OFO. B. Fedotova

O. B. Fedotova

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


O. B. Fedotova has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Tensile and Structural Properties of Antioxidant- and CaCO3-Modified Polyethylene Films

    by Dmitry Myalenko, Olga Fedotova, Aleksandr Agarkov, Sergey Sirotin, Polina Poletaeva

    The demand for modified packaging materials increases annually. At the same time, there is growing interest in the development of functional packaging. The incorporation of modifiers, stabilizers, and fillers into polymer matrices can enhance the functionality of the material but may also negatively affect its safety. Polymers are susceptible to degradation, which negatively affects their strength and tensile properties under external factors (physical, chemical or environmental). Packaging containing antimicrobial and antioxidant agents is among the most promising, as it contributes to the product quality during storage. Films based on calcium carbonate (CaCO3) and dihydroquercetin (DHQ) remain insufficiently studied, despite their potential. Such materials are especially relevant for fatty products with a large contact surface area, including butter, cheese, and other solid high-fat foods. This study aimed to comprehensively investigate the structural and tensile properties of polyethylene films modified with varying contents of CaCO3 and DHQ. The films were produced via blown film extrusion using a laboratory extruder (SJ-28). Surface analysis was performed using scanning electron microscopy (SEM) and atomic force microscopy (AFM). Fourier-transform infrared (FTIR) spectroscopy was used to examine the film’s composition. The results showed that the introduction of more than 40.0 wt.% of CaCO3 into the polymer base affected the strength properties. The conducted studies of the physical and mechanical properties of LDPE film samples filled with CaCO3 showed significant changes in the samples containing more than 50.0 wt.% of the filler, with an increase in strength of more than 40.0%. The relative elongation at break after 50.0 wt.% decreased by more than 75.0%. These results indicate that to achieve the best strength properties for packaging materials, it is recommended to fill them to a maximum of 40.0 wt.%. The introduction of the antioxidant DHQ had almost no effect on the strength of the modified films. SEM analysis of films with high CaCO3 content and DHQ revealed visible antioxidant particles on the film surface, suggesting enhanced antioxidant potential at the interface between the film and dairy products. AFM analysis confirmed that a CaCO3 40.0 wt.% content altered the surface roughness and heterogeneity of the films. FTIR spectroscopy revealed that the incorporation of CaCO3 influenced the overall spectral profile of polyethylene, resulting in decreased peak intensities depending on the concentration of the filler. Based on these results, the modified polyethylene-based film with CaCO3 and DHQ shows potential for use as food packaging with antioxidant properties.


  • Open Access

    Study of the Tensile and Structural Properties of Antioxidant CaCO3-Modified Polyethylene Films

    by Dmitry Myalenko, Olga Fedotova, Aleksandr Agarkov, Sergey Sirotin, Polina Poletaeva

    The demand for modified packaging materials increases annually. At the same time, there is growing interest in the development of functional packaging. The incorporation of modifiers, stabilizers, and fillers into polymer matrices can enhance the functionality of the material but may also negatively affect its safety. Polymers are susceptible to degrada-tion, which negatively affects their strength and tensile properties under external factors (physical, chemical or environmental). Packaging containing antimicrobial and antioxi-dant agents is among the most promising, as it contributes to the product quality during storage. Films based on calcium carbonate (CaCO₃) and dihydroquercetin (DHQ) remain insufficiently studied, despite their potential. Such materials are especially relevant for fatty products with a large contact surface area, including butter, cheese, and other solid high-fat foods. Butter is often packaged under conditions that allow oxygen exposure, which initiates oxidative degradation on the surface. Antimicrobial and antioxidant agents in packaging can prevent oxidation. This study aimed to comprehensively inves-tigate the structural and tensile properties of polyethylene films modified with varying contents of CaCO₃ and DHQ. The films were produced via blown film extrusion using a laboratory extruder (SJ-28). Surface analysis was performed using scanning electron mi-croscopy (SEM) and atomic force microscopy (AFM). Fourier-transform infrared (FTIR) spectroscopy was used to examine the film's composition. Based on the results, the modi-fied polyethylene-based film with CaCO₃ and DHQ shows potential for use as food pack-aging with antioxidant properties. The obtained film demonstrated stability of tensile properties, which supports its suitability for reducing the risk of micro- and nanoplastic migration into food during storage.

  • Open Access

    The development of a modified packaging material with antioxidant properties and the study of its sanitary and hygienic characteristics

    by Dmitry Mikhailovich Myalenko, Ольга Борисовна Федотова, Aleksandr Aleksandrovich Agarkov, Sergey Sergeevich Sirotin, Дмитрий Михайлович Мяленко

    Introduction: The development and use of modified polyolefin films as packaging materials is a promising direction for the improvement of modern food packaging, particularly dairy products. By targeted modification, it is possible to create an "active package" that has a set of desired properties. For example, the packaging can contain substances with antimicrobial or antioxidant effects that are activated when the packaged product comes into contact with them.Purpose: This study aims to investigate the effect of adding calcium carbonate to a polyethylene film and antioxidant dihydroquercetin on its sanitary and hygiene properties.Materials and methods: The objects of research were samples of developed film filled with calcium carbonate (CaCO3) and dihydroquercetin (DKV), which were selected. The development and production of the materials was carried out on an experimental site using an SJ-28 laboratory extruder. Samples of film were produced using a pre-prepared super concentrate. Sanitary, chemical, and organoleptic tests were performed in accordance with TRTS 005/2011 “On Packaging Safety” and GOST 34174-2017, as well as instructions from the Ministry of Health, MI 880-71.Results: Using the methodology of combining polymer bases, mineral and organic fillers in a melt, it was possible to produce a modified film packaging material. An algorithm for the technology was proposed and modes for obtaining samples with different contents of injected substances were worked out. Organoleptic and sanitary-chemical tests of the obtained samples confirmed their sanitary and hygiene safety at selected filler concentrations and extrusion conditions.Conclusions: The data obtained on the production of filled modified films showed the technological suitability of the chosen method, mode, and component composition. Comprehensive organoleptic and chemical-sanitary tests have shown the absence of excessive odor and the lack of migration of low-molecular-weight substances and oxidation products in model media.


  • Open Access

    The Ultraviolet Radiation Influence on the Physical-Mechanical and Structural Characteristics of a Biodegradable Polymeric Material Based on Polylactide and Poly(butylene adipate-co-terephthalate) during Compost Storage

    by Dmitriy Mikhailovich Myalenko, Ольга Борисовна Федотова, Aleksand Aleksandrovich Agarkov, Дмитрий Михайлович Мяленко

    Исследование влияния ультрафиолетового излучения на физико-механические и структурные характеристики биоразлагаемого полимерного материала на основе полилактида и поли(бутиленадипат-ко-терефталата) при компостном хранении


  • Open Access

    Physical, Mechanical, and Structural Properties of the Polylactide and Polybutylene Adipate Terephthalate (PBAT)-Based Biodegradable Polymer during Compost Storage

    by Dmitry Myalenko, Olga Fedotova

    Today, packaging is an integral part of any food product, preserving its quality and safety. The use of biodegradable packaging as an alternative to conventional polymers reduces the consumption of synthetic polymers and their negative impacts on the environment. The purpose of this study was to analyze the properties of a biodegradable compound based on polylactide (PLA) and polybutylene adipate terephthalate (PBAT). Test samples were made by blown extrusion. The structural, physical, and mechanical properties of the PLA/PBAT material were studied. The property variations during compost storage in the lab were monitored for 365 days. The physical and mechanical properties were measured in accordance with the GOST 14236-2017 (ISO 527-2:2012) standard. We measured the tensile strength and elongation at rupture. We used attenuated total reflectance Fourier transform infrared microscopy (ATR-FTIR) to analyze the changes in the material structure. This paper presents a comparative analysis of the strengths of a biodegradable material and grade H polyethylene film (manufactured to GOST 10354-82). PLA/PBAT’s longitudinal and transverse tensile strengths are 14.08% and 32.59% lower than those of LDPE, respectively. Nevertheless, the results indicate that, given its physical and mechanical properties, the PLA/PBAT material can be an alternative to conventional PE film food packaging. The structural study results are in good agreement with the physical and mechanical tests. Micrographs clearly show the surface deformations of the biodegradable material. They increase with the compost storage duration. The scanning microscopy (SEM) surface analysis of the original PLA/PBAT films indicated that the PLA structure is similar to that of a multilayer shell or sponge, which is visible at medium and especially high magnification. We conclude that PLA/PBAT-based biodegradable materials are potential substitutes for conventional PE polymer films.


  • Ultrafiolet. Theory and practice of application in the dairy industry

    by All-Russian Dairy Research Institute, D.M. Myalenko, O.B. Fedotova, K.A. Ryazantseva, N.E. Sherstneva, E.Yu. Agarkova

    УДК 637.1 ББК 36.95 Р 120 Мяленко, Д. М. Ультрафиолет. Теория и практика применения в молочной промышленности: монография / Д. М. Мяленко, О. Б. Федотова, К. А. Рязанцева, Н. Е. Шерстнева, Е. Ю. Агаркова. – М.: ВНИМИ, 2023. – 120 с. DOI: 10.37442/978-5-6049465-4-1 ISBN 978-5-6049465-4-1


  • Open Access

    Microscopic and Structural Studies of an Antimicrobial Polymer Film Modified with a Natural Filler Based on Triterpenoids

    by Olga Fedotova, Dmitry Myalenko, Nataliya Pryanichnikova, Elena Yurova, Evgeniya Agarkova

    The aspects of component visualization of the antimicrobial triterpenoids (betulin) additive, both on the surface and in the bulk of the polymer, constituting food film packaging, are considered. This paper presents new knowledge about the morphology and surface structure of modified films using three independent methodological approaches: optical microscopy; a histological method adapted to packaging materials; and a method of attenuated total internal reflection (ATR) spectroscopy in the infrared region with Fourier transform. The use of these methods shows the betulin granules, individual or forming chains. To visualize the antimicrobial additive in the polymer bulk, a modified histological method adapted for film materials and attenuated total internal reflection (ATR) spectroscopy in the infrared region were used with Fourier transform using a Lumos Bruker microscope (Germany) (ATR crystal based on germanium). Sample sections were analyzed using Leica 818 blades at an angle of 45 degrees. The histological method consists of the study of a biological object thin section, in the transmitted light of a microscope, stained with contrast dyes to reveal its structures, and placed on a glass slide. In the method modified for the present study, instead of a biological one, a synthetic object was used, namely the developed film materials with the addition of natural organic origin. Individual granules are about 2 µm long; chains can be up to 10 µm long. The thickness of the granules ranged from 1 to 1.5 microns. It can be seen that the depth distribution of granules in the film from the inner surface to the outer one is rather uniform. Spectroscopic studies using the method of automatic ATR mapping in the region of 880 cm−1 made it possible to evaluate the distribution of an antimicrobial additive based on triterpenoids on the surface and in the polymer bulk.


  • Open Access

    Research of the polyethylene packaging layer structure change in contact with a food product at exposure to ultraviolet radiation

    by O. B. Fedotova, N. S. Pryanichnikova

    The sanitary and hygienic safety of modern packaging is determined by the layer of packaging material in direct contact with the food product. This layer in most cases is a synthetic polymer of the polyolefin class — low density polyethylene. This material is used as a stand-alone packaging and in multilayer and combined packaging materials. During thermal and photooxidation, compounds can form in it that negatively affect the safety of the package, which can migrate into the product. Food technologies use methods of disinfecting packaging materials and packaging before filling or bottling products. These methods include ultraviolet irradiation of the surface, which has a bactericidal effect. Using spectral methods of analysis, researches have been carried out on changes in the polyethylene layers structure in the film’s composition, multilayer films and combined packaging materials when exposed to pulsed ultraviolet radiation in a wide spectral range (irradiation with a pulsed xenon lamp). Deformations of polyethylene macromolecules chemical bonds on the surface and boundary layers under the influence of pulsed UV-irradiation have been revealed. The IR spectra of ATR (Attenuated Total Reflection) were obtained, the analysis of which showed that the monofilm is subject to the greatest destructive effect, as evidenced by the appearance of characteristic absorption bands responsible for the formation of aldehyde, ketone groups, as well as for the polymer chain termination. It is shown that the use of food soot in the composition of multilayer packaging films blocks their photo destruction. Upon irradiation of a combined material based on cardboard intended for bottling milk, an absorption band was found in the spectra, which is responsible for the onset of the destruction process with the formation of aldehyde and carboxylate groups with the formation of aldehyde and carboxylate groups.Comparison of changes in structure in three different packaging objects containing a polyethylene layer shows the feasibility and necessity of using combined and multilayer materials for food products packaging, in which, even under extreme UV-irradiation, there are practically no photo destruction processes, which is confirmed by spectral researches.


  • Fermented Milk Products and Child Health

    by A. I. Khavkin, T. A. Kovtun, D. V. Makarkin, O. B. Fedotova

    The probiotic fermented milk products hold a specific place in the children diet. As a rule, the pediatricians, when advising the parents, are guided by the characteristics of both strains used as the ferment and the probiotic strains included into the food product. It is important that the microorganisms are safe, shelf stable and able to survive in the gastrointestinal tract. The use of the probiotic fermented milk products has a positive effect on the child health, as follows: anti-infectious and immunomodulatory effects, it helps to normalize the motion of the gastrointestinal tract. These provisions shall be supported with the controlled studies.


  • Probiotic fermented dairy products – food or medication?

    by A.I. Khavkin, T.A. Kovtun, D.V. Makarkin, O.B. Fedotova, Moscow Jsc «Progress»

    One of the main strategies for preventing chronic diseases is a balanced diet from early childhood, with the inclusion of functional ingredients: dietary fiber, vitamins and vitamin-like compounds, minerals, polyunsaturated fatty acids, prebiotics and probiotics. A combined enrichment of fermented dairy products with prebiotics and probiotics contributes to the summation of their positive effective influence. Adding prebiotics and probiotics to the diet leads to the change in the intestinal microbiota composition towards a more balanced structure, thereby increasing the intestinal barrier function and the formation of optimal immune interactions. The most commonly used in human nutrition is a combination of bifidobacteria or lactobacilli with fructo-oligosaccharides in synbiotic products. It is important that the microorganisms are safe, stable in storage and able to survive in the gastrointestinal tract. The use of probiotic fermented dairy products has a positive impact on child health: it has anti-infectious and immunomodulatory effects, helps to normalize the gastrointestinal motility. These statements are confirmed by controlled studies in which children aged 8 to 18 months, recovering from acute respiratory disease, for which antibiotic therapy was prescribed, included in the diet drinking yoghurts enriched with Bifidobacterium lactis BB12 and inulin for 3 months. The inclusion of yoghurts in the children’s diet helped to normalize the intestinal microbiota composition after antibiotic therapy, as well as to strengthen the immune system by stimulating the synthesis of protective factors – secretory immunoglobulin A and lysozyme. Key words: fermented dairy products, child nutrition, probiotics, prebiotics, synbiotics, inulin, microbiota, functional foods, immune system, Bifidobacterium lactis BB12