Seok Il Hong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Seok Il Hong has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Hee Dong Lee
Advanced Textile R&D Department, Korea institute of Industrial Technology (KITECH), Ansan 15588, Korea
6 shared publications - Woosung Lee
Safety Convergence Technology R&D Department, Korea Institute of Industrial Technology (KITECH), Ansan, Korea
3 shared publications - Jae Woong Jung
Department of Advanced Materials Engineering for Information & Electronics, Kyung Hee University, 1732 Deogyeong-daero, Giheung-gu, Yongin-si, Gyeonggi-do 446-701, Republic of Korea
2 shared publications - Jae Yun Shim
Advanced Textile R&D Department, Research Institute of Convergence Technology, Korea Institute of Industrial Technology (KITECH), 143 Hanggaulro, Ansan 15588, Republic of Korea
2 shared publications - Haneul Mun
Pusan National University
1 shared publication - Hyun Ju Oh
Advanced Textile R&D Department, Korea Institute of Industrial Technology, Ansan 15588, Korea
1 shared publication
Latest Publications
- Open Access
- 2 April 2024
- Published by Springer Nature in Fashion and Textiles
- Vol. 11 (1) , 1-17
Reduction of greenhouse gas emissions by optimizing the textile dyeing process using digital twin technology
Owing to global warming and pollution concerns, reducing the environmental footprint of the textile and fashion industry has received considerable attention. Within this industry, the dyeing and finishing processes contribute significantly to greenhouse gas emissions and water pollution. This study introduces an innovative approach to address these challenges by leveraging digital twin technology to optimize the textile dyeing process. A smart analysis module was developed to continuously monitor and analyze the dyeing parameters in real time to implement control actions to automatically reduce the process duration. Integrated with this module, a digital twin of the dyeing machine enabled the real-time monitoring of energy consumption and process parameters. A case study comparing the traditional dyeing process with the optimized process was conducted. The results showed that dyeing time was reduced by ~ 17.5% without compromising dyeing quality. Energy consumption and greenhouse gas emissions were also reduced by ~ 12.1% when using the optimized process. This study offers a practical and sustainable option for textile dyeing, particularly for small and medium-sized enterprises.
- 2 April 2024
- Published by Springer Nature in Fashion and Textiles
- Vol. 11 (1) , 1-17
Open AccessReduction of greenhouse gas emissions by optimizing the textile dyeing process using digital twin technology
Owing to global warming and pollution concerns, reducing the environmental footprint of the textile and fashion industry has received considerable attention. Within this industry, the dyeing and finishing processes contribute significantly to greenhouse gas emissions and water pollution. This study introduces an innovative approach to address these challenges by leveraging digital twin technology to optimize the textile dyeing process. A smart analysis module was developed to continuously monitor and analyze the dyeing parameters in real time to implement control actions to automatically reduce the process duration. Integrated with this module, a digital twin of the dyeing machine enabled the real-time monitoring of energy consumption and process parameters. A case study comparing the traditional dyeing process with the optimized process was conducted. The results showed that dyeing time was reduced by ~ 17.5% without compromising dyeing quality. Energy consumption and greenhouse gas emissions were also reduced by ~ 12.1% when using the optimized process. This study offers a practical and sustainable option for textile dyeing, particularly for small and medium-sized enterprises.
- Open Access
Advanced Design of Integrated Heat Recovery and Supply System Using Heated Water Storage for Textile Dyeing Process
Heat recovery from a high-temperature wastewater is the major concern in the conventional textile industry. However, limited space in the textile plant is an important constraint for the process enhancement. Therefore, an easily applicable heat recovery system with a small amount of additional equipment to the existing dyeing process is required. To meet the needs from the industry, this study suggests an integrated heat recovery and supply system consisting of single heat exchanger and single storage tank using freshwater as a thermal carrier to utilize the reusable heat in the wastewater. Freshwater is stored in a tank after direct heat exchange with wastewater and is supplied to the next dyeing process. Three different designs of the integrated system were compared based on the lower limit of the wastewater temperature: above 50 °C, 40 °C, and 30 °C for Cases 1, 2, and 3, respectively. The energy and energy flow analyses showed Case 2 to be well balanced between the quality and quantity of the recovered heat, and there was no heat loss via drainage. The heat demand for Case 2 was 795.5 kW, which was the lowest among all cases. Furthermore, an economic analysis showed that the total cost for Case 2 was reduced by 63.2% compared with the base case. Despite the use of an additional heat exchanger and water storage tank, the proposed system was more economical because of the reduced operating costs. Finally, a detailed analysis was conducted by determining the more efficient temperature for heat recovery and supply.
Open AccessAdvanced Design of Integrated Heat Recovery and Supply System Using Heated Water Storage for Textile Dyeing Process
Heat recovery from a high-temperature wastewater is the major concern in the conventional textile industry. However, limited space in the textile plant is an important constraint for the process enhancement. Therefore, an easily applicable heat recovery system with a small amount of additional equipment to the existing dyeing process is required. To meet the needs from the industry, this study suggests an integrated heat recovery and supply system consisting of single heat exchanger and single storage tank using freshwater as a thermal carrier to utilize the reusable heat in the wastewater. Freshwater is stored in a tank after direct heat exchange with wastewater and is supplied to the next dyeing process. Three different designs of the integrated system were compared based on the lower limit of the wastewater temperature: above 50 °C, 40 °C, and 30 °C for Cases 1, 2, and 3, respectively. The energy and energy flow analyses showed Case 2 to be well balanced between the quality and quantity of the recovered heat, and there was no heat loss via drainage. The heat demand for Case 2 was 795.5 kW, which was the lowest among all cases. Furthermore, an economic analysis showed that the total cost for Case 2 was reduced by 63.2% compared with the base case. Despite the use of an additional heat exchanger and water storage tank, the proposed system was more economical because of the reduced operating costs. Finally, a detailed analysis was conducted by determining the more efficient temperature for heat recovery and supply.
- Open Access
Optimization of Heat Exchanger Network via Pinch Analysis in Heat Pump-Assisted Textile Industry Wastewater Heat Recovery System
Reactive dyeing is primarily used in the textile industry to achieve a high level of productivity for high-quality products. This method requires heating a large amount of freshwater for dyeing and cooling for the biological treatment of discharged wastewater. If the heat of the wastewater discharged from the textile industry is recovered, energy used for heating freshwater and cooling wastewater can be significantly reduced. However, the energy efficiency of this industry remains low, owing to the limited use of waste heat. Hence, this study suggested a cost-optimal heat exchanger network (HEN) in a heat pump-assisted textile industry wastewater heat recovery system with maximizing energy efficiency simultaneously. A novel two-step approach was suggested to develop the optimal HEN in heat pump-assisted textile industry wastewater heat recovery system. In the first step, the system was designed to integrate the heat exchanger and heat pump to recover waste heat effectively. In the second step, the HEN in the newly developed system was retrofitted using super-targeted pinch analysis to minimize cost and maximize energy efficiency simultaneously. As a result, the proposed wastewater heat recovery system reduced the total annualized cost by up to 43.07% as compared to the conventional textile industry lacking a wastewater heat recovery system. These findings may facilitate economic and environmental improvements in the textile industry.
Open AccessOptimization of Heat Exchanger Network via Pinch Analysis in Heat Pump-Assisted Textile Industry Wastewater Heat Recovery System
Reactive dyeing is primarily used in the textile industry to achieve a high level of productivity for high-quality products. This method requires heating a large amount of freshwater for dyeing and cooling for the biological treatment of discharged wastewater. If the heat of the wastewater discharged from the textile industry is recovered, energy used for heating freshwater and cooling wastewater can be significantly reduced. However, the energy efficiency of this industry remains low, owing to the limited use of waste heat. Hence, this study suggested a cost-optimal heat exchanger network (HEN) in a heat pump-assisted textile industry wastewater heat recovery system with maximizing energy efficiency simultaneously. A novel two-step approach was suggested to develop the optimal HEN in heat pump-assisted textile industry wastewater heat recovery system. In the first step, the system was designed to integrate the heat exchanger and heat pump to recover waste heat effectively. In the second step, the HEN in the newly developed system was retrofitted using super-targeted pinch analysis to minimize cost and maximize energy efficiency simultaneously. As a result, the proposed wastewater heat recovery system reduced the total annualized cost by up to 43.07% as compared to the conventional textile industry lacking a wastewater heat recovery system. These findings may facilitate economic and environmental improvements in the textile industry.
- Open Access
- 16 November 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (11) , 3090
ZrSnO4: A Solution-Processed Robust Electron Transport Layer of Efficient Planar-Heterojunction Perovskite Solar Cells
A robust electron transport layer (ETL) is an essential component in planar-heterojunction perovskite solar cells (PSCs). Herein, a sol-gel-driven ZrSnO4 thin film is synthesized and its optoelectronic properties are systematically investigated. The optimized processing conditions for sol-gel synthesis produce a ZrSnO4 thin film that exhibits high optical transmittance in the UV-Vis-NIR range, a suitable conduction band maximum, and good electrical conductivity, revealing its potential for application in the ETL of planar-heterojunction PSCs. Consequently, the ZrSnO4 ETL-based devices deliver promising power conversion efficiency (PCE) up to 19.05% from CH3NH3PbI3-based planar-heterojunction devices. Furthermore, the optimal ZrSnO4 ETL also contributes to decent long-term stability of the non-encapsulated device for 360 h in an ambient atmosphere (T~25 °C, RH~55%,), suggesting great potential of the sol-gel-driven ZrSnO4 thin film for a robust solution-processed ETL material in high-performance PSCs.
- 16 November 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (11) , 3090
Open AccessZrSnO4: A Solution-Processed Robust Electron Transport Layer of Efficient Planar-Heterojunction Perovskite Solar Cells
A robust electron transport layer (ETL) is an essential component in planar-heterojunction perovskite solar cells (PSCs). Herein, a sol-gel-driven ZrSnO4 thin film is synthesized and its optoelectronic properties are systematically investigated. The optimized processing conditions for sol-gel synthesis produce a ZrSnO4 thin film that exhibits high optical transmittance in the UV-Vis-NIR range, a suitable conduction band maximum, and good electrical conductivity, revealing its potential for application in the ETL of planar-heterojunction PSCs. Consequently, the ZrSnO4 ETL-based devices deliver promising power conversion efficiency (PCE) up to 19.05% from CH3NH3PbI3-based planar-heterojunction devices. Furthermore, the optimal ZrSnO4 ETL also contributes to decent long-term stability of the non-encapsulated device for 360 h in an ambient atmosphere (T~25 °C, RH~55%,), suggesting great potential of the sol-gel-driven ZrSnO4 thin film for a robust solution-processed ETL material in high-performance PSCs.
- Open Access
Facile Post Treatment of Ag Nanowire/Polymer Composites for Flexible Transparent Electrodes and Thin Film Heaters
Typical polyol-based synthesis of silver nanowire employs insulating polymer as a surfactant for the silver nanowire growth, which limits direct contact between each nanowire and thus its optoelectronic properties. We herein demonstrate that a simple solvent treatment effectively removes the insulating polymer around Ag NWs, leading to significantly decreased sheet resistance (~12 Ω/sq) with an increased transmittance (81% @ T550), as compared to other post-treatments. We successfully demonstrate the transparent film heaters using the solvent-treated Ag NWs network, which rapidly exhibited 150 °C under a bias of 5 V. Flexible film heaters on plastic substrate is also demonstrated, suggesting a great potential of the solvent treatment process of Ag NWs for flexible transparent electrode and film heater applications.
Open AccessFacile Post Treatment of Ag Nanowire/Polymer Composites for Flexible Transparent Electrodes and Thin Film Heaters
Typical polyol-based synthesis of silver nanowire employs insulating polymer as a surfactant for the silver nanowire growth, which limits direct contact between each nanowire and thus its optoelectronic properties. We herein demonstrate that a simple solvent treatment effectively removes the insulating polymer around Ag NWs, leading to significantly decreased sheet resistance (~12 Ω/sq) with an increased transmittance (81% @ T550), as compared to other post-treatments. We successfully demonstrate the transparent film heaters using the solvent-treated Ag NWs network, which rapidly exhibited 150 °C under a bias of 5 V. Flexible film heaters on plastic substrate is also demonstrated, suggesting a great potential of the solvent treatment process of Ag NWs for flexible transparent electrode and film heater applications.
- Open Access
Colorimetric Textile Sensor for the Simultaneous Detection of NH3 and HCl Gases
For the immediate detection of strong gaseous alkalis and acids, colorimetric textile sensors based on halochromic dyes are highly valuable for monitoring gas leakages. To date, colorimetric textile sensors for dual-gas detection have usually been fabricated by electrospinning methods. Although nanofibrous sensors have excellent pH sensitivity, they are difficult to use commercially because of their low durability, low productivity, and high production costs. In this study, we introduce novel textile sensors with high pH sensitivity and durability via a facile and low-cost screen-printing method. To fabricate these textiles sensors, Dye 3 and RhYK dyes were both incorporated into a polyester fabric. The fabricated sensors exhibited high detection rates (<10 s) and distinctive color changes under alkaline or acidic conditions, even at low gas concentrations. Furthermore, the fabricated sensors showed an outstanding durability and reversibility after washing and drying and were confirmed to contain limited amounts of hazardous materials. Thus, our results show that the fabricated textile sensors could be used in safety apparel that changes its color in the presence of harmful gases.
Open AccessColorimetric Textile Sensor for the Simultaneous Detection of NH3 and HCl Gases
For the immediate detection of strong gaseous alkalis and acids, colorimetric textile sensors based on halochromic dyes are highly valuable for monitoring gas leakages. To date, colorimetric textile sensors for dual-gas detection have usually been fabricated by electrospinning methods. Although nanofibrous sensors have excellent pH sensitivity, they are difficult to use commercially because of their low durability, low productivity, and high production costs. In this study, we introduce novel textile sensors with high pH sensitivity and durability via a facile and low-cost screen-printing method. To fabricate these textiles sensors, Dye 3 and RhYK dyes were both incorporated into a polyester fabric. The fabricated sensors exhibited high detection rates (<10 s) and distinctive color changes under alkaline or acidic conditions, even at low gas concentrations. Furthermore, the fabricated sensors showed an outstanding durability and reversibility after washing and drying and were confirmed to contain limited amounts of hazardous materials. Thus, our results show that the fabricated textile sensors could be used in safety apparel that changes its color in the presence of harmful gases.