Vincenzo Cappello
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Vincenzo Cappello has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Pingping Sun
Energy Systems and Infrastructure Assessment Division, Argonne National Laboratory, 9700 South Cass Avenue, Lemont, Illinois 60439, United States
4 shared publications - Amgad Elgowainy
Argonne National Laboratory
3 shared publications - Clarence Ng
Energy Systems and Infrastructure Analysis Division Argonne National Laboratory Lemont Illinois USA
2 shared publications - Guiyan Zang
MIT Energy Initiative, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, MA 02139, USA
2 shared publications - Hernan E. Delgado
Argonne National Laboratory
2 shared publications Jason Marcinkoski
2 shared publications
Latest Publications
- 28 June 2024
- Published by Elsevier in Gas Science and Engineering
- Vol. 128
Blending low-carbon hydrogen with natural gas: Impact on energy and life cycle emissions in natural gas pipelines
- 28 June 2024
- Published by Elsevier in Gas Science and Engineering
- Vol. 128
Blending low-carbon hydrogen with natural gas: Impact on energy and life cycle emissions in natural gas pipelines
- Open Access
- 5 May 2023
- Published by Elsevier in Journal of CO2 Utilization
- Vol. 72
Techno-economic analysis and life cycle analysis of e-fuel production using nuclear energy
- 5 May 2023
- Published by Elsevier in Journal of CO2 Utilization
- Vol. 72
Open AccessTechno-economic analysis and life cycle analysis of e-fuel production using nuclear energy
- 4 August 2022
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 24 (16) , 6306-6318
Conversion of plastic waste into high-value lubricants: techno-economic analysis and life cycle assessment
Given the low recycling rate of plastic waste in the United States due to low economic incentives, it is of great interest to develop a technology to upgrade plastic waste with favorable economics. Plastic upcycling to valuable chemicals could ensure a circular economy for plastics and reduce the environmental burden caused by their end use cycle and disposal. A conceptual facility to convert 250 metric ton (MT) per day of plastic waste was modeled; the main product was a high-quality liquid (HQL) with a similar performance to polyalphaolefin (PAO) lubricants. The modeled process had a lubricant yield of up to 90% based on the experimental results at the laboratory scale. Techno-economic analysis (TEA) and life cycle assessment (LCA) were also performed to evaluate the process economics and its environmental impact. By using a mixture of colored and natural high-density polyethylene (HDPE), the production cost was in the range of $0.6–$1.98 per kg of lubricant, depending on the operating conditions. The life cycle emissions were in the range of 0.48–1.2 kg CO2e kgLub −1 showing, for the best case scenario, a 52% reduction relative to the emissions for petroleum lubricants, and a 74% reduction relative to the emissions for PAO lubricants. The impacts of the lubricant yield, the catalyst amount, and reaction time were evaluated, and their effect on the final production cost was discussed.
- 4 August 2022
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 24 (16) , 6306-6318
Conversion of plastic waste into high-value lubricants: techno-economic analysis and life cycle assessment
Given the low recycling rate of plastic waste in the United States due to low economic incentives, it is of great interest to develop a technology to upgrade plastic waste with favorable economics. Plastic upcycling to valuable chemicals could ensure a circular economy for plastics and reduce the environmental burden caused by their end use cycle and disposal. A conceptual facility to convert 250 metric ton (MT) per day of plastic waste was modeled; the main product was a high-quality liquid (HQL) with a similar performance to polyalphaolefin (PAO) lubricants. The modeled process had a lubricant yield of up to 90% based on the experimental results at the laboratory scale. Techno-economic analysis (TEA) and life cycle assessment (LCA) were also performed to evaluate the process economics and its environmental impact. By using a mixture of colored and natural high-density polyethylene (HDPE), the production cost was in the range of $0.6–$1.98 per kg of lubricant, depending on the operating conditions. The life cycle emissions were in the range of 0.48–1.2 kg CO2e kgLub −1 showing, for the best case scenario, a 52% reduction relative to the emissions for petroleum lubricants, and a 74% reduction relative to the emissions for PAO lubricants. The impacts of the lubricant yield, the catalyst amount, and reaction time were evaluated, and their effect on the final production cost was discussed.
- 1 January 2021
- Published by Elsevier in Chemical Engineering Science
- Vol. 229
Scale-up of aerated bioreactors: CFD validation and application to the enzyme production by Trichoderma reesei
- 1 January 2021
- Published by Elsevier in Chemical Engineering Science
- Vol. 229
Scale-up of aerated bioreactors: CFD validation and application to the enzyme production by Trichoderma reesei