Amrish K. Panwar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Amrish K. Panwar has a total of 49 co-authors. Here are the top co-authors by number of shared publications:
Anchali Jain
Department of Applied Physics, Delhi Technological University, Delhi, India
5 shared publications- Mohammad Rizwan
Delhi Technological University
3 shared publications Pawan K. Tyagi
Department of Applied Physics, Delhi Technological University, Delhi, India
3 shared publicationsSharad Singh Jadaun
Department of Applied Physics, Delhi Technological University, Delhi, India
3 shared publicationsAnil Kumar
Department of Applied Chemistry, Delhi Technological University, Delhi, India
2 shared publications- Deepak Kumar
Centre of Excellence for Electric Vehicles and Related Technologies, Department of Electrical Engineering, Delhi Technological University, Delhi, India
2 shared publications
Latest Publications
- 2 September 2026
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 37 (25) , 1943
Investigation of structural and dielectric properties of LiAlSiO4 ceramic solid-state electrolyte for Li-ion batteries
- 2 September 2026
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 37 (25) , 1943
Investigation of structural and dielectric properties of LiAlSiO4 ceramic solid-state electrolyte for Li-ion batteries
- 12 February 2026
- Published by Springer Nature in Ionics
- Vol. 32 (3) , 2459-2482
Recent Advancements, Challenges, and Future Directions of Lithium-Sulfur Battery
- 12 February 2026
- Published by Springer Nature in Ionics
- Vol. 32 (3) , 2459-2482
Recent Advancements, Challenges, and Future Directions of Lithium-Sulfur Battery
- 12 January 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (2)
Quantitative resolution of grain boundary impedance in Ce-doped Li7La3Zr2O12 through the distribution of relaxation time analysis and electrochemical performance in quasi solid-state batteries
Li7La3Zr2O12 (LLZO) garnets have many characteristics that make these materials a good solid electrolyte for Li-ion batteries, but their poor interfacial properties and limited ionic conductivity continue to limit their widespread applications. In this study, Ce-doped LLZO has been comprehensively analyzed through x-ray diffraction (XRD), scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS), tunneling electron microscopy-energy dispersive spectroscopy (TEM-EDS), impedance spectroscopy with distribution of relaxation times, and testing of cell experimentally. XRD confirmed the dominant cubic phase with minor Ce-rich secondary phase, while SEM/TEM-EDS shows dense grains with flaky structure along with the homogeneous distribution of elements. Electrochemical testing of symmetric cell indicates lower polarization voltage and stability up to 700 h, while quasi solid-state battery with LiFePO4 as cathode leads to capacity retention of 72% after 24 cycles.
- 12 January 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (2)
Quantitative resolution of grain boundary impedance in Ce-doped Li7La3Zr2O12 through the distribution of relaxation time analysis and electrochemical performance in quasi solid-state batteries
Li7La3Zr2O12 (LLZO) garnets have many characteristics that make these materials a good solid electrolyte for Li-ion batteries, but their poor interfacial properties and limited ionic conductivity continue to limit their widespread applications. In this study, Ce-doped LLZO has been comprehensively analyzed through x-ray diffraction (XRD), scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS), tunneling electron microscopy-energy dispersive spectroscopy (TEM-EDS), impedance spectroscopy with distribution of relaxation times, and testing of cell experimentally. XRD confirmed the dominant cubic phase with minor Ce-rich secondary phase, while SEM/TEM-EDS shows dense grains with flaky structure along with the homogeneous distribution of elements. Electrochemical testing of symmetric cell indicates lower polarization voltage and stability up to 700 h, while quasi solid-state battery with LiFePO4 as cathode leads to capacity retention of 72% after 24 cycles.
- 6 January 2026
- Published by Springer Nature in Applied Physics A
- Vol. 132 (1) , 67
Impact of mixed phase 2D MoS2 nano-flowers like structure to enhance coulombic efficiency and electrochemical parameters as an alternative anode material
- 6 January 2026
- Published by Springer Nature in Applied Physics A
- Vol. 132 (1) , 67
Impact of mixed phase 2D MoS2 nano-flowers like structure to enhance coulombic efficiency and electrochemical parameters as an alternative anode material
- 24 December 2025
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 37 (1) , 50
Investigation on impedance, permittivity, and conduction mechanism of Li2MnO3 cathode for Li-ion battery
- 24 December 2025
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 37 (1) , 50
Investigation on impedance, permittivity, and conduction mechanism of Li2MnO3 cathode for Li-ion battery
- 1 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 62 (2) , 3009-3022
Towards Green AI: Energy-Efficient State of Health Estimation and Degradation Analysis of Commercial Lithium-Ion Batteries Based on Deep Learning and Filter Technique Approach
The redundant similar data points in the large datasets increase the dataset volume, storage, memory usage, training time, and computational resources, leading to significant inefficiency in the deep learning (DL) models. These inefficiencies reduce model performance and increase energy consumption. The existing DL-based approaches for state of health (SOH) estimation of lithium-ion batteries often face challenges such as high computational demands, low accuracy, and high energy consumption. These models require high energy for accurate results and contribute to higher electricity demand and carbon footprints. Therefore, this work proposes a novel filter technique (FT) based on the redundancy reduction approach. This approach improves the quality of the dataset, i.e., reduces dataset size, memory utilization, and energy consumption. This novel FT was incorporated with the gated recurrent unit (FT-GRU) model and tested on six different types of SOH datasets. The key objective of this approach is to enhance performance and lower energy consumption. A comparison examination was performed by proposed models configured with FT and traditional models to investigate the SOH estimation effectiveness and the model’s abilities and limits. The FT-GRU model was significantly tested on laboratory and publicly available NASA dynamic datasets, including B1, B2, B05, B06, B07 and B18. The B1 and B2 datasets were collected from our laboratory at room temperature. The FT-GRU approach achieved percentage improvements of 75.96% of RMSE, 99.49% of MSE, 93.07% of MAE, and computational time and energy consumption ranges from 25% to 70.76% and 69.50% to 82.38%, respectively, in comparison to the other existing approaches.
- 1 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 62 (2) , 3009-3022
Towards Green AI: Energy-Efficient State of Health Estimation and Degradation Analysis of Commercial Lithium-Ion Batteries Based on Deep Learning and Filter Technique Approach
The redundant similar data points in the large datasets increase the dataset volume, storage, memory usage, training time, and computational resources, leading to significant inefficiency in the deep learning (DL) models. These inefficiencies reduce model performance and increase energy consumption. The existing DL-based approaches for state of health (SOH) estimation of lithium-ion batteries often face challenges such as high computational demands, low accuracy, and high energy consumption. These models require high energy for accurate results and contribute to higher electricity demand and carbon footprints. Therefore, this work proposes a novel filter technique (FT) based on the redundancy reduction approach. This approach improves the quality of the dataset, i.e., reduces dataset size, memory utilization, and energy consumption. This novel FT was incorporated with the gated recurrent unit (FT-GRU) model and tested on six different types of SOH datasets. The key objective of this approach is to enhance performance and lower energy consumption. A comparison examination was performed by proposed models configured with FT and traditional models to investigate the SOH estimation effectiveness and the model’s abilities and limits. The FT-GRU model was significantly tested on laboratory and publicly available NASA dynamic datasets, including B1, B2, B05, B06, B07 and B18. The B1 and B2 datasets were collected from our laboratory at room temperature. The FT-GRU approach achieved percentage improvements of 75.96% of RMSE, 99.49% of MSE, 93.07% of MAE, and computational time and energy consumption ranges from 25% to 70.76% and 69.50% to 82.38%, respectively, in comparison to the other existing approaches.
- 13 August 2025
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 54 (10) , 8439-8447
Study of Lithium-Ion Diffusion Coefficients Through Analysis of CV and EIS for NiMn2O4 Alternate Anode Material in Lithium-Ion Batteries
- 13 August 2025
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 54 (10) , 8439-8447
Study of Lithium-Ion Diffusion Coefficients Through Analysis of CV and EIS for NiMn2O4 Alternate Anode Material in Lithium-Ion Batteries
- 11 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 61 (5) , 7633-7645
Towards Green AI: A Novel Hybrid Filter Based AI Approach for Energy Efficient State of Charge and Energy Estimation in Li-Ion Batteries Under Various Drive Cycles
Artificial intelligence models usually need a hefty dataset, which indeed requires more computational time, energy consumption, and laborious work to train the models to achieve accurate results. These models consume more energy to deliver output. Therefore, in this work proposes a novel filter technique (FT) based on an average reduction method. This approach improves the quality of the dataset, i.e., reduces volume and averages similar data to find the precision. This novel FT was incorporated with the convolutional neural network with bidirectional long short-term memory network (FT-CNN-Bi-LSTM) model and tested on four dynamic drive cycle circumstances. The key objective of this modelling technique is to enhance the performance and computational efficiency of the state of charge (SOC) and state of energy (SOE) of rechargeable battery systems such as lithium-ion batteries. A comparison examination was performed by proposed models configured with FT and traditional models, including FT-CNN, FT-LSTM, FT-BiLSTM, and FT-CNN-LSTM. The comparison examines SOC and SOE estimation efficacy and the model's capabilities and limitations. The FT-CNN-BiLSTM model was significantly tested on multiple dynamic drive cycles, including HWFET, LA92, UDDS, and US06. These drive cycle datasets were collected from our laboratory, where experiments were conducted at ambient temperature. The FT-CNN-Bi-LSTM approach achieved percentage improvements, 99.98% of RMSE, 99.97% of MSE, and 99.96% of MAE. The significant percentage improvement in computational time and energy consumption ranges from 59 to 66% and 61 to 68%. These results demonstrate superior efficiency for rapid SOC and SOE estimation in all dynamic drive cycles.
- 11 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 61 (5) , 7633-7645
Towards Green AI: A Novel Hybrid Filter Based AI Approach for Energy Efficient State of Charge and Energy Estimation in Li-Ion Batteries Under Various Drive Cycles
Artificial intelligence models usually need a hefty dataset, which indeed requires more computational time, energy consumption, and laborious work to train the models to achieve accurate results. These models consume more energy to deliver output. Therefore, in this work proposes a novel filter technique (FT) based on an average reduction method. This approach improves the quality of the dataset, i.e., reduces volume and averages similar data to find the precision. This novel FT was incorporated with the convolutional neural network with bidirectional long short-term memory network (FT-CNN-Bi-LSTM) model and tested on four dynamic drive cycle circumstances. The key objective of this modelling technique is to enhance the performance and computational efficiency of the state of charge (SOC) and state of energy (SOE) of rechargeable battery systems such as lithium-ion batteries. A comparison examination was performed by proposed models configured with FT and traditional models, including FT-CNN, FT-LSTM, FT-BiLSTM, and FT-CNN-LSTM. The comparison examines SOC and SOE estimation efficacy and the model's capabilities and limitations. The FT-CNN-BiLSTM model was significantly tested on multiple dynamic drive cycles, including HWFET, LA92, UDDS, and US06. These drive cycle datasets were collected from our laboratory, where experiments were conducted at ambient temperature. The FT-CNN-Bi-LSTM approach achieved percentage improvements, 99.98% of RMSE, 99.97% of MSE, and 99.96% of MAE. The significant percentage improvement in computational time and energy consumption ranges from 59 to 66% and 61 to 68%. These results demonstrate superior efficiency for rapid SOC and SOE estimation in all dynamic drive cycles.
- Open Access
A Novel Approach for State of Health Estimation of Lithium-Ion Batteries Based on Improved PSO Neural Network Model
The operation and maintenance of futuristic electric vehicles need accurate estimation of the state of health (SOH) of lithium-ion batteries (LIBs). To address this issue, a robust neural network framework is proposed to estimate the SOH. This article developed a novel approach that combines improved particle swarm optimization (IPSO) with bidirectional long short-term memory (Bi-LSTM) to effectively address the issue of precisely estimating SOH. The proposed IPSO-Bi-LSTM model is more effective than the other models for SOH estimation. This is because Bi-LSTM can capture both past and future appropriate information, making it more suitable for modeling complicated temporal sequences. The IPSO main objective is to optimize the model hyperparameters. To increase the model’s accuracy, the IPSO improves the parameters. The PSO-Bi-LSTM model performed better than the other approaches, according to experimental findings based on the NASA-PCOE battery dataset, and all of the SOH estimated outcomes, such as root mean square errors, were less than 0.50%. This result suggests that the proposed PSO-Bi-LSTM model has the ability to robustly estimate the SOH with a high accuracy.
Open AccessA Novel Approach for State of Health Estimation of Lithium-Ion Batteries Based on Improved PSO Neural Network Model
The operation and maintenance of futuristic electric vehicles need accurate estimation of the state of health (SOH) of lithium-ion batteries (LIBs). To address this issue, a robust neural network framework is proposed to estimate the SOH. This article developed a novel approach that combines improved particle swarm optimization (IPSO) with bidirectional long short-term memory (Bi-LSTM) to effectively address the issue of precisely estimating SOH. The proposed IPSO-Bi-LSTM model is more effective than the other models for SOH estimation. This is because Bi-LSTM can capture both past and future appropriate information, making it more suitable for modeling complicated temporal sequences. The IPSO main objective is to optimize the model hyperparameters. To increase the model’s accuracy, the IPSO improves the parameters. The PSO-Bi-LSTM model performed better than the other approaches, according to experimental findings based on the NASA-PCOE battery dataset, and all of the SOH estimated outcomes, such as root mean square errors, were less than 0.50%. This result suggests that the proposed PSO-Bi-LSTM model has the ability to robustly estimate the SOH with a high accuracy.
- Open Access
- 1 January 2024
- Published by CSIR-National Institute of Science Communication and Policy Research (NIScPR) in Indian Journal of Pure & Applied Physics
- Vol. 62 (2) , 116-123
The Effect of Multi-step Sintering on the density of Li7La3Zr1.75Ce0.25O12 as Solid State Electrolyte Material
The development of garnets structured Li7La3Zr2O12 (LLZO) have many amicable characteristics such as that make them good solid electrolytic materials for lithium-ion batteries. However, the poor interfacial properties and limited ionic conductivity continue to limit their wide range of applications. Hence, the current study has been focused on improving their ionic conductivity as well as the dense microstructure. This study demonstrates a simple and efficient method to produce compact ceramics with high Li+ conductivity using a multi-step sintering process. Therefore, garnet-structured oxides with the nominal chemical formula Li7La3Zr1.75Ce0.25O12 (LLZCO) have been produced. XRD and SEM characterization have been performed and confirmed the phase formation and microstructural analysis of the sample. Average crystallite size of the prepared LLZCO is calculated as 100 nm using scherrer formula from intense peaks of XRD pattern. Further, the ionic and electronic conductivities along with activation energies have been explored.
- 1 January 2024
- Published by CSIR-National Institute of Science Communication and Policy Research (NIScPR) in Indian Journal of Pure & Applied Physics
- Vol. 62 (2) , 116-123
Open AccessThe Effect of Multi-step Sintering on the density of Li7La3Zr1.75Ce0.25O12 as Solid State Electrolyte Material
The development of garnets structured Li7La3Zr2O12 (LLZO) have many amicable characteristics such as that make them good solid electrolytic materials for lithium-ion batteries. However, the poor interfacial properties and limited ionic conductivity continue to limit their wide range of applications. Hence, the current study has been focused on improving their ionic conductivity as well as the dense microstructure. This study demonstrates a simple and efficient method to produce compact ceramics with high Li+ conductivity using a multi-step sintering process. Therefore, garnet-structured oxides with the nominal chemical formula Li7La3Zr1.75Ce0.25O12 (LLZCO) have been produced. XRD and SEM characterization have been performed and confirmed the phase formation and microstructural analysis of the sample. Average crystallite size of the prepared LLZCO is calculated as 100 nm using scherrer formula from intense peaks of XRD pattern. Further, the ionic and electronic conductivities along with activation energies have been explored.