Teresa Marques-Almeida
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Teresa Marques-Almeida has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Senentxu Lanceros Mendez
BCMaterials, Basque Center for Materials, Applications and Nanostructures, UPV/EHU Science Park, 48940 Leioa, Spain
7 shared publications - Clarisse Ribeiro
CF‐UM‐UP – Physics Centre of Minho and Porto Universities University of Minho Braga Portugal
6 shared publications - Vanessa Fernandes Cardoso
CMEMS-UMinho, University of Minho, DEI, Campus de Azurém, Guimarães 4800-058, Portugal
3 shared publications - Daniela Maria Correia
University of Minho
2 shared publications - Miguel Gama
University of Minho, Campus de Gualtar
2 shared publications - Bárbara D. D. Cruz
Centre of Chemistry, University of Minho, 4710-057 Braga, Portugal
1 shared publication
Latest Publications
- Open Access
- 27 July 2024
- Published by Elsevier in Materials Science and Engineering: C
- Vol. 164, 213970
Piezoelectric biomaterials with embedded ionic liquids for improved orthopedic interfaces through osseointegration and antibacterial dual characteristics
- 27 July 2024
- Published by Elsevier in Materials Science and Engineering: C
- Vol. 164, 213970
Open AccessPiezoelectric biomaterials with embedded ionic liquids for improved orthopedic interfaces through osseointegration and antibacterial dual characteristics
- 23 November 2022
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 11 (1) , 144-153
Surface charge and dynamic mechanoelectrical stimuli improves adhesion, proliferation and differentiation of neuron-like cells
Neuronal diseases and trauma are among the current major health-care problems.
- 23 November 2022
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 11 (1) , 144-153
Surface charge and dynamic mechanoelectrical stimuli improves adhesion, proliferation and differentiation of neuron-like cells
Neuronal diseases and trauma are among the current major health-care problems.
- Open Access
- 7 November 2020
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 21 (21) , 8352
Patterned Piezoelectric Scaffolds for Osteogenic Differentiation
The morphological clues of scaffolds can determine cell behavior and, therefore, the patterning of electroactive polymers can be a suitable strategy for bone tissue engineering. In this way, this work reports on the influence of poly(vinylidene fluoride-co-trifluoroethylene) (P(VDF-TrFE)) electroactive micropatterned scaffolds on the proliferation and differentiation of bone cells. For that, micropatterned P(VDF-TrFE) scaffolds were produced by lithography in the form of arrays of lines and hexagons and then tested for cell proliferation and differentiation of pre-osteoblast cell line. Results show that more anisotropic surface microstructures promote bone differentiation without the need of further biochemical stimulation. Thus, the combination of specific patterns with the inherent electroactivity of materials provides a promising platform for bone regeneration.
- 7 November 2020
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 21 (21) , 8352
Open AccessPatterned Piezoelectric Scaffolds for Osteogenic Differentiation
The morphological clues of scaffolds can determine cell behavior and, therefore, the patterning of electroactive polymers can be a suitable strategy for bone tissue engineering. In this way, this work reports on the influence of poly(vinylidene fluoride-co-trifluoroethylene) (P(VDF-TrFE)) electroactive micropatterned scaffolds on the proliferation and differentiation of bone cells. For that, micropatterned P(VDF-TrFE) scaffolds were produced by lithography in the form of arrays of lines and hexagons and then tested for cell proliferation and differentiation of pre-osteoblast cell line. Results show that more anisotropic surface microstructures promote bone differentiation without the need of further biochemical stimulation. Thus, the combination of specific patterns with the inherent electroactivity of materials provides a promising platform for bone regeneration.
- 6 December 2019
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 12 (1) , 60-69
Tailoring Electrospun Poly(l-lactic acid) Nanofibers as Substrates for Microfluidic Applications
Novel microfluidic substrates based on electrospun poly(l-lactic acid) (PLLA) membranes were developed to increase the limited range of commercially available paper substrates, commonly used for the fabrication of microfluidic paper-based analytical devices (µPADs). PLLA advantageous properties include being biodegradable, biocompatible, easily processed in various tailored morphologies, and cost effective, among others. Oriented and non-oriented electrospun PLLA membranes were fabricated using electrospinning and the influence of fibre orientation, addition of hydrophilic additives and plasma treatments on the morphology, physicochemical properties and capillary flow rate were evaluated and compared with commercial Whatman paper. In addition, a proof of concept application based on the colorimetric detection of glucose in printed PLLA and paper-based microfluidic systems was also performed. The results show the potential of PLLA substrates for the fabrication of portable, disposable, eco-friendly and cost-effective microfluidic systems with controllable properties that can be tailored according to specific biotechnological application requirements, being a suitable alternative to conventional paper-based substrates.
- 6 December 2019
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 12 (1) , 60-69
Tailoring Electrospun Poly(l-lactic acid) Nanofibers as Substrates for Microfluidic Applications
Novel microfluidic substrates based on electrospun poly(l-lactic acid) (PLLA) membranes were developed to increase the limited range of commercially available paper substrates, commonly used for the fabrication of microfluidic paper-based analytical devices (µPADs). PLLA advantageous properties include being biodegradable, biocompatible, easily processed in various tailored morphologies, and cost effective, among others. Oriented and non-oriented electrospun PLLA membranes were fabricated using electrospinning and the influence of fibre orientation, addition of hydrophilic additives and plasma treatments on the morphology, physicochemical properties and capillary flow rate were evaluated and compared with commercial Whatman paper. In addition, a proof of concept application based on the colorimetric detection of glucose in printed PLLA and paper-based microfluidic systems was also performed. The results show the potential of PLLA substrates for the fabrication of portable, disposable, eco-friendly and cost-effective microfluidic systems with controllable properties that can be tailored according to specific biotechnological application requirements, being a suitable alternative to conventional paper-based substrates.
- 14 March 2019
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 2 (4) , 1591-1602
Tuning Myoblast and Preosteoblast Cell Adhesion Site, Orientation, and Elongation through Electroactive Micropatterned Scaffolds
Electroactive polymers are being increasingly used in tissue engineering applications. Together with the electromechanical clues, morphological ones have been demonstrated to determine cell proliferation and differentiation. This work reports on the micro patterning of poly(vinylidene fluoride-co-trifluoroethylene) - P(VDF-TrFE) scaffolds - and their interaction with myoblast and pre-osteoblasts cell lines, selected based on their different functional morphology. The scaffolds were obtained by soft lithography and obtained in the form of arrays of lines, intermittent lines, hexagons, linear zigzags and curved zigzags with dimensions of 25, 75 and 150 µm. Moreover, the scaffolds were tested in cell adhesion assays of myoblasts and pre-osteoblasts cell lines. The results show that more linear surface topographies and dense morphology have a large potential in the regeneration of musculoskeletal tissue while non-patterned scaffolds or more anisotropic surface microstructures present largest potential to promote the growth and regeneration of bone tissue. In this way, cell adhesion site, orientation and elongation can be controlled by choosing properly the topography and morphology of the scaffolds, indicating their suitability and potential for further proliferation and differentiation assays.
- 14 March 2019
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 2 (4) , 1591-1602
Tuning Myoblast and Preosteoblast Cell Adhesion Site, Orientation, and Elongation through Electroactive Micropatterned Scaffolds
Electroactive polymers are being increasingly used in tissue engineering applications. Together with the electromechanical clues, morphological ones have been demonstrated to determine cell proliferation and differentiation. This work reports on the micro patterning of poly(vinylidene fluoride-co-trifluoroethylene) - P(VDF-TrFE) scaffolds - and their interaction with myoblast and pre-osteoblasts cell lines, selected based on their different functional morphology. The scaffolds were obtained by soft lithography and obtained in the form of arrays of lines, intermittent lines, hexagons, linear zigzags and curved zigzags with dimensions of 25, 75 and 150 µm. Moreover, the scaffolds were tested in cell adhesion assays of myoblasts and pre-osteoblasts cell lines. The results show that more linear surface topographies and dense morphology have a large potential in the regeneration of musculoskeletal tissue while non-patterned scaffolds or more anisotropic surface microstructures present largest potential to promote the growth and regeneration of bone tissue. In this way, cell adhesion site, orientation and elongation can be controlled by choosing properly the topography and morphology of the scaffolds, indicating their suitability and potential for further proliferation and differentiation assays.
- Open Access
- 24 July 2018
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 19 (8) , 2149
Tailored Biodegradable and Electroactive Poly(Hydroxybutyrate-Co-Hydroxyvalerate) Based Morphologies for Tissue Engineering Applications
Polymer-based piezoelectric biomaterials have already proven their relevance for tissue engineering applications. Furthermore, the morphology of the scaffolds plays also an important role in cell proliferation and differentiation. The present work reports on poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV), a biocompatible, biodegradable, and piezoelectric biopolymer that has been processed in different morphologies, including films, fibers, microspheres, and 3D scaffolds. The corresponding magnetically active PHBV-based composites were also produced. The effect of the morphology on physico-chemical, thermal, magnetic, and mechanical properties of pristine and composite samples was evaluated, as well as their cytotoxicity. It was observed that the morphology does not strongly affect the properties of the pristine samples but the introduction of cobalt ferrites induces changes in the degree of crystallinity that could affect the applicability of prepared biomaterials. Young’s modulus is dependent of the morphology and also increases with the addition of cobalt ferrites. Both pristine and PHBV/cobalt ferrite composite samples are not cytotoxic, indicating their suitability for tissue engineering applications.
- 24 July 2018
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 19 (8) , 2149
Open AccessTailored Biodegradable and Electroactive Poly(Hydroxybutyrate-Co-Hydroxyvalerate) Based Morphologies for Tissue Engineering Applications
Polymer-based piezoelectric biomaterials have already proven their relevance for tissue engineering applications. Furthermore, the morphology of the scaffolds plays also an important role in cell proliferation and differentiation. The present work reports on poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV), a biocompatible, biodegradable, and piezoelectric biopolymer that has been processed in different morphologies, including films, fibers, microspheres, and 3D scaffolds. The corresponding magnetically active PHBV-based composites were also produced. The effect of the morphology on physico-chemical, thermal, magnetic, and mechanical properties of pristine and composite samples was evaluated, as well as their cytotoxicity. It was observed that the morphology does not strongly affect the properties of the pristine samples but the introduction of cobalt ferrites induces changes in the degree of crystallinity that could affect the applicability of prepared biomaterials. Young’s modulus is dependent of the morphology and also increases with the addition of cobalt ferrites. Both pristine and PHBV/cobalt ferrite composite samples are not cytotoxic, indicating their suitability for tissue engineering applications.
- 1 June 2018
- Published by IOP Publishing in Materials Research Express
- Vol. 5 (6) , 065313
Layer-by-layer fabrication of highly transparent polymer based piezoelectric transducers
- 1 June 2018
- Published by IOP Publishing in Materials Research Express
- Vol. 5 (6) , 065313
Layer-by-layer fabrication of highly transparent polymer based piezoelectric transducers