CWChao Wang

Chao Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Chao Wang has a total of 34 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Hybrid Dry and Wet Etching of LiNbO3 Domain-Wall Memory Devices with 90° Etching Angles and Excellent Electrical Properties

    by Bowen Shen, Xiaojun Tan, Chao Wang, Haochen Fan, Di Hu, Jie Sun, Jun Jiang, Anquan Jiang

    Ferroelectric domain walls, agile nanoscale interfaces of polar order, can be selectively controlled by electric fields for their position, conformation, and function, which is ultimately the key to realizing novel low-energy memory and computing structures. LiNbO3 single-crystal domain wall memory has the advantages of high operational speed, high integration density, and virtually unlimited endurance cycles, appearing as a good solution for the next generation of highly miniaturized low-energy memories. However, the etching process poses significant challenges in the nanofabrication and high-density integration of LiNbO3 domain-wall memories. Here, we employed a hybrid etching technique to achieve smooth sidewalls with a 90° inclined angle, leading to a 24% reduction in the coercive field and a 2.5-fold increase in the linear domain wall current density with a retention time of more than 106 seconds and endurance of over 105 writing cycles. Combined with the results of X-ray diffraction patterns and X-ray photoelectric spectra, it is concluded that the excellent electrical performance is related to the formation of an oxygen-deficient LiNbO3-x layer on the sidewall surface during the wet chemical etching process, which is a conductive layer that reduces the thickness of the "dead" layer between the side electrodes and the LiNbO3 cell and rectifies the diode-like wall currents with an onset voltage reduced from 1.23 to 0.28 V. These results prove the high-density integration of ferroelectric domain-wall memories at the nanoscale and provide a new strategy applicable to the development of LiNbO3 photonic devices.


  • Fast Operations of Nonvolatile Ferroelectric Domain Wall Memory with Inhibited Space Charge Injection

    by Wen Jie Zhang, Chao Wang, Jun Jiang, An Quang Jiang

    The microampere-level domain wall currents in LiNbO3 single crystals have promising applications in nonvolatile ferroelectric domain wall random access memory and logic with high-density integration, ultrafast operation speeds, and almost unlimited switching cycles. For the memory commercialization, the improvements of the reliability and operation speed of the devices are challenging due to the high-field charge injection. The injected charge could compensate the domain-wall boundary charge that screens the domain switching field and reduces the domain wall current. In this work, two kinds of memory nanocells were fabricated on the surfaces of X-cut LiNbO3 single crystals to study the geometry-dependent charge injection. The striped memory cell due to the appearance of the size-driven reconstruction has a smaller coercive field than that of a clamped memory cell without relaxation of the lattice matching stress, which reduces low-frequency charge injection and increases the domain switching speed. At an operating voltage of 5 V, we observed a retention time of more than 1 week and an on/off current ratio of 2 × 104 for a striped-like cell, paving the route to integrate energy-efficient high-density domain wall memory in high reliability.


  • Understanding and modulation of resistive switching behaviors in PbZr0.52Ti0.48O3/La0.67Sr0.33MnO3/Nb:SrTiO3 multilayer junctions

    by Hang Yu Zheng, Yu Bai, Yan Shao, Hai Yi Yu, Bing Chen, Jun Liang Lin, Fan Zhang, Chao Wang, Zhan Jie Wang


  • In-Plane Ferroelectric Domain Wall Memory with Embedded Electrodes on LiNbO3 Thin Films

    by Meng Han Ao, Si Zheng Zheng, Qi Lan Zhong, Wen Di Zhang, Xu Hou, Xiao Jie Chai, Chao Wang, Hao Chen Fan, Jian Wei Lian, Yan Cheng, et al.

    With the formation of mesa-like cells at their surfaces, LiNbO3 thin films are useful for integrating high-density domain wall memory. However, the material is too hard and inert to etch the cells with inclined side edges that help to diminish polarization retention. Moreover, etching could damage the ferroelectricity of the film. To overcome these drawbacks in forming memory cells directly, we developed a technique to deposit two gapped electrodes in the film surface, without needing to etch the film. While applying an in-plane write voltage above a coercive voltage, the domain within the gap is reversibly switched along with the creation/erasure of conducting domain walls against the peripheral unswitched domain. This technique enables “on”/“off” current read of the written information. Unfortunately, the switched domain within the gap generally has poor retention and a weak wall current arises from the presence of a strong depolarization field. To overcome this problem, we fabricated a type of embedded electrode that diffuses thickness-wise into the LiNbO3 thin film to form a parallel-plate-like structure to screen the depolarization field. The switched domains now had good retention and carry large wall currents. Alternatively, without the embedded electrodes, the switched domains within the cells can be stabilized with increasing gap distance above a critical length of 320 nm. The two methods foreshadow the possibility in the future to fabricate damage-free LiNbO3 memory cells without etching.


  • Size-Controlled Polarization Retention and Wall Current in Lithium Niobate Single-Crystal Memories

    by Xiaobing Hu, Xu Hou, Yan Zhang, Xiaojie Chai, Jianwei Lian, Chao Wang, Jie Wang, Jun Jiang, Anquan Jiang

    Highly conductive domain walls in insulating ferroelectric LiNbO3 (LNO) single-crystal thin films with atomic smoothness are attractive for use in high-density integration of the ferroelectric domain wall random access memory (DWRAM) because of their excellent reliability and high read currents. However, downscaling of the memory size to the nanoscale could cause poor polarization retention. Understanding the size-dependent electrical performance of a memory cell is therefore crucial. In this work, highly insulating X-cut LNO thin films were bonded to SiO2/Si wafers and lateral mesa-like cells were fabricated on the film surfaces, where contact occurred with two-sided electrodes along the polar z-axis. Under application of an in-plane electric field above a coercive field (Ec), the domain within each memory cell was switched to be antiparallel to the unswitched referencing domain at the bottom; this resulted in the formation of a conducting domain wall, which enables the nondestructive readout strategy of the DWRAM. The cell, which has a lateral length (l) above a critical size (l0) of 105 nm, is found to be a mixture of two phases across the cell area. The inner area of the cell suffers from poor polarization retention because Ec = 150 kV/cm, as demonstrated by in-plane piezoresponse force microscopy imaging. In comparison, the outer periphery domains, which have lengths of 70 nm (∼l0/2), show good retention but require a much higher Ec of 785 kV/cm. The relevant physics is discussed as phase reconstruction occurs after release of the in-plane compressive strain near the outer regions; the results show good agreement with those of one-dimensional thermodynamic calculations and phase-field simulations. The measured current–voltage curves demonstrated a sudden enhancement of the wall current across the cell when l < l0, thus implying higher readout wall currents and better retention for the DWRAM at higher storage densities.


  • Energy-Efficient Ferroelectric Domain Wall Memory with Controlled Domain Switching Dynamics

    by Chao Wang, Jun Jiang, Xiaojie Chai, Jianwei Lian, Xiaobing Hu, An Quan Jiang

    High readout domain-wall currents in LiNbO3 single-crystal nanodevices are attractive to the application in a ferroelectric domain wall random access memory (DWRAM) to drive a fast memory circuit. However, the wall current at a small read voltage would increase nonlinearly at a much higher write voltage, which could arouse high energy consumption. Here we resolved this problem by controlling the two-step domain forward growth within a ferroelectric mesa-like cell that was formed at the surface of an X-cut LiNbO3 single crystal. The mesa-like cell contacts two side Pt/Ni electrodes that extend over the cell surface by 90nm for the generation of an in-plane inhomogeneous electric field. The domain forward growth processes at first in formation of an inclined charged 180° domain to span the in-plane electrode gap under a write voltage of 5 V in a large readout wall current, and then the domain expands fully throughout the entire cell in formation of a neutral 180° wall to reduce the wall current by 10 times at a higher write voltage of 6 V. Meantime, the domain below the mesa-like cell in an opposite orientation is unchanged to serve as the reference. A higher wall current at a lower read voltage and a lower wall current at a higher write voltage can satisfy both requirements of low energy consumption and fast operation speeds for the DWRAM