Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mehreen Ahmed has a total of 39 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Agentic Modeling Framework for Materials‐to‐Device Cross‐Scale Design of Perovskite Solar Cells

    by Zhengzheng Dang, Tianle Liu, Huanhuan Niu, Honghao Ma, Yihua Liu, Zeyu Zhang, Mehreen Ahmed, Yuljae Cho, Chenchen Yuan, Yanming Wang

    Perovskite solar cells (PSCs) have progressed rapidly over the past decade. As the core functional layer, the intrinsic properties of perovskite materials, including band structure, carrier transport, and optical response, strongly influence PSC performance. Theoretical calculations support absorber screening and device‐performance prediction. However, most studies remain confined to either materials‐level investigation or device‐level evaluation, without a general framework linking microscopic material properties to macroscopic device performance. To address this gap, we develop a large language model (LLM)‐driven, materials‐to‐device cross‐scale agentic framework that establishes a closed‐loop workflow from first‐principles descriptor extraction to solar‐cell performance optimization. A Manager Agent coordinates density functional theory (DFT)‐based materials calculations, drift‐diffusion device simulation, and Bayesian optimization of PSC architectures. Through the model context protocol (MCP), 55 in‐house tools and analysis/simulation programs are encapsulated and orchestrated as callable skills, enabling human‐in‐the‐loop review, cross‐scale parameter transfer, task‐state control, simulation execution, provenance tracking, and error recovery. Across 24 multi‐turn sessions and 60 benchmark turns, the agent achieved a pass rate of 96.7%, significantly outperforming OpenClaw (60.0%). This work provides an extensible methodological route for traceable, auditable, and closed‐loop cross‐scale research on PSCs.

  • Open Access

    An Enhanced Water Quality Index for Water Quality Monitoring Using Remote Sensing and Machine Learning

    by Mehreen Ahmed, Rafia Mumtaz, Zahid Anwar

    Water quality deterioration is a serious problem with the increase in the urbanization rate. However, water quality monitoring uses grab sampling of physico-chemical parameters and a water quality index method to assess water quality. Both processes are lengthy and expensive. These traditional indices are biased towards the physico-chemical parameters because samples are only collected from certain sampling points. These limitations make the current water quality index method unsuitable for any water body in the world. Thus, we develop an enhanced water quality index method based on a semi-supervised machine learning technique to determine water quality. This method follows five steps: (i) parameter selection, (ii) sub-index calculation, (iii) weight assignment, (iv) aggregation of sub-indices and (v) classification. Physico-chemical, air, meteorological and hydrological, topographical parameters are acquired for the stream network of the Rawal watershed. Min-max normalization is used to obtain sub-indices, and weights are assigned with tree-based techniques, i.e., LightGBM, Random Forest, CatBoost, AdaBoost and XGBoost. As a result, the proposed technique removes the uncertainties in the traditional indexing with a 100% classification rate, removing the necessity of including all parameters for classification. Electric conductivity, secchi disk depth, dissolved oxygen, lithology and geology are amongst the high weighting parameters of using LightGBM and CatBoost with 99.1% and 99.3% accuracy, respectively. In fact, seasonal variations are observed for the classified stream network with a shift from 55:45% (January) to 10:90% (December) ratio for the medium to bad class. This verifies the validity of the proposed method that will contribute to water management planning globally.


  • Open Access

    A Multi–Step Approach for Optically Active and Inactive Water Quality Parameter Estimation Using Deep Learning and Remote Sensing

    by Mehreen Ahmed, Rafia Mumtaz, Zahid Anwar, Arslan Shaukat, Omar Arif, Faisal Shafait

    Water is a fundamental resource for human survival but the consumption of water that is unfit for drinking leads to serious diseases. Access to high–resolution satellite imagery provides an opportunity for innovation in the techniques used for water quality monitoring. With remote sensing, water quality parameter concentrations can be estimated based on the band combinations of the satellite images. In this study, a hybrid remote sensing and deep learning approach for forecasting multi–step parameter concentrations was investigated for the advancement of the traditionally employed water quality assessment techniques. Deep learning models, including a convolutional neural network (CNN), fully connected network (FCN), recurrent neural network (RNN), multi–layer perceptron (MLP), and long short term memory (LSTM), were evaluated for multi–step estimations of an optically active parameter, i.e., electric conductivity (EC), and an inactive parameter, i.e., dissolved oxygen (DO). The estimation of EC and DO concentrations can aid in the analysis of the levels of impurities and oxygen in water. The proposed solution will provide information on the necessary changes needed in water management techniques for the betterment of society. EC and DO parameters were taken as independent variables with dependent parameters, i.e., pH, turbidity, total dissolved solids, chlorophyll–α, Secchi disk depth, and land surface temperature, which were extracted from Landsat–8 data from the years 2014–2021 for the Rawal stream network. The bi–directional LSTM obtained better results with a root mean square error (RMSE) of 0.2 (mg/L) for DO and an RMSE of 281.741 (μS/cm) for EC, respectively. The results suggest that a hybrid approach provides efficient and accurate results in feature extraction and evaluation of multi–step forecast of both optically active and inactive water quality parameters.


  • Open Access

    Assessment of correlation amongst physico-chemical, topographical, geological, lithological and soil type parameters for measuring water quality of Rawal watershed using remote sensing

    by Mehreen Ahmed, Rafia Mumtaz, Shahbaz Baig, Syed Muhammad Hassan Zaidi

    The quality of water is traditionally assessed by the collection of physico-chemical parameters, i.e., pH, turbidity, dissolved oxygen of the water bodies. However, the variations in environmental factors may have an impact on the quality of water, as changes in these attributes may affect the water bodies. These factors include the topographical, geological, lithological and soil type parameters of the watershed. In this study, the relationship amongst the physico-chemical, topographical, geological, lithological and soil type parameters of the Rawal watershed was evaluated. The parameters included in the present study could be classified as follows: (a) water quality parameters (b) topographical parameters, (c) geological parameters, (d) lithological parameters, and (e) soil type parameters. Water quality parameters consisted of dissolved oxygen, pH, turbidity and temperature. The topographical parameters include the slope and aspect of the watershed while the lithological, geological and soil type parameters include the lithology, geology and soil type of the watershed. Pearson's correlation was used to determine the relationship amongst these different parameters. The results have revealed that the correlations of the topographical, lithological, geological parameters with the water quality parameters in the Rawal watershed for the monsoon seasons of June to August mostly have the same trend. Throughout the four-year time period, turbidity and temperature parameters had positive correlations with soil type (ranging 0.03–0.24), but however had weak correlation with geological and lithological parameters. Dissolved oxygen did not show any relationship with topographical and lithological parameters. The results for pH show that it has weak to fair positive correlations with topographical parameters. However, this analysis is based on the Landsat 8 images extracted for the monsoon seasons of the years 2017–2020, and to examine a more prominent impact of geographical or environmental factors on the physico-chemical features, a large dataset should be considered.


  • Open Access

    Distributed Fog Computing for Internet of Things (IoT) Based Ambient Data Processing and Analysis

    by Mehreen Ahmed, Rafia Mumtaz, Syed Mohammad Hassan Zaidi, Maryam Hafeez, Syed Ali Raza Zaidi, Muneer Ahmad

    Urban centers across the globe are under immense environmental distress due to an increase in air pollution, industrialization, and elevated living standards. The unmanageable and mushroom growth of industries and an exponential soar in population has made the ascent of air pollution intractable. To this end, the solutions that are based on the latest technologies, such as the Internet of things (IoT) and Artificial Intelligence (AI) are becoming increasingly popular and they have capabilities to monitor the extent and scale of air contaminants and would be subsequently useful for containing them. With centralized cloud-based IoT platforms, the ubiquitous and continuous monitoring of air quality and data processing can be facilitated for the identification of air pollution hot spots. However, owing to the inherent characteristics of cloud, such as large end-to-end delay and bandwidth constraint, handling the high velocity and large volume of data that are generated by distributed IoT sensors would not be feasible in the longer run. To address these issues, fog computing is a powerful paradigm, where the data are processed and filtered near the end of the IoT nodes and it is useful for improving the quality of service (QoS) of IoT network. To further improve the QoS, a conceptual model of distributed fog computing and a machine learning based data processing and analysis model is proposed for the optimal utilization of cloud resources. The proposed model provides a classification accuracy of 99% while using a Support Vector Machines (SVM) classifier. This model is also simulated in iFogSim toolkit. It affords many advantages, such as reduced load on the central server by locally processing the data and reporting the quality of air. Additionally, it would offer the scalability of the system by integrating more air quality monitoring nodes in the IoT network.


  • Spatiotemporal Clustering and Analysis of Road Accident Hotspots by Exploiting GIS Technology and Kernel Density Estimation

    by Syed Saqib Ali Kazmi, Mehreen Ahmed, Rafia Mumtaz, Zahid Anwar

    Traffic accidents are a common problem in any transportation network. Road traffic accidents are predicted to be the seventh leading cause of deaths by the year 2030. Recently research in the integration of geographical information systems (GIS) for analyzing accidents, road design and safety management has increased considerably. The perpetual use of GIS tools, lead this study to propose the identification of accident hotspots by exploiting GIS technology coupled with kernel density estimation (KDE). This paper proposes the use of KDE technique and GIS technology to automatically identify the accident hotspots using UK as the study area. Analysis shows that most of the accidents occur when there is a 30 mph speed limit, a weekend, in the evening time, during the months of October and November, on the single carriageway, where there is ‘T’ or staggered junction and on ‘A’ road class. Moreover, this study also proposed techniques to classify the accident severity that is classified as either fatal, serious or slight. The driver behavior and environmental features achieved an accuracy up to 85% on the severity classification with Bagging technique. Further, the shortcomings, limitations and recommendations for future work are also identified.


  • Auto-MeDiSine: an auto-tunable medical decision support engine using an automated class outlier detection method and AutoMLP

    by Maham Jahangir, Hammad Afzal, Mehreen Ahmed, Khawar Khurshid, Muhammad Faisal Amjad, Raheel Nawaz, Haider Abbas


  • Exploring nested ensemble learners using overproduction and choose approach for churn prediction in telecom industry

    by Mahreen Ahmed, Hammad Afzal, Imran Siddiqi, Muhammad Faisal Amjad, Khawar Khurshid


  • Improving handwriting based gender classification using ensemble classifiers

    by Mahreen Ahmed, Asma Ghulam Rasool, Hammad Afzal, Imran Siddiqi


  • MCS: Multiple classifier system to predict the churners in the telecom industry

    by Mehreen Ahmed, Imran Siddiqi, Hammad Afzal, Behram Khan

    Multiple classifiers for prediction or classification has gained popularity in recent years. Ensemble Technique perform best predictions as compared to traditional classifiers. This has resulted in the experimentation with new ways of ensemble creation. This paper presents a multiple classifier system (MCS) that can outperform traditional classifiers. Experiments are performed on a benchmark Customer Churn Dataset (available on UCI repository) and a newly created dataset from a South Asian wireless telecom operator. MCS achieved accuracies of 97% and 86% on the UCI churn dataset and private dataset, respectively. MCS as compared to existing best approaches realized the best results on the private and public datasets.