Diego Lorente
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Diego Lorente has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Hector Esteban
Instituto de Telecomunicaciones y Aplicaciones Multimedia, Universitat Politcnica de Valncia, Valencia, Spain
3 shared publications - Vicente Enrique Boria
Universitat Politècnica de València
3 shared publications - Bernd Gabler
Microwaves and Radar Institute, German Aerospace Center (DLR), Wessling, Germany
2 shared publications - Markus Limbach
German Aerospace Center, Microwave and Radar Institute, Oberpfaffenhofen, Germany
2 shared publications Markus Limbach
German Aerospace Center, Microwaves and Radar Institute, SAR-Technology, 82234 Weßling, Germany
1 shared publication
Latest Publications
- Open Access
- 25 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 435-449
Highly Integrated Low-Profile Multilayer Dual-Polarized Phased Array Antenna With Truncated Cavities for First Pulsed Bistatic L-Band Airborne SAR Sensor
Synthetic Aperture Radar (SAR) has become, nowadays, one of the most important techniques in remote-sensing, and the increasing interest in Earth monitoring reinforces this trend. Next generation SAR sensors will enhance the radar resolution capabilities by means of digital beamforming (DBF) techniques along with multistatic systems. In order to support the technological development of future spaceborne SAR missions, airborne sensors become an essential scope of research. Thereby, future airborne SAR systems demand enhanced DBF capabilities that involve phased array antennas with a high density of array elements. However, the antenna aperture size is significantly limited in airborne applications, which leads to low-profile and highly integrated antenna solutions, becoming a more challenging task for lower frequency operations such as L-band. In this work, a compact L-band dual-polarized multilayer phased array antenna with beam steering in elevation, developed for the next generation German Aerospace Center (DLR) airborne SAR system, is presented. The proposed design makes use of truncated cavities to improve the array element isolation, and provides 66% more antenna elements than the previous L-band phased array of the current DLR airborne SAR sensor with the same antenna aperture size. Measurements of a manufactured prototype show an antenna bandwidth of almost 20%, matching levels better than 17 dB, up to 15 dB gain and cross-polarization suppression values higher than 35 dB. Thus, the proposed work will allow the application of advanced DBF techniques in the upcoming first pulsed bistatic L-band airborne SAR sensor.
- 25 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 435-449
Open AccessHighly Integrated Low-Profile Multilayer Dual-Polarized Phased Array Antenna With Truncated Cavities for First Pulsed Bistatic L-Band Airborne SAR Sensor
Synthetic Aperture Radar (SAR) has become, nowadays, one of the most important techniques in remote-sensing, and the increasing interest in Earth monitoring reinforces this trend. Next generation SAR sensors will enhance the radar resolution capabilities by means of digital beamforming (DBF) techniques along with multistatic systems. In order to support the technological development of future spaceborne SAR missions, airborne sensors become an essential scope of research. Thereby, future airborne SAR systems demand enhanced DBF capabilities that involve phased array antennas with a high density of array elements. However, the antenna aperture size is significantly limited in airborne applications, which leads to low-profile and highly integrated antenna solutions, becoming a more challenging task for lower frequency operations such as L-band. In this work, a compact L-band dual-polarized multilayer phased array antenna with beam steering in elevation, developed for the next generation German Aerospace Center (DLR) airborne SAR system, is presented. The proposed design makes use of truncated cavities to improve the array element isolation, and provides 66% more antenna elements than the previous L-band phased array of the current DLR airborne SAR sensor with the same antenna aperture size. Measurements of a manufactured prototype show an antenna bandwidth of almost 20%, matching levels better than 17 dB, up to 15 dB gain and cross-polarization suppression values higher than 35 dB. Thus, the proposed work will allow the application of advanced DBF techniques in the upcoming first pulsed bistatic L-band airborne SAR sensor.
- Open Access
- 8 April 2021
- Published by MDPI AG in Remote Sensing
- Vol. 13 (8) , 1430
Sequential 90° Rotation of Dual-Polarized Antenna Elements in Linear Phased Arrays with Improved Cross-Polarization Level for Airborne Synthetic Aperture Radar Applications
In this work, a novel rotation approach for the antenna elements of a linear phased array is presented. The proposed method improves by up to 14 dB the cross-polarization level within the main beam by performing a sequential 90° rotation of the identical array elements, and achieving measured cross-polarization suppressions of 40 dB. This configuration is validated by means of simulation and measurements of a manufactured linear array of five dual-polarized cavity-box aperture coupled stacked patch antennas operating in L-Band, and considering both uniform amplitude and phase distribution and beamforming with amplitude tapering. The analysis is further extended by applying and comparing the proposed design with the 180° rotation and non-rotation topologies. This technique is expected to be used for the next generation L-Band Airborne Synthetic Aperture Radar Sensor of the German Aerospace Center (DLR).
- 8 April 2021
- Published by MDPI AG in Remote Sensing
- Vol. 13 (8) , 1430
Open AccessSequential 90° Rotation of Dual-Polarized Antenna Elements in Linear Phased Arrays with Improved Cross-Polarization Level for Airborne Synthetic Aperture Radar Applications
In this work, a novel rotation approach for the antenna elements of a linear phased array is presented. The proposed method improves by up to 14 dB the cross-polarization level within the main beam by performing a sequential 90° rotation of the identical array elements, and achieving measured cross-polarization suppressions of 40 dB. This configuration is validated by means of simulation and measurements of a manufactured linear array of five dual-polarized cavity-box aperture coupled stacked patch antennas operating in L-Band, and considering both uniform amplitude and phase distribution and beamforming with amplitude tapering. The analysis is further extended by applying and comparing the proposed design with the 180° rotation and non-rotation topologies. This technique is expected to be used for the next generation L-Band Airborne Synthetic Aperture Radar Sensor of the German Aerospace Center (DLR).
- 28 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 30 (12) , 1137-1140
Compact Ultrawideband Grounded Coplanar Waveguide to Substrate Integrated Waveguide Tapered V-Slot Transition
In this work, a new ultrawideband grounded coplanar waveguide (GCPW) to substrate integrated waveguide transition is presented. The proposed design improves the performance of the triangular tapered slot transition, by providing a return loss level better than 28 dB in the X-band frequency range (with enhancements of up to 29 dB at higher frequencies in such a band) and a flatter response for the insertion losses. The analysis of the new transition is performed using a dielectric material with high permittivity (εr=9.8), which leads to an extremely compact implementation. In order to validate the proposed design, several back-to-back transitions with different lengths were manufactured, measured, and compared with the simulated data. Further experimental results, after performing an additional thru-reflect-line calibration for deembedding undesired effects of involved connectors, are also shown.
- 28 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 30 (12) , 1137-1140
Compact Ultrawideband Grounded Coplanar Waveguide to Substrate Integrated Waveguide Tapered V-Slot Transition
In this work, a new ultrawideband grounded coplanar waveguide (GCPW) to substrate integrated waveguide transition is presented. The proposed design improves the performance of the triangular tapered slot transition, by providing a return loss level better than 28 dB in the X-band frequency range (with enhancements of up to 29 dB at higher frequencies in such a band) and a flatter response for the insertion losses. The analysis of the new transition is performed using a dielectric material with high permittivity (εr=9.8), which leads to an extremely compact implementation. In order to validate the proposed design, several back-to-back transitions with different lengths were manufactured, measured, and compared with the simulated data. Further experimental results, after performing an additional thru-reflect-line calibration for deembedding undesired effects of involved connectors, are also shown.