Xinman Tu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xinman Tu has a total of 114 co-authors. Here are the top co-authors by number of shared publications:
Xinding Lv
Key Laboratory of Jiangxi Province for Persistent Pollutants Prevention Control and Resource Reuse, College of Environmental and Chemical Engineering, Nanchang Hangkong University, Nanchang, People’s Republic of China
7 shared publicationsLi Zhang
Key Laboratory of Jiangxi Province for Persistent Pollutants Prevention Control and Resource Reuse, College of Environmental and Chemical Engineering, Nanchang Hangkong University, Nanchang, People’s Republic of China
6 shared publicationsJianping Zou
Key Laboratory of Jiangxi Province for Persistent Pollutants Controls and Resources Recycle, Nanchang Hangkong University, Nanchang, 330063, China
3 shared publicationsTingting Li
Key Laboratory of Jiangxi Province for Persistent Pollutants Control and Resources Recycle
3 shared publicationsJian Chen
Key Laboratory of Jiangxi Province for Persistent Pollutants control and Resources Recycle, College of Environmental and Chemical Engineering, Nanchang Hangkong University, Nanchang, China
2 shared publicationsJingwen Li
Key Laboratory of Jiangxi Province for Persistent Pollutants Control and Resources Recycle
2 shared publications
Latest Publications
- 18 September 2026
- Published by Springer Nature in Microchimica Acta
- Vol. 193 (10) , 686
A novel carbon black-integrated cage-structured NiCo2O4 nanocomposite for the selective and sensitive electrochemical determination of vanillin
- 18 September 2026
- Published by Springer Nature in Microchimica Acta
- Vol. 193 (10) , 686
A novel carbon black-integrated cage-structured NiCo2O4 nanocomposite for the selective and sensitive electrochemical determination of vanillin
- 25 June 2026
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 59 (25) , 255304
Intra-ring N–N bond stabilizes a buckled C 5 N 8 monolayer with a near-zero poisson’s ratio for photocatalytic overall water splitting
Non-planar structural architectures in two-dimensional carbon nitrides remain under study because of their structural diversity and tunable properties. Using density functional theory with both Perdew–Burke–Ernzerhof and HSE06 functionals, we predict a buckled C 5 N 8 monolayer stabilized by an intrinsic intra-ring N–N bond. This bonding mode induces out-of-plane buckling and mechanical anisotropy, including direction-dependent stiffness and a near-zero Poisson’s ratio. The nonplanar geometry also induces charge polarization and an internal electric field, which is consistent with carrier separation. Electronic-structure calculations reveal that C 5 N 8 is a quasi-direct wide-band-gap semiconductor with E g = 2 .98 eV; the Fermi level lies 0.24 eV above the valence-band maximum and the work function is Φ = 5 .02 eV. Furthermore, the ultraviolet absorption coefficient exceeds. 10 5 c m − 1 The band edges align with the thermodynamic requirements for overall water splitting, and the spectroscopic limited maximum efficiency is 8.64% at an absorber thickness of L sat ≈ 1 .64 μ m . Our findings show that intra-ring N–N bonding tunes the mechanical and optoelectronic properties of metal-free carbon nitride monolayers for applications in UV optoelectronics and overall water splitting.
- 25 June 2026
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 59 (25) , 255304
Intra-ring N–N bond stabilizes a buckled C 5 N 8 monolayer with a near-zero poisson’s ratio for photocatalytic overall water splitting
Non-planar structural architectures in two-dimensional carbon nitrides remain under study because of their structural diversity and tunable properties. Using density functional theory with both Perdew–Burke–Ernzerhof and HSE06 functionals, we predict a buckled C 5 N 8 monolayer stabilized by an intrinsic intra-ring N–N bond. This bonding mode induces out-of-plane buckling and mechanical anisotropy, including direction-dependent stiffness and a near-zero Poisson’s ratio. The nonplanar geometry also induces charge polarization and an internal electric field, which is consistent with carrier separation. Electronic-structure calculations reveal that C 5 N 8 is a quasi-direct wide-band-gap semiconductor with E g = 2 .98 eV; the Fermi level lies 0.24 eV above the valence-band maximum and the work function is Φ = 5 .02 eV. Furthermore, the ultraviolet absorption coefficient exceeds. 10 5 c m − 1 The band edges align with the thermodynamic requirements for overall water splitting, and the spectroscopic limited maximum efficiency is 8.64% at an absorber thickness of L sat ≈ 1 .64 μ m . Our findings show that intra-ring N–N bonding tunes the mechanical and optoelectronic properties of metal-free carbon nitride monolayers for applications in UV optoelectronics and overall water splitting.
- 15 February 2026
- Published by Elsevier in Water Research
- Vol. 295, 125577
Unveiling the critical role of carbonate radicals: A CN/TGC heterojunction for enhanced photocatalytic degradation of sulfamethoxazole in carbonate-rich wastewater
- 15 February 2026
- Published by Elsevier in Water Research
- Vol. 295, 125577
Unveiling the critical role of carbonate radicals: A CN/TGC heterojunction for enhanced photocatalytic degradation of sulfamethoxazole in carbonate-rich wastewater
- 7 December 2025
- Published by Wiley in Electroanalysis
- Vol. 37 (12)
Heterojunction of CuS/MnS Employed with Multiwalled Carbon Nanotubes in Molecularly Imprinted Sensor for Selective and Sensitive Determination of Trichlorfon Residual
The abuse of trichlorfon leading a threat to human health through the food chain, it is great important to establish a selective and sensitive determination method for trichlorfon residual. Herein, a functional molecularly imprinted electrochemical sensor was constructed using CuS/MnS heterojunction and multiwalled carbon nanotubes (MWCNTs). CuS/MnS possesses a highly efficient electron transfer capacity via ion exchange interactions at a given potential, resulting in a favorable signal response. Meanwhile, the signal transmitting efficiency was further promoted by the large specific surface area of MWCNTs. In the preparation of electrochemical sensor, the CuS/MnS was modified on the electrode surface with MWCNTs, and covered by molecularly imprinted layer. The sensor was first incubated into an indicator solution containing potassium ferricyanide, producing a distinct initial signal. Once the target was present, it was identified and captured by the imprinted cavity, which blocked the electron pathway, and the potassium ferricyanide signal subsequently reduced with a measurable level. Under the optimized conditions, the two‐stage linear ranges were 1.0–10 and 10–100 nM, with a detection limit of 0.37 nM. In contrast to other complex electrochemical beacons, this work induced heterojunctions and MWCNTs to obtain a satisfactory result via synergistic effect. Furthermore, the recovery rates of 93.70%–105.18% in the real sample assays suggest a prospective application of the proposed sensor in monitoring of pesticide residuals.
- 7 December 2025
- Published by Wiley in Electroanalysis
- Vol. 37 (12)
Heterojunction of CuS/MnS Employed with Multiwalled Carbon Nanotubes in Molecularly Imprinted Sensor for Selective and Sensitive Determination of Trichlorfon Residual
The abuse of trichlorfon leading a threat to human health through the food chain, it is great important to establish a selective and sensitive determination method for trichlorfon residual. Herein, a functional molecularly imprinted electrochemical sensor was constructed using CuS/MnS heterojunction and multiwalled carbon nanotubes (MWCNTs). CuS/MnS possesses a highly efficient electron transfer capacity via ion exchange interactions at a given potential, resulting in a favorable signal response. Meanwhile, the signal transmitting efficiency was further promoted by the large specific surface area of MWCNTs. In the preparation of electrochemical sensor, the CuS/MnS was modified on the electrode surface with MWCNTs, and covered by molecularly imprinted layer. The sensor was first incubated into an indicator solution containing potassium ferricyanide, producing a distinct initial signal. Once the target was present, it was identified and captured by the imprinted cavity, which blocked the electron pathway, and the potassium ferricyanide signal subsequently reduced with a measurable level. Under the optimized conditions, the two‐stage linear ranges were 1.0–10 and 10–100 nM, with a detection limit of 0.37 nM. In contrast to other complex electrochemical beacons, this work induced heterojunctions and MWCNTs to obtain a satisfactory result via synergistic effect. Furthermore, the recovery rates of 93.70%–105.18% in the real sample assays suggest a prospective application of the proposed sensor in monitoring of pesticide residuals.
- 30 October 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (44) , 29944-29955
2D ZnIn 2 S 4 -Intercalated ZnTi-LDH to Construct a 2D/2D Type-II Heterojunction for Boosting Photocatalytic Activities and Antiphotocorrosion
Exploration of high-performance photocatalysts is crucial for photocatalytic antibiotic degradation. Herein, the 2D ZnTi layered double hydroxide intercalated with 2D ZnIn2S4 nanosheets (denoted as ZnTi-ZIS-ZnTi) is synthesized by utilizing the ion exchange and intercalation strategies. Experimental results demonstrate that the 2D/2D ZnTi-ZIS-ZnTi heterostructure exhibits excellent photocatalytic degradation activity for tetracycline, achieving a degradation rate of 94.68% within 60 min of visible light irradiation, as well as unexpected recyclability after eight consecutive cycles under different water quality conditions. Mechanism investigation demonstrates that two main active species (h+ and 1O2) are involved in TC degradation. The outstanding photocatalytic performance can be attributed to the formation of Type-II heterojunction with intimate contact, which is achieved through the intercalation strategy. Specifically, the intercalation strategy results in a multilamellar hierarchical morphology, enhances the separation efficiency of photogenerated carriers, promotes electron transport, and provides plenty of active sites for the photocatalytic process. This work identifies a promising photocatalyst system for water purification.
- 30 October 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (44) , 29944-29955
2D ZnIn 2 S 4 -Intercalated ZnTi-LDH to Construct a 2D/2D Type-II Heterojunction for Boosting Photocatalytic Activities and Antiphotocorrosion
Exploration of high-performance photocatalysts is crucial for photocatalytic antibiotic degradation. Herein, the 2D ZnTi layered double hydroxide intercalated with 2D ZnIn2S4 nanosheets (denoted as ZnTi-ZIS-ZnTi) is synthesized by utilizing the ion exchange and intercalation strategies. Experimental results demonstrate that the 2D/2D ZnTi-ZIS-ZnTi heterostructure exhibits excellent photocatalytic degradation activity for tetracycline, achieving a degradation rate of 94.68% within 60 min of visible light irradiation, as well as unexpected recyclability after eight consecutive cycles under different water quality conditions. Mechanism investigation demonstrates that two main active species (h+ and 1O2) are involved in TC degradation. The outstanding photocatalytic performance can be attributed to the formation of Type-II heterojunction with intimate contact, which is achieved through the intercalation strategy. Specifically, the intercalation strategy results in a multilamellar hierarchical morphology, enhances the separation efficiency of photogenerated carriers, promotes electron transport, and provides plenty of active sites for the photocatalytic process. This work identifies a promising photocatalyst system for water purification.
- 30 January 2025
- Published by Elsevier in Chemical Engineering Journal
- Vol. 506
An innovative dual-mode catalytic strategy for Boosting the Mineralization of organic pollutants through Dark-Light Cycle-Mediated Alternative Transformation pathways with NC/C3N4 in persulfate-based advanced oxidation process
- 30 January 2025
- Published by Elsevier in Chemical Engineering Journal
- Vol. 506
An innovative dual-mode catalytic strategy for Boosting the Mineralization of organic pollutants through Dark-Light Cycle-Mediated Alternative Transformation pathways with NC/C3N4 in persulfate-based advanced oxidation process
- Open Access
Detection of Nanopores with the Scanning Ion Conductance Microscopy: A Simulation Study
During the dielectric breakdown process of thin solid-state nanopores, the application of high voltages may cause the formation of multi-nanopores on one chip, which number and sizes are important for their applications. Here, simulations were conducted to mimic the investigation of in situ nanopore detection with scanning ion conductance microscopy (SICM). Results show that SICM can provide accurate nanopore location and relative pore size. Detection resolution is influenced by the dimensions of the applied probe and separation between the probe and membranes, which can be enhanced under large voltages or a concentration gradient.
Open AccessDetection of Nanopores with the Scanning Ion Conductance Microscopy: A Simulation Study
During the dielectric breakdown process of thin solid-state nanopores, the application of high voltages may cause the formation of multi-nanopores on one chip, which number and sizes are important for their applications. Here, simulations were conducted to mimic the investigation of in situ nanopore detection with scanning ion conductance microscopy (SICM). Results show that SICM can provide accurate nanopore location and relative pore size. Detection resolution is influenced by the dimensions of the applied probe and separation between the probe and membranes, which can be enhanced under large voltages or a concentration gradient.
- 21 July 2024
- Published by Elsevier in Materials Letters
- Vol. 372
Tellurium@nitrogen-doped hierarchical porous carbon nanofibers for potassium-ion storage
- 21 July 2024
- Published by Elsevier in Materials Letters
- Vol. 372
Tellurium@nitrogen-doped hierarchical porous carbon nanofibers for potassium-ion storage