EMEmilio Mendoza

Emilio Mendoza

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Emilio Mendoza has a total of 1000 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Evaluation of the alpha, beta and gamma dose rates in a GANEX extraction solvent by using Monte Carlo calculations

    by Francisco Álvarez-Velarde, Daniel Cano-Ott, J. Cobos, Hitos Galan, Emilio Mendoza, Ana Núñez, Iván Sánchez-García

    Hydrometallurgical reprocessing processes are based on solvent extraction methods to separate U and Pu, being GANEX (Grouped Actinide Extraction) concept the most promising strategy to recover all the actinides together from the spent fuel. For this strategy to be industrially developed, solvents employed must demonstrate good extraction efficiencies in highly radioactive solutions and high nitric acidity, even in the scenario of continuous recycling of the solvent.This work presents the development and evaluation of a methodology for the estimation of the alpha, beta and gamma dose rates absorbed by the solvent chosen for the EURO-GANEX process. Different fuels, burn-ups and cooling decay periods have been simulated with the goal of estimating how much the organic phase (solvent) could be reused before showing significant damage in terms of extraction behavior and solvent composition. To develop this methodology, some aspects of the process industrialization like the time periods have been chosen arbitrarily.Results have shown that the solvent could be recycled multiple times when the fuel comes from a PWR reactor and the burn-up is limited to 60 GWd/tHM, but on the contrary, it can reach the foreseen degradation levels very soon for reactors and fuels with high TRU content and burn-up, due to the alpha radiation (top contributor). Also, issues like the cooling decay period after discharge, the burn-up and TRU content of the spent fuel, and the isotopic composition (fissile content) of the fuel will have to be considered in depth due to their significant impact in the results.

  • Open Access

    Direct Experiments of Neutron Capture on Stable and Unstable Isotopes for Stellar Nucleosynthesis Studies

    by Jorge Lerendegui-Marco, Javier Balibrea-Correa, Victor Babiano-Suarez, César Domingo-Pardo, Gabriel de la Fuente-Rosales, Bernardo Gameiro, Ion Ladarescu, Ariel Tarifeño-Saldivia, Pablo Torres-Sánchez, Oliver Aberle, et al.

    Neutron capture reactions provide essential nuclear physics input for modeling the synthesis of heavy elements in stars. The growing precision of stellar spectroscopy and isotopic measurements in presolar SiC grains now demands cross sections with improved accuracy over the full energy range, and access to unstable nuclei relevant to slow (s-) process branchings and the intermediate (i-) process. This article reviews recent progress in direct neutron capture measurements, focusing on time-of-flight (TOF) experiments at CERN n_TOF and complementary activation techniques. Substantial advances have been achieved for stable s-only and bottleneck isotopes, significantly improving constraints on s-process models. In parallel, the combination of high instantaneous neutron fluxes and advanced detector systems has facilitated first-time neutron capture measurements on several radioactive branching-point nuclei. Feasibility studies, however, reveal current limitations related to sample availability, background conditions, and restricted energy coverage. In this context, the complementarity between TOF and activation emerges as a central strategy. Future developments, including high-flux facilities and novel inverse kinematics experiments in ion storage rings, are expected to extend the boundaries of neutron capture measurements, overcoming current limitations and helping unlock new frontiers in our understanding of stellar nucleosynthesis.

  • Open Access

    First Results of the 64Ni(n,γ) Cross Section Measurement at n_TOF

    by Michele Spelta, Gabriele Cescutti, Sergio Cristallo, Francisco García-Infantes, Alice Manna, Alberto Mengoni, Paolo Maria Milazzo, Riccardo Mucciola, Giuseppe Tagliente, Diego Vescovi, et al.

    The neutron capture cross section of 64Ni is an important parameter in nuclear astrophysics that is needed to accurately simulate stellar nucleosynthesis and validate stellar models. 64Ni is among the seeds of the s-process and its capture cross section has been found to have an important effect on the predicted abundances of many nuclei synthesized in Asymptotic Giant Branch (AGB) and massive stars. Despite its relevance, the measurements of the 64Ni(n,γ) available in the literature are scarce and discrepant. For this reason, a new accurate time-of-flight measurement has been performed at the n_TOF facility at CERN, taking advantage of its high instantaneous neutron flux, and using a highly enriched 64Ni sample. The first preliminary results show important discrepancies with respect to the cross sections recommended in the most recent releases of the evaluated nuclear data libraries. In particular, a large resonance reported at 9.52 keV is not observed. As a consequence, a significant reduction in the Maxwellian-Averaged Cross Section (MACS) obtained from evaluated data libraries in the 5–25 keV thermal energy region is expected.

  • Open Access

    Review of neutron yield from ( α , n ) reactions: data, methods, and prospects

    by D Cano-Ott, S Cebrián, P Dimitriou, M Gromov, M Harańczyk, A Kish, H Kluck, V A Kudryavtsev, I Lazanu, V Lozza, et al.

    Understanding the radiogenic neutron production rate from the ( α , n ) reaction is crucial in many areas of physics, including dark matter searches, neutrino studies, and nuclear astrophysics. In addition to its relevance for fundamental research, the ( α , n ) reaction also plays a significant role in nuclear energy technologies, for example by contributing to neutron production in subcritical systems using UO 2 , as well as in applications such as medical physics. This review examines the current state of ( α , n ) yield calculations and neutron spectra, describes the computational tools used for their estimation, and discusses the available cross-section data. We investigate the uncertainties affecting ( α , n ) yield estimations and propose strategies to enhance their accuracy. Furthermore, we highlight the need for new measurements of ( α , n ) cross-sections for a variety of relevant materials. Such measurements are key to improving neutron flux predictions and reducing uncertainties in sensitivity estimates for next-generation physics experiments operating in the keV–MeV range.


  • Open Access

    Low-uncertainty measurement of the 239Pu(n,f) cross section at n_TOF in a very broad energy range from 0.02 eV up to 10 MeV

    by A. Sánchez-Caballero, D. Cano-Ott, E. Mendoza, V. Alcayne, J. Andrzejewski, R. Capote, T. Cardinaels, P. Dries, J. García Pérez, A. Gawlik-RamięGa, et al.

  • Open Access

    Status of DONES neutronics, source terms analyses and radiation protections

    by Yuefeng Qiu, Thomas Berry, Klemen Ambrožic, Barbara Bieńkowska, Hari Chohan, Aljaz Cufar, Dominik Dworak, Bor Kos, Victor Lopez Ochoa, Fernando Mota, et al.

    IFMIF-DONES (International Fusion Materials Irradiation Facility – Demo Oriented NEutron Source) is an accelerator-based neutron irradiation facility for the study and qualification of materials used for the design, licensing, and reliable operation of fusion reactors such as DEMO. Neutron serves as a critical tool for irradiating and testing material samples, while also posing significant radiation safety considerations. This work provides a comprehensive overview of neutronics studies and nuclear analyses, beginning with the accelerator where neutron and gamma are generated from deuteron losses and deposition, progressing to the test systems where most d-Li neutrons are produced, and then to the systems and areas where the radiation is covered. Key aspects analyzed include neutron-induced material damage and gas production, nuclear heating, radiation doses during both beam-on and beam-off conditions, activation of structural components and liquids (such as lithium and water), and the assessment and optimization of radiation shielding across the accelerator systems, target systems, lithium systems, and building and plant systems. Additionally, this article highlights recent advancements in neutronics simulation tools, evaluations of nuclear data, and experimental efforts, all of which provide essential foundations for nuclear analyses in DONES.


  • Open Access

    Neutron capture measurements with high efficiency detectors and the Pulse Height Weighting Technique

    by E. Mendoza, V. Alcayne, D. Cano-Ott, E. González-Romero, T. Martínez, A. Pérez de Rada, A. Sánchez-Caballero, J. Balibrea-Correa, C. Domingo-Pardo, J. Lerendegui-Marco, et al.


  • Open Access

    Nuclear data libraries for IFMIF-DONES neutronic calculations

    by E. Mendoza, D. Cano-Ott, A. Ibarra, F. Mota, I. Podadera, Y. Qiu, S.P. Simakov

    International Fusion Materials Irradiation Facility-DEMO Oriented NEutron Source (IFMIF-DONES) is an installation aimed to irradiate with a high neutron flux materials relevant for the construction of the DEMOnstration fusion power plant (DEMO), in order to study the damage due to irradiation. Neutrons are generated using a 40 MeV and 125 mA deuteron beam impinging on a thick liquid lithium target. With these characteristics, damage due to irradiation comparable to that in the first wall of a fusion power reactor is achieved. In this paper we investigate the differences in the neutronic calculations of the IFMIF-DONES design when using different nuclear data libraries. We first studied the differences in neutron production due to Li(d, xn) reactions between different models and evaluations, comparing the different results with experimental data. Additionally, we tested the performance of the MCNP6.2 and Geant4 Monte Carlo codes when using deuteron incident data libraries. Then, we performed neutronic calculations of the IFMIF-DONES design using the most reliable Li(d, xn) neutron production models available, which are the FZK-2005 and JENDL/DEU-2020 evaluations according to the results obtained in the first part of the study. Thus, the differences in these evaluations are propagated to different neutronic calculation results: neutron flux, primary displacement damage, gas production, and heating in the materials to be irradiated. Finally, we also carried out these same neutronic calculations while using different nuclear data libraries for the neutron transport.


  • Open Access

    Measurement of the α ratio and (n,γ) cross section of U235 from 0.2 to 200 eV at n_TOF

    by J Balibrea-Correa, E Mendoza, D Cano-Ott, E González, R Capote, M Krtička, S Altstadt, J Andrzejewski, L Audouin, V Bécares, et al.

    We measured the neutron capture-to-fission cross-section ratio (α ratio) and the capture cross section of U235 between 0.2 and 200 eV at the n_TOF facility at CERN. The simultaneous measurement of neutron-induced capture and fission rates was performed by means of the n_TOF BaF2 Total Absorption Calorimeter (TAC), used for detection of γ rays, in combination with a set of micromegas detectors used as fission tagging detectors. The energy dependence of the capture cross section was obtained with help of the Li6(n,t) standard reaction determining the n_TOF neutron fluence; the well-known integral of the U235(n,f) cross section between 7.8 and 11 eV was then used for its absolute normalization. The α ratio, obtained with slightly higher statistical fluctuations, was determined directly, without need for any reference cross section. To perform the analysis of this measurement we developed a new methodology to correct the experimentally observed effect that the probabilities of detecting a fission reaction in the TAC and the micromegas detectors are not independent. The results of this work have been used in a new evaluation of U235 performed within the scope of the Collaborative International Evaluated Library Organisation (CIELO) Project, and are consistent with the ENDF/B-VIII.0 and JEFF-3.3 capture cross sections below 4 eV and above 100 eV. However, the measured capture cross section is on average 10% larger between 4 and 100 eV.