Yang Wang

This paper focuses on the development and experimental validation of a single-phase modular multilevel converter (MMC) based on a battery energy storage system (BESS) for residential uninterruptible power supply (UPS) with two-level active SoC balancing control. The configuration and mathematical modeling of the single-phase MMC-BESS are first presented, followed by the details of the control strategies, including dual-loop output voltage and current control in islanded mode, grid-connected control, circulating current control, and two-level active state-of-charge (SoC) balancing control. The design and optimization of the quasi-proportional-resonant (QPR) controllers were investigated by using particle swarm optimization (PSO). Simulation models were built to explore the operating characteristics of the UPS under islanded mode with an RL load and grid-connected mode and assess the control performance. A 500 W experimental prototype was developed and is herein presented, including results under different operating conditions of the MMC-BESS. The experimental results show that for both RL load and grid-connected tests, balancing was achieved. The response time to track the reference value was two grid periods (0.04 s). In the islanded mode test, the THD was 1.37% and 4.59% for the voltage and current, respectively, while in the grid-connected mode test, these values were 1.72% and 4.24% for voltage and current, respectively.

Modular multilevel converters (MMCs) with integrated battery energy storage systems (BESSs) are becoming crucial for modern power grids. This paper investigates the modeling and control of a grid-connected MMC-BESS, with a specific emphasis on state-of-charge (SoC) balancing. Compared to conventional hard arm SoC balancing control (HASBC), this paper proposes an alternative soft arm SoC balancing control (SASBC). The simulation results and analysis indicate the following: 1. SASBC provides superior performance in achieving SoC balance both between and within the arms, as compared to HASBC. 2. The MMC-BESS power fluctuates between phases, arms, and individual submodules to balance the SoC of batteries. After the accomplishment of SoC equalization, the power is equally distributed, and the circulating current is well eliminated. 3. MMC-BESS can operate in both the charging and discharging modes, and the total harmonic distortion (THD) of the output current is reduced from 6.80% to 1.13% after SoC balancing is achieved. 4. A robustness test shows the control system’s effective performance in handling component variations.

A modular multilevel converter (MMC) is an advanced voltage source converter applicable to a wide range of medium and high-voltage applications. It has competitive advantages such as quality output performance, high modularity, simple scalability, and low voltage and current rating demand for the power switches. Remarkable studies have been carried out regarding its topology, control, and operation. The main purpose of this review is to present the current state of the art of the MMC technology and to offer a better understanding of its operation and control for stationary applications. In this study, the MMC configuration is presented regarding its conventional and advanced submodule (SM) and overall topologies. The mathematical modeling, output voltage, and current control under different grid conditions, submodule balancing control, circulating current control, and modulation methods are discussed to provide the state of the MMC technology. The challenges linked to the MMC are associated with submodule balancing control, circulating current control, control complexity, and transient performance. Advanced nonlinear and predictable control strategies are expected to improve the MMC control and performance in comparison with conventional control methods. Finally, the power losses associated with the advanced wide bandgap (WBG) power devices (such as SiC, GaN) are explored by using different modulation schemes and switching frequencies. The results indicate that although the phase-shifted carrier-based pulse width modulation (PSC-PWM) has higher power losses, it outputs a better quality voltage with lower total harmonic distortion (THD) in comparison with phase-disposition pulse width modulation (PD-PWM) and sampled average modulation pulse width modulation (SAM-PWM). In addition, WBG switches such as silicon carbide (SiC) and gallium nitride (GaN) devices have lower power losses and higher efficiency, especially at high switching frequency in the MMC applications.

Multi-level relay routing is widely applied in power line communication, both the physical layer and routing strategy performance relies on power line communication channel between different nodes. The conventional point-to-point power line channel model is no longer fit for system performance test. Based on the two-port model, this paper proposes a multi-node broadband power line channel modeling method. In the proposed method, the low voltage power line network is divided into sub-networks. This method can calculate the power line channel frequency response between any two terminals of the low-voltage distribution network. The comparison between the measured channel response and the theoretical simulation results shows that the proposed method can accurately describe the multi-node power line channels and the correlation characteristics between different channels.