Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Oriana Palma Calabokis has a total of 79 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Understanding Complexity in Construction Project Management: A Systematic Review and Integrative Framework Linking Complexity, Project Dynamics, Management Approaches, and Performance

    by Walter Antonio Abujder Ochoa, Angela Gabriela Torrico Arce, Oriana Palma Calabokis, Vladimir Ballesteros-Ballesteros, Alfredo Iarozinski Neto

    Construction projects are increasingly characterized by uncertainty, interdependence, organizational fragmentation, technological integration, and evolving interactions that challenge the assumptions of traditional linear project management approaches. This study provides a systematic and integrative understanding of complexity in construction project management by identifying its principal dimensions, dynamic behaviors, management approaches, and implications for project performance. A systematic literature review was conducted and reported in accordance with the PRISMA 2020 guidelines, using Scopus as the primary bibliographic database and a supplementary literature update, resulting in a final evidence base of 136 unique sources. Descriptive and bibliometric analyses were complemented by a qualitative synthesis of the reviewed literature. The findings indicate that construction project complexity can be interpreted through five interconnected dimensions: structural, organizational, technological, contextual, and dynamic complexity. Dynamic project behavior is particularly associated with feedback loops, time delays, non-linear relationships, emergence, and evolving interactions among project components. The review further indicates that complexity does not determine project performance independently; rather, outcomes emerge from the interaction between project complexity, dynamic system behavior, and the managerial capacity to coordinate, interpret, and adapt to changing conditions. Lean-oriented approaches, systems thinking, System Dynamics, socio-technical perspectives, governance mechanisms, BIM, and simulation-based approaches provide complementary mechanisms for addressing different aspects of complexity. Based on these findings, an integrative framework is proposed linking project complexity, dynamic project behavior, management approaches and organizational capabilities, and project performance through recursive feedback relationships. The study concludes that complexity should be treated as an inherent characteristic of construction project systems and managed through systemic, adaptive, and integrative approaches rather than through simplification or deterministic control alone.

  • Open Access

    Corrosion Resistance of Plasma-Nitrided AISI 316L Stainless Steel with Intermittent Nitrogen Flow

    by Andrey Matheus Vianna, Oriana Palma Calabokis, Yamid E. Nuñez de la Rosa, Cláudia Eliana Bruno Marino, Paulo César Borges, Euclides Alexandre Bernardelli, Márcio Mafra

    Low-temperature plasma nitriding of austenitic stainless steels produces an expanded austenite (γN) layer that enhances surface hardness but may generate high residual stress and cracking, compromising corrosion resistance. This work evaluates the influence of nitrogen flow duty cycle on the corrosion resistance of AISI 316L austenitic stainless steel plasma-nitrided at 425 ℃ for 2 h. Continuous nitrogen flow (2C) and intermittent flow at 50% (2P50) and 10% (2P10) nitrogen duty cycles were investigated, with untreated steel (UN) as reference. Samples were characterized by SEM, XRD, nanoindentation, OCP, EIS, potentiodynamic polarization in 3.5 wt.% NaCl and XPS. Reducing the nitrogen duty cycle produced layers with lower nitrogen incorporation and reduced cracking. However, excessive reduction in the duty cycle decreased corrosion resistance, indicating the importance of sufficient nitrogen incorporation for electrochemical performance. The 2C condition exhibited the most noble corrosion potential and the highest localized corrosion potential, whereas 2P10 showed lower corrosion resistance than UN. EIS indicated more stable, thicker passive films at 2C and 2P50. The results suggest that nitrogen availability influences passive-film stability and may contribute to the synergistic protective effect of nitrogen and molybdenum. Overall, 2P50 provided a balance between surface hardening, layer integrity, and corrosion resistance.

  • Open Access

    Complexity and Construction Management: An Integrated Analysis of Logistics, Organizational Processes, and Productivity

    by Walter Antonio Abujder Ochoa, Diego Andrés Chacón Quiroga, Sebastián Javier García Mendivil, Miguel Rivero Chavez, Dayler Taborga Guzmán, Alfredo Iarozinski Neto, Oriana Palma Calabokis

    Prior studies have commonly examined organizational structure, managerial processes, construction logistics, productivity, and project complexity through separate research streams, leaving limited empirical evidence on how these domains are positioned within a single multilevel construction management framework. This study develops an integrated analysis of their relationships using data from construction firms operating in Cochabamba, Bolivia, and the Metropolitan Region of Curitiba, Brazil. A quantitative, non-experimental, cross-sectional design was adopted, and 108 valid survey responses were analyzed through descriptive statistics, correlation analysis, Exploratory Factor Analysis, Principal Component Analysis, reliability assessment, regional comparison, and Relative Importance Index ranking. The results showed that formal organizational characteristics displayed comparatively limited direct associations with performance-related variables, whereas stronger relationships were concentrated among managerial, strategic–logistical, and operational processes. The project complexity analysis retained three dimensions—technical, process-stage, and planning-related complexity—which jointly explained 61.271% of the rotated variance. At the operational level, equipment and tool maintenance, schedule adherence, and material storage received the highest Relative Importance Index values, with RII = 0.776 for each item. The findings indicate that construction performance is more closely associated with the dynamic processes through which information, decisions, responsibilities, and resources are coordinated than with formal structure considered independently. The study contributes a multilevel conceptual framework in which project complexity is interpreted as increasing the coordination requirements linking organizational arrangements, managerial processes, logistics, and operational reliability.


  • Open Access

    Ensemble Gap-Filling of Missing Daily Precipitation Data with CHIRPS, IMERG and Statistical Methods: A Case Study in Bolivia-Tarija

    by Michael Diego Lizarazu Rojas, Luis Edgar Montenegro Terrazas, Marko Andrade Uzieda, Moisés Alejandro Sánchez Málaga, Yamid E. Nuñez de la Rosa, Oriana Palma Calabokis

    Precipitation data are essential for hydrological modeling, water resource management, and climate risk assessment. However, meteorological time series frequently contain missing records due to equipment failures, maintenance issues, and logistical limitations, particularly in remote regions with sparse monitoring networks. This study evaluates three gap-filling approaches, Linear Regression (LR), Multiple Linear Regression (MLR), and Inverse Distance Weighting squared (IDW2), for reconstructing missing daily precipitation records at the Saykan Perulas station in southern Bolivia. CHIRPS and IMERG satellite-derived precipitation products were incorporated as complementary data sources to support reconstruction under data-scarce conditions. Model performance was assessed by introducing continuous multi-year gaps representing approximately 27% of the observed record to simulate a realistic worst-case reconstruction scenario. Statistical evaluation included RMSE, MAE, NSE, R2, and intensity contingency matrices. The ensemble-based MLR approach, combining nearby station observations with CHIRPS data, achieved the best overall performance (RMSE = 43.0; NSE = 0.65), showing moderate improvements relative to the standalone approaches. CHIRPS generally outperformed IMERG, likely due to its finer spatial resolution (0.05° vs. 0.1°) and better representation of local precipitation variability. In contrast, IDW2 exhibited the weakest overall performance, particularly in reproducing temporal precipitation variability and intermediate rainfall intensities. The results suggest that integrating satellite-derived precipitation products with ground-based observations can improve the continuity and reconstruction of precipitation series in regions characterized by sparse observational coverage, complex topography, and high spatial rainfall variability.

  • Open Access

    Comparative Evaluation of Lime–NaCl Catalyzed and Xanthan Gum–Fiber Reinforced Soil Stabilization: Experimental and Machine Learning Assessment of Strength and Stiffness

    by Jair Arrieta Baldovino, Oscar E. Coronado-Hernandez, Oriana Palma Calabokis

    The sustainable stabilization of clayey soils has become a critical strategy for improving their mechanical performance while reducing environmental impact. This study compares two distinct stabilization systems applied to the same low-plasticity clay (CL) from Cartagena de Indias, Colombia: (i) lime catalyzed with sodium chloride (NaCl) and (ii) xanthan gum (XG) reinforced with polypropylene fibers (PPF). A series of laboratory tests was performed to evaluate the unconfined compressive strength (qu) and small-strain stiffness (Go) of both systems under controlled compaction and curing conditions. The lime–NaCl system demonstrated accelerated early-age strength and stiffness development, reaching qu values above 2.5 MPa and Go exceeding 10 GPa after 28 days of curing, mainly attributed to enhanced pozzolanic reactions catalyzed by NaCl. Conversely, the XG–PPF blends exhibited progressive improvements in mechanical performance, achieving notable gains after 90 days due to the polymeric bonding of XG and the fiber–matrix reinforcement that enhanced ductility and post-peak behavior. When normalized through the porosity–binder index, both systems exhibited power-law trends, with the lime–NaCl mixtures displaying higher exponents indicative of cementation-controlled behavior, while the XG–PPF mixtures showed lower exponents consistent with interparticle bonding and network formation. These results highlight the complementary mechanisms of chemical and biopolymeric stabilization, providing insights into the selection of sustainable binders tailored to specific design requirements in tropical clays. This research demonstrated that the implementation of machine learning models enhanced the fitting accuracy of the two soil stabilization methods when compared with traditional mathematical regression models commonly used in geotechnical engineering. Among the tested approaches, the neural network and Gaussian process regression models exhibited the best performance, achieving R2 values ranging from 0.917 to 0.980 during the validation stage.


  • Open Access

    Influence of Heat Treatment Temperature on Crevice and Pitting Corrosion of UNS S32205 Duplex Stainless Steel

    by Alba Regina Turin, Jomar José Knaip Ribeiro, Alex Pizzatto, Oriana Palma Calabokis, Yamid E. Nuñez de la Rosa, Pedro Victorio Caetano Abrantes Quadros, Claudio Moreira de Alcantara, Tiago Cousseau, Paulo César Borges

    Duplex stainless steels (DSSs) have outstanding mechanical properties and corrosion resistance. However, operating conditions and/or inadequate heat treatments can induce precipitation of deleterious phases or change the proportion of ferrite (α) and austenite (γ) phases. This study evaluates the impact of ageing at 850 and 950 °C and solubilization at 1000 and 1150 °C treatments on pitting and crevice corrosion of DSS UNS S32205. Cyclic polarization tests revealed that samples with a more balanced α/γ ratio (≈50/50), that is, the base material (BM) and that solubilized at 1000 °C, exhibited the lowest corrosion rate (0.044–0.074 μm/year) and better repassivation capacity (E R ≈ 0.96 V). Conversely, the 1150 °C treatment led to reduced corrosion resistance (0.158 ± 0.009 μm/year) and is associated with a reduction in the %Cr in α. Pitting is present in the aged conditions only. Moreover, the BM and 1000 °C samples showed the lowest crevice corrosion susceptibility, presenting the lowest volume loss (1 × 10 6 μm 3 cm −2 ) and current densities (≈1000 μA cm −2 ), followed by samples treated at 1150, 950, and 850 °C. Therefore, the results show that ageing treatments make UNS S32205 susceptible to pitting and crevice corrosion, which is related to the deleterious phase fraction and the α/γ ratio imbalance.


  • Open Access

    Localized Corrosion by Chromium Nitride Precipitation in Low-Temperature Plasma-Nitrided Inconel 718

    by Juan Fernando Uribe Cruz, Oriana Palma Calabokis, Vladimir Ballesteros-Ballesteros, Yamid E. Nuñez de la Rosa, Edward Andrés Gil González

    Inconel 718 is widely used in chloride-bearing environments where localized corrosion resistance is critical. This study assesses the effect of continuous low-temperature plasma nitriding (425 °C, 2 h) on the microstructure, hardness, and localized corrosion behavior of Inconel 718. The nitriding treatment produced a surface layer with hardness values up to three times higher than those of the untreated material, associated with a nitrided layer of thickness 6.1–6.7 µm. X-ray diffraction confirmed the precipitation of CrN without the formation of nitrogen-expanded phases. Cyclic polarization tests revealed non-significant changes in the corrosion parameters, except for a two-fold increase in the corrosion rate of nitrided samples. Also, the critical pitting temperature (CPT) decreased by more than 30 °C on average in the nitrided condition, falling below 10 °C. These findings indicate that, although continuous plasma nitriding enhances surface hardening, it significantly compromises the alloy’s resistance to localized corrosion in chloride-rich environments.


  • Open Access

    Production of Organic Acids from Cashew Nut Shell Liquid (CNSL) via Electrochemical Synthesis

    by Jorge A. Ducuara, Alvaro A. Arrieta, Oriana Palma Calabokis

    Environmental problems arising from conventional production models have posed a significant challenge in the search for renewable sources as raw materials for the production of everyday chemical compounds through more sustainable alternatives. The objective of the present work was the electrochemical synthesis of organic acids from the liquid of the natural and technical cashew nut shell (CNSLn and CNSLt), employing chronopotentiometry using a potentiostat and a graphite working electrode. Two concentrations (0.01–0.1% v/v) of CNSLn and CNSLt, two concentrations of NaOH as supporting electrolyte (0.125–2 M), and two current densities (40–60 mA/cm2) were tested in the experiments. Organic acids were detected and quantified by HPLC. To characterize the redox processes occurring in the constituents of CNSL, spectroelectrochemical analysis (FTIR–cyclic voltammetry), FTIR, and chronoamperometry were performed. The maximum concentrations obtained in the treatments were: acetic acid (828.86 mg/L), lactic acid (531.78 mg/L), and formic acid (305.4 mg/L), while other acids present in lower concentrations included oxalic, propionic, citric, and malonic acids. Voltammetry characterizations showed three irreversible oxidation processes in the anodic wave during the first cycle, indicating that the first process involved the formation of the phenoxy radical, the second process the formation of hydroquinones and benzoquinones, and the third process the cleavage of the aromatic ring and the aliphatic chain to form the organic acids. Furthermore, another oxidation pathway was observed, consisting of a fourth process in the second voltammetry cycle, corresponding to the nucleation of the phenoxy radical, evidenced as the formation of the C–O–C bond visible at 1050 cm−1 in the infrared spectrum. From this route, a polymer was formed on the electrode surface, which limited the yield of organic acid synthesis. Finally, this research provides new insights in the field of electrochemistry, specifically in the synthesis of organic acids from CNSL as a renewable feedstock, with the novelty being the production of oxalic, propionic, citric, and malonic acids.


  • Top Cited Papers
    Open Access

    Interlinking Urban Sustainability, Circular Economy and Complexity: A Systematic Literature Review

    by Walter Antonio Abujder Ochoa, Angela Gabriela Torrico Arce, Alfredo Iarozinski Neto, Mayara Regina Munaro, Oriana Palma Calabokis, Vladimir A. Ballesteros-Ballesteros

    Urban sustainability challenges demand integrated frameworks capable of addressing the dynamic, non-linear nature of cities. This study explores how the principles of the circular economy and complexity theory intersect to support systemic transformation in sustainable urban planning. Through a systematic literature review of 71 peer-reviewed articles published between 2015 and 2025, we analyze conceptual, methodological, and practical articulations across multiple thematic axes, including circular governance, urban metabolism, regenerative design, adaptive planning, digital integration, and environmental justice. Bibliometric and content analyses were conducted using Scopus metadata, VOSviewer for thematic clustering, and the StArt software (Version 3.4) to structure article selection. The findings reveal that circular economy provides practical tools for resource efficiency and regeneration, while complexity theory offers an adaptive framework to navigate uncertainty, emergent behaviors, and feedback dynamics. The synthesis suggests that their integration enables a more holistic and resilient approach to urban transformation. However, gaps remain in social inclusivity, long-term assessment, and the operationalization of complexity-informed planning. This study contributes to advancing a transdisciplinary agenda for circular and adaptive urban futures, offering insights for scholars, planners, and policymakers aiming to reconfigure cities within planetary boundaries.


  • Open Access

    Synthesis and Physical–Chemical Characterization of a Biopolymer Derived from Cassava Starch, Cashew Nutshell Liquid, and Diammonium Phosphate

    by Manuel Acosta Humánez, Yair Vega Vega, Alvaro Arrieta Almario, Oriana Palma Calabokis, Jair de Jesús Arrieta Baldovino

    A biopolymer was synthesized using starch, cashew nutshell liquid (CNSL), and the commercial fertilizer diammonium phosphate (DAP). The biopolymer and its constituents were characterized using SEM, infrared spectroscopy, X-ray diffraction (XRD), ultraviolet–visible diffuse reflectance spectroscopy (UV-Vis DRS), and thermal analysis by TGA and DSC. The results showed that fertilizer particles could be encapsulated by the starch and CNSL matrix. Functional groups and ions in the biopolymer showed characteristic bands associated with starch, CNSL, and DAP fertilizer. Moreover, the biopolymer diffraction peaks contained XRD peaks of starch and DAP. The crystallinity of the biopolymer decreased. Starch, CNSL, and DAP electronic transitions appeared in the biopolymer, with possible signal overlapping. The bandgap of starch and biopolymer did not differ significantly (6.19 and 6.16 eV, respectively). Both materials acted as insulators. Differential scanning calorimetry/thermogravimetric evidenced the materials’ thermal behavior, where water elimination, degradation, oxidation, and gas formation were registered.