Manikonda Venkateswara Rao
Manikonda Venkateswara Rao has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Boddapati Taraka Phani Madhav
Koneru Lakshmaiah Education Foundation
8 shared publications T. Anilkumar
4 shared publicationsTirunagari Anilkumar
Antennas and Liquid Crystal Research Center (ALRC), Department of E C E Koneru Lakshmaiah Education Foundation Vaddeswaram Andhra Pradesh India
3 shared publicationsBadugu Prudhvi Nadh
Antennas and Liquid Crystals Research CenterKoneru Lakshmaiah Education Foundation Andhra Pradesh India
2 shared publications- Badugu Prudhvi Nadh
Department of Electronics and Communication Engineering, Malineni Lakshmaiah women’s Engineering college, Guntur, India
2 shared publications - Munuswamy Siva Kumar
Koneru Lakshmaiah Education Foundation
2 shared publications
Latest Publications
- Open Access
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2512 (1)
THz microstrip antenna array design for cancer detection through THz spectroscopy
There is increase in the sharing and consumption of information with the introduction of new model wireless devices. Communication through THz antennas is widel
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2512 (1)
Open AccessTHz microstrip antenna array design for cancer detection through THz spectroscopy
There is increase in the sharing and consumption of information with the introduction of new model wireless devices. Communication through THz antennas is widel
- 24 March 2022
- Published by Walter de Gruyter GmbH in Frequenz
- Vol. 76 (7-8) , 367-380
A triple band pattern reconfigurable planar antenna for 5G applications
This paper presents a triple-band planar antenna with diverse radiation patterns. The proposed planar antenna is a modified swastika shape with three fingers and the ground plane is a circle with rectangular slots etched on four sides radially. The slotted ground plane is loaded with Four PIN diodes to realign the surface current. Pattern reconfigurability is achieved at the triple bands by changing the states of the diode. The antenna operates in triple bands centered at 2.2, 2.9 and 3.5 GHz. The antenna is printed on FR4 Epoxy substrate. The simulated reflection coefficient is well below −10dB at resonant frequencies. The measured patterns and return loss are in very close agreement with the simulated results. This antenna can find potential applications in 5G systems.
- 24 March 2022
- Published by Walter de Gruyter GmbH in Frequenz
- Vol. 76 (7-8) , 367-380
A triple band pattern reconfigurable planar antenna for 5G applications
This paper presents a triple-band planar antenna with diverse radiation patterns. The proposed planar antenna is a modified swastika shape with three fingers and the ground plane is a circle with rectangular slots etched on four sides radially. The slotted ground plane is loaded with Four PIN diodes to realign the surface current. Pattern reconfigurability is achieved at the triple bands by changing the states of the diode. The antenna operates in triple bands centered at 2.2, 2.9 and 3.5 GHz. The antenna is printed on FR4 Epoxy substrate. The simulated reflection coefficient is well below −10dB at resonant frequencies. The measured patterns and return loss are in very close agreement with the simulated results. This antenna can find potential applications in 5G systems.
- 10 October 2019
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 62 (2) , 866-874
Circularly polarized flexible antenna on liquid crystal polymer substrate material with metamaterial loading
In this work, a metamaterial loaded circularly polarized (CP) flexible CPW fed antenna is presented. The flexible behavior of the antenna is analyzed and tested at various bending angles. The overall dimension of the liquid crystal polymer (LCP) antenna is 0.44 λ0 × 0.37 λ0, which is having thickness of 0.1 mm. The planar LCP antenna works at WiMAX (3.5 GHz), WLAN (5.8 GHz), and at vehicular communication band (5.9 GHz). Using metamaterial exhibiting split ring resonators and CSRR placement on the either side of the feedline and ground, we obtained circular polarization. Both planar and bending antenna cases are analyzed and results such as axial ratio, reflection coefficient, and radiation patterns with respect to planar and bending angles are validated with measurement results.
- 10 October 2019
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 62 (2) , 866-874
Circularly polarized flexible antenna on liquid crystal polymer substrate material with metamaterial loading
In this work, a metamaterial loaded circularly polarized (CP) flexible CPW fed antenna is presented. The flexible behavior of the antenna is analyzed and tested at various bending angles. The overall dimension of the liquid crystal polymer (LCP) antenna is 0.44 λ0 × 0.37 λ0, which is having thickness of 0.1 mm. The planar LCP antenna works at WiMAX (3.5 GHz), WLAN (5.8 GHz), and at vehicular communication band (5.9 GHz). Using metamaterial exhibiting split ring resonators and CSRR placement on the either side of the feedline and ground, we obtained circular polarization. Both planar and bending antenna cases are analyzed and results such as axial ratio, reflection coefficient, and radiation patterns with respect to planar and bending angles are validated with measurement results.
- 30 April 2019
- Published by The Intelligent Networks and Systems Society in International Journal of Intelligent Engineering and Systems
- Vol. 12 (2) , 53-61
Metamaterial Inspired Reconfigurable Fractal Monopole Antenna for Multiband Applications
- 30 April 2019
- Published by The Intelligent Networks and Systems Society in International Journal of Intelligent Engineering and Systems
- Vol. 12 (2) , 53-61
Metamaterial Inspired Reconfigurable Fractal Monopole Antenna for Multiband Applications
- 3 April 2019
- Published by Wiley in International Journal of RF and Microwave Computer-Aided Engineering
- Vol. 29 (8) , e21799
CSRR‐loaded T‐shaped MIMO antenna for 5G cellular networks and vehicular communications
- 3 April 2019
- Published by Wiley in International Journal of RF and Microwave Computer-Aided Engineering
- Vol. 29 (8) , e21799
CSRR‐loaded T‐shaped MIMO antenna for 5G cellular networks and vehicular communications
- 24 October 2018
- Published by Wiley in International Journal of RF and Microwave Computer-Aided Engineering
- Vol. 29 (4) , e21580
Circular ring structured ultra-wideband antenna for wearable applications
- 24 October 2018
- Published by Wiley in International Journal of RF and Microwave Computer-Aided Engineering
- Vol. 29 (4) , e21580
Circular ring structured ultra-wideband antenna for wearable applications
- 8 June 2018
- Published by Springer Nature in Wireless Personal Communications
- Vol. 103 (3) , 1965-1976
Conformal Band Notched Circular Monopole Antenna Loaded with Split Ring Resonator
- 8 June 2018
- Published by Springer Nature in Wireless Personal Communications
- Vol. 103 (3) , 1965-1976
Conformal Band Notched Circular Monopole Antenna Loaded with Split Ring Resonator
- 1 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1416-1422
Artificial Neural Network and Adaptive Neuro Fuzzy Control of Direct Torque Control of Induction Motor for Speed and Torque Ripple Control
This paper presents Artificial Neural Networks (ANN) and Adaptive Neural-Fuzzy Inference System (ANFIS) for reduction of torque and flux ripples in transient and steady state response of Direct Torque Control (DTC) for Induction Motor drive. The Flux and Electromagnetic torque can be controlled by using efficient Direct Torque Control (DTC) scheme This proposed technique is to improve the torque, speed and flux response with the Artificial Neural Network (ANN) and then with the Adaptive Neuro-Fuzzy Inference (ANFIS). This paper shows implementation of DTC system using ANN and ANFIS on three phase induction motor to optimize the flux and to improve the performance of fast stator flux response in transient state. To improve the performance of DTC with the modern technique using ANN and ANFIS approach is implemented and performance of ANN DTC compared with CDTC and ANN DTC with ANFIS is done, conclusion is about the ANN approach shows the better performance than CDTC and ANFIS shows superior performance than ANN. The performance has been tested by using MATLAB/SIMULINK and NEURAL NETWORK toolbox.
- 1 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1416-1422
Artificial Neural Network and Adaptive Neuro Fuzzy Control of Direct Torque Control of Induction Motor for Speed and Torque Ripple Control
This paper presents Artificial Neural Networks (ANN) and Adaptive Neural-Fuzzy Inference System (ANFIS) for reduction of torque and flux ripples in transient and steady state response of Direct Torque Control (DTC) for Induction Motor drive. The Flux and Electromagnetic torque can be controlled by using efficient Direct Torque Control (DTC) scheme This proposed technique is to improve the torque, speed and flux response with the Artificial Neural Network (ANN) and then with the Adaptive Neuro-Fuzzy Inference (ANFIS). This paper shows implementation of DTC system using ANN and ANFIS on three phase induction motor to optimize the flux and to improve the performance of fast stator flux response in transient state. To improve the performance of DTC with the modern technique using ANN and ANFIS approach is implemented and performance of ANN DTC compared with CDTC and ANN DTC with ANFIS is done, conclusion is about the ANN approach shows the better performance than CDTC and ANFIS shows superior performance than ANN. The performance has been tested by using MATLAB/SIMULINK and NEURAL NETWORK toolbox.