Benjamin P. Dix-Matthews
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Benjamin P. Dix-Matthews has a total of 55 co-authors. Here are the top co-authors by number of shared publications:
- David R. Gozzard
The University of Western Australia
21 shared publications Sascha W. Schediwy
9 shared publications- Skevos F. E. Karpathakis
International Centre for Radio Astronomy Research The University of Western Australia 35 Stirling Highway 6009 Perth Australia
9 shared publications - Sascha Schediwy
International Centre for Radio Astronomy Research, The University of Western Australia, Perth 6009, Australia
8 shared publications - Shane Walsh
International Centre for Radio Astronomy Research, The University of Western Australia, Perth 6009, Australia
8 shared publications - Alex Frost
International Centre for Radio Astronomy Research University of Western Australia Perth WA Australia
7 shared publications
Latest Publications
- 7 April 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (8) , 2092-2095
Relative wavefront error correction over a 2.4-km free-space optical link via machine learning
In coherent optical communication across turbulent atmospheric channels, reference beacons can be multiplexed with information-encoded signals during transmission. In this case, it is commonly assumed that the wavefront distortion of the two is equivalent. In contrast to this assumption, we present experimental evidence of relative wavefront errors (WFEs) between polarization-multiplexed reference beacons and signals, after passing through a 2.4-km atmospheric link. We develop machine learning (ML)-based wavefront correction algorithms to compensate for observed WFEs, via phase retrieval, resulting in up to a 2/3 reduction in the relative phase error variance. Further, we analyze the excess noise contributions from relative WFEs in the context of continuous-variable quantum key distribution (CV-QKD), where our findings suggest that if future CV-QKD implementations employ wavefront correction algorithms similar to those reported here, an order of magnitude increase in secure key rates may be forthcoming.
- 7 April 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (8) , 2092-2095
Relative wavefront error correction over a 2.4-km free-space optical link via machine learning
In coherent optical communication across turbulent atmospheric channels, reference beacons can be multiplexed with information-encoded signals during transmission. In this case, it is commonly assumed that the wavefront distortion of the two is equivalent. In contrast to this assumption, we present experimental evidence of relative wavefront errors (WFEs) between polarization-multiplexed reference beacons and signals, after passing through a 2.4-km atmospheric link. We develop machine learning (ML)-based wavefront correction algorithms to compensate for observed WFEs, via phase retrieval, resulting in up to a 2/3 reduction in the relative phase error variance. Further, we analyze the excess noise contributions from relative WFEs in the context of continuous-variable quantum key distribution (CV-QKD), where our findings suggest that if future CV-QKD implementations employ wavefront correction algorithms similar to those reported here, an order of magnitude increase in secure key rates may be forthcoming.
- 5 February 2026
- Published by Wiley in Advanced Quantum Technologies
- Vol. 9 (2)
Quantum Wavefront Correction Via Machine Learning for Satellite‐to‐Earth CV‐QKD
State‐of‐the‐art free‐space continuous‐variable quantum key distribution (CV‐QKD) protocols use phase reference pulses to modulate the wavefront of a real local oscillator at the receiver, thereby compensating for wavefront distortions caused by atmospheric turbulence. It is normally assumed that the wavefront distortion in the phase reference pulses is identical to the wavefront distortion in the quantum signals, which are multiplexed during transmission. However, in real‐world deployments, there can exist a relative wavefront error (WFE) between the reference pulses and quantum signals, which, among other deleterious effects, can severely limit secure key transfer in satellite‐to‐Earth CV‐QKD. In this work, we introduce machine learning‐based wavefront correction algorithms, which utilize multi‐plane light conversion for decomposition of the reference pulses and quantum signals into the Hermite‐Gaussian (HG) basis, then estimate the difference in HG mode phase measurements. Through detailed simulations of the Earth‐satellite channel, we demonstrate that our algorithm can identify and compensate for any relative WFEs that may exist. We quantify the gains available in our algorithm in terms of the CV‐QKD secure key rate. We show channels where positive secure key rates are obtained using our algorithms, while information loss without wavefront correction would result in null key rates.
- 5 February 2026
- Published by Wiley in Advanced Quantum Technologies
- Vol. 9 (2)
Quantum Wavefront Correction Via Machine Learning for Satellite‐to‐Earth CV‐QKD
State‐of‐the‐art free‐space continuous‐variable quantum key distribution (CV‐QKD) protocols use phase reference pulses to modulate the wavefront of a real local oscillator at the receiver, thereby compensating for wavefront distortions caused by atmospheric turbulence. It is normally assumed that the wavefront distortion in the phase reference pulses is identical to the wavefront distortion in the quantum signals, which are multiplexed during transmission. However, in real‐world deployments, there can exist a relative wavefront error (WFE) between the reference pulses and quantum signals, which, among other deleterious effects, can severely limit secure key transfer in satellite‐to‐Earth CV‐QKD. In this work, we introduce machine learning‐based wavefront correction algorithms, which utilize multi‐plane light conversion for decomposition of the reference pulses and quantum signals into the Hermite‐Gaussian (HG) basis, then estimate the difference in HG mode phase measurements. Through detailed simulations of the Earth‐satellite channel, we demonstrate that our algorithm can identify and compensate for any relative WFEs that may exist. We quantify the gains available in our algorithm in terms of the CV‐QKD secure key rate. We show channels where positive secure key rates are obtained using our algorithms, while information loss without wavefront correction would result in null key rates.
- 4 February 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (4) , 893-896
Phase stabilization for long-baseline interferometry of incoherent optical sources
The maximum baseline, and therefore resolution, of optical astronomical interferometers is limited by attenuation and phase noise within the optical path between the apertures and beam combiner, as well as the practical challenges of constructing optical delay lines more than a few hundred meters in length. We implement off-band phase stabilization on two fiber optic links of 85 km, creating a total baseline of 170 km. We show that the system is able to effectively phase stabilize signals from an incoherent pseudo-thermal source with a bandwidth of 11.2 nm. We are able to reduce the phase noise by 4–5 orders of magnitude between 1 and 100 Hz, such that we could resolve an applied phase difference of 0.16 cycles per second with continuous measurement. We show that, with phase stabilization active, the interferometer is able to recover both first-order and second-order photon correlations. These results demonstrate the feasibility of this technique for long-baseline optical and quantum astronomical interferometers. The present results are limited by chromatic dispersion within the fiber, which can be mitigated using dispersion-compensating modules.
- 4 February 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (4) , 893-896
Phase stabilization for long-baseline interferometry of incoherent optical sources
The maximum baseline, and therefore resolution, of optical astronomical interferometers is limited by attenuation and phase noise within the optical path between the apertures and beam combiner, as well as the practical challenges of constructing optical delay lines more than a few hundred meters in length. We implement off-band phase stabilization on two fiber optic links of 85 km, creating a total baseline of 170 km. We show that the system is able to effectively phase stabilize signals from an incoherent pseudo-thermal source with a bandwidth of 11.2 nm. We are able to reduce the phase noise by 4–5 orders of magnitude between 1 and 100 Hz, such that we could resolve an applied phase difference of 0.16 cycles per second with continuous measurement. We show that, with phase stabilization active, the interferometer is able to recover both first-order and second-order photon correlations. These results demonstrate the feasibility of this technique for long-baseline optical and quantum astronomical interferometers. The present results are limited by chromatic dispersion within the fiber, which can be mitigated using dispersion-compensating modules.
- 15 January 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (2) , 2061-2074
Rapidly tunable synthetic wavelength ranging with an RFSoC
Measurements of optical range and time-of-flight are crucial for a variety of high-precision technologies. Competitive optical measurement techniques have been developed that balance precision with accuracy and system complexity. Here, we present a continuous-wave synthetic wavelength interferometry technique that employs digitally tunable electro-optic frequency combs. With a software-defined radio, our approach can dynamically sweep the synthetic wavelength and measure absolute optical range. We demonstrate this digital approach over a free-space optical delay line of 1 m and over a 40 km fiber link. The best obtained precision over the delay line is better than 60 nm (0.2 fs). Through a 40 km fiber spool, this precision degrades to 15 µm (50 fs), which is a fractional error on the order of 2 × 10 −10 m/m. Our design is simple to implement and only relies on continuous-wave interference, decreasing system complexity.
- 15 January 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (2) , 2061-2074
Rapidly tunable synthetic wavelength ranging with an RFSoC
Measurements of optical range and time-of-flight are crucial for a variety of high-precision technologies. Competitive optical measurement techniques have been developed that balance precision with accuracy and system complexity. Here, we present a continuous-wave synthetic wavelength interferometry technique that employs digitally tunable electro-optic frequency combs. With a software-defined radio, our approach can dynamically sweep the synthetic wavelength and measure absolute optical range. We demonstrate this digital approach over a free-space optical delay line of 1 m and over a 40 km fiber link. The best obtained precision over the delay line is better than 60 nm (0.2 fs). Through a 40 km fiber spool, this precision degrades to 15 µm (50 fs), which is a fractional error on the order of 2 × 10 −10 m/m. Our design is simple to implement and only relies on continuous-wave interference, decreasing system complexity.
- 17 November 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (23) , 7191-7194
Super-resolving binary-source hypothesis testing with a double-clad fiber coupler
We present a technique for binary spatial mode demultiplexing, using a double-clad fiber coupler as an optical mode sorter, for hypothesis testing for one or two point sources in an incident optical field. By directly coupling an optical field through a double-clad fiber coupler, we demultiplex the field into the fundamental mode and a superposition of higher-order modes. We use the ratio of multi-mode to single-mode power to distinguish between single and double point sources. In a tabletop demonstration of the technique, we demonstrate the capability to accurately identify the presence of two sources separated below the Rayleigh limit for relative brightnesses from 0 dB to −20 dB. For sources with less than 5 dB difference in their relative powers, our imaging protocol can correctly determine the presence of a second optical source even when the two sources have separations 50× smaller than the Rayleigh limit. These results highlight the potential of this technique as a simple tool for super-resolving classification of a pair of point emitters, especially in the context of astronomical imaging for binary systems.
- 17 November 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (23) , 7191-7194
Super-resolving binary-source hypothesis testing with a double-clad fiber coupler
We present a technique for binary spatial mode demultiplexing, using a double-clad fiber coupler as an optical mode sorter, for hypothesis testing for one or two point sources in an incident optical field. By directly coupling an optical field through a double-clad fiber coupler, we demultiplex the field into the fundamental mode and a superposition of higher-order modes. We use the ratio of multi-mode to single-mode power to distinguish between single and double point sources. In a tabletop demonstration of the technique, we demonstrate the capability to accurately identify the presence of two sources separated below the Rayleigh limit for relative brightnesses from 0 dB to −20 dB. For sources with less than 5 dB difference in their relative powers, our imaging protocol can correctly determine the presence of a second optical source even when the two sources have separations 50× smaller than the Rayleigh limit. These results highlight the potential of this technique as a simple tool for super-resolving classification of a pair of point emitters, especially in the context of astronomical imaging for binary systems.
- 15 October 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (21) , 45142-45153
Uplink pre-compensation for ground-to-space optical communications using downlink tomographic reconstruction
Uplink pre-compensation in ground-to-satellite optical links remains a problem, with an appropriate measurement of the wavefront error in the uplink path often not being available. We present a method that uses successive measurements of the readily accessible downlink beam to perform a tomographic reconstruction of the volume of atmosphere common to the downlink beam and the ground-station field-of-view. These measurements are done through the existing downlink wavefront sensor. From here, an estimate of the wavefront error along the uplink path can be obtained. We evaluate this method in simulation over representative atmospheric conditions and find good performance, especially for situations where the satellite point-ahead angle is many times greater than the atmosphere’s isoplanatic angle. Compared to pre-compensation directly using the downlink phase, we find that this method estimates the uplink path with a residual mean-square wavefront error that is up to 8.6 times less. The hardware simplicity of this method makes it a promising solution for uplink pre-compensation implementations targeted at optical communications.
- 15 October 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (21) , 45142-45153
Uplink pre-compensation for ground-to-space optical communications using downlink tomographic reconstruction
Uplink pre-compensation in ground-to-satellite optical links remains a problem, with an appropriate measurement of the wavefront error in the uplink path often not being available. We present a method that uses successive measurements of the readily accessible downlink beam to perform a tomographic reconstruction of the volume of atmosphere common to the downlink beam and the ground-station field-of-view. These measurements are done through the existing downlink wavefront sensor. From here, an estimate of the wavefront error along the uplink path can be obtained. We evaluate this method in simulation over representative atmospheric conditions and find good performance, especially for situations where the satellite point-ahead angle is many times greater than the atmosphere’s isoplanatic angle. Compared to pre-compensation directly using the downlink phase, we find that this method estimates the uplink path with a residual mean-square wavefront error that is up to 8.6 times less. The hardware simplicity of this method makes it a promising solution for uplink pre-compensation implementations targeted at optical communications.
- Open Access
Super-Resolution Parameter Estimation Using Machine Learning-Assisted Spatial Mode Demultiplexing
We present the use of a light-weight machine learning (ML) model to estimate the separation and relative brightness of two incoherent light sources below the diffraction limit. We use a multi-planar light converter (MPLC) to implement spatial mode demultiplexing (SPADE) imaging. The ML model is trained, validated, and tested on data generated experimentally in the laboratory. The ML model accurately estimates the separation of the sources to up to two orders of magnitude below the diffraction limit when the sources are of comparable brightness, and provides accurate sub-diffraction separation resolution even when the sources differ in brightness by four orders of magnitude. The present results are limited by cross talk in the MPLC and support the potential use of ML-assisted SPADE for astronomical imaging below the diffraction limit.
Open AccessSuper-Resolution Parameter Estimation Using Machine Learning-Assisted Spatial Mode Demultiplexing
We present the use of a light-weight machine learning (ML) model to estimate the separation and relative brightness of two incoherent light sources below the diffraction limit. We use a multi-planar light converter (MPLC) to implement spatial mode demultiplexing (SPADE) imaging. The ML model is trained, validated, and tested on data generated experimentally in the laboratory. The ML model accurately estimates the separation of the sources to up to two orders of magnitude below the diffraction limit when the sources are of comparable brightness, and provides accurate sub-diffraction separation resolution even when the sources differ in brightness by four orders of magnitude. The present results are limited by cross talk in the MPLC and support the potential use of ML-assisted SPADE for astronomical imaging below the diffraction limit.
- 6 August 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (16) , 34651-34662
Spatial mode demultiplexing for super-resolved source parameter estimation
We present the use of a multi-planar light converter (MPLC) to perform spatial mode demultiplexing (SPADE) for optical source parameter estimation. This technique has been extended to use higher-order Hermite-Gaussian modes for the purposes of estimating the separation of a pair of incoherent sources, both above and below the diffraction limit. We resolve these sources at separations 90× lower than the diffraction limit. We also show our system is capable of simultaneous separation estimation and relative power estimation while maintaining super-resolving capabilities, with relative power differences as large as 20 dB by using the additional information gained by incorporation of the higher order modes. These results support the potential use of SPADE for astronomical imaging of binary systems.
- 6 August 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (16) , 34651-34662
Spatial mode demultiplexing for super-resolved source parameter estimation
We present the use of a multi-planar light converter (MPLC) to perform spatial mode demultiplexing (SPADE) for optical source parameter estimation. This technique has been extended to use higher-order Hermite-Gaussian modes for the purposes of estimating the separation of a pair of incoherent sources, both above and below the diffraction limit. We resolve these sources at separations 90× lower than the diffraction limit. We also show our system is capable of simultaneous separation estimation and relative power estimation while maintaining super-resolving capabilities, with relative power differences as large as 20 dB by using the additional information gained by incorporation of the higher order modes. These results support the potential use of SPADE for astronomical imaging of binary systems.
- 29 May 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (11) , 3764-3767
Digital multi-wavelength optical absolute ranging
Optical metrology underpins sensing applications that require extreme precision and accuracy. Optical metrology with a continuous-wave source is constrained by the near-ambiguous range of one optical wavelength, limiting the realization of full interferometric sensitivity. We present a digitally tunable, multi-wavelength continuous-wave optical phase measurement scheme, which can be used for absolute laser ranging. This system was demonstrated over a free-space link on an optical bench, with a distance uncertainty of, at best, 0.2 μm—sufficient to resolve the continuous-wave optical fringe. This design is flexible and can be applied to both coherent optical ranging and optical time and frequency transfer.
- 29 May 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (11) , 3764-3767
Digital multi-wavelength optical absolute ranging
Optical metrology underpins sensing applications that require extreme precision and accuracy. Optical metrology with a continuous-wave source is constrained by the near-ambiguous range of one optical wavelength, limiting the realization of full interferometric sensitivity. We present a digitally tunable, multi-wavelength continuous-wave optical phase measurement scheme, which can be used for absolute laser ranging. This system was demonstrated over a free-space link on an optical bench, with a distance uncertainty of, at best, 0.2 μm—sufficient to resolve the continuous-wave optical fringe. This design is flexible and can be applied to both coherent optical ranging and optical time and frequency transfer.
- 18 February 2025
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 23 (2)
Free-space optical-frequency comparison over rapidly moving links
- 18 February 2025
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 23 (2)
Free-space optical-frequency comparison over rapidly moving links