Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Paweł Śliwiński has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The influence of water and rapeseed oil on the durability of the hydraulic satellite motor

    by Paweł Śliwiński

    This paper describes the results of tests on the satellite motor supplied with water and edible rapeseed oil. The viscosity and density characteristics of these liquids are presented. First, the motor parameters were examined, including torque and power consumption as functions of speed for given constant pressure drops in the motor. Next, durability tests were conducted at a constant pressure drop of 20 MPa and a constant rotational speed of 1500 rpm. The motor absorbency and the torque were recorded as functions of the motor operating time. The influence of water and rapeseed oil on volumetric, mechanical, and pressure losses is presented. The relative mass loss characteristics of the working mechanism components as functions of the motor operating time, when supplied with both water and rapeseed oil, are also presented. The most rapidly wearing component of the satellite mechanism was identified.

  • Open Access

    Shaping the flow characteristics of a proportional directional valve

    by Mateusz Kosek, Pawel Sliwinski

    This article presents a methodology for designing control edges for proportional hydraulic directional valves for the use in hydraulic governor systems of hydro turbines requiring high flow rates. On the basis of multivariate CFD studies, the optimal shape of control edges was determined, ensuring the achievement of a proportional relationship between the increase in flow rate and the increase in opening of the spool located in the body of the directional valve. The results of the performed CFD tests for selected characteristic values of the opening of the spool of the directional valve at a certain pressure drop made it possible to create a mathematical description defining the flow rate through a proportional hydraulic directional valve. New mathematical formulas were proposed for calculating the liquid flow rate in the throttling gap of a proportional directional valve as a function of spool displacement and as a function of pressure drop across the gap. Based on the data obtained, a prototype proportional hydraulic directional valve was developed for high flow rates. Conducting laboratory tests of the directional valve confirmed the validity of the assumptions made for the development of throttle gaps in the spool of the proportional directional valve. A comparison of the flow rate characteristics as a function of spool displacement for a constant pressure drop for the values obtained during laboratory tests, CFD simulation tests and for the values obtained from mathematical calculations showed that the differences between the obtained values did not exceed 8% over the entire range of opening the throttle gap of the directional valve.


  • Open Access

    Theoretical background of the operating parameters of the satellite working mechanism of the hydraulic positive displacement machine

    by Pawel Sliwinski

    This article describes a method for determining the instantaneous geometric working volume of a satellite mechanism that is commonly used as a working mechanism in positive displacement machines (pump and motor). A new mathematical formula for calculating the instantaneous geometric working volume as a function of the angle of rotation of the shaft (rotor) has been proposed. For the satellite mechanism operating as a pump, the mathematical formula for the instantaneous flow rate in this mechanism as a function of the angle of rotation of the rotor (shaft) has been developed. The mathematical formula for the torque indicated in this mechanism (pumping operation) was also developed. Similarly, analyses were carried out for a satellite mechanism operating as a motor. Mathematical formulae were presented to calculate the instantaneous speed of the motor shaft and the instantaneous pressure in the motor’s supply port. To confirm the results of the mathematical analyses, experimental tests were carried out with a prototype satellite machine at a low constant speed. The satellite machine was tested in both pump and motor mode. The results of the tests confirmed that the torque on the shaft is not constant in both pump and motor operation at a constant pressure drop in this machine. This torque depends strictly on the instantaneous working volume of the machine and is therefore a function of the angle of rotation of the shaft. Similarly, at a constant speed, the flow rate (motor absorption) in the machine is also not constant.


  • Open Access

    Problems of Measuring Gas Content in Oil in a Two-Phase Flow: A Review

    by Cezary Edling, Paweł Śliwiński

    In view of the necessity of measuring the air content in oil in two-phase flows in the context of general industry, a review of the most popular methods of measuring the air content in oil was carried out. This review includes an assessment of their advantages and disadvantages and of whether they meet criteria such as the degree of filling, the size and number of bubbles, verification, the absence of additional pressure drops, simplicity, and repeatability. In the review, the following methods were examined: the classic trapping method, a modified trapping method, a trapping method using hydrostatic pressure loss, the pressure loss due to frictional flow resistance, the pressure loss with a rapid increase in diameter, the pressure drop in a Venturi tube, the pressure drop in an orifice, a method using the Coriolis effect, the electrical resistance method, the electrical conductivity method, the electromagnetic method, the electrical capacitance method, the thermal anemometry method, the liquid–solid contact electrification method, the photographic method, holography, light scattering, sound dispersion, the ultrasonic transit-time method, X-ray radiation, gamma radiation, neutron radiation, and fiber-optic methods.


  • Open Access

    Geometric working volume of a satellite positive displacement machine

    by Pawel Sliwinski

    This article describes a method for determining the geometric working volume of satellite positive displacement machines (pump and motor). The working mechanism of these machines is satellite mechanism consisting of two non-circular gears (rotor and curvature) and circular gears (satellites). Two variants of the satellite mechanism are presented. In the first mechanism, the rolling line of the rotor is a sinusoid "wrapped" around a circle. In the second mechanism, the rolling line of the rotor is a double sinusoid "wrapped" around a circle. A method for calculating the area of the working chamber as a function of the rotor rotation angle is presented, based on mathematical formulae of the rotor, the curvature and the satellite rolling lines. It has been shown that the second variant of the satellite mechanism is advantageously characterised by a larger difference between the maximum area of the working chamber and the minimum area of this chamber. New mathematical formulas have been proposed to calculate the area of the working chamber for any angle of rotation of the shaft (rotor) based on the maximum and minimum values of the area of this chamber. It was thus confirmed that the geometric working volume depends on the maximum and minimum area of a working chamber and on the height of the satellite mechanism. The analyses of the area of the working chamber were carried out both for the mechanism without gears (the area delimited by the rolling lines of the elements of the mechanism) and for the real mechanism with gears. Differences in the values of these fields were also detected.


  • Open Access

    Influence of operating pressure on the durability of a satellite hydraulic motor supplied by rapeseed oil

    by Pawel Sliwinski

    This article describes the results of a durability test of a hydraulic satellite motor supplied by rapeseed oil. The tests were carried out on a test stand in a power recuperation system. The tests of the motor were carried out at a constant shaft speed for three fixed pressure drops in the motor. This made it possible to demonstrate the influence of the motor operating pressure on the durability of the satellite mechanism. The influence of the pressure drop in the motor and the influence of the operating time on the motor absorbency, on the torque on the motor shaft and the influence on the volumetric and hydraulic-mechanical efficiency are also shown. The basic relationship between the efficiency of the motor and the temperature rise in the motor is also described. The results of the calculations of the temperature rise in the motor are compared with the experimental results. The article also shows which components of the motor’s working mechanism wear out the fastest. The cause of the wear and failure is also explained.