Samer Hanoun
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Samer Hanoun has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Saeid Nahavandi
Swinburne University of Technology
9 shared publications - Asim Bhatti
Deakin University
4 shared publications - Burhan Khan
Deakin University
4 shared publications - Douglas Creighton
Deakin University
3 shared publications - Herath M. P. C. Jayaweera
Institute for Intelligent Systems Research and Innovation, Deakin University, Waurn Ponds, Geelong, VIC 3216, Australia
3 shared publications - David Yang Gao
Federation University Australia
2 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 135233-135253
Adversarial Attacks in Autonomous Vehicles: A Comprehensive Review of Threats and Defence Strategies
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 135233-135253
Open AccessAdversarial Attacks in Autonomous Vehicles: A Comprehensive Review of Threats and Defence Strategies
- 5 August 2022
- Published by SAGE Publications in Human Factors: The Journal of the Human Factors and Ergonomics Society
- Vol. 66 (3) , 818-838
Evaluating Operator Training Performance Using Recurrence Quantification Analysis of Autocorrelation Transformed Eye Gaze Data
Objective: This research aimed to investigate the relationship between gaze behaviour dynamics and operator performance. Background: Individuals differ in their approach when learning a new task often resulting in performance disparity. During training some individuals learn the structure and dynamics of the task and develop a systematic approach, whereas others may achieve the same result albeit with increased perceived workload, or indeed some may fail to achieve superior performance levels. Previous research has shown that comparing gaze of experts with novices can provide unique insights into cognitive functioning of superior performers. Methods: Twenty-five individuals participated in a computer-based simulation task. The concept of coefficient of variation (CoV) of task scores was used to compute the participants’ consistency of performance. Based on CoV, the cohort was split into two performance categories. The temporal patterns in participants gaze data were transformed using autocorrelation, and recurrence quantification analysis (RQA) was employed to analyse and quantify the patterns. Results: A Mann–Whitney U analysis demonstrated significantly ( p < .01) higher determinism, entropy and laminarity in the superior group compared to the moderate group. Pearson’s correlation revealed a significant ( p < .01) negative correlation between the consistency of task performance (CoV) and the RQA measures. Conclusion: The results demonstrated that eye gaze dynamics can be used as an objective measure of performance. Participants classified as superior performers consistently demonstrated a systematic gaze activity which were in line with the task structure. Application: The methods presented here are applicable to observe and evaluate operators’ strategic distribution of gaze. Specifically, for tactical monitoring and decision making in task environments where spatial locations of elements-of-interest vary continuously.
- 5 August 2022
- Published by SAGE Publications in Human Factors: The Journal of the Human Factors and Ergonomics Society
- Vol. 66 (3) , 818-838
Evaluating Operator Training Performance Using Recurrence Quantification Analysis of Autocorrelation Transformed Eye Gaze Data
Objective: This research aimed to investigate the relationship between gaze behaviour dynamics and operator performance. Background: Individuals differ in their approach when learning a new task often resulting in performance disparity. During training some individuals learn the structure and dynamics of the task and develop a systematic approach, whereas others may achieve the same result albeit with increased perceived workload, or indeed some may fail to achieve superior performance levels. Previous research has shown that comparing gaze of experts with novices can provide unique insights into cognitive functioning of superior performers. Methods: Twenty-five individuals participated in a computer-based simulation task. The concept of coefficient of variation (CoV) of task scores was used to compute the participants’ consistency of performance. Based on CoV, the cohort was split into two performance categories. The temporal patterns in participants gaze data were transformed using autocorrelation, and recurrence quantification analysis (RQA) was employed to analyse and quantify the patterns. Results: A Mann–Whitney U analysis demonstrated significantly ( p < .01) higher determinism, entropy and laminarity in the superior group compared to the moderate group. Pearson’s correlation revealed a significant ( p < .01) negative correlation between the consistency of task performance (CoV) and the RQA measures. Conclusion: The results demonstrated that eye gaze dynamics can be used as an objective measure of performance. Participants classified as superior performers consistently demonstrated a systematic gaze activity which were in line with the task structure. Application: The methods presented here are applicable to observe and evaluate operators’ strategic distribution of gaze. Specifically, for tactical monitoring and decision making in task environments where spatial locations of elements-of-interest vary continuously.
- Open Access
Path Planning of Unmanned Aerial Vehicles (UAVs) in Windy Environments
Path planning of unmanned aerial vehicles (UAVs) is one of the vital components that supports their autonomy and deployment ability in real-world applications. Few path-planning techniques have been thoroughly considered for multirotor UAVs for pursuing ground moving targets (GMTs) with variable speed and direction. Furthermore, most path-planning techniques are generally devised without taking into consideration wind disturbances; as a result, they are less suitable for real-world applications as the wind effect usually causes the UAV to drift and tilt from its original course, impacting the mission’s main objective of having an adequate non-deviant camera aim point and steady coverage over the GMT. This paper presents a novel UAV path-planning technique, based on the artificial potential field (APF) for following GMTs in windy environments, to provide steady and continuous coverage over the GMT, by proposing a new modified attractive force to enhance the UAV’s sensitivity to wind speed and direction. The modified wind resistance attractive force function accommodates for any small variation of relative displacement caused by wind leading the UAV to drift in a certain direction. This enables the UAV to maintain its position by tilting (i.e., changing its roll and pitch angles) against the wind to retain the camera aim point on the GMT. The proposed path-planning technique is hardware-independent, does not require an anemometer for measuring wind speed and direction, and can be adopted for all types of multirotor UAVs equipped with basic sensors and an autopilot flight controller. The proposed path-planning technique was evaluated in a Gazebo-supported PX4-SITL and a robot operating system (ROS) for various simulation scenarios. Its performance demonstrated superiority in handling wind disturbances and showed high suitability for deployment in real-world applications.
Open AccessPath Planning of Unmanned Aerial Vehicles (UAVs) in Windy Environments
Path planning of unmanned aerial vehicles (UAVs) is one of the vital components that supports their autonomy and deployment ability in real-world applications. Few path-planning techniques have been thoroughly considered for multirotor UAVs for pursuing ground moving targets (GMTs) with variable speed and direction. Furthermore, most path-planning techniques are generally devised without taking into consideration wind disturbances; as a result, they are less suitable for real-world applications as the wind effect usually causes the UAV to drift and tilt from its original course, impacting the mission’s main objective of having an adequate non-deviant camera aim point and steady coverage over the GMT. This paper presents a novel UAV path-planning technique, based on the artificial potential field (APF) for following GMTs in windy environments, to provide steady and continuous coverage over the GMT, by proposing a new modified attractive force to enhance the UAV’s sensitivity to wind speed and direction. The modified wind resistance attractive force function accommodates for any small variation of relative displacement caused by wind leading the UAV to drift in a certain direction. This enables the UAV to maintain its position by tilting (i.e., changing its roll and pitch angles) against the wind to retain the camera aim point on the GMT. The proposed path-planning technique is hardware-independent, does not require an anemometer for measuring wind speed and direction, and can be adopted for all types of multirotor UAVs equipped with basic sensors and an autopilot flight controller. The proposed path-planning technique was evaluated in a Gazebo-supported PX4-SITL and a robot operating system (ROS) for various simulation scenarios. Its performance demonstrated superiority in handling wind disturbances and showed high suitability for deployment in real-world applications.
- Open Access
UAV Path Planning for Reconnaissance and Look-Ahead Coverage Support for Mobile Ground Vehicles
Path planning of unmanned aerial vehicles (UAVs) for reconnaissance and look-ahead coverage support for mobile ground vehicles (MGVs) is a challenging task due to many unknowns being imposed by the MGVs’ variable velocity profiles, change in heading, and structural differences between the ground and air environments. Few path planning techniques have been reported in the literature for multirotor UAVs that autonomously follow and support MGVs in reconnaissance missions. These techniques formulate the path planning problem as a tracking problem utilizing gimbal sensors to overcome the coverage and reconnaissance complexities. Despite their lack of considering additional objectives such as reconnaissance coverage and dynamic environments, they retain several drawbacks, including high computational requirements, hardware dependency, and low performance when the MGV has varying velocities. In this study, a novel 3D path planning technique for multirotor UAVs is presented, the enhanced dynamic artificial potential field (ED-APF), where path planning is formulated as both a follow and cover problem with nongimbal sensors. The proposed technique adopts a vertical sinusoidal path for the UAV that adapts relative to the MGV’s position and velocity, guided by the MGV’s heading for reconnaissance and exploration of areas and routes ahead beyond the MGV sensors’ range, thus extending the MGV’s reconnaissance capabilities. The amplitude and frequency of the sinusoidal path are determined to maximize the required look-ahead visual coverage quality in terms of pixel density and quantity pertaining to the area covered. The ED-APF was tested and validated against the general artificial potential field techniques for various simulation scenarios using Robot Operating System (ROS) and Gazebo-supported PX4-SITL. It demonstrated superior performance and showed its suitability for reconnaissance and look-ahead support to MGVs in dynamic and obstacle-populated environments.
Open AccessUAV Path Planning for Reconnaissance and Look-Ahead Coverage Support for Mobile Ground Vehicles
Path planning of unmanned aerial vehicles (UAVs) for reconnaissance and look-ahead coverage support for mobile ground vehicles (MGVs) is a challenging task due to many unknowns being imposed by the MGVs’ variable velocity profiles, change in heading, and structural differences between the ground and air environments. Few path planning techniques have been reported in the literature for multirotor UAVs that autonomously follow and support MGVs in reconnaissance missions. These techniques formulate the path planning problem as a tracking problem utilizing gimbal sensors to overcome the coverage and reconnaissance complexities. Despite their lack of considering additional objectives such as reconnaissance coverage and dynamic environments, they retain several drawbacks, including high computational requirements, hardware dependency, and low performance when the MGV has varying velocities. In this study, a novel 3D path planning technique for multirotor UAVs is presented, the enhanced dynamic artificial potential field (ED-APF), where path planning is formulated as both a follow and cover problem with nongimbal sensors. The proposed technique adopts a vertical sinusoidal path for the UAV that adapts relative to the MGV’s position and velocity, guided by the MGV’s heading for reconnaissance and exploration of areas and routes ahead beyond the MGV sensors’ range, thus extending the MGV’s reconnaissance capabilities. The amplitude and frequency of the sinusoidal path are determined to maximize the required look-ahead visual coverage quality in terms of pixel density and quantity pertaining to the area covered. The ED-APF was tested and validated against the general artificial potential field techniques for various simulation scenarios using Robot Operating System (ROS) and Gazebo-supported PX4-SITL. It demonstrated superior performance and showed its suitability for reconnaissance and look-ahead support to MGVs in dynamic and obstacle-populated environments.
- Open Access
- 21 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 192760-192776
A Dynamic Artificial Potential Field (D-APF) UAV Path Planning Technique for Following Ground Moving Targets
Path planning is a vital and challenging component in the support of Unmanned Aerial Vehicles (UAVs) and their deployment in autonomous missions, such as following ground moving target. Few attempts are reported in the literature on multirotor UAV path planning techniques for following ground moving targets despite the great improvement in their control dynamics, flying behaviors and hardware specifications. These attempts suffer several drawbacks including their hardware dependency, high computational requirements, inability to handle obstacles and dynamic environments in addition to their low performance regarding the moving target speed variations. In this paper, a novel dynamic Artificial Potential Field (D-APF) path planning technique is developed for multirotor UAVs for following ground moving targets. The UAV produced path is a smooth and flyable path suitable to dynamic environments with obstacles and can handle different motion profiles for the ground moving target including change in speed and direction. Additionally, the proposed path planning technique effectively supports UAVs following ground moving targets while maneuvering ahead and at a standoff distance from the target. It is hardware-independent where it can be used on most types of multirotor UAVs with an autopilot flight controller and basic sensors for distance measurements. The developed path planning technique is tested and validated against existing general potential field techniques for different simulation scenarios in ROS and gazebo-supported PX4-SITL. Simulation results show that the proposed D-APF is better suited for UAV path planning for following moving ground targets compared to existing general APFs. In addition, it outperforms the general APFs as it is more suitable for UAVs flying in environments with dynamic and unknown obstacles.
- 21 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 192760-192776
Open AccessA Dynamic Artificial Potential Field (D-APF) UAV Path Planning Technique for Following Ground Moving Targets
Path planning is a vital and challenging component in the support of Unmanned Aerial Vehicles (UAVs) and their deployment in autonomous missions, such as following ground moving target. Few attempts are reported in the literature on multirotor UAV path planning techniques for following ground moving targets despite the great improvement in their control dynamics, flying behaviors and hardware specifications. These attempts suffer several drawbacks including their hardware dependency, high computational requirements, inability to handle obstacles and dynamic environments in addition to their low performance regarding the moving target speed variations. In this paper, a novel dynamic Artificial Potential Field (D-APF) path planning technique is developed for multirotor UAVs for following ground moving targets. The UAV produced path is a smooth and flyable path suitable to dynamic environments with obstacles and can handle different motion profiles for the ground moving target including change in speed and direction. Additionally, the proposed path planning technique effectively supports UAVs following ground moving targets while maneuvering ahead and at a standoff distance from the target. It is hardware-independent where it can be used on most types of multirotor UAVs with an autopilot flight controller and basic sensors for distance measurements. The developed path planning technique is tested and validated against existing general potential field techniques for different simulation scenarios in ROS and gazebo-supported PX4-SITL. Simulation results show that the proposed D-APF is better suited for UAV path planning for following moving ground targets compared to existing general APFs. In addition, it outperforms the general APFs as it is more suitable for UAVs flying in environments with dynamic and unknown obstacles.
- 18 November 2015
- Published by Springer Nature
- p. 548-555
Activity and Flight Trajectory Monitoring of Mosquito Colonies for Automated Behaviour Analysis
- 18 November 2015
- Published by Springer Nature
- p. 548-555
Activity and Flight Trajectory Monitoring of Mosquito Colonies for Automated Behaviour Analysis
- 10 November 2015
- Published by Springer Nature
- p. 364-370
Optimal Feature Subset Selection for Neuron Spike Sorting Using the Genetic Algorithm
- 10 November 2015
- Published by Springer Nature
- p. 364-370
Optimal Feature Subset Selection for Neuron Spike Sorting Using the Genetic Algorithm
- 15 October 2014
- Published by Springer Nature
- p. 79-88
A Multiobjective State Transition Algorithm for Single Machine Scheduling
- 15 October 2014
- Published by Springer Nature
- p. 79-88
A Multiobjective State Transition Algorithm for Single Machine Scheduling
- 15 October 2014
- Published by Springer Nature
- p. 529-537
Complex Simulation of Stockyard Mining Operations
- 15 October 2014
- Published by Springer Nature
- p. 529-537
Complex Simulation of Stockyard Mining Operations
- 15 October 2014
- Published by Springer Nature
- p. 507-514
Intuitive Haptics Interface with Accurate Force Estimation and Reflection at Nanoscale
- 15 October 2014
- Published by Springer Nature
- p. 507-514
Intuitive Haptics Interface with Accurate Force Estimation and Reflection at Nanoscale