The operating band is from 4.55 GHz to 5.49 GHz (relative bandwidth 18.7%). The gain loss of the proposed array is about 0.1 dB compared to the reference array. The monostatic RCS is reduced for dual−linear polarized waves, and the 6 dB radar cross section reduction (RCSR) bandwidths are 62.3% and 35.7%, respectively. The prototype is fabricated and measured. The measured results of radiation pattern and RCS are in good agreement with the simulated results.


  • Theoretic Study of Antenna Scattering Problems Based on Characteristic Modes and its Applications in Reducing Antenna Scattering

    by Gang Shi, Yongtao Jia, Ying Liu, Yi Chen Zhong, Yang Wu, Biao Du, Dan Jia, Tie Jun Cui

    A new antenna scattering theory based on characteristic modes (AST-CM) is proposed to analyze the antenna scattering mechanism and guide the design of antenna scattering reduction in this paper. A specific set of modal electric fields, which of an antenna loaded with a short circuit, is used to express the structure mode and antenna mode scattering fields of the antenna with arbitrary loads. The contribution of each characteristic mode to the structure mode and antenna mode scattering fields can be clearly analyzed, which efficiently guides the antenna scattering reduction under the incident plane waves with arbitrary propagation direction and polarization. A typical microstrip antenna is given as an example to validate the proposed AST-CM. The radar cross section (RCS) of the microstrip antenna calculated by AST-CM agrees well with the result simulated by commercial simulation software Altair FEKO. Moreover, the design procedure based on AST-CM is used to guide the in-band RCS reduction of the microstrip antenna under both x - and y -polarized normally incident plane waves. Compared with the reference antenna, the proposed antenna achieves a notable RCS reduction in its operation band with the radiation performance well preserved. The proposed low-RCS antenna is fabricated and measured, and the experimental results are in good agreement with the numerical simulated results.


  • Beam-Steering Flat Lens Antenna Based on Multilayer Gradient Index Metamaterials

    by Dan Jia, Ying Ran He, Ning Ding, Jian Zhai Zhou, Biao Du, Wen Jing Zhang

    A low profile lens antenna based on multilayer gradient index metamaterials (GIMs) is designed and fabricated. The beam steering is achieved by mechanically changing the location of the feed horn. Non-resonant structure is used to construct the GIMs, so the metamaterial can work in broadband with negligible intrinsic loss. Standard printed circuit board techniques are used to fabricate the prototype. The diameter of the prototype is 98 mm and the thickness is 17 mm. The antenna is designed to work in Ku-band, with aperture efficiencies up to 74% and 65% at 12.5 GHz and 14.25 GHz, respectively. The antenna gain drops about 2.5dB when the beam scans to 40°. The side lobe level (SLL) is lower than -10dB within the scanning range. The prototype confirms the feasibility of using metamaterials technology for achieving high-efficiency and broadband beam steering antenna, which holds great promise for applications in on-the-move satellite communication.