HLHang Lin

Hang Lin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hang Lin has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A Patch Rectenna With an Integrated Impedance Matching Network and a Harmonic Recycling Filter

    by Zongyang Dan, Zhongqi He, Hang Lin, Changjun Liu

    A new compact patch rectenna is presented in this letter. It consists of a rectangular patch antenna, a Schottky diode, and a harmonic filter with impedance matching to improve the rectifying efficiency. The filter is realized by a series short-ended one-eighth-wavelength microstrip transmission line, which also balances the capacitive impedance of the diode. The impedances of the diode and patch antenna are matched well by tuning the patch antenna and short-ended transmission line. A meander line is used to build a dc output path. For validation, a rectenna working at 2.45 GHz is designed, manufactured, and measured. A maximum rectifying efficiency of 82.2% is realized when the dc load is 400 Ω at an input power of 22.5 dBm. The proposed patch rectenna has potential applications such as rectenna arrays in wireless power transmission.


  • Compact High-Efficiency Broadband Rectifier Based on Coupled Transmission Line

    by Haoming He, Hang Lin, Pengde Wu, Qi Li, Changjun Liu

    In this brief, a compact high-efficiency broadband rectifier with an extended range of input power is proposed for the applications in wireless energy harvesting (EH). In the rectifier, a coupled transmission line is connected in series with a Schottky diode to compensate its capacitive reactance, compress its impedance variation when the frequency or input power varies. The coupled transmission line facilitates the impedance matching circuit and reduces the insertion loss. High RF-dc conversion efficiency will be achieved consequently. A rectifier is fabricated and measured based on analysis and simulation on the coupled transmission line. The measured results show a good agreement with the simulation results. The rectification efficiency of the rectifier is over 70 % from 1.6 to 2.8 GHz (a bandwidth of 54.5%) with the input power range from 11 to 14 dBm. The efficiency remains above 50% from 1.5 to 2.85 GHz with input power from 5 to 18 dBm,and over 40% within 1.7–2.8 GHz when the input power decreases to 0 dBm. The maximum measured efficiency is 78.63% at an input power of 16 dBm.


  • Compact Patch Rectennas Without Impedance Matching Network for Wireless Power Transmission

    by Changjun Liu, Hang Lin, Zhongqi He, Zhizhang Chen

    In microwave wireless power receivers, impedance matching networks can maximize power transmission from RF to dc. However, they require circuit components and physical space to implement. To circumvent the problem, we present two compact patch rectennas that do not require matching networks. They comprise a patch antenna and rectifying Schottky diodes which are mounted on the ground plane and connected to the patch antenna through metallic vias. The positions of the vias are chosen in such a way that the input impedance of the antenna and that of the rectifying units are conjugately matched. The two rectenna types are all fabricated and tested: one with one rectifying unit and the other with double rectifying units, respectively. Measurements show that the rectenna with the single rectifying unit has the peak RF-dc conversion efficiency of 77% at 2.45 GHz and the dynamic power range (>60%) is 10 dB. The rectenna with the double rectifying units has the peak conversion efficiency of 74.14% at 2.45 GHz and the dynamic power range (>60%) is 10 dB. Both rectennas are good candidates for integrated microwave wireless power receivers due to the removal of the impedance matching networks and the suppression of harmonic components.


  • Wide Input Power Range X-Band Rectifier With Dynamic Capacitive Self-Compensation

    by Hang Lin, Xiaojie Chen, Zhongqi He, Yuyang Xiao, Wenquan Che, Changjun Liu

    A microwave rectifier composed of a pair of Schottky diodes with dynamic capacitive self-compensation is proposed in this letter. The impedance of a Schottky diode usually varies with the input power. A method using paired diodes for capacitive self-compensation is presented to enhance the rectifier's dynamic power range. The imaginary part of one diode's impedance is compensated using another identical diode with a section of transmission line by impedance transforming. The proposed method reduces the effect of the input power on the diode impedance. An X-band rectifier using a pair of HSMS-286 Schottky diodes based on the proposed method is designed and fabricated. This rectifier, with a dc load of 300 Ω, achieves power conversion efficiency of 64.5% at 9.7 GHz and has a 15.3-dB input power dynamic range with efficiency exceeding 50%. The rectifier is expected to be used in wireless power transmission systems with flexible distance requirements.


  • A Novel Class-C Rectifier With High Efficiency for Wireless Power Transmission

    by Zhongqi He, Hang Lin, Changjun Liu

    In this letter, a compact Class-C rectifier with high efficiency based on a novel structure was proposed for wireless power transmission (WPT). This structure is connected to the rectifying diode in parallel. It presents infinite impedance at the output port at the fundamental frequency for impedance matching and zero impedance at the high harmonic frequencies. An open-end 12th wavelength microstrip line and a short-end quarter wavelength microstrip line are applied in this design. For fabricated, a radio frequency (RF) rectifier operating at 2.45 GHz was designed and tested. The measurement results show that the maximum RF-dc conversion efficiency is 82.7% at 25 dBm. Moreover, the proposed rectifier is compact with the size of 0.35λg x 0.13λg.


  • A Compact High-Efficiency Rectifier With a Simple Harmonic Suppression Structure

    by Zhongqi He, Hang Lin, Huacheng Zhu, Changjun Liu

    In this letter, a compact high-efficiency radio frequency (RF) rectifier based on a series harmonic suppression structure is proposed for wireless power transmission (WPT). The proposed structure removes the cascading bandpass between the RF source and the diode, and the dc-pass filter between the diode and the dc load, simultaneously. The harmonic suppression structure consists only of a short-ended eighth-wavelength microstrip line, which shows an inductive impedance to compensate the rectifying diode's capacitive impedance at fundamental frequency and changes to open circuit to reflect the second harmonic for rectifying again. Two Schottky diodes are used in this design for voltage-doubling rectifying. For fabrication, a rectifier operating at 2.45 GHz was designed, fabricated, and tested. The measurement results show that the maximum RF-dc conversion efficiency is over 80% at 25 dBm. Meanwhile, the fabricated rectifying is compact with 20 mm x 5 mm.


  • Codesign of a Schottky Diode's and Loop Antenna's Impedances for Dual-Band Wireless Power Transmission

    by Zhongqi He, Hang Lin, Changjun Liu

    In this letter, we proposed a simple design method of rectenna for dual-band wireless power transmission (WPT). This method introduces a co-design of a Schottky's diode and antenna's impedance at 2.45 GHz and 5.8 GHz, which are conjugate matching, respectively. One example shows the design. The rectifying diode presents capacitive impedance, and inductive impedance can be given by a loop antenna through optimization. A Schottky diode is directly connected into the dual-band antenna. An uncomplicated structure is achieved without additional matching network and filtering. For validation, a rectenna working at 2.45 GHz and 5.8 GHz was designed, fabricated, and tested. The measurement results show that a maximum conversion efficiency of 70% with a load resistance of 400 was realized at 2.45 GHz. At 5.8 GHz, the peak efficiency is 61.5% with a load resistance of 200. This rectenna can be used to charge electronic devices, such as wireless sensors.