LCLahouari Cheded

Lahouari Cheded

*This is an algorithmically generated author record based on publicly available information.

Lahouari Cheded has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Gaussian-Based Parametric Bijections for Automatic Projection Filters

    by Muhammad F. Emzir, Zheng Zhao, Lahouari Cheded, Simo Särkkä

    The automatic projection filter is a recently developed numerical method for projection filtering that leverages sparse-grid integration and automatic differentiation. However, its accuracy is highly sensitive to the accuracy of the cumulant-generating function computed via the sparse-grid integration, which in turn is also sensitive to the choice of the bijection from the canonical hypercube to the state space. In this article, we propose two new adaptive parametric bijections for the automatic projection filter. The first bijection relies on the minimization of Kullback–Leibler divergence, whereas the second method employs the sparse-grid Gauss–Hermite quadrature. The two new bijections allow the sparse-grid nodes to adaptively move within the high-density region of the state space, resulting in a substantially improved approximation while using only a small number of quadrature nodes. The practical applicability of the methodology is illustrated in three simulated nonlinear filtering problems.


  • Tracking the trajectory of an object in a noisy environment with unknown statistics: A novel robust Kalman filter residue-based approach

    by Lahouari Cheded, Rajamani Doraiswami

    A novel robust Kalman filter (KF)-based controller design approach is proposed to accurately track a specified trajectory under unknown stochastic disturbance, known deterministic disturbance, and measurement noise. The system is nonlinear and is approximated by a piecewise-linear dynamic model. The Box–Jenkins model is an augmented model of the signal and the disturbance, is non-controllable and observable, while the signal model is controllable and observable. An emulator-based two-stage identification is employed to obtain an accurate system model needed to design the robust controller. The system and its KF are identified, and the signal and output errors are estimated. From the identified models, the signal, its KF, the disturbance model, and the whitening filter are all obtained using balanced model reduction techniques. It is shown that the signal model is a transfer matrix description relating the system output and KF residual, and the residual is the whitened output error. The disturbance model is identified by inverse filtering. A new combined feedforward–feedback controller is designed and implemented using an internal model of the reference driven by both the error between the reference and the signal estimate, and by the feedforwarded reference signal. The proposed scheme was successfully evaluated on a simulated autonomously guided drone.


  • New Kalman Filter Residue-Based Identification and Soft Sensor Design for Accurate Trajectory Tracking with a Fault-tolerant Robot

    by Rajamani Doraiswami, Lahouari Cheded, Eduardo Jair Tito Mamani, Pamela Giselle Villarroe, Paul Gerardo Cori Mamani, Paulo Roberto Loma Marconi, Claudio Cesar Carlos Olivares, Justo Franz Choque Choque, Layde Aydee Cruz Torrico


  • Open Access

    Fault tolerance in non‐linear systems: A model‐based approach with a robust soft sensor design

    by Rajamani Doraiswami, Lahouari Cheded

    A novel multiple Kalman filtre (KF)‐based scheme is proposed, as a generalisation of conventional gain‐scheduling techniques, for fault diagnosis and tolerance in a large class of multiple‐input and multiple‐output non‐linear systems. The outputs are corrupted by unknown stochastic disturbance and measurement noise. A reliable and computationally efficient, two‐stage identification of a piecewise linear parameter‐varying Box–Jenkins dynamic model that better approximates the non‐linear system, at each operating point, and the design of the associated KFs are proposed. Novel emulators, whose induced parameter changes mimic likely and predictive operating scenarios, are used to provide an accurate model identification and robustness to noise, disturbance, non‐linearity errors and model perturbations. These crucial emulators generate missing representative data, aid predictive analytics, and improve the reliability and accuracy of the identified KF model. A novel formulation of the KF is used for fault isolation, and the Bayes strategy is used to isolate difficult‐to‐detect incipient faults in noisy environments. The proposed scheme leads to the design of a novel robust soft sensor aimed at replacing the maintenance‐prone hardware sensor in practical applications including product quality assessment, performance monitoring, condition‐based maintenance, fault diagnosis and fault‐tolerant control. The proposed soft sensor was successfully evaluated on simulated and laboratory‐scale physical control systems.


  • Open Access

    New approach to model‐order selection

    by R. Doraiswami, L. Cheded

    A new, direct and practical scheme is proposed for determining the model orders of a system, its signal and disturbance using key properties of Kalman filter (KF). Unlike conventional methods, it enjoys the unique property of being both necessary and sufficient. The system is described by the Box–Jenkins model, whose accessible input and output are corrupted by unknown zero‐mean white Gaussian‐distributed disturbances and measurement noise. The signal and disturbance are outputs of asymptotically‐stable linear time‐invariant systems driven by an inaccessible input and a zero‐mean white Gaussian noise process, respectively. Predictive analytics is used to estimate the input by exploiting its smoothness and the randomness of the noisy input. The system, signal, and disturbance models and their associated KFs are identified for various selected model orders by minimising the KF residuals so that these become zero‐mean white noise processes. The selected model‐order corresponds to the minimum‐variance residual. Equivalently, the minimum order is selected when the number of poles or the output estimates of the identified models are all identical for all orders equal to, or exceeding the minimal order. The scheme is successfully evaluated and shown to outperform the commonly‐used but only sufficient Akaike Information Criterion.


  • Open Access

    Leak Detection Using Flow-Induced Vibrations in Pressurized Wall-Mounted Water Pipelines

    by Mati-Ur-Rasool Ashraf Virk, Muhammad Faizan Mysorewala, Lahouari Cheded, Ibrahim Mohamed Ali

    Wireless sensor networks (WSN) provide a powerful solution to the task of monitoring the operational conditions of buried and non-buried pipes of different lengths and materials. Due to the limited energy stored in the sensor nodes, the use of low-power vibration sensors becomes the preferred choice. However, the monitoring of vibrations for leak detection in wall-mounted pipelines, and the associated complexities are not adequately dealt with in the literature. This article offers to fill this gap by presenting a feasibility study of leak detection in wall-mounted water pipelines through vibrations measurements using low-power accelerometers. The work is divided into two steps: Firstly, a careful analysis is performed to understand the effect of various fittings such as clamps, bends, and leaks of various sizes, on the vibrations produced. Then this knowledge is used to find the best locations for placement of nodes in order to efficiently detect leaks of various sizes. This analysis revealed two important facts: (a) difficulty in detecting medium-size leaks as their vibrations and those from the no-leak condition are very indistinguishable, (b) vibrations measured away from the leak are of a small benefit to the leak detection process. Consequently, 3 different learning models are applied, all fed with information from multiple nodes, in order to reliably detect leaks and classify their size. Comparing the performances of these models shows that the Support Vector Machine (SVM)-based model gives the best results, in that for the worst case of medium-size leaks and with the use of one sensor, the worst accuracies for leak detection and leak size classification have remarkably been improved from being respectively 51% and 36% with one sensor, to being 88% and 93%, respectively, with only a moderate increase in the number of sensors to four.


  • Open Access

    Novel Direct and Accurate Identification of Kalman Filter for General Systems Described by a Box-Jenkins Model

    by Rajamani Doraiswami, Lahouari Cheded

    A novel robust Kalman filter (KF)-based controller is proposed for a multivariable system to accurately track a specified trajectory under unknown stochastic disturbance and measurement noise. The output is a sum of uncorrelated signal, disturbance and measurement noise. The system model is observable but not controllable while the signal one is controllable and observable. An emulator-based two-stage identification is employed to obtain a robust model needed to design the robust controller. The system and KF are identified and the signal and output error estimated. From the identified models, minimal realizations of the signal and KF, the disturbance model and whitening filter are obtained using balanced model reduction techniques. It is shown that the signal model is a transfer matrix relating the system output and the KF residual, and the residual is the whitened output error. The disturbance model is identified by inverse filtering. A feedback-feedforward controller is designed and implemented using an internal model of the reference driven by the error between the reference and the signal estimate, the feedforward of reference and output error. The successful evaluation of the proposed scheme on a simulated autonomously-guided drone gives ample encouragement to test it later, on a real one.


  • Open Access

    Robust Kalman filter‐based least squares identification of a multivariable system

    by Rajamani Doraiswami, Lahouari Cheded

    A novel direct identification using the residual model of Kalman filter (KF) is proposed for multiple‐input and multiple‐output Box–Jenkins model of the system formed of the signal and disturbance models using the residual model relating the input and output of the system without any a priori knowledge of the statistics of the disturbance and measurement noise corrupting the output. To avoid a non‐linear optimisation, the auto‐regressive and moving average (MA) residual model is approximated by a high‐order MA model, so that the unknown parameters of the KF enter the residual model linearly. A key property of the KF is established, namely that the transfer matrix of the signal model is the matrix fraction description (MFD) model relating the residual and the system input and output. A two‐stage identification method is developed here. In stage 1, a high‐order KF of the system is identified using the robust, and computationally efficient least‐squares method to capture completely both the signal and disturbance models. In stage 2, the KF for the signal is derived using the balanced model reduction technique. The signal model is derived using the key MFD property. The performance of the proposed scheme is successfully evaluated on both simulated and physical systems.