Francesca Villa
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Francesca Villa has a total of 86 co-authors. Here are the top co-authors by number of shared publications:
- Elena Villa
CNR ICMATE, Lecco Unit, 23900 Lecco, Italy
15 shared publications - Francesca Passaretti
CNR ICMATE, Lecco Unit, 23900 Lecco, Italy
12 shared publications - Corrado Tomasi
Consiglio Nazionale delle Ricerche – Istituto della Materia Condensata e di Tecnologie per l’Energia (CNR-ICMATE Sede di Genova) Area della Ricerca di Genova, Genoa, Italy
3 shared publications - Adelaide Nespoli
Consiglio Nazionale delle Ricerche—Istituto di Chimica della Materia Condensata e di Tecnologie per l’Energia (CNR-ICMATE), via G. Previati 1/e, 23900 Lecco, Italy
2 shared publications - Carlo Fanciulli
Consiglio Nazionale delle Ricerche—Istituto di Chimica della Materia Condensata e di Tecnologie per l’Energia (CNR-ICMATE), via G. Previati 1/e, 23900 Lecco, Italy
2 shared publications - David Gracia
Instituto de Nanociencia y Materiales de Aragón (INMA), CSIC & Universidad de Zaragoza
2 shared publications
Latest Publications
- Open Access
Synergic Improvement of Elastocaloric Effect in Polycrystalline NiMnGaCo by Magneto-Mechanical Coupling
Among the ferromagnetic shape memory alloys (SMAs), Ni43Mn31Ga19Co7 (at%) alloys are well known as a promising ferromagnetic SMA (FeSMA) for magnetocaloric effect, and scientific interest has increased due to the possible exploitation of multicaloric function. This first example of multi-effect by coupling elastocaloric and magnetocaloric effect is still far from complete experimental validation, mainly due to the difficulty of testing conditions that require the simultaneous application of both fields. In this study, a low magnetic field (μ0H = 0.26 T and 0.56 T) is applied during elastocaloric deformation at different temperatures. Although the magnetic field values applied in this work are much lower than those usually considered in the magnetocaloric effect, the magnetic field improves the elastocaloric effect, increasing the total strain and reducing the critical stress and mechanical hysteresis. This synergic action allows us to obtain an increase in the ΔTad of about 13% and 25% upon loading and unloading, respectively.
Open AccessSynergic Improvement of Elastocaloric Effect in Polycrystalline NiMnGaCo by Magneto-Mechanical Coupling
Among the ferromagnetic shape memory alloys (SMAs), Ni43Mn31Ga19Co7 (at%) alloys are well known as a promising ferromagnetic SMA (FeSMA) for magnetocaloric effect, and scientific interest has increased due to the possible exploitation of multicaloric function. This first example of multi-effect by coupling elastocaloric and magnetocaloric effect is still far from complete experimental validation, mainly due to the difficulty of testing conditions that require the simultaneous application of both fields. In this study, a low magnetic field (μ0H = 0.26 T and 0.56 T) is applied during elastocaloric deformation at different temperatures. Although the magnetic field values applied in this work are much lower than those usually considered in the magnetocaloric effect, the magnetic field improves the elastocaloric effect, increasing the total strain and reducing the critical stress and mechanical hysteresis. This synergic action allows us to obtain an increase in the ΔTad of about 13% and 25% upon loading and unloading, respectively.
- Open Access
- 28 May 2026
- Published by Springer Nature in Journal of Materials Science
- Vol. 61 (27) , 19853-19865
Development and thermo-mechanical characterization of NiMnTi melt-spun ribbons
All-d-metal Heusler alloys, particularly NiMnTi-based alloys, have gained increasing attention due to their superior mechanical and caloric properties compared to traditional NiMn-based systems. These alloys exhibit robust metallic bonding, which enhances ductility and superelasticity, making them promising candidates for functional applications. Melt spinning is an effective method for producing polycrystalline NiMn-based thin ribbons; however, there remains a research gap concerning the functional and thermo-mechanical characterization of the benchmark NiMnTi alloy. The present study investigates the effects of the melt spinning process on the microstructural, structural, calorimetric, functional and mechanical properties of two NiMnTi alloys with Ti contents of 15 at.% and 18 at.%. The results suggest that wheel speed may play a relevant role in the development of residual stresses, thickness inhomogeneity and solidification defects in NiMnTi ribbons, thereby influencing their calorimetric, mechanical and functional properties. The potential elastocaloric response of NiMnTi ribbons is preliminarily investigated, highlighting the necessity of further improvements and optimization for potential future developments in mini- and microscale elastocaloric devices.
- 28 May 2026
- Published by Springer Nature in Journal of Materials Science
- Vol. 61 (27) , 19853-19865
Open AccessDevelopment and thermo-mechanical characterization of NiMnTi melt-spun ribbons
All-d-metal Heusler alloys, particularly NiMnTi-based alloys, have gained increasing attention due to their superior mechanical and caloric properties compared to traditional NiMn-based systems. These alloys exhibit robust metallic bonding, which enhances ductility and superelasticity, making them promising candidates for functional applications. Melt spinning is an effective method for producing polycrystalline NiMn-based thin ribbons; however, there remains a research gap concerning the functional and thermo-mechanical characterization of the benchmark NiMnTi alloy. The present study investigates the effects of the melt spinning process on the microstructural, structural, calorimetric, functional and mechanical properties of two NiMnTi alloys with Ti contents of 15 at.% and 18 at.%. The results suggest that wheel speed may play a relevant role in the development of residual stresses, thickness inhomogeneity and solidification defects in NiMnTi ribbons, thereby influencing their calorimetric, mechanical and functional properties. The potential elastocaloric response of NiMnTi ribbons is preliminarily investigated, highlighting the necessity of further improvements and optimization for potential future developments in mini- and microscale elastocaloric devices.
- Open Access
- 24 November 2025
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 13 (4) , 1973-1983
Towards nickel–titanium shape memory alloys for coatingless icephobic materials
This study introduces a nickel–titanium shape memory alloy as a durable, coatingless material with low ice adhesion for icephobic applications.
- 24 November 2025
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 13 (4) , 1973-1983
Open AccessTowards nickel–titanium shape memory alloys for coatingless icephobic materials
This study introduces a nickel–titanium shape memory alloy as a durable, coatingless material with low ice adhesion for icephobic applications.
- Open Access
Shape Memory Alloy Torsional Actuators Enabling Autonomous Thermal Control in Small Satellites
The aim of this study is to investigate the integration of Shape Memory Alloy (SMA) torque tubes into SmallSats’ thermal management systems to passively deploy radiator panels in an autonomous manner. Specific aspects of the investigation are related to material production, thermomechanical characterization, structural integration, and assessment of overall prototype functionalities. Implementation feasibility was evaluated through a 12U CubeSat test case. Starting with NiTi tubes ( at Ni.) intended for pseudoelastic applications, a combined aging and shape-setting heat treatment process was selected to achieve both SME characteristics and an S-shaped geometric configuration. Comprehensive material characterization was conducted using differential scanning calorimetry (DSC) and mechanical testing to evaluate post-treatment phase transformation temperatures (PTTs) and torsional load response. Experimental results demonstrated the actuator’s capacity to fully recover imposed rotations exceeding ° against resisting torques up to 0.1 Nm. Material cyclic stability analysis revealed rapid stabilization after four cycles, with maintained performance through 80 cycles. The experimental validation culminated in benchtop prototype testing, which achieved an ° deployment rotation, evidencing the viability of the proposed mechanism.Open AccessShape Memory Alloy Torsional Actuators Enabling Autonomous Thermal Control in Small Satellites
The aim of this study is to investigate the integration of Shape Memory Alloy (SMA) torque tubes into SmallSats’ thermal management systems to passively deploy radiator panels in an autonomous manner. Specific aspects of the investigation are related to material production, thermomechanical characterization, structural integration, and assessment of overall prototype functionalities. Implementation feasibility was evaluated through a 12U CubeSat test case. Starting with NiTi tubes ( at Ni.) intended for pseudoelastic applications, a combined aging and shape-setting heat treatment process was selected to achieve both SME characteristics and an S-shaped geometric configuration. Comprehensive material characterization was conducted using differential scanning calorimetry (DSC) and mechanical testing to evaluate post-treatment phase transformation temperatures (PTTs) and torsional load response. Experimental results demonstrated the actuator’s capacity to fully recover imposed rotations exceeding ° against resisting torques up to 0.1 Nm. Material cyclic stability analysis revealed rapid stabilization after four cycles, with maintained performance through 80 cycles. The experimental validation culminated in benchtop prototype testing, which achieved an ° deployment rotation, evidencing the viability of the proposed mechanism. - Open Access
- 10 September 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (18) , 1388
Sustainable Materials for Energy
The sustainable production of energy without environmental footprints is a challenge of paramount importance to satisfy the ever-increasing global demand and to promote economic and social growth through a greener perspective. Such awareness has significantly stimulated worldwide efforts aimed at exploring various energy paths and sources, in compliance with the ever more stringent environmental regulations. Research advancements in these fields are directly dependent on the design, fabrication, and implementation of tailored multi-materials for efficient energy production and harvesting and storage devices. Herein, we aim at providing a survey on the ongoing research activities related to various aspects of functional materials for energy production, conversion, and storage. In particular, we present the opportunities and the main open challenges related to multifunctional materials spanning from carbon-based nanostructures for chemical energy conversion, ferroelectric ceramics for energy harvesting, and phase change materials for thermal energy storage to metallic materials for hydrogen technologies, heat exchangers for wind energy, and amphiphobic coatings for the protection of solar panels. The relevance of designing tailored materials for power generation is also presented. Finally, the importance of applying life cycle assessment to materials is emphasized through the case study of AlTiN thin films.
- 10 September 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (18) , 1388
Open AccessSustainable Materials for Energy
The sustainable production of energy without environmental footprints is a challenge of paramount importance to satisfy the ever-increasing global demand and to promote economic and social growth through a greener perspective. Such awareness has significantly stimulated worldwide efforts aimed at exploring various energy paths and sources, in compliance with the ever more stringent environmental regulations. Research advancements in these fields are directly dependent on the design, fabrication, and implementation of tailored multi-materials for efficient energy production and harvesting and storage devices. Herein, we aim at providing a survey on the ongoing research activities related to various aspects of functional materials for energy production, conversion, and storage. In particular, we present the opportunities and the main open challenges related to multifunctional materials spanning from carbon-based nanostructures for chemical energy conversion, ferroelectric ceramics for energy harvesting, and phase change materials for thermal energy storage to metallic materials for hydrogen technologies, heat exchangers for wind energy, and amphiphobic coatings for the protection of solar panels. The relevance of designing tailored materials for power generation is also presented. Finally, the importance of applying life cycle assessment to materials is emphasized through the case study of AlTiN thin films.
- Open Access
- 22 July 2025
- Published by Springer Nature in Journal of Thermal Analysis and Calorimetry
- Vol. 150 (16) , 12937
Correction: On the evaluation of thermomechanical parameters for caloric investigation of NiMnGaCu polycrystalline alloy
- 22 July 2025
- Published by Springer Nature in Journal of Thermal Analysis and Calorimetry
- Vol. 150 (16) , 12937
Open AccessCorrection: On the evaluation of thermomechanical parameters for caloric investigation of NiMnGaCu polycrystalline alloy
- Open Access
- 7 May 2025
- Published by Wiley in Advanced Materials Technologies
- Vol. 10 (15)
Unraveling the Effects of Improved Cooling and Bias Force in the Actuation of a Shape‐Memory Soft Multimaterial Gripper
This study explores the enhancement of a soft actuator made from a NiTiCu6 Shape Memory Alloy (SMA) element embedded in a silicone rubber matrix functionalized with high aspect ratio graphene nanoparticles (GNPs). As a proof‐of‐concept we present the design, fabrication by stepwise molding, and testing of an operational soft gripper. Prototypes with the GNPs‐enriched matrix are compared with plain elastomer ones with two different Shore hardness to assess thermal and mechanical effects on the actuation speed and energetics. They are tested in grasp‐and‐release cycles and during prolonged grip maintenance at constant force at 1.5 N and 1 N. Input electric currents are also varied between 5 and 9A. With GNPs‐modified matrix, it is possible to speed up the release phase up to 40%, as the enhanced thermal diffusivity improves cooling rates, but it may also lead to increased energy consumption during low‐current activations and prolonged gripping phases. In particular, for the grasp‐and‐release cycles, a stiffer matrix also requires higher input energies without comparable improvements in cooling times. Our findings underscore the potential for tailoring matrix properties to improve the overall functionality of SMA‐based soft actuators, setting the stage for future work to refine performance through further material optimization and expanded testing scenarios.
- 7 May 2025
- Published by Wiley in Advanced Materials Technologies
- Vol. 10 (15)
Open AccessUnraveling the Effects of Improved Cooling and Bias Force in the Actuation of a Shape‐Memory Soft Multimaterial Gripper
This study explores the enhancement of a soft actuator made from a NiTiCu6 Shape Memory Alloy (SMA) element embedded in a silicone rubber matrix functionalized with high aspect ratio graphene nanoparticles (GNPs). As a proof‐of‐concept we present the design, fabrication by stepwise molding, and testing of an operational soft gripper. Prototypes with the GNPs‐enriched matrix are compared with plain elastomer ones with two different Shore hardness to assess thermal and mechanical effects on the actuation speed and energetics. They are tested in grasp‐and‐release cycles and during prolonged grip maintenance at constant force at 1.5 N and 1 N. Input electric currents are also varied between 5 and 9A. With GNPs‐modified matrix, it is possible to speed up the release phase up to 40%, as the enhanced thermal diffusivity improves cooling rates, but it may also lead to increased energy consumption during low‐current activations and prolonged gripping phases. In particular, for the grasp‐and‐release cycles, a stiffer matrix also requires higher input energies without comparable improvements in cooling times. Our findings underscore the potential for tailoring matrix properties to improve the overall functionality of SMA‐based soft actuators, setting the stage for future work to refine performance through further material optimization and expanded testing scenarios.
- Open Access
- 18 April 2025
- Published by Springer Nature in Journal of Thermal Analysis and Calorimetry
- Vol. 150 (10) , 7451-7460
On the evaluation of thermomechanical parameters for caloric investigation of NiMnGaCu polycrystalline alloy
Ferromagnetic shape memory alloys have received much attention for their multicaloric effect, in particular for their magnetocaloric/elastocaloric synergic coupling. Among them, NiMnGaCu alloys represent one of the most promising systems in terms of high magnetocaloric entropy change values. Our previous studies were addressed to assess the effect of microstructure on the elastocaloric effect. In the present work, a critical comparison among experimental data from different methodologies, i.e. DSC, adiabatic calorimetry under magnetic field, magnetization and thermomechanical measurements is made. The different approaches are discussed in terms of experimental and theoretical critical aspects.
- 18 April 2025
- Published by Springer Nature in Journal of Thermal Analysis and Calorimetry
- Vol. 150 (10) , 7451-7460
Open AccessOn the evaluation of thermomechanical parameters for caloric investigation of NiMnGaCu polycrystalline alloy
Ferromagnetic shape memory alloys have received much attention for their multicaloric effect, in particular for their magnetocaloric/elastocaloric synergic coupling. Among them, NiMnGaCu alloys represent one of the most promising systems in terms of high magnetocaloric entropy change values. Our previous studies were addressed to assess the effect of microstructure on the elastocaloric effect. In the present work, a critical comparison among experimental data from different methodologies, i.e. DSC, adiabatic calorimetry under magnetic field, magnetization and thermomechanical measurements is made. The different approaches are discussed in terms of experimental and theoretical critical aspects.
- Open Access
- 12 August 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (7)
Magneto-mechanical coupling in ferromagnetic shape memory alloys: Mechanical experimental investigation under magnetic field in NiMnGaCu alloy
Ferromagnetic shape memory alloys attracted increasing interest as multicaloric materials for solid state refrigeration. The most effective field coupling is achieved through the combination of the magnetic and mechanical induction of thermoelastic martensitic transformation. In the present work, we present an experimental investigation on NiMnGaCu polycrystalline cast alloy, by means of an experimental setup for compression tests in isothermal conditions under a longitudinal magnetic field. The setup has been ad hoc designed and developed specifically for this purpose. In this way, we can measure the elastocaloric and magnetocaloric effect at the same time. Moreover, the evolution of the entropy changes ΔS and the functional caloric parameters vs the magnetic field is evaluated. The application of magnetic field seems to act like a supplementary mechanical longitudinal stress. These preliminary results are fundamental to achieve a comprehensive understanding and modeling of coupled multicaloric phenomena.
- 12 August 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (7)
Open AccessMagneto-mechanical coupling in ferromagnetic shape memory alloys: Mechanical experimental investigation under magnetic field in NiMnGaCu alloy
Ferromagnetic shape memory alloys attracted increasing interest as multicaloric materials for solid state refrigeration. The most effective field coupling is achieved through the combination of the magnetic and mechanical induction of thermoelastic martensitic transformation. In the present work, we present an experimental investigation on NiMnGaCu polycrystalline cast alloy, by means of an experimental setup for compression tests in isothermal conditions under a longitudinal magnetic field. The setup has been ad hoc designed and developed specifically for this purpose. In this way, we can measure the elastocaloric and magnetocaloric effect at the same time. Moreover, the evolution of the entropy changes ΔS and the functional caloric parameters vs the magnetic field is evaluated. The application of magnetic field seems to act like a supplementary mechanical longitudinal stress. These preliminary results are fundamental to achieve a comprehensive understanding and modeling of coupled multicaloric phenomena.
- Open Access
- 3 May 2024
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 30, 5582-5589
A novel sintering method for polycrystalline NiMnGa production for elastocaloric applications
- 3 May 2024
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 30, 5582-5589
Open AccessA novel sintering method for polycrystalline NiMnGa production for elastocaloric applications