Yuncai Zhang
Research Subjects
Yuncai Zhang has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Tao Meng
College of Civil Engineering and Architecture, Zhejiang University, Hangzhou 310058, China
2 shared publications - Bo Zhang
Ocean Research Center of Zhoushan, Zhejiang University, Zhoushan 316021, China
1 shared publication - Cungui Zhang
Shanxi Sixth Construction Group Co., Ltd., Taiyuan 030024, China
1 shared publication - Huadong Wei
College of Civil Engineering and Architecture, Zhejiang University, Hangzhou 310058, China
1 shared publication - Huadong Wei
College of Civil Engineering and Architecture, Zhejiang University, Hangzhou 310058, China
1 shared publication - Menghua Wang
College of Civil Engineering and Architecture, Zhejiang University, Hangzhou 310058, China
1 shared publication
Latest Publications
- Open Access
Effect of Mixed Recycled Aggregate on the Mechanical Strength and Microstructure of Concrete under Different Water Cement Ratios
Mixed recycled aggregate (MRA) is a kind of recycled aggregate containing discarded bricks and other impurities that is inferior to ordinary recycled concrete aggregate. To study the effect of MRA in concrete, specimens with 100% MRA under different water–cement ratios (W/C) of 0.50, 0.42, 0.36 and 0.30 were prepared, and the mechanical properties and microstructure were tested. Results show that compared with ordinary concrete, the compressive strength of mixed recycled aggregate concrete (MRAC) with the same W/C was reduced by more than 50% at 28 days, but the axial compression ratio was relatively high, reaching over 0.87. Affected by the high water absorption of MRA, the hydration rate of cement slowed, which was beneficial to the long-term development of the properties of MRAC. An appropriate increase in cement content could strengthen MRA and densify the pore structure of MRAC. The research results of this article prove that MRA has high utilization value and could be used to prepare MRAC with application potential using optimal gradation, which is of positive significance for promoting the consumption of construction waste.
Open AccessEffect of Mixed Recycled Aggregate on the Mechanical Strength and Microstructure of Concrete under Different Water Cement Ratios
Mixed recycled aggregate (MRA) is a kind of recycled aggregate containing discarded bricks and other impurities that is inferior to ordinary recycled concrete aggregate. To study the effect of MRA in concrete, specimens with 100% MRA under different water–cement ratios (W/C) of 0.50, 0.42, 0.36 and 0.30 were prepared, and the mechanical properties and microstructure were tested. Results show that compared with ordinary concrete, the compressive strength of mixed recycled aggregate concrete (MRAC) with the same W/C was reduced by more than 50% at 28 days, but the axial compression ratio was relatively high, reaching over 0.87. Affected by the high water absorption of MRA, the hydration rate of cement slowed, which was beneficial to the long-term development of the properties of MRAC. An appropriate increase in cement content could strengthen MRA and densify the pore structure of MRAC. The research results of this article prove that MRA has high utilization value and could be used to prepare MRAC with application potential using optimal gradation, which is of positive significance for promoting the consumption of construction waste.
- Open Access
- 6 November 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (21) , 7867
Analysis of the Effect of Nano-SiO2 and Waterproofing Agent on the Water Transportation Process in Mortar Using NMR
Moisture diffusion in cement-based materials significantly impacts its durability. In this study, we analyzed the effect of adding a waterproofing agent and nano-SiO2 (NS) on the water transportation process in mortar using capillary water absorption tests and nuclear magnetic resonance (NMR) technology. The results indicate that the combined action of the waterproofing agent and nano-SiO2 drastically reduce the capillary water absorption coefficient and have a more significant impact than only adding the waterproofing agent. The moisture diffusion in different sections of the mortar during the water absorption process is obtained from the NMR test results and two function models. Comparative studies indicate that the NMR test results have good correlation with the capillary water absorption test results and provide accurate process data. The NMR analysis results offer a new analytical method to characterize the porosity of cement-based materials by continuously monitoring small-pitch sections.
- 6 November 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (21) , 7867
Open AccessAnalysis of the Effect of Nano-SiO2 and Waterproofing Agent on the Water Transportation Process in Mortar Using NMR
Moisture diffusion in cement-based materials significantly impacts its durability. In this study, we analyzed the effect of adding a waterproofing agent and nano-SiO2 (NS) on the water transportation process in mortar using capillary water absorption tests and nuclear magnetic resonance (NMR) technology. The results indicate that the combined action of the waterproofing agent and nano-SiO2 drastically reduce the capillary water absorption coefficient and have a more significant impact than only adding the waterproofing agent. The moisture diffusion in different sections of the mortar during the water absorption process is obtained from the NMR test results and two function models. Comparative studies indicate that the NMR test results have good correlation with the capillary water absorption test results and provide accurate process data. The NMR analysis results offer a new analytical method to characterize the porosity of cement-based materials by continuously monitoring small-pitch sections.