RMRoger L. McMullen

Roger L. McMullen

*This is an algorithmically generated author record based on publicly available information.

Roger L. McMullen has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Electrokinetic analysis reveals common conditioner ingredient interactions with human hair

    by Huijun Phoebe Tham, Kah Yuen Yip, Thomas Luxbacher, Roger L. McMullen, Thomas L. Dawson

    Objective: This study aims to use electrokinetic analysis to investigate the deposition behaviour and conditioning efficacy of cationic surfactants on human hair, focusing on how surfactant structure, concentration and hair damage influence performance. It also aims to understand the mechanisms governing surfactant adsorption and their impact on hair manageability and health. Methods: This research employed streaming potential measurements—including pH‐dependent, time‐dependent and concentration‐dependent zeta (ζ)‐potential studies—alongside wet combing analyses and ATR‐FTIR spectroscopy to evaluate the adsorption affinity and conditioning effects of four cationic surfactants: behentrimonium chloride (BTMC), behentrimonium methosulfate (BTMS), hexadecyltrimethylammonium chloride (CTAC) and stearylalkonium chloride (STAC). A simplified model surface using silicon oxide (Si | SiO 2 ) wafers was also utilized to isolate the influence of hair's natural variability and fibrous structure. Results: Longer‐chain surfactants like BTMC showed superior deposition and conditioning due to stronger van der Waals interactions, while bulky groups in STAC hindered deposition. BTMC outperformed BTMS, likely due to the chloride counterion's higher mobility. BTMC and BTMS were superior against CTAC and STAC due to their longer carbon chain length. Wet combing analyses revealed that BTMC significantly reduced combing forces, improving manageability, whereas STAC fared the worst due to its low adsorption. However, ATR‐FTIR analysis indicated no reversal of oxidative damage, suggesting conditioners improve manageability without repairing structural damage. Conclusion: The study highlights the importance of surfactant molecular structure—such as carbon chain length and counterion type—in deposition efficiency and conditioning performance, providing valuable insights for developing more effective hair care formulations. By leveraging electrokinetic analyses in the form of streaming potential experiments, we were able to quantitatively assess adsorption behaviour, ζ‐potential changes and the dynamic interactions between surfactants and hair. These findings enhance the understanding of cationic surfactant‐hair interactions, offering practical implications for optimizing conditioners to improve user experience and hair health.


  • Open Access

    The benefits and challenges of treating skin with natural oils

    by Roger L. McMullen

    The term natural oil refers to a fixed (non‐volatile) oil of animal or plant origin. These types of oils – in contrast to essential (volatile) oils, which are obtained by steam distillation methods of plant matter – are typically obtained from plant seeds and nuts by a mechanical pressing technique or solvent extraction. The natural movement in cosmetics of the 21st century has led to renewed interest in formulating skin care products with botanical ingredients. In this article, we discuss the benefits and caveats of natural oil treatments as moisturizing agents (as occlusives and emollients) as well as their utility in wound healing and treatment of skin diseases. We also address the paradoxical behaviour of natural oils in relation to barrier function and highlight the current state of our knowledge with respect to the use of natural oils in neonatal skin care. Finally, we provide a comparison of natural oils to conventional petroleum‐based oils.


  • Open Access

    Thermophilic Composting as a Means to Evaluate the Biodegradability of Polymers Used in Cosmetic Formulations

    by Timothy W. Gillece, Helen K. Gerardi, Roger L. McMullen, William T. Thompson, Daniel H. Brown

    In the last decade, a growing demand for sustainable cosmetic ingredients has yielded numerous biodegradation protocols. While OECD (Organization for Economic Co-operation and Development) aquatic assays are suitable for water-borne chemicals, it is crucial for the personal care industry to consider the persistence of plastics in soil, compost, and municipal sludge. Adopting this cradle-to-grave holistic approach would strengthen product appeal while increasing the accuracy and ethical integrity of green product labeling. The aim of our study was to employ quantitative CO2 detection and thermophilic composting protocols specified in ASTM D5338, along with pass level criteria outlined in ASTM D6400, to assess the mineralization of plastics commonly formulated into personal care products. Our results indicate that many cellulose ethers, cationic guars, starches, proteins, and labile polyesters demonstrate satisfactory disintegration, biodegradation, and seed germination rates to secure an ASTM D6400 compostability claim. By contrast, macromolecules designed with carbon–carbon backbones resisted acceptable mineralization in composting experiments, advocating that unadulterated municipal compost lacks the microbial diversity to enzymatically digest many synthetically derived resins. Additionally, polymers that demonstrated acceptable biodegradability in internal and published OECD aquatic studies, including chitosan and polyvinyl alcohol, exhibited limited respiration in local municipal compost; hence, untested correlations between aquatic, soil, and compost testing outcomes should never be assumed.


  • Open Access

    Thermophilic Composting as a Means to Evaluate the Biodegradability of Polymers used in Cosmetic Formulations

    by Timothy W. Gillece, Helen K. Gerardi, Roger L. McMullen, William T. Thompson

    In the past decade, a growing demand for sustainable cosmetic ingredients has yielded numerous biodegradation protocols. While OECD (Organization for Economic Co-operation and Development) aquatic assays are suitable for water-borne chemicals, it is crucial for the personal care industry to consider the persistence of plastics in soil, compost, and municipal sludge. Adopting this cradle-to-grave holistic approach would strengthen product appeal, while increasing the accuracy and ethical integrity of green-product labeling. Our study employs quantitative CO2 detection and thermophilic composting protocols specified in ASTM D5338, along with pass level criteria outlined in ASTM D6400, to assess the mineralization of plastics commonly formulated into personal care products. The results indicate that many cellulose ethers, cationic guars, starches, and labile polyesters demonstrate satisfactory disintegration, biodegradation, and seed germination rates to secure an ASTM D6400 compostability claim. In contrast, macromolecules designed with carbon-carbon backbones resisted acceptable mineralization in composting experiments, suggesting that unadulterated municipal compost lacks the microbial diversity to enzymatically digest many synthetically derived resins. Additionally, polymers that demonstrated acceptable biodegradability in internal and published OECD aquatic studies—including chitosan and polyvinyl alcohol—exhibited limited fragmentation in local municipal compost; hence, untested correlations between aquatic, soil, and compost testing outcomes should never be assumed.


  • Top Cited Papers
    Open Access

    History of Natural Ingredients in Cosmetics

    by Roger L. McMullen, Giorgio Dell’acqua

    There has been interest in the history of cosmetics for the last several decades. In part, this renewed curiosity is probably due to the revolutionizing natural movement in the cosmetic industry. In this article, we provide an overview of the historical aspects of the use of natural ingredients in cosmetics, which mostly come from botanical and mineral sources. We begin with an introduction to the art and science of cosmetics in the ancient world, which includes accounts of Egyptian, Mesopotamian, Greek, and Roman cosmetics as well as Traditional Chinese Medicine and Ayurvedic Medicine. These dermatological and cosmetic practices, which were advanced for the time, paved the way for the current revolution of natural ingredients in cosmetic products. Without providing a comprehensive historical account, we surveyed selected cultures during different periods of time to provide some perspective of our current understanding of natural ingredients in cosmetics. Attention is also given to the rich contributions of body art by tribal societies to our knowledge base, especially in the areas of dyes and pigments. Finally, we offer some perspective of natural ingredient cosmetics in the Information Age.


  • Open Access

    Development of a three‐point cantilever bending technique to study the mechanical properties of hair styling ingredients

    by Roger L. McMullen, Tim Gillece

    Background: The mechanical properties of hair treated with styling ingredients is an important aspect to determine if products will be efficacious when used by the consumer. Measurement techniques have been proposed in earlier work; however, these are mostly aimed at hairspray systems and not the myriad of styling products available to the modern‐day consumer.Aim: In this article, experimental and data analysis guidelines are proposed for the evaluation of styling ingredients using a three‐point cantilever bending technique. Most of the experiments were carried out on polysaccharide‐based ingredients—guar hydroxypropyltrimonium chloride (Guar HPTC) and cassia hydroxypropyltrimonium chloride (Cassia HPTC)—to establish basic characterization concepts of the polymer‐fiber assemblies.Methods: A three‐point cantilever bending technique was developed using a texture analyzer housed in a temperature and humidity‐controlled chamber. Scanning electron microscopy (SEM) studies were conducted to monitor the fracture mechanics of polymer‐fiber assemblies.Results: Fundamental studies were carried out to determine the effect of concentration, molecular weight (MW), and chemistry of the polysaccharides on the calculated indices, which characterize the stiffness, flexibility, elasticity, and plasticity of the treated hair. Experiments were conducted in a controlled temperature and humidity environment, which allowed us to monitor the behavior of the polymer‐treated hair from 40–90% RH. Studies were also conducted on polymer blends and conventional styling polymers to provide guidance of the performance of naturally‐derived polymers to their synthetic counterparts.Conclusions: A detailed description is provided for a user‐friendly, quick method to measure the mechanical properties of styling ingredients on hair. We provide guidelines for three‐point cantilever bending tests of straight hair tresses treated with conventional and naturally‐derived styling polymers. Indices were developed to characterize the force‐distance curves and were designated as E1, F1, position of F1, post‐fracture gradient, toughness, E10/E1, and F10/F1. These indices provide an overall characterization of the stiffness, flexibility, elasticity, and plasticity of polymer‐treated hair.


  • Open Access

    Physicochemical Properties of Cellulose Ethers

    by Roger L. McMullen, Seher Ozkan, Timothy Gillece

    Cellulose ethers are naturally derived ingredients that are commonly used in personal care products as rheology modifiers, film formers, stabilizers, and sensorial agents. In this work, we investigated the physicochemical properties of various grades of hydroxyethylcellulose (HEC), hydroxypropylcellulose (HPC), hydroxypropylmethylcellulose (HPMC), methylcellulose (MC), and sodium carboxymethylcellulose (CMC). In addition, we also studied the influence of hydrophobic modification on the structure of HEC by carrying out experiments with cetyl hydroxyethylcellulose (HMHEC). Rheological, friction coefficient, dynamic vapor sorption (DVS), surface tension analysis, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA) data were generated for the cellulose ethers in order to obtain information about their viscosity, lubricity, moisture absorption, solubility in the bulk solution phase, physical properties, and thermal degradation profile, respectively.


  • Open Access

    Investigation of the interactions of cationic guar with human hair by electrokinetic analysis

    by Roger L. McMullen, Donna Laura, Guojin Zhang, Bert Kroon

    Objective: Cationic guar is an important polysaccharide used as a hair conditioning agent in personal care products. In this article, we report streaming potential data demonstrating its behaviour as it interacts electrostatically with hair. Several cationic guar variants with different molecular weights (MWs) and charge densities (CDs) were examined.Methods: All experiments were carried out with a custom‐designed streaming potential instrument so that in situ, real‐time data were monitored during the treatment of a hair plug with aqueous solutions of cationic guar and subsequent treatment with anionic surfactants—sodium laureth sulfate (SLES) and cocamidopropyl betaine (CAPB)—commonly found in contemporary shampoo formulations.Results: The MW of the cationic guar variants plays an integral role in determining the thickness of the adsorbed polymer layer on the hair surface while CD influences the zeta potential. Data were also generated for the treatment of hair with a cationic flexible polymer (polyquaternium‐28) and cationic conditioning surfactant (behentrimonium chloride) to provide a frame of reference. The deposition behaviour on hair of high MW cationic guar variants is distinct from these conventional molecules in terms of its electrokinetic properties. We also examined the electrokinetic behaviour of cationic guar on hair types from different racial backgrounds. While the cationic guar treatment yielded similar results for the different hair types, anionic surfactant treatment resulted in quicker sorption and desorption from African, European 65% grey, and Mulatto hair as compared to Chinese, European dark brown, and Indian hair.Conclusion: We introduce an in situ technique for measuring the dynamic sorption/desorption of charged molecules on the surface of human hair. Evaluation of a series of cationic guar species revealed varying behaviour depending on the MW and CD of the polysaccharide. Our data also demonstrate differences in the desorption properties of typical shampoo surfactants for hair from diverse racial backgrounds.


  • Open Access

    Evaluation of the surface properties of hair with acoustic emission analysis

    by Roger L. McMullen, Tyler Schiess, Lidia Kulcsar, Linda Foltis, Timothy Gillece

    Objective: The tactile sensation of hair is an important consumer‐perceivable attribute. There are limited instrumental options to measure the haptic properties of hair. In this study, we introduce a novel technique using the acoustic emissions produced when skin comes in contact with dry hair in a stroking motion.Methods: Using a free‐field microphone with a frequency response of 8–12,500 Hz, we recorded acoustic emission data of the interaction of skin with hair. Data were captured with Electroacoustics Toolbox software and analysed with Matlab. Acoustic emission profiles were generated allowing us to monitor the acoustic response at distinct frequencies.Results: Various experiments were conducted to develop this novel technique as a suitable measure to monitor the surface properties of hair. Increasing the normal force and velocity of the interaction led to an increase in acoustic emissions. We also examined the acoustic profile of hair that underwent chemical treatment. For example, bleached hair produced a much higher magnitude acoustic response than the corresponding virgin hair. On the other hand, hair conditioner systems mitigated the acoustic response. Finally, investigations of textured hair revealed that the three‐dimensional structure of the hair fibre assembly and its ability to return to its original state when perturbed produce the most dominant acoustic response for this type of hair.Conclusion: We introduce a cutting‐edge method to reproducibly evaluate the surface properties of hair. Different types of hair geometry produce unique acoustic profiles as do hair types that experience harsh damaging treatments. This is also a very practical and efficient way to evaluate the degree of protection or conditioning of the fibre.


  • Rheological fingerprinting as an effective tool to guide development of personal care formulations

    by Seher Ozkan, Coralie Alonso, Roger L. McMullen

    Objective Conventional rheological techniques in the linear viscoelastic region provide insights about the spatial configuration of the microstructural components of personal care formulations in their “at‐rest” state. However, they fail to describe the textural experience associated with large and fast deformations during daily consumer application. In this study we present a non‐conventional rheological technique—large amplitude oscillatory shear (LAOS)—for probing the transformation of a material during its application. This technique is proposed as a practical tool for formulators in their efforts to design products with desired textural attributes. Methods A non‐linear rheological technique termed LAOS was utilized to capture the textural expression perceived by consumers. Lissajous plots (stress vs. strain or strain rate) provide a fingerprint of the formula and are utilized to both analyze the thickening mechanism and monitor the influence of various parameters, such as the chemistry, molecular properties, colloidal parameters, and processing conditions. Results In this study we showcased several approaches for modifying the texture of personal care formulations and show the influence of various parameters on the characteristics of the Lissajous curves and their relation to sensorial perception. This fingerprinting technique shows that increasing the molecular weight or hydrophobic modification boosts the elasticity and thickening efficiency of a given polymer. Differences in the chemistry of rheological ingredients also influence the characteristic Lissajous fingerprint. In high concentration surfactant systems, which tend to form worm‐like micelles, their unique Lissajous fingerprints indicate structure rebuild due to fast kinetics at large but slow deformations. Analysis of lamellar gel‐based hair conditioner formulations demonstrate the unique high yield stress of these types of materials, accompanied by the fast breakdown transition from a solid to viscous structure due to their crystalline lamellar gel structure. Conclusion The LAOS technique presented in this article is intended to better capture the textural expression perceived by consumers. Lissajous plots—generated from the LAOS experimental data—provide a fingerprint of the tested formula and are utilized to both analyze the thickening mechanism and monitor the influence of various parameters, such as the chemistry and molecular weight of the thickener, pH of the formula medium, and influence of other ingredients in the formula (surfactants, emulsifiers, etc.).