ADAdrián Delgado

Adrián Delgado

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Adrián Delgado has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Physics-Informed Neural Networks for Multi-Location ABL Wind Profiling with Minimal Instrumentation

    by Rubén Echeverría, Luis Santamaría, Fernando Parra, Adrián Delgado, Adrián García-Gutiérrez

    The vertical wind profile within the Atmospheric Boundary Layer (ABL) is a critical variable for a wide range of applications, including wind energy, air traffic and Unmanned Aerial System (UAS) management, pollutant dispersion, and urban air mobility. However, its accurate characterization typically requires expensive vertical-profiling LiDAR instruments, which limits the number of locations that can be simultaneously monitored. Building upon previous work in which machine-learning algorithms were trained on LiDAR data from the University of León (Spain) to reconstruct full ABL wind profiles from a single near-surface measurement, this study replaces the traditional data-driven neural network approach with Physics-Informed Neural Networks (PINNs), embedding a physical constraint directly into the loss function as evaluated by automatic differentiation, and tests two such constraints under architectural control: the Ekman boundary-layer momentum balance, closed with a Monin–Obukhov eddy viscosity, and a shear-constrained formulation based on a power-law profile with an inferred exponent. With dense supervision at the target heights, neither constraint improves on an architecture-matched network without a physical term (RMSE 1.35–1.36 m/s, direction MAE 20.1–20.4° across all three, Kruskal–Wallis p=0.0125). In a vertical-extrapolation protocol, training with gates up to 111 m, selecting models by their skill at 140 m, and testing blind on 170–300 m, the Ekman constraint shows no detectable advantage over its own architectural control. In contrast, the shear-constrained model does, reaching 1.80±0.01 m/s speed RMSE and 27.0°±0.3° direction MAE against 2.66±0.10 m/s and 34.2°±1.8° for the Ekman-constrained arm and 2.61±0.12 m/s and 33.9°±2.0° for the physics-free arm, which are statistically indistinguishable from one another; the shear-constrained gain is confirmed against its own architectural control (2.64±0.08 m/s, 33.0°±1.8°, matching the physics-free arm), ruling out the additional output as the explanation, and converts an erratic extrapolator into a stable one. The results are consistent with the benefit of embedding physics into the loss being therefore specific to the extrapolation regime and to the formulation tested, not a generic property of physics-informed learning. These findings are based on data from a single suburban site, and multi-site validation remains necessary before they can be generalized. By eliminating the need for continuous LiDAR operation after the training phase, the proposed methodology aims to enable cost-effective monitoring of multiple locations with a single instrument.

  • Open Access

    Physics-Informed Neural Networks for Multi-Location ABL Wind Profiling with Minimal Instrumentation

    by Rubén Echeverría, Luis Santamaría, Fernando Parra, Adrián Delgado, Adrián García-Gutiérrez

    The vertical wind profile within the Atmospheric Boundary Layer (ABL) is a critical variable 2 for a wide range of applications, including wind energy, air traffic and unmanned aerial 3 system (UAS) management, pollutant dispersion, and urban air mobility. However, its 4 accurate characterization typically requires expensive vertical-profiling LiDAR instruments, 5 which limits the number of locations that can be simultaneously monitored. Building upon 6 previous work in which machine-learning algorithms were trained on LiDAR data from the 7 University of León (Spain) to reconstruct full ABL wind profiles from a single near-surface 8 measurement, this study replaces the traditional data-driven neural network approach with 9 Physics-Informed Neural Networks (PINNs), embedding a physical constraint directly into 10 the loss function as evaluated by automatic differentiation, and tests two such constraints 11 under architectural control: the Ekman boundary-layer momentum balance, closed with a 12 Monin-Obukhov eddy viscosity, and a shear-constrained formulation based on a power-law 13 profile with an inferred exponent. With dense supervision at the target heights, neither 14 constraint improves on an architecture-matched network without a physical term (RMSE 15 1.35-1.36 m/s, direction MAE 20.1-20.4◦ across all three, Kruskal-Wallis p = 0.0125), and 16 in a vertical-extrapolation protocol, training with gates up to 111 m, selecting models 17 by their skill at 140 m, and testing blind on 170-300 m, the Ekman constraint shows 18 no advantage over its own architectural control, but the shear-constrained model does, 19 reaching 1.80 ± 0.01 m/s speed RMSE and 27.0◦ ± 0.3◦ direction MAE against 2.66 ± 0.10 20 m/s and 34.2◦ ± 1.8◦ for the Ekman-constrained arm and 2.61 ± 0.12 m/s and 33.9◦ ± 21 2.0◦ for the physics-free arm, which are statistically indistinguishable from one another; 22 the shear-constrained gain is confirmed against its own architectural control (2.64 ± 0.08 23 m/s, 33.0◦ ± 1.8◦, matching the physics-free arm), ruling out the additional output as 24 the explanation, and converts an erratic extrapolator into a stable one. The benefit of 25 embedding physics into the loss is therefore specific to the extrapolation regime and to the 26 formulation tested, not a generic property of physics-informed learning. By eliminating the 27 need for continuous LiDAR operation after the training phase, the proposed methodology 28 aims to enable cost-effective monitoring of multiple locations with a single instrument.

  • Open Access

    Analysis of the accuracy and computational efficiency of transition–turbulence models for propeller performance prediction at low and high Reynolds Numbers

    by Fernando Parra, Adrián García-Gutiérrez, Adrián Delgado, Diego Domínguez Fernández

    The emergence of new aerospace vehicle concepts has renewed interest inoptimizing propeller design. Among them, stratospheric vehicles or eVTOLaircraft have in common that their propellers operate at low Reynolds num-bers. To determine propeller performance parameters, computational fluiddynamics is a widely used technique. Hence, this research assesses the accu-racy and efficiency of different transition-turbulence models to determine theconvenience —or not— of using a more complex turbulence model. The pre-diction of thrust and power coefficients for propellers operating at both highand low Reynolds numbers are compared using different turbulence models.From the analysis conducted in this work, at high Reynolds number operat-ing conditions, transition-turbulence models provide no advantage, whereasat low Reynolds numbers, γ - Reθ SST model is preferred. Additionally,at moderate Reynolds number operating conditions γ SST transition modeloffers the best compromise between accuracy and computational efficiency.These findings provide valuable insights for selecting turbulence models inpropeller aerodynamic design and help to reduce its computational cost.

  • FROM HANGAR TO CLASSROOM: AUGMENTED REALITY STATIONS ON A TRAINING GLIDER FOR AN AERODYNAMICS COURSE

    by Fernando Parra, Pablo Barreiro, Deibi López, Adrián Delgado, Adrián García-Gutiérrez

  • Open Access

    Waveform relaxation method for parallel orbital propagation

    by Carlos Rubio, Adrián Delgado, Adrián García-Gutiérrez, Alberto Escapa

  • Open Access

    Uncertainty Quantification in CFD Aerodynamics: Methods, Applications, and Future Directions

    by Adrián García-Gutiérrez, Diego Domínguez, Adrián Delgado, Carlos Rubio

    This paper provides a comprehensive review of uncertainty quantification (UQ) methods and their applications in CFD aerodynamics. The review begins by discussing the various sources of uncertainty in CFD simulations, highlighting their impact on aerodynamic predictions. It then explores a range of UQ methods, including non-probabilistic, probabilistic, and Bayesian approaches, detailing their strengths and limitations in the context of aerodynamics. The paper further examines the application of these methods to real-world CFD problems, showcasing their effectiveness in addressing uncertainties inherent in aerodynamic simulations. Additionally, challenges and limitations of applying UQ techniques in CFD aerodynamics are critically evaluated. The review concludes by outlining potential future research directions aimed at advancing UQ methodologies and their integration into CFD-based aerodynamic design and analysis. Key takeaways from the study are presented to provide a foundation for further developments in this important area of research.


  • Open Access

    Experimental Calculation of Added Masses for the Accurate Construction of Airship Flight Models

    by Deibi López, Diego Domínguez, Adrián Delgado, Adrián García-Gutiérrez, Jesús Gonzalo

    In recent years, interest in airships for cargo transport and stratospheric platforms has increased, necessitating accurate dynamic modeling for stability analysis, autopilot design, and mission planning, specifically through the calculation of stability derivatives, like added mass and inertia. Despite the several CFD methods and analytical solutions available to calculate added masses, experimental validation remains essential. This study introduces a novel methodology to measure these in a wind tunnel, comparing the results with prior studies that utilized towing tanks. The approach involves designing the test model and a crank-slider mechanism to generate motion within the wind tunnel, considering load cell sensitivity, precision, frequency range, and Reynolds numbers. A revolution ellipsoid model, made from extruded polystyrene, was used to validate analytical solutions. The test model, measuring 1 m in length with an aspect ratio of 6, weighing 482 g, was moved along rails by the crank-slider system. By increasing the motion frequency, structural vibrations affecting load cell measurements were minimized. Proper signal processing, including high-pass filtering and second-order Fourier series fitting, enabled successful virtual mass calculation, showing only a 2.1% deviation from theoretical values, significantly improving on previous studies with higher relative errors.


  • Open Access

    Cruise Range Optimization of a Propeller-Driven Light Aircraft Using a Direct Transcription Method with a Regularization Term

    by Adrián Delgado, Carlos Rubio, Diego Domínguez, Alberto Escapa

    The problem of maximizing the range of a propeller-driven aircraft in a level flight cruise is analyzed within the framework of optimal control. The specific fuel consumption and propeller efficiency of its propulsive system are characterized by functions of the velocity and engine power (full model), in contrast to previous works, where they were considered to be constant. To conduct the study, a notional Piper Cherokee PA-28 is selected as representative of light aircraft, defining both the airplane and mission features. Two simplified models are also derived: the Von Mises model, with constant specific fuel consumption and propeller efficiency, and the Parget and Ardema model, defined by constant specific fuel consumption and propeller efficiency depending on the velocity. The problem is solved numerically by means of a direct transcription method. Since the optimal problems of the Von Mises and Parget and Ardema models are singular, it is necessary to incorporate a regularization term. Such a numerical algorithm is validated against the analytical solution given by the Breguet formulation. In this context, the velocity and mass (state variables), the power throttle (control), and the best range are determined. The full model provides a maximum range of 1492 km. The differences between the Von Mises and Parget and Ardema models are about 24 km and 1 km, respectively. A non-optimal steady cruise is also analyzed, providing a significant reduction in the flight time, with a decrease of about 2% of the range. The evolution of the state variables and control in the steady cruise, however, separates from the full model. On the other hand, the Parget and Ardema model almost reproduces the full model results, leading to a clear image of the physics involved: the best range comes from maximizing the product of the propeller and aerodynamic efficiencies with respect to the velocity, which determines the optimal arc.


  • Open Access

    Station-keeping HAPS mission through optimal sprint and drift trajectories

    by Adrián Delgado, Diego Domínguez, Jesús Gonzalo, Alberto Escapa