SRSimon Kristopher Roy

Simon Kristopher Roy

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Simon Kristopher Roy has a total of 68 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Considerations for Developing DNA-Templated Dye-Aggregate Systems

    by Simon Kristopher Roy

    Molecular excitons have been the subject of significant research interest for nearly 100 years. Molecular excitons arise when conjugated organic molecules (dyes) are excited such that the resulting excitation is delocalized over multiple dyes in a wavelike manner. The shared excited states that allow the excitation energy to hop between molecules is of particular interest for applications that can make use of the wavelike properties of excitons, including applications in quantum information science. A key challenge for developing materials for these advanced applications is to overcome the knowledge gaps associated with precisely templating dyes with spatial control of their aggregation, separation, and orientation, which are critical factors that determine the optical response of a dye network. Deoxyribonucleic acid (DNA) has emerged as a powerful tool to self-assemble nanostructures that enables the incorporation of multitudes of substituents—including dye molecules—that affords fine control of attachments at atomic scales. Although DNA has been used to successfully induce aggregation of dyes—resulting in excitonic coupling and delocalized excitons in groups of dyes (aggregates)—much remains to be learned to gain full control of dye placement and relative orientation. Progress toward advance excitonic materials requires that we explore and understand the behavior and interactions of the dyes, the DNA template, and the interplay between the components of the system (e.g., dye-dye and DNA-dye interactions) that determine the final state of the system and resulting properties. A deep understanding of the system will lead to design rules and considerations that will allow further advances. In this work, two distinct paths are explored that each contribute to the foundational knowledge necessary to advance our understanding of assembling exciton-based materials. In Chapter 2, the materials system was designed to directly control dye placement and orientation by linking dyes to DNA duplexes with two short linkers to restrict their movement. The dyes were templated in this way—between consecutive nucleosides—along a linear duplex to create aggregates with up to four dyes. Further, the DNA was fortified with synthetic “bridged” nucleic acids that include an additional covalent bridge across the ribose sugar in the DNA backbone that should increase hybridization affinity (and thermal stability) and suppress a degree of freedom of the DNA backbone. This work concluded that the insertion of dyes by two-linker insertion disrupted the stability of the duplex; however, the fortification imparted by the bridged nucleic acids mitigated the instability to some degree. Chapter 3 explores a different approach to system design. In contrast to restricting dyes via multiple short linkers and fortifying the DNA to be more rigid, in this work the dyes were allowed to explore a much larger volume of space around their attachments enabled by a single—relatively long—flexible linker that enables the dyes to find their most favorable interaction with the DNA template. In this system, the disruption to the DNA caused by including dyes is minimized—relative to the two-linker approach of Chapter 2—by the expansion of the DNA template to include two DNA double helices coupled by two crossover junctions in a double-crossover (DX) tile motif. Beyond the additional stability imparted by the design, the DX tile motif has the added benefit of being well-studied as a modular building block to build up arbitrary structures via “sticky-end” assembly. The modular nature of the tile makes it an ideal platform to design modular components for future excitonic devices. To this end, a comprehensive system-level approach is presented for templating di-chloro-squaraine (SQ-Cl_2) dyes using the DX tile motif. The analysis included a broad survey of monomer and aggregate designs and proceeded with a deeper look at several constructs of interest. Of particular note was the characterization of novel, double-tile constructs housing strongly coupled dye aggregates and elucidation of the assembly details leading to their formation. Importantly, we observed that dye-dye interactions directly participated in the self-assembly process. In addition to these insights, this work also demonstrated that exciton delocalization—an important behavior for applications of molecular excitons—can be preserved after transfer from liquid to solid phase. This holistic system-level analysis led to a collection of observations, insights, and design rules that will be broadly applicable to develop future DNA-dye systems.

  • Control of Indodicarbocyanine Dimer Geometry Using Variable-Length Linkers to DNA Scaffolds

    by Adam A. Meares, Sara R. Ansteatt, Sebastián A. Díaz, Young C. Kim, Paul D. Cunningham, Smriti Thomas, Victoria Segal, Angelica Rose Galvan, Gissela Pascual, Simon K. Roy, et al.

    In recent years, DNA scaffolds have been utilized to organize dye molecules into aggregates with tailored optical and photophysical properties. While dye separation can be controlled with nanometer-scale accuracy, controlling the relative dye orientation in an aggregate on DNA remains challenging. In this work, we investigate varying the length of the two-point linker between indodicarbocyanine (Cy5) dyes and the DNA template as a method to better control the resulting dimer geometry. To test this approach, we synthesize Cy5 with either 2-carbon or 4-carbon two-point linkers and compare their behavior to commercially available Cy5 with 3-carbon two-point linkers. Using experimental spectroscopy, theoretical modeling, and molecular dynamics simulations, we demonstrate that shortening the linker from 3-carbon to 2-carbon limits the π-π interactions between dyes, thereby promoting the formation of J-like Cy5 dimers. Conversely, increasing the linker length provides the dye more freedom of motion, allowing greater π-π interactions and yielding dimers with greater H-like character. Furthermore, shorter linkers can restrict dye accessible volume, which, under the driving force of π-π interactions, suppresses heterogeneity in dye packing for specific placements of Cy5 on double stranded DNA and DNA Holliday junction scaffolds. These results emphasize the importance of dye linker chemistry in determining important optical and photophysical properties of DNA-scaffolded dye aggregates. They also suggest that tuning the length of the dye linker is an effective strategy to overcome two challenges that currently limit DNA-scaffolded dye aggregates in photonics applications: gaining control of dye aggregate geometry and suppressing heterogeneity in dye packing.


  • Open Access

    Tunable and robust optical and structural properties of a cooperative squaraine-dye aggregate-DNA DX-DAE tile system

    by Simon K. Roy, Nolan Olaso, Paul H. Davis, Olga A. Mass, Keitel Cervantes-Salguero, Jeunghoon Lee, Ryan D. Pensack, John A. Hall, Bernard Yurke, William B. Knowlton

    Molecular excitons, which are excitations delocalized over multiple dyes in a wavelike manner, are of interest for a wide range of applications, including quantum information science. Numerous studies have templated a variety of synthetic dyes via a DNA scaffold to induce dye aggregation to create molecular excitons upon photoexcitation. Dye aggregate optical properties are critically dependent on relative dye geometry and local environment; therefore, an understanding of dye–dye and DNA–dye interactions is critical for advancing toward more complex DNA–dye systems. The extensively studied DNA Holliday junction (HJ) and less-studied double-crossover (DX) tile motif are fundamental test beds for designing complex and ultimately modular DNA–dye architectures. Here, we report the first study of single-linked squaraine dye aggregation and exciton delocalization on a larger and more stable (compared with the HJ) DX tile motif. We first highlight a few DNA–dye constructs that support single dyes and aggregates with distinct optical properties that are both tunable—through sample design, buffer conditions, and heat treatment—and robust to environment changes, including transfer to solid phase. Next, we assess several experimental and design considerations that demonstrate directed dye-driven assembly of a novel double-tile DNA configuration. Our results demonstrate that single-linked squaraine dyes templated to DX tiles provide a viable research path to design and evaluate dye aggregate networks that support exciton delocalization. We include herein the first report of exciton delocalization in the solid phase in a DNA–dye construct. Additionally, our findings indicate that dye aggregation impacts the assembly of the DNA–dye construct, and, in some cases, thereby cooperates with the DNA to determine a final robust system configuration. Finally, we show that a controlled annealing schedule can be employed to promote the homogeneous assembly of DNA–dye constructs. The findings in this study contribute to the understanding of DNA–dye systems and the relevant factors involved in their directed assembly to achieve specific constructs with desirable properties.


  • Overcoming aggregation-induced quenching in DNA-assembled rhodamine dimers

    by Paul Cavanaugh, Simon K. Roy, Austin Biaggne, Maia Ketteridge, Matthew S. Barclay, Ryan Rau, Jeunghoon Lee, Paul H. Davis, William B. Knowlton, Bernard Yurke, et al.

    We use DNA to assemble rhodamine dimers that overcome aggregation-induced quenching. Our work provides guidance on a grand challenge in molecular excitonics and provides clarity on several common misconceptions in the field.


  • Distinguishing packing configurations of molecular dimers using excited-state absorption peaks in two-dimensional electronic spectra

    by Matthew S. Barclay, Paul D. Cunningham, Gissela Pascual, Simon K. Roy, Lance K. Patten, Kimihiro Susumu, Veronica R. Policht, Divita Mathur, Adam Meares, Jeunghoon Lee, et al.

    Packing conformations of molecular aggregates are known to strongly influence the locations and intensities of spectral peaks. Here, we develop the third-order nonlinear spectroscopy signals for a purely electronic model of a molecular dimer, which is a prototype aggregate system. The model—which focuses on excited-state absorption (ESA) pathways in two-dimensional electronic spectra—reveals that orientational averaging leads to diagnostic ESA peak locations for H- and J-dimers. We constructed DNA-templated dimers of cyanine molecules as representative systems and used ultrabroadband two-dimensional electronic spectroscopy measurements to support the predicted signatures arising from the theoretical model. Fitting of steady-state spectra supports the assigned packing conformations. The results elucidate how ESA peaks can be diagnostic spectral signatures of packing conformation. This work lays the foundation for future studies that can include the complicating effects of vibronic states and additional electronic levels.


  • Open Access

    Site-specific photo-crosslinking in a double crossover DNA tile facilitated by squaraine dye aggregates: advancing thermally stable and uniform DNA nanostructures

    by Shibani Basu, Simon K. Roy, Mandeep Sharma, German Barcenas, Bernard Yurke, William B. Knowlton, Jeunghoon Lee

    We investigated the role of dichloro-squaraine (SQ) dye aggregates in facilitating thymine–thymine interstrand photo-crosslinking of double crossover (DX) tiles to improve the thermal and structural stability of two-dimension DNA-based nanostructures.


  • Open Access

    Towards tunable exciton delocalization in DNA Holliday junction-templated indodicarbocyanine 5 (Cy5) dye derivative heterodimers

    by Gissela Pascual, Sebastián A. Díaz, Simon K. Roy, Adam Meares, Matthew Chiriboga, Kimihiro Susumu, Divita Mathur, Paul D. Cunningham, Igor L. Medintz, Bernard Yurke, et al.

    We studied the exciton delocalization of indodicarbocyanine 5 dye derivative (Cy5-R) heterodimers templated by a DNA Holliday junction (HJ), which was quantified by the exciton hopping parameter Jm,n.


  • Open Access

    Effect of hydrophilicity-imparting substituents on exciton delocalization in squaraine dye aggregates covalently templated to DNA Holliday junctions

    by Gissela Pascual, Simon K. Roy, German Barcenas, Christopher K. Wilson, Keitel Cervantes-Salguero, Olena M. Obukhova, Alexander I. Krivoshey, Ewald A. Terpetschnig, Anatoliy L. Tatarets, Lan Li, et al.

    Molecular aggregates exhibit emergent properties, including the collective sharing of electronic excitation energy known as exciton delocalization, that can be leveraged in applications such as quantum computing, optical information processing, and light harvesting. In a previous study, we found unexpectedly large excitonic interactions (quantified by the excitonic hopping parameter Jm,n) in DNA-templated aggregates of squaraine (SQ) dyes with hydrophilic-imparting sulfo and butylsulfo substituents. Here, we characterize DNA Holliday junction (DNA-HJ) templated aggregates of an expanded set of SQs and evaluate their optical properties in the context of structural heterogeneity. Specifically, we characterized the orientation of and Jm,n between dyes in dimer aggregates of non-chlorinated and chlorinated SQs. Three new chlorinated SQs that feature a varying number of butylsulfo substituents were synthesized and attached to a DNA-HJ via a covalent linker to form adjacent and transverse dimers. Various characteristics of the dye, including its hydrophilicity (in terms of log Po/w) and surface area, and of the substituents, including their local bulkiness and electron withdrawing capacity, were quantified computationally. The orientation of and Jm,n between the dyes were estimated using a model based on Kühn–Renger–May theory to fit the absorption and circular dichroism spectra. The results suggested that adjacent dimer aggregates of all the non-chlorinated and of the most hydrophilic chlorinated SQ dyes exhibit heterogeneity; that is, they form a mixture of dimers subpopulations. A key finding of this work is that dyes with a higher hydrophilicity (lower log Po/w) formed dimers with smaller Jm,n and large center-to-center dye distance (Rm,n). Also, the results revealed that the position of the dye in the DNA-HJ template, that is, adjacent or transverse, impacted Jm,n. Lastly, we found that Jm,n between symmetrically substituted dyes was reduced by increasing the local bulkiness of the substituent. This work provides insights into how to maintain strong excitonic coupling and identifies challenges associated with heterogeneity, which will help to improve control of these dye aggregates and move forward their potential application as quantum information systems.


  • Enhanced Photo-Cross-Linking of Thymines in DNA Holliday Junction-Templated Squaraine Dimers

    by Shibani Basu, Simon K. Roy, German Barcenas, Lan Li, Bernard Yurke, William B. Knowlton, Jeunghoon Lee

    Programmable self-assembly of dyes using DNA templates to promote exciton delocalization in dye aggregates is gaining considerable interest. New methods to improve the rigidity of the DNA scaffold and thus the stability of the molecular dye aggregates to encourage exciton delocalization are desired. In these dye-DNA constructs, one potential way to increase the stability of the aggregates is to create an additional covalent bond via photo-cross-linking reactions between thymines in the DNA scaffold. Specifically, we report an approach to increase the yield of photo-cross-linking reaction between thymines in the core of a DNA Holliday junction while limiting the damage from UV irradiation to DNA. We investigated the effect of the distance between thymines on the photo-cross-linking reaction yields by using linkers with different lengths to tether the dyes to the DNA templates. By comprehensively evaluating the photo-cross-linking reaction yields of dye-DNA aggregates using linkers with different lengths, we conclude that interstrand thymines tend to photo-cross-link more efficiently with short linkers. A higher cross-linking yield was achieved due to the shorter intermolecular distance between thymines influenced by strong dye-dye interactions. Our method establishes the possibility of improving the stability of DNA-scaffolded dye aggregates, thereby expanding their use in exciton-based applications such as light harvesting, nanoscale computing, quantum computing, and optoelectronics.


  • Open Access

    Electronic Structure and Excited-State Dynamics of DNA-Templated Monomers and Aggregates of Asymmetric Polymethine Dyes

    by Katelyn M. Duncan, Hannah M. Byers, Madaline E. Houdek, Simon K. Roy, Austin Biaggne, Matthew S. Barclay, Lance K. Patten, Jonathan S. Huff, Donald L. Kellis, Christopher K. Wilson, et al.

    Aggregates of conjugated organic molecules (i.e., dyes) may exhibit relatively large one- and two-exciton interaction energies, which has motivated theoretical studies on their potential use in quantum information science (QIS). In practice, one way of realizing large one- and two-exciton interaction energies is by maximizing the transition dipole moment (μ) and difference static dipole moment (Δd) of the constituent dyes. In this work, we characterized the electronic structure and excited-state dynamics of monomers and aggregates of four asymmetric polymethine dyes templated via DNA. Using steady-state and time-resolved absorption and fluorescence spectroscopy along with quantum-chemical calculations, we found the asymmetric polymethine dye monomers exhibited a large μ, an appreciable Δd, and a long excited-state lifetime (τp). We formed dimers of all four dyes and observed that one dye, Dy 754, displayed the strongest propensity for aggregation and exciton delocalization. Motivated by these results, we undertook a more comprehensive survey of Dy 754 dimer and tetramer aggregates using steady-state absorption and circular dichroism spectroscopy. Modeling these spectra revealed an appreciable excitonic hopping parameter (J). Lastly, we used femtosecond transient absorption spectroscopy to characterize τp of the dimer and tetramer, which we observed to be exceedingly short. This work revealed that asymmetric polymethine dyes exhibited μ, Δd, monomer τp, and J values promising for QIS; however, further work is needed to overcome excited-state quenching and achieve long aggregate τp.