FLFanxing Li

Fanxing Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Fanxing Li has a total of 389 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Breaking the Equilibrium Yield Limit of Methane Aromatization Using Tandem Chemical Looping Catalysis

    by Fanxing Li, Ibrahim Sultan, Baitang Jin, Zhenhua Xie, Md Emdadul Haque, Ashley Caiola, Jianli Hu, Debangsu Bhattacharyya, Luke Neal, Jingguang Chen

    The direct conversion of methane to aromatics offers a promising route for liquefying natural gas and biogas, thereby generating higher-value chemicals and reducing transportation costs. However, conventional methane dehydroaromatization (MDA) is severely hindered by thermodynamic limitations, high temperature requirements, and catalyst instability. Here, we report a tandem chemical looping catalysis strategy that integrates chemical looping oxidative coupling of methane (CL-OCM) with dehydroaromatization (DHA), overcoming these challenges. The CL-OCM route generates more readily convertible C2+ intermediates while consuming hydrogen, the equilibrium-limiting byproduct, as water. This shifts the equilibrium and renders the overall reaction exothermic, achieving a single-pass aromatic yield of 27.1%, 2.5 to 3 times the single-pass yields of conventional MDA. Independent regeneration of the two catalyst beds maintains stable performance over repeated reaction-regeneration cycles. Process analysis projects ~75% lower levelized costs and ~77% lower cradle-to-gate emissions than direct MDA.

  • Open Access

    Upcycling Cotton–Polyester Textile Waste Into High Quality Biochar and Activated Carbon for Energy Storage Applications

    by Sumon Reza, Alan Ferris, Shrabani De, Nate Tomas Garland, Seyedamin Razavi, Fanxing Li, Richard Venditti, Veronica Augustyn, Jesse Daystar, William Joe Sagues

    The rapid increase in textile waste generation from fast fashion and population growth calls for innovative waste management and valorization technologies. This study converts textile waste into high‐surface‐area carbon materials through a simple pyrolysis process and investigates the synergistic behavior of thermally decomposing woven cotton–polyester materials. Three waste types‐pure cotton, a 1:1 cotton–polyester blend, and pure polyester—were carbonized at 400, 500, and 600 °C with a slow heating rate (4 °C/min) under nitrogen. The cotton–polyester blend carbonized at 500 °C yielded the highest surface area (576 m 2 /g), outperforming cotton (197 m 2 /g) and polyester (287 m 2 /g). The optimized biochars were subsequently converted into activated carbons via KOH activation, significantly increasing their surface areas (2537 and 1129 m 2 /g for cotton‐ and cotton–polyester‐derived activated carbons, respectively). Electrochemical evaluation of these activated carbons revealed specific capacitances of 112 F/g for cotton‐derived activated carbon and 58.3 F/g for cotton–polyester‐derived activated carbon at 1 A/g. This work demonstrates a scalable approach to upcycle textile waste into high‐performance carbon materials, advancing circular economy initiatives and renewable energy storage technologies.

  • High-Throughput Exploration of Perovskite Oxides for Chemical Looping Air Separation

    by Hilal Bektas, Kunran Yang, Anna Lawrence, Sarah Watson, Alessandro C. Dal Pra, Runxia Cai, Logan Newell, Fanxing Li

    The structural and operational flexibility of perovskite oxides makes them uniquely suited for chemical looping air separation. While prior work has largely focused on SrFeO3–δ type perovskites, the vast unexplored compositional space warrants a systematic investigation. Here, a rational approach to designing perovskite oxides with phase stability and oxygen storage capacity under thermodynamically favorable conditions is presented. Using a DFT (density functional theory)-based high-throughput model, 23,716 AxA′1–xByB′1–yO3–δ compositions are explored, and 193 candidates are predicted to be capable of spontaneous oxygen exchange under isothermal pressure swing conditions (0.2–0.01 atm O2) at 400 °C and 600 °C. Convex hull analysis with an Ehull threshold of 75 meV/atom further eliminates a substantial fraction of unstable compositions, notably reducing the experimental burden. Experimental validation confirms the phase stability and oxygen exchange ability of 8 sorbent compositions, including several previously unreported materials that would be difficult to identify through conventional empirical screening. The model also identifies Ca0.25Sr0.75Fe0.875Ni0.125O3–δ, which has exceptional oxygen capacity due to its ability to undergo phase transition at 400 °C under pressure swing. These findings highlight the effectiveness of our combinatorial approach and, together with a few potential improvements based on this study, can accelerate future material discoveries.

  • Open Access

    Investigations of Fe − MAl 2 O 4 ( M = Ca , Mg , Sr , Ba ) Catalysts for Catalytic Decomposition of Methane

    by Samuel B. Portillo, Joshua Sellers, Fanxing Li

    Catalytic decomposition of methane is a more sustainable alternative for hydrogen production compared to established technologies like steam methane reforming and coal gasification. This study reports iron-based catalysts supported on MAl 2 O 4 ( M = Ca , Mg , Sr , Ba ) prepared via a or one-pot modified Pechini () method. The synthesized catalysts were evaluated for their CDM performance in the range of 750–800 °C. In general, we show that ball-mill synthesis leads to higher CDM activities than sol-gel synthesized samples, which undergo quick deactivation. Raman spectroscopy and H 2 -TPR indicate that synthesizing the Fe − MAl 2 O 4 catalysts via the sol-gel method results in iron coordination with cations (i.e., M) and with alumina to decrease iron’s reducibility and its overall catalytic activity. For the ball-mill synthesized samples, we find that a 30 wt% Fe − CaAl 2 O 4 catalyst tested at optimized reaction conditions of T red = 700 ° C , T rxn = 750 ° C , y CH 4 = 0.9 , and GHSV = 1.25 L · g − 1 · h − 1 obtained a competitive carbon yield of 17.86 g C / g Fe ( 5.06 g C / g Cat ) . TEM and SEM of the spent product indicate that the carbon product forms primarily via a tip-growth mechanism, with both filamentous and nano-onion-type carbon being generated. Raman spectroscopy of the spent product determined most of the carbon formed on the ball-milled Fe − MAl 2 O 4 catalysts was graphitic in nature with I D / I G ratios ranging between 0.400 and 0.500. Overall, appears to be a simple yet effective strategy to prepare dispersed iron catalysts for CDM.

  • Mechanistic Investigation and Optimization of a Mixed-Oxide@Alkali Carbonate Redox Catalyst Platform for Enhanced Ethane Oxidative Dehydrogenation

    by Xijun Wang, Yunfei Gao, Christopher Chiedozie Obi, Junchen Liu, Fanxing Li

    Chemical looping oxidative dehydrogenation (CL-ODH) of ethane has emerged as a promising alternative for ethylene production, with the potential to mitigate the environmental and sustainability concerns associated with conventional steam cracking. The main challenge of CL-ODH is the design of active and selective redox catalysts to enhance ethane activation while minimizing the generation of by-products such as COx (CO and CO2). This study employs ab initio molecular dynamics (AIMD) simulations to investigate the formation and reactivity of oxygen species in mixed metal-oxides@Li2CO3 and Na2CO3 redox catalysts. Estimated reaction free energies are used as thermodynamic descriptors, while the computational insights are supplemented with experimental validations. Our analysis indicates that peroxide (O22–) and •OH radicals provide more favorable thermodynamic driving forces for ethane C–H activation at the outer carbonate surface than monatomic oxygen radical anion (O–) and superoxide (O2–). In addition, mechanistic investigations into COx formation reveal that the product water can interact with peroxide-derived species at the gas–carbonate interface to generate •OH radicals, consistent with prior experimental observations. In Li2CO3, •OH-mediated pathways retain favorable ethane C─H activation thermodynamics while reducing the driving force for selected COx-forming transformations relative to peroxide. These findings provide important mechanistic insights into the design and optimization of mixed-oxide@alkali carbonate core-shell redox catalysts for CL-ODH.

  • Chemical Looping Oxidative Dehydrogenation of Ethylbenzene in a 10 kg/Day Fixed-Bed Demonstration Unit: Long-Term Performance and Process-Economic Implications

    by Aaron Frye, Baitang Jin, Junchen Liu, Samuel Portillo, Ryan Sink, Luke Neal, Fanxing Li

    Chemical looping oxidative dehydrogenation (CL-ODH) has the potential to intensify styrene production by coupling ethylbenzene dehydrogenation with selective combustion of coproduct hydrogen using lattice oxygen of a mixed oxide-based oxygen carrier, but its scale-up behavior and catalyst durability remain uncertain. Here, we report catalyst optimization, design, and operation of an integrated fixed-bed demonstration unit with an ethylbenzene feed capacity of 10 kg/day, or approximately 5 kilowatts thermal (kWth), and an experimentally informed process-economic analysis. During lab-scale catalyst optimization, lanthanum substitution and alkali-molybdate promotion suppressed unselective oxidation in model dehydrogenation and selective hydrogen combustion (SHC) formulations. A 0.5 wt % K2MoO4-promoted industrial KFeOx-based dehydrogenation (DH) catalyst was selected for long-term operation for the purpose of an initial evaluation of the scalability of the process and the feasibility of using an established industrial DH catalyst in the CL-ODH processing scheme. The demonstration unit was operated for 1000 h over 1900 redox cycles at 575–625 °C. After an initial break-in period, ethylbenzene conversion decreased from 90.1% to 88.5%; however, styrene selectivity declined during extended cycling, resulting in an end-of-run (EOR) single-pass styrene yield of approximately 78% under the reference conditions. In situ addition of potassium precursors such as KOH, with or without a high-temperature oxidation treatment, recovered 4.1–5.1% of styrene yield on an absolute basis. Long-term operation also revealed issues such as an increasing reactor pressure drop resulting from agglomeration of the promoted industrial DH catalyst, identifying mechanical stability of the promoted commercial dehydrogenation catalyst as a scale-up risk, which can be resolved from advanced CL-ODH catalyst formulations. Process modeling projected start-of-run emissions of approximately 0.40 tonne of CO2 per tonne of styrene, compared with 0.72 tonne of CO2 per tonne for conventional dehydrogenation, while economic competitiveness is strongly affected by carbon loss to CO2 and coke, natural gas price, and the assumed value of avoided emissions. These results demonstrate important future directions for CL-ODH scale-up while highlighting its potential to achieve both favorable economics and lower CO2 emissions, especially in regions with high energy prices and/or strong incentives for CO2 emission reduction.

  • Influence of Acidic Sites and Cu Loading on Plasma-Catalytic CO2 Hydrogenation to Methanol

    by Miao Miao, Ehsanul Hoque, Yaolin Wang, Samuel B. Portillo, Yuge Yao, Mathew Jon Rasmussen, Calvin Mukarakate, Xin Tu, Fanxing Li

    Plasma-catalytic CO2 hydrogenation offers a promising route to methanol synthesis under near-ambient temperature and pressure by enabling nonequilibrium activation of CO2 and H2. However, the catalyst surface properties that govern methanol selectivity and yield under dielectric barrier discharge (DBD) plasma conditions remain insufficiently understood. Here, we investigate how support acidity and Cu functionality influence activity, selectivity, and surface reaction pathways over Cu-loaded silica–alumina catalysts. A series of silica–alumina supports containing 1–70 wt % SiO2 were evaluated under identical DBD plasma conditions. CO2 conversion and methanol formation exhibited a volcano-type dependence on silica content, with S30, a silica-alumina support containing 30 wt % SiO2, giving the highest single-pass methanol yield of 8.7% among the Cu-free supports. NH3 temperature-programmed desorption, CO2 temperature-programmed desorption, pyridine diffuse reflectance infrared Fourier transform spectroscopy, and acidity-perturbation experiments indicate that methanol formation is not governed by total acidity or CO2 uptake alone, but by a favorable acid environment combining predominantly Lewis acidity, relatively high medium-strength acid-site density, and low to moderate basicity. Introducing Cu increased both CO2 conversion and methanol selectivity across the silica–alumina series, while preserving S30 as the optimal support. Under optimized conditions, S30–5Cu achieved a single-pass methanol yield of approximately 12.4% at 30 °C and near-atmospheric pressure. In situ plasma-coupled Fourier transform infrared spectroscopy supports a surface pathway in which adsorbed carbonate or bicarbonate species are progressively hydrogenated to formate and methoxy-like intermediates prior to methanol formation. The optimized S30–5Cu catalyst maintained relatively stable performance over 30 h and showed slightly improved performance when the reactor size was more than doubled. These results establish support acidity and Cu-acid cooperation as key design parameters for selective plasma-catalytic CO2 hydrogenation to methanol.

  • Ca-Promoted Alumina for CO2 Capture and Combined Capture and Conversion

    by Seyedamin Razavi, Jack Hughes, Mahe Rukh, Samuel B. Portillo, Fanxing Li

    The development of efficient materials for CO2 capture and integrated capture and conversion processes is essential for advancing low-temperature carbon utilization technologies. In this work, CaO-modified γ-alumina sorbents were synthesized from boehmite precursors and systematically evaluated to elucidate the effects of calcination temperature and Ca loading on structural evolution and CO2 adsorption performance. Progressive dehydroxylation and phase transformation from boehmite to γ-alumina increased the density of strong Lewis acid–base pairs, while Ca incorporation further enhanced surface basicity and strengthened CO2 binding. Among the investigated materials, 15 wt % CaO/γ-alumina exhibited the highest CO2 uptake and the most thermally stable carbonate species, as confirmed by BET analysis, TGA, in situ FTIR, and XPS. Isosteric heat measurements indicated predominantly physisorptive behavior, with mild chemisorption emerging at higher Ca loadings. To enable combined capture and conversion, 5 wt % Ru was incorporated into the optimized sorbent to form a dual-function material (DFM). The resulting 5% Ru/15% CaO/γ-alumina demonstrated stable performance over ten consecutive CO2 adsorption-methanation cycles at 200 °C, maintaining 58.8–64.5% CH4 conversion with minimal deactivation. Importantly, the overlap between CO2 adsorption/desorption and methanation at the same temperature eliminates the need for thermal swings, providing a clear energy-efficiency advantage. Overall, the synergy between CaO-enhanced CO2 capture and Ru-catalyzed methanation establishes this material as a promising candidate for integrated CO2 capture and utilization.

  • Open Access

    Isothermal sorption-enhanced biomass gasification for hydrogen-rich syngas production using SrMnO3 redox-activated CO2 sorbents in a fluidized bed

    by Runxia Cai, Mahe Rukh, Andrew Jones, Leo Brody, Alexandra Pierce, Mahdi Niknam Shahrak, Stephen Kelly, Sunkyu Park, Fanxing Li


  • Supported Transition Metals for Catalytic Decomposition of Methane: Advances, Challenges, and Outlook

    by Samuel B. Portillo, Mohammadreza Kosari, Fanxing Li

    Methane pyrolysis represents a potentially cost-effective approach for CO2-free hydrogen production. This perspective comprehensively summarizes the current state of methane pyrolysis, specifically compiling carbon yields across a variety of metal–supported catalyst families, i.e., Ni, Co, Fe, and other bimetallic compositions, for comparison purposes. We further discuss carbon-growth mode and the productivity differences observed between tip-growth and base-growth systems based on existing data. Fundamental perspectives on methane activation and carbon transport mechanisms are reviewed in Ni-based systems and are further explored in Fe-based systems. Catalyst deactivation is discussed with respect to two dominant causes: rate imbalances in methane activation vs carbon diffusion and metal fragmentation. The state of the carbon market is given along with emphasis on potential challenges to identify suitable applications for carbon coproducts. Best practices for catalyst productivity reporting are also discussed to enhance comparability in future experimental studies.