Hanjin Luo
Research Subjects
Research Interests
Hanjin Luo has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
Qianwei Liang
College of Geography and Environmental Sciences, Zhejiang Normal University, Jinhua 321004, China
7 shared publications- Hou Wang
College of Environmental Science and Engineering and Key Laboratory of Environmental Biology and Pollution Control (Ministry of Education), Hunan University, Changsha, China
5 shared publications Junjie Geng
School of Environment and Energy
5 shared publicationsYan Wu
College of Environment and Energy, South China University of Technology, Guangzhou, 510006, People's Republic of China
5 shared publicationsWei Fang
South China Institute of Environmental Sciences, Ministry of Ecology and Environment, Guangzhou 510655, China
4 shared publicationsLi Zhang
School of Environment and Energy, South China University of Technology, Guangzhou Higher Education Mega Centre, Guangzhou 510006, PR China; The Key Lab of Pollution Control and Ecosystem Restoration in Industry Cluster of Ministry of Education, Guangzhou 510006, PR China
3 shared publications
Latest Publications
- 18 April 2023
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 47 (21) , 10360-10371
Mn–Ce oxide-modified activated carbon composites as efficient adsorbents for removing As( iii ) from water: adsorption performance and mechanisms
The proposed possible mechanisms of As( iii ) removal by Mn–Ce/AC 3 .
- 18 April 2023
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 47 (21) , 10360-10371
Mn–Ce oxide-modified activated carbon composites as efficient adsorbents for removing As( iii ) from water: adsorption performance and mechanisms
The proposed possible mechanisms of As( iii ) removal by Mn–Ce/AC 3 .
- 13 April 2023
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 11 (3) , 109905
Magnetic Fe/N-codoped carbon derived from modified Fe-base MOFs: Synergism of multiple active sites for peroxymonosulfate activation
- 13 April 2023
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 11 (3) , 109905
Magnetic Fe/N-codoped carbon derived from modified Fe-base MOFs: Synergism of multiple active sites for peroxymonosulfate activation
- 25 August 2022
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 30 (3) , 6746-6757
One-step synthesis of nitrogen-functionalized graphene aerogel for efficient removal of hexavalent chromium in water
The efficient removal of hexavalent chromium (Cr(VI)) with high toxicity has attracted widespread concern since it causes serious harm to ecological environment and public health. Herein, we report a novel nitrogen-functionalized graphene aerogel with stereoscopic structure through a simple hydrothermal method and freeze drying for Cr(VI) removal from water. Graphene oxide (GO) and nitrogenous organics polyethyleneimine (PEI) and pyrrole are used as raw materials for preparing PEI/polypyrrole/GO aerogel (PPGA) adsorbent. PEI and pyrrole act as nitrogen sources to introduce nitrogenous functional groups, and also take on the role of cross-linkers for helping GO sheets to form stereoscopic structure. The obtained PPGA has a fast adsorption rate, excellent reusability, and shows a remarkable adsorption capacity for Cr(VI) up to 458.24 mg/g under the optimal conditions (pH 2.0, 298 K, Cr(VI): 600 mg/L, dosage: 0.4 g/L). The adsorption process of Cr(VI) on PPGA can fit the pseudo-second-order kinetic model well. Analysis of intraparticle diffusion shows that the Cr(VI) removal process is a multi-step process. Adsorption thermodynamic and isotherm results demonstrate Cr(VI) adsorption on PPGA is a spontaneous endothermic process. The adsorption mechanism involves electrostatic attraction, redox, and chelation. In general, this work provides a simple and eco-friendly way to prepare PPGA, which has a great potential for actual application of Cr(VI) removal in effluent. Graphical abstract
- 25 August 2022
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 30 (3) , 6746-6757
One-step synthesis of nitrogen-functionalized graphene aerogel for efficient removal of hexavalent chromium in water
The efficient removal of hexavalent chromium (Cr(VI)) with high toxicity has attracted widespread concern since it causes serious harm to ecological environment and public health. Herein, we report a novel nitrogen-functionalized graphene aerogel with stereoscopic structure through a simple hydrothermal method and freeze drying for Cr(VI) removal from water. Graphene oxide (GO) and nitrogenous organics polyethyleneimine (PEI) and pyrrole are used as raw materials for preparing PEI/polypyrrole/GO aerogel (PPGA) adsorbent. PEI and pyrrole act as nitrogen sources to introduce nitrogenous functional groups, and also take on the role of cross-linkers for helping GO sheets to form stereoscopic structure. The obtained PPGA has a fast adsorption rate, excellent reusability, and shows a remarkable adsorption capacity for Cr(VI) up to 458.24 mg/g under the optimal conditions (pH 2.0, 298 K, Cr(VI): 600 mg/L, dosage: 0.4 g/L). The adsorption process of Cr(VI) on PPGA can fit the pseudo-second-order kinetic model well. Analysis of intraparticle diffusion shows that the Cr(VI) removal process is a multi-step process. Adsorption thermodynamic and isotherm results demonstrate Cr(VI) adsorption on PPGA is a spontaneous endothermic process. The adsorption mechanism involves electrostatic attraction, redox, and chelation. In general, this work provides a simple and eco-friendly way to prepare PPGA, which has a great potential for actual application of Cr(VI) removal in effluent. Graphical abstract
- 4 May 2022
- Published by Elsevier in Chemosphere
- Vol. 302, 134832
Surface oxygen vacancies and carbon dopant co-decorated magnetic ZnFe2O4 as photo-Fenton catalyst towards efficient degradation of tetracycline hydrochloride
- 4 May 2022
- Published by Elsevier in Chemosphere
- Vol. 302, 134832
Surface oxygen vacancies and carbon dopant co-decorated magnetic ZnFe2O4 as photo-Fenton catalyst towards efficient degradation of tetracycline hydrochloride
- 25 January 2021
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 28 (11) , 13084-13096
Enhanced removal of toxic hexavalent chromium from aqueous solution by magnetic Zr-MOF@polypyrrole: performance and mechanism
Magnetic Zr–based metal organic framework (UiO-66) @Polypyrrole (magnetic UiO-66@Ppy) was prepared to eliminate Cr(VI) from water. SEM and TEM results clearly revealed that the magnetic UiO-66@Ppy was a core-double-shell structure with the core of Fe3O4, inner shell UiO-66, and outer shell Ppy. The introduction of zirconium MOFs UiO-66 effectively prevented the agglomeration of polypyrrole and provided more available adsorption sites, the surface area increased from 9.57 m2/g (Ppy) to 10.57 m2/g (Fe3O4@Ppy) and 52.49 m2/g (magnetic UiO-66@Ppy). The magnetic UiO-66@Ppy possessed a high adsorption capacity of 259.1 mg/g in removing Cr(VI) from water. Adsorption kinetics followed the pseudo-second-order model. The removal of Cr(VI) involved the following mechanisms: (1) electrostatic attraction and ions exchange, the HCrO4− was adsorbed on the surface of magnetic UiO-66@Ppy by the protonated N(PpyN+) and Cl−; (2) reduction, Cr(VI) was reduced to Cr(III) by the reductive functional group(-NH-); (3) chelation, Cr(III) was immobilized on adsorbent by amine groups.
- 25 January 2021
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 28 (11) , 13084-13096
Enhanced removal of toxic hexavalent chromium from aqueous solution by magnetic Zr-MOF@polypyrrole: performance and mechanism
Magnetic Zr–based metal organic framework (UiO-66) @Polypyrrole (magnetic UiO-66@Ppy) was prepared to eliminate Cr(VI) from water. SEM and TEM results clearly revealed that the magnetic UiO-66@Ppy was a core-double-shell structure with the core of Fe3O4, inner shell UiO-66, and outer shell Ppy. The introduction of zirconium MOFs UiO-66 effectively prevented the agglomeration of polypyrrole and provided more available adsorption sites, the surface area increased from 9.57 m2/g (Ppy) to 10.57 m2/g (Fe3O4@Ppy) and 52.49 m2/g (magnetic UiO-66@Ppy). The magnetic UiO-66@Ppy possessed a high adsorption capacity of 259.1 mg/g in removing Cr(VI) from water. Adsorption kinetics followed the pseudo-second-order model. The removal of Cr(VI) involved the following mechanisms: (1) electrostatic attraction and ions exchange, the HCrO4− was adsorbed on the surface of magnetic UiO-66@Ppy by the protonated N(PpyN+) and Cl−; (2) reduction, Cr(VI) was reduced to Cr(III) by the reductive functional group(-NH-); (3) chelation, Cr(III) was immobilized on adsorbent by amine groups.
- 28 July 2020
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 44 (34) , 14389-14400
Adsorption of arsenite by core–shell K-OMS-2@UiO-66 microspheres: performance and mechanism
Arsenite (As(III)) is more toxic and more difficult to remove from water than arsenate (As(V)). A new nano core–shell-structured K-OMS-2@UiO-66 (K-OMS-2, formula KMn8O16·nH2O) was fabricated via a facile one-step oxidation–coprecipitation method for enhanced As(III) removal. Results showed that the maximal adsorption capacity of As(III) achieved was 180.10 mg g−1. The as-synthesized K-OMS-2@UiO-66 adsorbent functions excellently across a broad pH range of 1.5 to 10.0, and the residual concentrations of As(III) can drop under 10.0 μg L−1. Based on XPS and FTIR measurements, it is proposed that the removal mechanism was mainly controlled through a synergistic interaction of surface complexation and hydrogen bonding. As(III) was sorbed onto the surface of the sorbent by Zr–O bonds and Mn–O bonds. Mn(IV) and Mn(III) in K-OMS-2@UiO-66 effectively oxidized As(III) to As(V). Then, some negatively charged As(V) were adsorbed at the positive sites of the adsorbent through electrostatic attraction, while others formed bidentate complexes with the Zr–O bonds. This study develops an attractive sorbent for As(III) removal from contaminated water and has a facile and low-cost synthesis process, good As(III) sorption performance, and reusability.
- 28 July 2020
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 44 (34) , 14389-14400
Adsorption of arsenite by core–shell K-OMS-2@UiO-66 microspheres: performance and mechanism
Arsenite (As(III)) is more toxic and more difficult to remove from water than arsenate (As(V)). A new nano core–shell-structured K-OMS-2@UiO-66 (K-OMS-2, formula KMn8O16·nH2O) was fabricated via a facile one-step oxidation–coprecipitation method for enhanced As(III) removal. Results showed that the maximal adsorption capacity of As(III) achieved was 180.10 mg g−1. The as-synthesized K-OMS-2@UiO-66 adsorbent functions excellently across a broad pH range of 1.5 to 10.0, and the residual concentrations of As(III) can drop under 10.0 μg L−1. Based on XPS and FTIR measurements, it is proposed that the removal mechanism was mainly controlled through a synergistic interaction of surface complexation and hydrogen bonding. As(III) was sorbed onto the surface of the sorbent by Zr–O bonds and Mn–O bonds. Mn(IV) and Mn(III) in K-OMS-2@UiO-66 effectively oxidized As(III) to As(V). Then, some negatively charged As(V) were adsorbed at the positive sites of the adsorbent through electrostatic attraction, while others formed bidentate complexes with the Zr–O bonds. This study develops an attractive sorbent for As(III) removal from contaminated water and has a facile and low-cost synthesis process, good As(III) sorption performance, and reusability.
- 16 January 2020
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 27 (10) , 10715-10728
Functional rGO aerogel as a potential adsorbent for removing hazardous hexavalent chromium: adsorption performance and mechanism
A novel functional rGO aerogel was synthesized by a facile hydrothermal method. In this process, graphene oxide (GO) was used as the precursor and oxidant to synthesize the aerogels. Ethylenediaminetetraacetic acid disodium salt (EDTA-2Na) and pyrrole monomer (reducing agent) were selected to use as hole scavenger and nitrogen sources. The obtained EDTA-2Na/polypyrrole (Ppy)/rGO aerogel (EPGA) has a high adsorption capacity for Cr(VI) anions, and the maximum adsorption capacity reached 361 mg/g at 298 K at pH of 2. In addition, EPGA exhibited a good ability to selectively remove Cr(VI) anions under the effect of coexisting ions (Cl−, NO3−, SO42−, PO43−, Ni+, Cu2+, Zn2+, and Cd2+) and good regeneration ability. The kinetics process and adsorption isotherm can be fitted well with the pseudo-second-order kinetic model and Freundlich isotherm model, respectively. The removal mechanism involved electrostatic interaction, reduction, ion exchange, and chelation process. This work provides a simple and environmentally friendly synthetic route for EPGA, which will be a potential candidate for efficient removal Cr(VI) anions from industrial wastewater.
- 16 January 2020
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 27 (10) , 10715-10728
Functional rGO aerogel as a potential adsorbent for removing hazardous hexavalent chromium: adsorption performance and mechanism
A novel functional rGO aerogel was synthesized by a facile hydrothermal method. In this process, graphene oxide (GO) was used as the precursor and oxidant to synthesize the aerogels. Ethylenediaminetetraacetic acid disodium salt (EDTA-2Na) and pyrrole monomer (reducing agent) were selected to use as hole scavenger and nitrogen sources. The obtained EDTA-2Na/polypyrrole (Ppy)/rGO aerogel (EPGA) has a high adsorption capacity for Cr(VI) anions, and the maximum adsorption capacity reached 361 mg/g at 298 K at pH of 2. In addition, EPGA exhibited a good ability to selectively remove Cr(VI) anions under the effect of coexisting ions (Cl−, NO3−, SO42−, PO43−, Ni+, Cu2+, Zn2+, and Cd2+) and good regeneration ability. The kinetics process and adsorption isotherm can be fitted well with the pseudo-second-order kinetic model and Freundlich isotherm model, respectively. The removal mechanism involved electrostatic interaction, reduction, ion exchange, and chelation process. This work provides a simple and environmentally friendly synthetic route for EPGA, which will be a potential candidate for efficient removal Cr(VI) anions from industrial wastewater.
- 16 September 2019
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 26 (32) , 33507-33516
Synthesis of nano-scale zero-valent iron-reduced graphene oxide-silica nano-composites for the efficient removal of arsenic from aqueous solutions
Design and synthesis of arsenic adsorbents with high performance and excellent stability has been still a significant challenge. In this study, we anchored nano-zero-valent iron (NZVI) on the surface of graphene-silica composites (GS) with high specific surface area, forming the NZVI/GS nano-composite. The prepared nano-materials were used to remove As(III) and As(V) through adsorption from aqueous solutions. The results indicated that NZVI particles were dispersed well on the surface of GS, and the NZVI/GS showed great potential to remove As(III) and As(V). Adsorption performance of NZVI/GS for As(III) and As(V) highly depended on the pH of solutions. The experimental data fitted well with the pseudo-second-order kinetic model and the Langmuir isotherm model. The calculated maximum adsorption capacities of NZVI/GS for As(III) and As(V) were up to 45.57 mg/g and 45.12 mg/g at 298 K, respectively, and the adsorption equilibrium could be reached within 60 min. The residual concentrations of As(III) and As(V) after treatment with 0.4 g/L NZVI/GS can meet with the drinking water standard of WHO when the initial concentrations were below 4 mg/L and 3 mg/L, respectively. Moreover, the as-prepared NZVI/GS had excellent anti-interference ability during the process of As removal in the presence of foreign ions. During the As removal process, As(III) was oxidized to As(V), which could be removed through adsorption by electrostatic attraction and complexation. These results indicated that the as-synthesized NZVI/GS composite is a promising adsorbent for the removal of arsenic from aqueous solutions.
- 16 September 2019
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 26 (32) , 33507-33516
Synthesis of nano-scale zero-valent iron-reduced graphene oxide-silica nano-composites for the efficient removal of arsenic from aqueous solutions
Design and synthesis of arsenic adsorbents with high performance and excellent stability has been still a significant challenge. In this study, we anchored nano-zero-valent iron (NZVI) on the surface of graphene-silica composites (GS) with high specific surface area, forming the NZVI/GS nano-composite. The prepared nano-materials were used to remove As(III) and As(V) through adsorption from aqueous solutions. The results indicated that NZVI particles were dispersed well on the surface of GS, and the NZVI/GS showed great potential to remove As(III) and As(V). Adsorption performance of NZVI/GS for As(III) and As(V) highly depended on the pH of solutions. The experimental data fitted well with the pseudo-second-order kinetic model and the Langmuir isotherm model. The calculated maximum adsorption capacities of NZVI/GS for As(III) and As(V) were up to 45.57 mg/g and 45.12 mg/g at 298 K, respectively, and the adsorption equilibrium could be reached within 60 min. The residual concentrations of As(III) and As(V) after treatment with 0.4 g/L NZVI/GS can meet with the drinking water standard of WHO when the initial concentrations were below 4 mg/L and 3 mg/L, respectively. Moreover, the as-prepared NZVI/GS had excellent anti-interference ability during the process of As removal in the presence of foreign ions. During the As removal process, As(III) was oxidized to As(V), which could be removed through adsorption by electrostatic attraction and complexation. These results indicated that the as-synthesized NZVI/GS composite is a promising adsorbent for the removal of arsenic from aqueous solutions.
- 1 April 2018
- Published by Elsevier in Chemosphere
- Vol. 197, 594-602
Synthesis of graphene/SiO2@polypyrrole nanocomposites and their application for Cr(VI) removal in aqueous solution
- 1 April 2018
- Published by Elsevier in Chemosphere
- Vol. 197, 594-602
Synthesis of graphene/SiO2@polypyrrole nanocomposites and their application for Cr(VI) removal in aqueous solution