MTMasayuki Takatera

Masayuki Takatera

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Masayuki Takatera has a total of 84 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Effect of Avatar and Actual Human Body Shape Differences on Comfort Evaluation in Different Postures using 3D Garment Simulation

    by Risako Ushio, KyoungOk KIM, Masayuki Takatera

    Recent advancements in three-dimensional (3D) garment simulation have improved virtual fitting accuracy, yet discrepancies between avatars and actual human bodies remain a challenge in comfort evaluation for different postures. This study examines the effect of avatar-human shape differences on perceived comfort and clothing pressure in 3D garment simulations. A 3D-scanned posable avatar was generated using body data for 10 adult females. Shape differences in standing (A-pose) and forward-reaching (F-pose) postures were analyzed through contour comparisons. Physical trials and simulations were conducted using a basic upper garment with sleeves. Clothing pressure was measured using air packs in actual fittings and pressure maps in simulations. Results showed that simulation effectively replicated comfort evaluation for the A-pose whereas there were differences due to the deformation of joints for the F-pose. Differences in perceived comfort were largely determined by fabric deformation due to avatar shape differences. These findings emphasize the need to improve avatar accuracy in joint regions to improve dynamic comfort assessment in 3D simulations.

  • Open Access

    Effects of Silhouette and Design Details on the Perceived Sense of High Quality for Pajamas

    by KyoungOk KIM, Taisei Sasaki, Masayuki Takatera, Yurika Hashimoto, Masatoshi Kawakami

    We investigated the effects of the silhouette and design details on the perceived sense of high quality for pajamas. Pajama images with various dimensions and details were created through apparel simulation and evaluated for their sense of high quality using the semantic differential method on a seven-point scale. It was found that adding piping to pajamas led to a sense of high quality and the placement of a pocket affected the sense of high quality. In addition, samples with patterns having smaller body width, shoulder width, sleeve width, pant length, and hip circumference than the standard pattern with little wrinkling tended to be perceived as being of higher quality. The identified characteristics of high-quality pajama silhouettes and details provide valuable insights for manufacturers.


  • Open Access

    Estimation of Garment Impression using Regression Models with Design Parameters and Image Features

    by Ryo Harada, KyoungOk KIM, Masayuki Takatera

    To estimate the garment impression, we verified three regression models using design parameters, geometrical and texture features of images, and convolutional features of images. Adopting three-dimensional apparel simulation, we generated 375 images of a men's outdoor jacket by changing design parameters, namely the length, waist, hem circumference, and sleeve circumference. Nine participants evaluated the cool-uncool (kakkoī-kakkowarui in Japanese) impression of the garment images using a semantic differential method. We used the measured widths, angles, and G-type Fourier descriptors of the jacket images as geometrical features. For texture features, the fractal dimension and Haralick texture features (Asm, Entropy, Contrast, Correlation) of the images were used. Convolutional features were obtained from the images using a convolutional neural network. By using the design parameters and the obtained features, we estimated the image impression using three regression models: multiple linear regression, neural network, and light gradient boosting machine (LightGBM) models. As a result, the LightGBM with the design parameters had the highest mean correlation coefficient for all participants. The inclusion of design parameters was thus found to be effective in estimating the impression based on garment design parameters with LightGBM.


  • Making individualized men's basic body block patterns with a measuring garment incorporating stretchable capacitance sensors

    by KyoungOk Kim, Daisuke Iguchi, Masayuki Takatera

    Purpose: To make individualized men's basic upper garment patterns without sleeves, the authors developed a measuring garment that measures necessary body dimensions and angles all together. Additionally, the authors proposed a method for making individualized basic body block patterns using the obtained dimensions and angles.Design/methodology/approach: The authors decided on the locations of the dimensions of the body required for making the individualized garments. The authors then sewed multiple stretchable capacitance sensors to corresponding locations on a stretchable T-shirt. To obtain the dimensions with sensors of short length, the authors indirectly obtained each length from the relationship between the actual body length and the capacitance of the sensor. Beforehand, the authors obtained linear-approximation equations for the relationship between actual body dimensions and the capacitance of sensors for five participants and a dummy. The authors then used the measuring garment and the equations to obtain the body dimensions of another six participants. The authors compared the obtained and actual body dimensions to verify the equations. The authors made individualized upper-garment patterns without sleeves and garments for the 11 participants with the obtained dimensions and angles. The authors verified the proposed method in wearing tests comparing garments designed using the proposed method with conventionally designed garments.Findings: Using the measuring garment, the authors obtained body dimensions close to actual body dimensions. A pattern of the individualized basic upper garment using the obtained dimensions and angles could be drawn. Compared with the conventional patterns, the individualized patterns had notable differences in the locations of the shoulder point and side neck point and directions of the shoulder line, which relate to the shoulder shape (i.e. square, sloping, forward, or backward). In wearing tests, all participants declared that the individualized garment better fitted their shoulders than the conventional garment without tightness around the shoulders, neck, and armpits. The proposed method with the developed measuring garment was thus found to be effective in designing individualized garments.Originality/value: This paper presents the possibility of not only measuring body dimensions but also designing individualized basic upper garments using the proposed measuring garment. The proposed measuring garment will assist the efficient manufacture of individualized upper garments without a three-dimensional scanner or special skills.


  • Open Access

    Garment impression estimation with design parameters

    by Ryo Harada, KyoungOk KIM, Masayuki Takatera

    To estimate garment impressions, we verified three regression models using design parameters. Using three-dimensional apparel simulation, we generated 375 images of a men's outdoor jacket by changing design parameters: length, waist, hem circumference, and sleeve circumference. Nine people evaluated cool-uncool (kakkoī-kakkowarui in Japanese) impressions of the garment images using a semantic differential method. With the design parameters, we obtained the estimated image impression using three regression models: multiple linear regression (MLR), neural network (NN), and light gradient boosting machine (LightGBM). We used correlation coefficient(𝑐𝑜𝑟𝑟) and adjusted coefficient of determination between evaluated and estimated impression values to evaluate estimation performance. As a result, the LightGBM with the design parameters showed the highest mean 𝑐𝑜𝑟𝑟 for all participants. It was thus found that the design parameters are effective in estimating the garment impression with LightGBM.


  • Developing a basic pattern for a design based on the comparison of four basic pattern approaches

    by Ayumi Isaji, KyoungOk Kim, Masayuki Takatera

    Purpose: The authors investigate the effects of four basic bodice pattern shapes and developing methods on the appearances of ladies' fitted bodice design. The authors also clarify the preferred appearance among the four ladies' fitted bodice design as reported by Japanese university students and propose a pattern developing method of the preferred bodice design using the four basic bodices.Design/methodology/approach: Targeting a ladies' fitted bodice design with designated dimensions, four ladies' fitted bodices were manufactured using four types of basic bodice pattern and their development methods: BUNKA from Japan, ESMOD from France, ARMSTRONG from the United States, and ALDRICH from the United Kingdom. The appearances of the four fitted bodices were observed and explained in terms of ease and darts. The authors also conducted a sensory test regarding the preferred shirt appearance adopting a semantical difference method, for 15 female Japanese university students in their twenties. The authors propose a pattern developing method to design the preferred fitted bodice shape using different basic bodices considering the amount and allocation of ease and size and allocation of darts to front and back of the bodice.Findings: The appearances of the bodices were different even for the same fitted bodice design depending on the type of basic bodice pattern and its developing method. BUNKA had a slightly constricted silhouette at the waist and ESMOD had a straight silhouette and less constriction. ARMSTRONG had the most constricted silhouette and rounded hips and ALDRICH had a slightly constricted curve from the bust to the hips. The shape differences were strongly related to the amount of ease and the difference in waist darts between front and back of the bodice. The Japanese participants preferred fitted bodices that have a constricted silhouette from front and back views. From the side view, a straight line at the front and a constricted shape and emphasized hip at the back silhouette were preferred. By adjusting the allocations of ease and waist darts to front and back of the bodice, it was possible to design the preferred fitted bodice shape even with different basic pattern.Originality/value: It was found that the basic bodice pattern and developing method affect the final clothing. It is necessary to adjust the allocation of ease and darts to front and back of the bodice to construct clothing using different patternmaking methods. It was shown that it is more important to consider the patternmaking method than to select a suitable basic bodice pattern. It is necessary to understand the characteristics of allocation and amount of ease and the allocation and size of waist darts in both the basic patternmaking method and developing method. This approach is also useful in making an article of clothing with a shape required in other countries.


  • Relationship between Ease and Thermal Insulation of Men's Pyjamas Made of a Knitted Fabric with New Cotton Non-Twisted Hollow Yarn

    by Toko Manabe, Kyoung Ok Kim, Masayuki Takatera, Kyosuke Kanda, Masatoshi Kawakami, Nagisa Hirata

    Journal of Fiber Bioengineering and Informatics (JFBI) is a peer-reviewed international journal to promote multidisciplinary research and collaborations across different fields in fiber science, engineering and technology. This quarterly published journal is fully committed to help authors to generate high impact research outputs in terms of academic citations, industrial applications and contributions to the society. It aims to create an international forum for exchanging novel ideas of research.


  • Open Access

    Effect of fabric softener on crossing torque and compression properties of cotton yarn

    by KyoungOk Kim, Kaori Shimizu, Takako Igarashi, Koichi Nakamura, Masayuki Takatera

    The effect of a fabric softener treatment on the properties of the crossing torque–intersecting angle behavior of yarns and the transverse compression properties of single and crossing yarns, which are related to the shear properties of a fabric, is investigated. The crossing torque required to change the intersecting angle between two yarns, the hysteresis in the crossing torque–intersecting angle curve (i.e., crossing torque hysteresis), and the compression properties of cotton yarns after water treatment with and without softener were measured. To measure those properties, the drying condition was varied after the treatment to comprise crossed yarns with an applied load and parallel yarns in a bundled state. The average crossing torque value of the sample with a softener treatment was less than that with a water treatment for yarns from a bundle. For yarns dried while crossed, the average crossing torque value of the sample with a softener treatment was somewhat less than that with a water treatment. For both drying conditions, the average crossing torque hysteresis value decreased after a softener treatment. The compressional resilience value of the sample with a softener treatment was greater (bouncier) than that with a water treatment for yarns dried while crossed. The results suggest that the softener treatment reduces the crossing torque and increases the compressional resilience of yarns. This is due to the reduction of hydrogen bonding between surface fibers via the softener. The softener treatment also decreased the crossing torque hysteresis, corresponding to decreased friction between fibers.


  • Measurement of local shear deformation in fabric drape using three-dimensional scanning

    by Liu Yang, KyoungOk Kim, Masayuki Takatera

    We propose a measuring method of shear deformation in drape using three-dimensional (3D) scanning. We measured the local shear angles in fabric drape based on the Fabric Research Laboratories (FRL) drape test for woven fabrics using the proposed method. We investigate the effects of the relative positions of the node to the center grainlines that cross at the fabric center, and the bending and shear properties of fabric on the shear angles. To measure the local shear deformation, we obtained 3D drape shapes of four different fabrics with three to six nodes. We covered the obtained drape shapes using a fabric model composed of square cells that allowed shear deformation. By calculating the shear angles of the cells, we obtained the local shear deformation. We found that the FRL drape can be characterized by three areas, except for the flat areas of the support disks: (a) areas along the center grainlines with zero or small shear angles within 3°, which could result from single curvature bending; (b) areas in the bias directions with relatively large shear angles over 3°, which could result from double curvature bending; and (c) polygon edges connected by tangents of the support disk with relatively larger shear angles than their surroundings, which could result from both bending and shear deformation, such as folding and wrinkles. By investigating the relationships between areas with large shear angles and the bending rigidity/shear stiffness, we clarified that the bending rigidity indirectly affects the local shear deformation of drape.


  • Similarities and differences between virtual and actual pants

    by Siti Zulaikha Binti Zulkifli, KyoungOk Kim, Masayuki Takatera

    Purpose: This study aimed to clarify the criteria for subjective evaluation of the similarities and differences between virtual and actual pants and propose a quantitative evaluation method for those similarities and differences based on geometric features related to the evaluation.Design/methodology/approach: Using patterns, we made five pairs of actual pants for a dummy in five fabrics. We simulated virtual pants with a 3-D simulator. Sensory evaluation was conducted with images of the virtual and actual pants: 20 participants compared the images based on a questionnaire. For the structure of evaluation, the authors undertook analysis of variance and principal component analysis. The actual and virtual pants were geometrically compared using the 3-D scanned data. To investigate the relationship between quantitative and sensory evaluation, the authors calculated the correlation coefficients.Findings: The authors found that subjects perceived the differences between actual and simulated pants. When comparing the virtual and actual pants, the criteria for the differences were the silhouette from the front view, hem width, waist and wrinkles. Using differences in the hem width, it would be possible to evaluate the differences between actual and simulated pants. Roughness and smoothness of the silhouette also affected evaluation.Originality/value: The authors clarified the evaluation criteria for the similarities and differences between virtual and actual pants. The authors proposed a quantitative evaluation method for the similarities and differences between virtual and actual garment based on our criteria. This study will be of benefit to 3-D simulator users and developers.