Xinyue Zhang
Xinyue Zhang has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Meredith Natania Silberstein
Sibley School of Mechanical and Aerospace Engineering, Cornell University
3 shared publications Hongyi Cai
Department of Materials Science and Engineering Cornell University Ithaca NY 14850 USA
2 shared publicationsRalph Crisci
Department of Chemistry University of Michigan Ann Arbor MI 48109 USA
2 shared publicationsAnthony S. Clare
Newcastle University
1 shared publication- Anthony S. Clare
School of Natural and Environmental Sciences, Newcastle University, Newcastle upon Tyne NE1 7RU, UK
1 shared publication Arman Boromand
Meta Reality Labs, USA
1 shared publication
Latest Publications
- Open Access
- 31 October 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (50) , 43161-43173
Genetic algorithm-accelerated computational discovery of liquid crystal polymers with enhanced optical properties
We employ a genetic algorithm to efficiently screen and optimize liquid crystal building blocks using a rapid, accurate computational pipeline for simulating their optical properties.
- 31 October 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (50) , 43161-43173
Open AccessGenetic algorithm-accelerated computational discovery of liquid crystal polymers with enhanced optical properties
We employ a genetic algorithm to efficiently screen and optimize liquid crystal building blocks using a rapid, accurate computational pipeline for simulating their optical properties.
- 7 April 2022
- Published by Wiley in Advanced Materials Interfaces
- Vol. 9 (15)
Enabling Tunable Water‐Responsive Surface Adaptation of PDMS via Metal–Ligand Coordinated Dynamic Networks
Polymers are at the core of emerging flexible sensor and soft actuator technology. Ideal candidates not only respond to external stimuli but also have programmable response intensity and speed. Incorporating dynamic interactions into polymers has been widely studied. However, most research has focused on synthesis methods and on optical and mechanical effects of these interactions. Here, a new and tunable method of enabling environmentally adaptive polymers are introduced. Specifically, polar functionalities are “hidden” within polydimethylsiloxane (PDMS). When unveiled, these polar functionalities change the hydrophilicity of the polymer. Water is the stimulus that triggers the exposure of polar functionalities by disrupting interfacial equilibrium and driving surface reconstruction. This reversible adaptation is governed by the dynamics of a metal–ligand coordinated polymer, and therefore can be easily tailored by the choice of network structure, metal cations, and counter anions. PDMS is a particularly exciting polymer for this functionality because of the negative consequences of its intrinsically high hydrophobicity in many applications. However, this design concept is applicable to a wide range of polymers and can be expanded to other dynamic interactions such as reversible covalent bonding, hydrogen bonding, and ionic bonding, to empower programmable responsive functionality and therefore enhance material performance.
- 7 April 2022
- Published by Wiley in Advanced Materials Interfaces
- Vol. 9 (15)
Enabling Tunable Water‐Responsive Surface Adaptation of PDMS via Metal–Ligand Coordinated Dynamic Networks
Polymers are at the core of emerging flexible sensor and soft actuator technology. Ideal candidates not only respond to external stimuli but also have programmable response intensity and speed. Incorporating dynamic interactions into polymers has been widely studied. However, most research has focused on synthesis methods and on optical and mechanical effects of these interactions. Here, a new and tunable method of enabling environmentally adaptive polymers are introduced. Specifically, polar functionalities are “hidden” within polydimethylsiloxane (PDMS). When unveiled, these polar functionalities change the hydrophilicity of the polymer. Water is the stimulus that triggers the exposure of polar functionalities by disrupting interfacial equilibrium and driving surface reconstruction. This reversible adaptation is governed by the dynamics of a metal–ligand coordinated polymer, and therefore can be easily tailored by the choice of network structure, metal cations, and counter anions. PDMS is a particularly exciting polymer for this functionality because of the negative consequences of its intrinsically high hydrophobicity in many applications. However, this design concept is applicable to a wide range of polymers and can be expanded to other dynamic interactions such as reversible covalent bonding, hydrogen bonding, and ionic bonding, to empower programmable responsive functionality and therefore enhance material performance.
- Open Access
- 16 November 2021
- Published by American Chemical Society (ACS) in ChemRxiv
Enabling Tunable Hydrophilicity of PDMS via Metal-ligand Coordinated Dynamic Networks
Polydimethylsiloxane (PDMS) has been widely used in various fields due to its appealing physical and chemical properties. However, its high hydrophobicity not only yields poor adhesion to substrates but also facilitates undesired adsorption of substances such as proteins, biofoulers, etc., which limits the performance and lifetime of PDMS. Moreover, traditional surface modification techniques are often not efficient on PDMS surfaces because of the surface reconstruction. Although new methods involving chemical modification have been developed, most of them require complicated procedures and equipment. To overcome this challenge, we incorporate metal-ligand coordination, a non-covalent interaction bearing polar functionality, into PDMS, which exposes the hydrophilicity progressively upon dynamic bond breakage and reformation. We demonstrate that the hydrophilicity of coordinated PDMS can be tailored by the choice of network structure, counter anions, and metal cations, which yield distinct network dynamics. The wetting mechanism is discussed in the context of chain reconfiguration and surface reconstruction. We also show that a properly designed metal-ligand coordinated PDMS has potential as a superior marine fouling release coating by weakening diatom attachment. Through this paper, we introduce a new concept for tuning material hydrophilicity via dynamic polar functionalities, which is applicable to a wide range of polymers.
- 16 November 2021
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessEnabling Tunable Hydrophilicity of PDMS via Metal-ligand Coordinated Dynamic Networks
Polydimethylsiloxane (PDMS) has been widely used in various fields due to its appealing physical and chemical properties. However, its high hydrophobicity not only yields poor adhesion to substrates but also facilitates undesired adsorption of substances such as proteins, biofoulers, etc., which limits the performance and lifetime of PDMS. Moreover, traditional surface modification techniques are often not efficient on PDMS surfaces because of the surface reconstruction. Although new methods involving chemical modification have been developed, most of them require complicated procedures and equipment. To overcome this challenge, we incorporate metal-ligand coordination, a non-covalent interaction bearing polar functionality, into PDMS, which exposes the hydrophilicity progressively upon dynamic bond breakage and reformation. We demonstrate that the hydrophilicity of coordinated PDMS can be tailored by the choice of network structure, counter anions, and metal cations, which yield distinct network dynamics. The wetting mechanism is discussed in the context of chain reconfiguration and surface reconstruction. We also show that a properly designed metal-ligand coordinated PDMS has potential as a superior marine fouling release coating by weakening diatom attachment. Through this paper, we introduce a new concept for tuning material hydrophilicity via dynamic polar functionalities, which is applicable to a wide range of polymers.
- Top Cited PapersOpen Access
- 23 July 2021
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 7 (30) , eabg3677
Digital light processing of liquid crystal elastomers for self-sensing artificial muscles
Artificial muscles based on stimuli-responsive polymers usually exhibit mechanical compliance, versatility, and high power-to-weight ratio, showing great promise to potentially replace conventional rigid motors for next-generation soft robots, wearable electronics, and biomedical devices. In particular, thermomechanical liquid crystal elastomers (LCEs) constitute artificial muscle-like actuators that can be remotely triggered for large stroke, fast response, and highly repeatable actuations. Here, we introduce a digital light processing (DLP)–based additive manufacturing approach that automatically shear aligns mesogenic oligomers, layer-by-layer, to achieve high orientational order in the photocrosslinked structures; this ordering yields high specific work capacity (63 J kg−1) and energy density (0.18 MJ m−3). We demonstrate actuators composed of these DLP printed LCEs’ applications in soft robotics, such as reversible grasping, untethered crawling, and weightlifting. Furthermore, we present an LCE self-sensing system that exploits thermally induced optical transition as an intrinsic option toward feedback control.
- 23 July 2021
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 7 (30) , eabg3677
Top Cited PapersOpen AccessDigital light processing of liquid crystal elastomers for self-sensing artificial muscles
Artificial muscles based on stimuli-responsive polymers usually exhibit mechanical compliance, versatility, and high power-to-weight ratio, showing great promise to potentially replace conventional rigid motors for next-generation soft robots, wearable electronics, and biomedical devices. In particular, thermomechanical liquid crystal elastomers (LCEs) constitute artificial muscle-like actuators that can be remotely triggered for large stroke, fast response, and highly repeatable actuations. Here, we introduce a digital light processing (DLP)–based additive manufacturing approach that automatically shear aligns mesogenic oligomers, layer-by-layer, to achieve high orientational order in the photocrosslinked structures; this ordering yields high specific work capacity (63 J kg−1) and energy density (0.18 MJ m−3). We demonstrate actuators composed of these DLP printed LCEs’ applications in soft robotics, such as reversible grasping, untethered crawling, and weightlifting. Furthermore, we present an LCE self-sensing system that exploits thermally induced optical transition as an intrinsic option toward feedback control.
- 6 August 2020
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 16 (37) , 8591-8601
Bridging experiments and theory: isolating the effects of metal–ligand interactions on viscoelasticity of reversible polymer networks
A systematic study of the effect of metal–ligand interactions on the viscoelastic properties of the reversible polymer networks.
- 6 August 2020
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 16 (37) , 8591-8601
Bridging experiments and theory: isolating the effects of metal–ligand interactions on viscoelasticity of reversible polymer networks
A systematic study of the effect of metal–ligand interactions on the viscoelastic properties of the reversible polymer networks.