Vanessa Moura Vasconcelos
Research Subjects
Vanessa Moura Vasconcelos has a total of 57 co-authors. Here are the top co-authors by number of shared publications:
- Marcos Roberto Vasconcelos Lanza
São Carlos Institute of Chemistry, University of São Paulo - USP, Avenida Trabalhador São Carlense 400, São Carlos, SP, 13566-590, Brazil
8 shared publications - Mauricio Ribeiro Baldan
National Space Research Institute, Avenida dos astronautas 1758, São José dos Campos 12227-010, SP, Brazil
5 shared publications - Neidenei Gomes Ferreira
Instituto Nacional de Pesquisas Espaciais
4 shared publications - Giancarlo Richard Salazar Banda
Graduate Program in Process Engineering (PEP), Tiradentes University, Aracaju 49010-390, SE, Brazil
3 shared publications - Carlos Ponce de Leon
University of Southampton
2 shared publications Fernanda Lanzoni Migliorini
2 shared publications
Latest Publications
- Open Access
- 1 January 2025
- Published by ALIES in Biomedical and Biopharmaceutical Research
- Vol. 22 (1) , 4-23
Enhancing the nutritional value of a sugar-free Greek-style yoghurt by incorporating strawberry-tree (Arbutus unedo L.) fruit and peach (Prunus persica)
As consumers become more health-conscious, they are increasingly seeking out foods that offer potential health benefits, such as yoghurts. To encourage more sustainable and healthy consumption habits, it is important to develop food products using local food ingredients. This study focused on fermented dairy products, namely by developing various formulations of Greek yoghurt using strawberry-tree fruit (Arbutus unedo L.) (STF) and peach (Prunus persica) puree, with no added sugar. Both peach and STF were sourced locally. A sensory analysis was performed to determine the preferred formulation, selecting either z1 (20% STF and 80% peach) or z2 (30% STF and 70% peach). After comparing the two, z1 emerged as the preferred formulation. For this formulation, physicochemical and microbiological analyses were conducted. A Greek yoghurt that incorporates peach and STF was developed while satisfying the requirements for “low-fat”, “low-saturated fat”, and “no added sugars” nutrition claims. These are all important features that align with the guidelines provided by the World Health Organization in promoting a healthy diet that encourages reduced fat and saturated fat intake, limited consumption of added sugars, and increased fibre content. To the best of our knowledge, this is the first time describing a Greek yoghurt containing STF purée.
- 1 January 2025
- Published by ALIES in Biomedical and Biopharmaceutical Research
- Vol. 22 (1) , 4-23
Open AccessEnhancing the nutritional value of a sugar-free Greek-style yoghurt by incorporating strawberry-tree (Arbutus unedo L.) fruit and peach (Prunus persica)
As consumers become more health-conscious, they are increasingly seeking out foods that offer potential health benefits, such as yoghurts. To encourage more sustainable and healthy consumption habits, it is important to develop food products using local food ingredients. This study focused on fermented dairy products, namely by developing various formulations of Greek yoghurt using strawberry-tree fruit (Arbutus unedo L.) (STF) and peach (Prunus persica) puree, with no added sugar. Both peach and STF were sourced locally. A sensory analysis was performed to determine the preferred formulation, selecting either z1 (20% STF and 80% peach) or z2 (30% STF and 70% peach). After comparing the two, z1 emerged as the preferred formulation. For this formulation, physicochemical and microbiological analyses were conducted. A Greek yoghurt that incorporates peach and STF was developed while satisfying the requirements for “low-fat”, “low-saturated fat”, and “no added sugars” nutrition claims. These are all important features that align with the guidelines provided by the World Health Organization in promoting a healthy diet that encourages reduced fat and saturated fat intake, limited consumption of added sugars, and increased fibre content. To the best of our knowledge, this is the first time describing a Greek yoghurt containing STF purée.
- 1 January 2022
- Published by Elsevier in Chemosphere
- Vol. 286 (Pt 1) , 131573
Recent advances on modified reticulated vitreous carbon for water and wastewater treatment – A mini-review
- 1 January 2022
- Published by Elsevier in Chemosphere
- Vol. 286 (Pt 1) , 131573
Recent advances on modified reticulated vitreous carbon for water and wastewater treatment – A mini-review
- 1 December 2020
- Published by Elsevier in Electrochimica Acta
- Vol. 364
Effects of temperature and heating method on the performance of Ti/Ru0.25Ir0.25Ti0.50O2 anodes applied toward Bisphenol S removal
- 1 December 2020
- Published by Elsevier in Electrochimica Acta
- Vol. 364
Effects of temperature and heating method on the performance of Ti/Ru0.25Ir0.25Ti0.50O2 anodes applied toward Bisphenol S removal
- 1 February 2020
- Published by Elsevier in Electrochimica Acta
- Vol. 332
New laser-based method for the synthesis of stable and active Ti/SnO2–Sb anodes
- 1 February 2020
- Published by Elsevier in Electrochimica Acta
- Vol. 332
New laser-based method for the synthesis of stable and active Ti/SnO2–Sb anodes
- 13 May 2019
- Published by Wiley in ChemElectroChem
- Vol. 6 (13) , 3516-3524
Electrochemical Degradation of Reactive Blue 19 Dye by Combining Boron‐Doped Diamond and Reticulated Vitreous Carbon Electrodes
Reactive Blue 19 (RB‐19) dye has a low fixation efficiency, a long half‐life and high toxicity. It is easily loss during the cleaning of textiles and can remain in the environment for a long time, causing serious environmental problems if not removed. This study reports the degradation of RB‐19 by: 1) direct electrochemical degradation with boron‐doped diamond (BDD) electrodes and 2) combined processes using BDD and reticulated vitreous carbon (RVC) electrodes that generate H2O2. The direct degradation uses different current densities and concentrations. High currents densities, longer electrolysis times and low volumetric flow rates favour RB‐19 degradation, removing total colour and 100 % TOC after 5 and 60 min, respectively. At a current density of 41 mA cm−2 and a volumetric flow rate of 20 dm3 h−1, the energy consumption to degrade 20 mg dm−3 of RB‐19 was 279 kWh kg−1. The TOC removal of RB‐19 dye combining BDD and RVC at a current density of 41 mA cm−2 was below 72 % after 90 min and the energy consumption increased to 612 kWh kg−1. The higher energy consumption observed during the combined process suggests that the direct degradation process at low volumetric flow rates is more efficient than the combined process.
- 13 May 2019
- Published by Wiley in ChemElectroChem
- Vol. 6 (13) , 3516-3524
Electrochemical Degradation of Reactive Blue 19 Dye by Combining Boron‐Doped Diamond and Reticulated Vitreous Carbon Electrodes
Reactive Blue 19 (RB‐19) dye has a low fixation efficiency, a long half‐life and high toxicity. It is easily loss during the cleaning of textiles and can remain in the environment for a long time, causing serious environmental problems if not removed. This study reports the degradation of RB‐19 by: 1) direct electrochemical degradation with boron‐doped diamond (BDD) electrodes and 2) combined processes using BDD and reticulated vitreous carbon (RVC) electrodes that generate H2O2. The direct degradation uses different current densities and concentrations. High currents densities, longer electrolysis times and low volumetric flow rates favour RB‐19 degradation, removing total colour and 100 % TOC after 5 and 60 min, respectively. At a current density of 41 mA cm−2 and a volumetric flow rate of 20 dm3 h−1, the energy consumption to degrade 20 mg dm−3 of RB‐19 was 279 kWh kg−1. The TOC removal of RB‐19 dye combining BDD and RVC at a current density of 41 mA cm−2 was below 72 % after 90 min and the energy consumption increased to 612 kWh kg−1. The higher energy consumption observed during the combined process suggests that the direct degradation process at low volumetric flow rates is more efficient than the combined process.
- Open Access
- 1 January 2018
- Published by Sociedade Brasileira de Quimica (SBQ) in Química Nova
- Vol. 41 (1) , 17-22
ELECTROCHEMICAL TREATMENT OF WASTEWATER FROM BIODIESEL PRODUCTION USING A DSA KIND ELECTRODE: Ti/IrO2-Nb2O5
- 1 January 2018
- Published by Sociedade Brasileira de Quimica (SBQ) in Química Nova
- Vol. 41 (1) , 17-22
Open AccessELECTROCHEMICAL TREATMENT OF WASTEWATER FROM BIODIESEL PRODUCTION USING A DSA KIND ELECTRODE: Ti/IrO2-Nb2O5
- 1 December 2016
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 4 (4) , 3900-3909
Electrochemical oxidation of RB-19 dye using a highly BDD/Ti: Proposed pathway and toxicity
- 1 December 2016
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 4 (4) , 3900-3909
Electrochemical oxidation of RB-19 dye using a highly BDD/Ti: Proposed pathway and toxicity
- Open Access
- 1 January 2016
- Published by GN1 Sistemas e Publicacoes Ltd. in Química Nova
ELECTROCHEMICAL OXIDATION OF REACTIVE BLACK 5 AND BLUE 19 DYES USING A NON COMMERCIAL BORON-DOPED DIAMOND ELECTRODE
We have studied the treatment of Reactive Black 5 (RP5) and Blue 19 (RA19), which are respectively azo and anthraquinone textile dyes, by electrochemical oxidation using a non commercial boron doped diamond electrode supported on titanium metallic with a relation between B and C equal to 15,000 ppm. Pt was used as counter electrode and Ag/AgCl(sat) was the reference electrode. The variables investigated to optimize the degradation were support electrolyte concentration (0.05, 0.1 and 0.2 mol L-1 of K2SO4), temperature (25, 35 and 45 ºC) and pH (2.5 and 10) by applying a current density of 75 mA cm-2. Total decolorization was observed in all electrochemical conditions studied. The highest rates of mineralization and chromatographic area removal were attained at high support electrolyte concentration due to the increase of conductivity, which caused more generation of hydroxyl radicals. RP5 was degraded at lower electrolysis time than RA19 with smaller requirement of electric charge. The mineralization rate increased in acid medium and at higher temperature since the increase in temperature favors the generation reactions of persulfate. These conditions led to the highest levels of current efficiencies and lower energy consumed
- 1 January 2016
- Published by GN1 Sistemas e Publicacoes Ltd. in Química Nova
Open AccessELECTROCHEMICAL OXIDATION OF REACTIVE BLACK 5 AND BLUE 19 DYES USING A NON COMMERCIAL BORON-DOPED DIAMOND ELECTRODE
We have studied the treatment of Reactive Black 5 (RP5) and Blue 19 (RA19), which are respectively azo and anthraquinone textile dyes, by electrochemical oxidation using a non commercial boron doped diamond electrode supported on titanium metallic with a relation between B and C equal to 15,000 ppm. Pt was used as counter electrode and Ag/AgCl(sat) was the reference electrode. The variables investigated to optimize the degradation were support electrolyte concentration (0.05, 0.1 and 0.2 mol L-1 of K2SO4), temperature (25, 35 and 45 ºC) and pH (2.5 and 10) by applying a current density of 75 mA cm-2. Total decolorization was observed in all electrochemical conditions studied. The highest rates of mineralization and chromatographic area removal were attained at high support electrolyte concentration due to the increase of conductivity, which caused more generation of hydroxyl radicals. RP5 was degraded at lower electrolysis time than RA19 with smaller requirement of electric charge. The mineralization rate increased in acid medium and at higher temperature since the increase in temperature favors the generation reactions of persulfate. These conditions led to the highest levels of current efficiencies and lower energy consumed