Sungho Yoon
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sungho Yoon has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
Alexander Stein
GE Power & Water, Greenville, SC 29615
1 shared publicationHiteshkumar Mistry
GE Global Research, Bangalore 560 006, India
1 shared publicationJonathan Ong
GE Global Research, Munich 85748, Germany
1 shared publicationPatricia Cargill
GE Aviation, Cincinnati, OH 45069
1 shared publication- Patricia Cargill
GE Aviation , Cincinnati, OH
1 shared publication Peter Wood
GE Aviation, Cincinnati, OH 45069
1 shared publication
Latest Publications
- 7 November 2022
- Published by Wiley in Journal of Turbomachinery
- Vol. 145 (4) , 1-24
Casing Treatment: Its Potential and Limitations
Casing treatment is an advanced design feature intended to improve the stability of a compressor. Various investigations have been conducted based on both experimental and numerical studies at least over the last 50 years. In general, it has been demonstrated that a careful design of a casing treatment can substantially improve the stall margin of a tip-limited compressor although this generally comes with an aerodynamic efficiency penalty. This review paper revisits important past studies on casing treatments to clarify findings on the sometimes-conflicting results and understand what lessons are generally applicable to a wider group of machines. Circumferential grooves over a rotor tip have been in use for some time. Much recent work has focused on axial slots over a rotor tip, because of the significant stall margin improvement and the better efficiency potential of this configuration. This paper includes both configurations, with more emphasis on the latter. The paper concludes that casing treatment offers powerful benefits to a compressor and deserves continuing research and development. Good benefits result from axial slots which start ahead of the rotor leading edge and cover the front part of the rotor tip and include skew (tangential lean in the direction of rotation). Contributing physical mechanisms include increasing the axial momentum of the casing flow casing and reducing the aerodynamic blockage to improve the casing boundary layer and the tip leakage flow. The role of impacting unsteadiness is yet to be further clarified. Areas of further research are recommended, both experimental and analytical, including further work to understand and control the loss mechanisms, studying and controlling stage interaction effects in multistage compressors, and the simultaneous design optimization of the rotor blade with the casing treatment. Multi-disciplinary issues such as manufacturing cost, weight, length, durability, aeromechanics effects, and tolerance to dust and ice also deserve further attention.
- 7 November 2022
- Published by Wiley in Journal of Turbomachinery
- Vol. 145 (4) , 1-24
Casing Treatment: Its Potential and Limitations
Casing treatment is an advanced design feature intended to improve the stability of a compressor. Various investigations have been conducted based on both experimental and numerical studies at least over the last 50 years. In general, it has been demonstrated that a careful design of a casing treatment can substantially improve the stall margin of a tip-limited compressor although this generally comes with an aerodynamic efficiency penalty. This review paper revisits important past studies on casing treatments to clarify findings on the sometimes-conflicting results and understand what lessons are generally applicable to a wider group of machines. Circumferential grooves over a rotor tip have been in use for some time. Much recent work has focused on axial slots over a rotor tip, because of the significant stall margin improvement and the better efficiency potential of this configuration. This paper includes both configurations, with more emphasis on the latter. The paper concludes that casing treatment offers powerful benefits to a compressor and deserves continuing research and development. Good benefits result from axial slots which start ahead of the rotor leading edge and cover the front part of the rotor tip and include skew (tangential lean in the direction of rotation). Contributing physical mechanisms include increasing the axial momentum of the casing flow casing and reducing the aerodynamic blockage to improve the casing boundary layer and the tip leakage flow. The role of impacting unsteadiness is yet to be further clarified. Areas of further research are recommended, both experimental and analytical, including further work to understand and control the loss mechanisms, studying and controlling stage interaction effects in multistage compressors, and the simultaneous design optimization of the rotor blade with the casing treatment. Multi-disciplinary issues such as manufacturing cost, weight, length, durability, aeromechanics effects, and tolerance to dust and ice also deserve further attention.
- 20 January 2016
- Published by Wiley in Journal of Turbomachinery
- Vol. 138 (5) , 051004
Loss Audit of a Turbine Stage
In order to achieve high aerodynamic efficiency of a turbine stage, it is crucial to identify the source of aerodynamic losses and understand the associated loss generation mechanisms. This helps a turbine designer to maximize the performance of the turbine stage. It is well known that aerodynamic losses include profile, endwall, cooling/mixing loss, leakage, and trailing edge loss components. However, it is not a trivial task to separate one from the others because different loss sources occur concurrently and they interact with each other in a machine. Consequently, designers tend to rely on various empirical correlations to get an approximate estimate of each aerodynamic loss contribution. In this study, a systematic loss audit of an uncooled turbine stage has been undertaken by conducting a series of numerical experiments. By comparing entropy growth across the turbine stage, aerodynamic losses are broken down within the stator, rotor, and interblade row gap. Furthermore, losses across each blade row are broken down into profile, leakage, endwall, and trailing edge losses. The effect of unsteady interaction due to the relative motion of the stator and the rotor was also identified. For the examined turbine stage, trailing edge losses of the rotor were dominated, contributing to more than a third of the total aerodynamic loss. The profile loss across the stator and the rotor, unsteady loss between the stator and the rotor, and the stator endwall loss were also identified to be the significant loss sources for this turbine stage. The design implications of the findings are discussed.
- 20 January 2016
- Published by Wiley in Journal of Turbomachinery
- Vol. 138 (5) , 051004
Loss Audit of a Turbine Stage
In order to achieve high aerodynamic efficiency of a turbine stage, it is crucial to identify the source of aerodynamic losses and understand the associated loss generation mechanisms. This helps a turbine designer to maximize the performance of the turbine stage. It is well known that aerodynamic losses include profile, endwall, cooling/mixing loss, leakage, and trailing edge loss components. However, it is not a trivial task to separate one from the others because different loss sources occur concurrently and they interact with each other in a machine. Consequently, designers tend to rely on various empirical correlations to get an approximate estimate of each aerodynamic loss contribution. In this study, a systematic loss audit of an uncooled turbine stage has been undertaken by conducting a series of numerical experiments. By comparing entropy growth across the turbine stage, aerodynamic losses are broken down within the stator, rotor, and interblade row gap. Furthermore, losses across each blade row are broken down into profile, leakage, endwall, and trailing edge losses. The effect of unsteady interaction due to the relative motion of the stator and the rotor was also identified. For the examined turbine stage, trailing edge losses of the rotor were dominated, contributing to more than a third of the total aerodynamic loss. The profile loss across the stator and the rotor, unsteady loss between the stator and the rotor, and the stator endwall loss were also identified to be the significant loss sources for this turbine stage. The design implications of the findings are discussed.
- 1 September 2015
- Published by Wiley in Journal of Turbomachinery
- Vol. 137 (9) , 091001
Effect of the Stator Hub Configuration and Stage Design Parameters on Aerodynamic Loss in Axial Compressors
The choice of the stator hub configuration (i.e., cantilevered versus shrouded) is an important design decision in the preliminary design stage of an axial compressor. Therefore, it is important to understand the effect of the stator hub configuration on the aerodynamic performance. In particular, the stator hub configuration fundamentally affects the leakage flow across the stator. The effect of the stator hub configuration on the leakage flow and its consequent aerodynamic mixing loss with the main flow within the stator row is systematically investigated in this study. In the first part of the paper, a simple model is formulated to estimate the leakage loss across the stator hub as a function of fundamental stage design parameters, such as the flow coefficient, the degree of reaction, and the work coefficient, in combination with some relevant geometric parameters including the clearance/span, the pitch-to-chord ratio, and the number of seals for the shrouded geometry. The model is exercised in order to understand the effect of each of these design parameters on the leakage loss. It is found that, for a given flow coefficient and work coefficient, the leakage loss across the stator is substantially influenced by the degree of reaction. When a cantilevered stator is compared with a shrouded stator with a single seal at the same clearance, it is shown that a shrouded configuration is generally favored as a higher degree of reaction is selected, whereas a cantilevered configuration is desirable for a lower degree of reaction. Further to this, it is demonstrated that, for shrouded stators, an additional aerodynamic benefit can be achieved by using multiple seals. The second part of the paper investigates the effect of the rotating surfaces. Traditionally, only the pressure loss has been considered for stators. However, the current advanced computational fluid dynamics (CFD) generally includes the leakage path with associated rotating surfaces, which impart energy to the flow. It is shown that the conventional loss coefficient, based on considering only the pressure loss, is misleading when hub leakage flows are modeled in detail, because there is energy addition due to the rotation of the hub or the shroud seals for the cantilevered stator and the shrouded stator, respectively. The calculation of the entropy generation across the stator is a better measure of relative performance when comparing two different stator hub configurations with detailed CFD.
- 1 September 2015
- Published by Wiley in Journal of Turbomachinery
- Vol. 137 (9) , 091001
Effect of the Stator Hub Configuration and Stage Design Parameters on Aerodynamic Loss in Axial Compressors
The choice of the stator hub configuration (i.e., cantilevered versus shrouded) is an important design decision in the preliminary design stage of an axial compressor. Therefore, it is important to understand the effect of the stator hub configuration on the aerodynamic performance. In particular, the stator hub configuration fundamentally affects the leakage flow across the stator. The effect of the stator hub configuration on the leakage flow and its consequent aerodynamic mixing loss with the main flow within the stator row is systematically investigated in this study. In the first part of the paper, a simple model is formulated to estimate the leakage loss across the stator hub as a function of fundamental stage design parameters, such as the flow coefficient, the degree of reaction, and the work coefficient, in combination with some relevant geometric parameters including the clearance/span, the pitch-to-chord ratio, and the number of seals for the shrouded geometry. The model is exercised in order to understand the effect of each of these design parameters on the leakage loss. It is found that, for a given flow coefficient and work coefficient, the leakage loss across the stator is substantially influenced by the degree of reaction. When a cantilevered stator is compared with a shrouded stator with a single seal at the same clearance, it is shown that a shrouded configuration is generally favored as a higher degree of reaction is selected, whereas a cantilevered configuration is desirable for a lower degree of reaction. Further to this, it is demonstrated that, for shrouded stators, an additional aerodynamic benefit can be achieved by using multiple seals. The second part of the paper investigates the effect of the rotating surfaces. Traditionally, only the pressure loss has been considered for stators. However, the current advanced computational fluid dynamics (CFD) generally includes the leakage path with associated rotating surfaces, which impart energy to the flow. It is shown that the conventional loss coefficient, based on considering only the pressure loss, is misleading when hub leakage flows are modeled in detail, because there is energy addition due to the rotation of the hub or the shroud seals for the cantilevered stator and the shrouded stator, respectively. The calculation of the entropy generation across the stator is a better measure of relative performance when comparing two different stator hub configurations with detailed CFD.