HZHaixiang Zhang

Haixiang Zhang

*This is an algorithmically generated author record based on publicly available information.

Haixiang Zhang has a total of 38 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Controlling Effect of Heterogeneity in High-Permeability Reservoirs on Waterflood Sweep Characteristics and Remaining-Oil Distribution

    by Deshuo Tao, Chunlei Yu, Lijie Liu, Xuan Lu, Dejun Wu, Haixiang Zhang

    High-permeability reservoirs at the extra-high water-cut stage commonly exhibit preferential flow, limited sweep expansion, and complex remaining-oil occurrence. To clarify the pore-scale mechanisms controlling waterflood sweep and remaining-oil retention, this study integrates CT-assisted core flooding and microfluidic chip visualization using a high-permeability sandstone core from the Guantao Formation in the Bohai Bay Basin. The CT-assisted core flooding experiment was used to quantify the stage-wise evolution of pores swept by the water phase, while the microfluidic experiment was used to visualize displacement pathways, local bypassing, and remaining-oil morphology under controlled pore-network conditions. The results show that waterflood sweep exhibits clear stage-wise evolution. During the low water-cut stage, injected water preferentially advances through large pore channels, resulting in limited sweep efficiency. With increasing water cut, pores newly swept by the water phase gradually shift from large pores to medium and small pores, accompanied by increasing displacement pressure. Under the present experimental conditions, the lower radius limit of pores newly swept by the water phase is approximately 7.54 μm, corresponding to a capillary force of about 0.9 MPa. When the injected volume exceeds approximately 2.5 PV, the sweep efficiency approaches a plateau and increases only from 0.72 to 0.75 at 5.0 PV, indicating that approximately 25% of the pore space remains difficult to be effectively swept. Image-based classification indicates that remaining oil can be divided into six occurrence types: clustered, porous, columnar, dead-end, film-like, and granular. Clustered and porous are the dominant occurrence types, accounting for a combined 59.7% of the total remaining oil. Pore-structure heterogeneity controls the microscopic sweep boundary through the combined effects of intra-unit structural dispersion and cross-unit structural contrast, which together regulate capillary resistance, seepage resistance, preferential flow, local bypassing, and remaining-oil retention. Microfluidic observations further show that permeability contrast and displacement velocity affect pore-scale displacement pathways and remaining-oil morphology. These findings provide experimental evidence for understanding the lower sweep-radius limit and remaining-oil occurrence mechanisms in high-permeability heterogeneous reservoirs at the extra-high water-cut stage, while the chip-scale velocity effects should be interpreted as pore-scale mechanistic evidence and require further validation before field-scale application.

  • Open Access

    From Exploration to Production: A Systematic Review of Natural Gas Hydrate Technologies

    by HongXu Wang, ZhanDong Li, HaiXiang Zhang, DianJu Wang, BiCheng Gan, ZhanXun Feng, ShuWen Guo

    As a strategic energy source with huge potential, the commercial development of natural gas hydrate (NGH) is a complex issue concerning the future energy landscape and maritime security. This article aims to systematically sort out the research progress of the entire chain from resource exploration to development and trial production in this field, and dialectically analyze the dual attributes of coexisting energy potential and engineering risks. This article systematically reviews the exploration technology system centered on geophysics, geochemistry, and drilling, as well as the evolution of resource evaluation methods. Furthermore, the support of basic research, such as the hydrate accumulation mechanism and simulation experiments for engineering practice, was explored. By analyzing global trial production cases, the advantages and disadvantages of different mining methods were compared, and core safety challenges, such as geological instability and methane leakage, were distilled. This article ultimately points out that the current development of NGH still faces technical challenges, and the future development will achieve a development system of “multi-technology-driven + multi-objective coordination + intelligent self-adaptation.” This article aims to provide a systematic reference framework for the scientific research and commercialization strategy of NGH.


  • Open Access

    Mechanism, Application, and Prospect of Fracturing-Flooding Technology: A Review

    by Haixiang Zhang, Meng Fan, Jiawei Wu, Xuanzuo An, YanQing Xu, Bicheng Gan, Shuwen Guo, Wenting Hu

    As a kind of reservoir development technology with great development potential, fracturing-flooding technology is more and more frequently used to solve the problems of poor reservoir physical properties, insufficient formation energy, and imperfect injection–production relationship faced by current oilfields. In this paper, the development status of this technology is discussed from the perspectives of the mechanism of action, the selection of working agent, the optimization of operating parameters, and the classification of fracturing-flooding technology. Combined with the practical application cases of oilfields, the development process and future research direction of fracturing-flooding are sorted out. The study found that the fracturing-flooding technology can achieve reservoir stimulation effect by supplementing formation energy, expanding swept volume, improving oil washing efficiency, and improving reservoir physical properties. Based on the actual characteristics of the reservoir, it is necessary to optimize and adjust the fracturing-flooding agents and their viscosity, injection volume, injection rate, soaking time, and other operating parameters. In recent years, new working agents, such as composite and viscoelastic working agents, have been gradually applied to the oil field. Fracturing-flooding technology is divided into two types: forward fracturing-flooding and reverse fracturing-flooding according to the different flow directions of fracture-making well end and working agent and crude oil. According to the current situation of reservoir development, the appropriate flooding-flooding method is selected to promote oil recovery. Based on the historical development and field applications of fracturing-flooding technology, this review also prospects its future directions, including multiphysics control factor analysis, composite technology integration, facility optimization, and intelligent development. These advances are expected to further enhance the technology and provide both theoretical and technical support for efficient reservoir development.


  • Open Access

    Study on the Structure–Activity Relationship and Oil Displacement Characteristics of the Polysurfactant Agent

    by Jingang He, Lin Yuan, Bicheng Gan, Zhiqiang Liu, Haixiang Zhang

    This study examines a versatile polymer known as polysurfactant, which is synthesized by co-polymerizing flexible acrylamide and sodium acrylate hydrocarbon chain. The polymer serves as a backbone and possesses active functional groups. Notably, the polysurfactant exhibits superior plugging and flooding abilities compared to conventional polymers. The primary objective of this paper is to investigate the properties and oil displacement characteristics of the polysurfactant through indoor physical simulation experiments. The results demonstrate that the multi-branched structure of the polysurfactant enhances its ability to associate, leading to the formation of a unique spatial network structure. The inclusion of multi-branched structures notably amplifies the association effect. The critical concentration for the association is estimated to be around 800 mg/L, at which juncture the polysurfactant exhibits a viscosity retention rate surpassing 90% subsequent to shearing. Furthermore, this spatial network structure exhibits self-recovery capabilities after experiencing shear failure and displaying strong viscosity and shear resistance. In addition, the concentration of the polysurfactant can control the hydrodynamic feature size, which shows its adaptability in regulation and oil-repelling functions at reservoir permeabilities ranging from 500 to 2000 × 10−3 μm2 with resistance coefficients ranging from 108 to 320. During the microscopic oil displacement process, the polysurfactant exerts a significant impact on mobility control, while the elastic pull clearly demonstrates a commendable viscoelastic oil displacement effect. The polysurfactant exhibits a specific degree of emulsification capability towards crude oil, leading to the emulsion exhibiting typical pseudoplastic fluid characteristics. The utilization of emulsification transportation and emulsification blockage contributes to the enhancement of oil recovery. As a result, the polysurfactant exhibits multifaceted capabilities, encompassing profile control, flooding, and plugging, owing to its unique structural characteristics. Through the implementation of a field test focused on flooding in the Daqing Oilfield, a significant enhancement in the recovery rate of 10.85% is observed, accompanied by a favorable input–output ratio of 1:3.86, thereby generating significant economic advantages.


  • Open Access

    Evaluation of the Performance of a Composite Water Control Process for Offshore Bottom Water Fractured Gas Reservoirs

    by Dianju Wang, Zhandong Li, Haixiang Zhang, Shufen Liu, Fahao Yu, Ji Li, Xingbin Liu, Yingjian Xiao, Yunshu Lv

    Natural gas, as one of the main energy sources of the modern clean energy system, is also an important raw material for the chemical industry, and the stable extraction of natural gas reservoirs is often affected by bottom water. It is difficult to control water in natural gas reservoirs, while fractured gas reservoirs are even more demanding. This is due to the complexity of the seepage laws of gas and water in fractures, resulting in the poor applicability of conventional processes for water control. Continuous research is needed to propose a process with effective control capabilities for bottom-water fractured gas reservoirs. Aiming at the above difficulties, this paper is based on a large-scale three-dimensional physical simulation device to carry out physical model design and simulation results testing and analysis. The water control ability of the combination of density-segmented sieve tubes and continuous packers in fractured gas reservoirs is explored. The physical simulation results show that the fracture distribution characteristics control the upward transportation path of bottom water. According to the segmentation characteristics of the fractures at the horizontal section location, optimizing the number of horizontal well screen tube segments and the density of boreholes reduces the cone-in velocity of bottom water before connecting the fractures to a certain extent. And the combined process has different degrees of water control ability for the three stages of bottom water transportation from the fractured gas reservoir to the production well. As the degree of water in the production well increases, the water control ability of the process gradually decreases. After the implementation of the water control process, the water-free gas production period was extended by about 6.84%, and the total production time was extended by about 6.46%. After the shutdown of the horizontal wells, the reduction in daily water production can still reach 21% compared to the natural extraction. The results of this research can provide process suggestions for water control in offshore fractured reservoirs and further ensure stable production in offshore fractured gas reservoirs.


  • Experimental study and recognition of natural gas hydrate chemical reagent - CO2 exploitation

    by Haixiang Zhang, Xin Lv, Li Li, Shufen Liu, Ji Li

    In order to solve the problems of slow replacement rate and low degree of substitution in the process of CO2 displacement by natural gas hydrate, a method of chemical reagent-CO2 displacement combined mining experiment was proposed. Taking the thermodynamic methanol inhibitor as an example, three groups of experiments were carried out: critical temperature pressure condition for CH4 decomposition at different methanol concentrations, CH4 hydrate decomposition under the condition of methanol reagent at 30% concentration, and methanol reagent-CO2 combined mining. Experiments show that: (1) The concentration of methanol plays a decisive role in hydrate recovery. Methanol reagent has the property of highly reducing the formation temperature of hydrate. Methanol solution concentration is positively correlated with the critical temperature drop of hydrate decomposition and formation pressure. (2) The methanol solution decomposition of hydrate can be roughly divided into three stages: the initial stage of rapid decomposition, the competitive stage of hydrate decomposition and stable transformation, and the stable stage of decomposition. Through experimental simulation, it is concluded that formation pressure is a direct factor affecting the decomposition ability of methanol reagent to hydrate. By changing formation pressure, the rate of CH4 hydrate recovery can be improved. (3) A higher hydrate decomposition rate can be obtained based on the methanol reagent-CO2 displacement mining method. In the action of the methanol reagent, the subsequent injection of CO2 still promotes the decomposition of CH4, that is, the displacement of CO2 hydrate after the decomposition of the hydrate based on the methanol reagent is feasible. The research results are of great significance especially for large-scale mine test mining of permafrost natural gas hydrate chemical reagent method.

  • Open Access

    Sand Production Prediction Model for Tight Sandstone Oil Reservoirs

    by Zhan-Dong Li, Hong Pang, Zhong Li, Hai-Xiang Zhang, Dian-Ju Wang, Ji Li

    Tight oil is an important unconventional resource, and sand production is an inevitable challenge during the field development. In this paper, based on data from the Daqing oilfield in Songliao Basin, the sand production of the tight sandstone oil reservoir is studied from the perspective of seepage and in situ stress distribution. Based on the combination of the formation fluid seepage law and the stress distribution around the well, a sand production prediction model is proposed to quantitatively estimate the sand production rate. The sand production prediction model is built based on the derivation of the sand production rate, which is well validated against the field data in the Daqing field with a relative error of 4.38.The following conclusions are drawn: (1) after the critical pressure difference is exceeded, the sand production rate is smaller with a higher flowing bottom-hole pressure; (2) a smaller sand production radius makes the formation more unstable and causes a more severe sand production; and (3) various sand production rates exhibit due to different permeabilities. A larger permeability results in a higher sand production rate. The findings of this study can help for sand production prediction in the tight sandstone oil reservoir.