David Baumgartner
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
David Baumgartner has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Carole Planchette
Institute of Fluid Mechanics and Heat Transfer, Graz University of Technology, Graz, Austria
5 shared publications - Günter Brenn
Institute of Fluid Mechanics and Heat Transfer, Graz University of Technology, 8010 Graz, Austria
3 shared publications Günter Brenn
2 shared publications- Bernhard Weigand
Institute of Aerospace Thermodynamics (ITLR), University of Stuttgart, Stuttgart, Germany
1 shared publication Carole Planchette
Graz University of Technology
1 shared publication- Francesco Marangon
Graz University of Technology, Institute of Railway Infrastructure Design, Graz, Austria
1 shared publication
Latest Publications
- Open Access
- 2 May 2023
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 19 (5) , 054006
In-Air Microfluidic Strategy for the Production of Sodium Alginate Fibers with Regular Inclusions at Very High Throughput
Scalable technologies for the production of biocompatible complex microfibers of controllable size and composition at competitively high throughput are urgently needed in order to meet the growing demand for such microstructures in pharmaceutical and biomedical applications. Here, we introduce an in-air microfluidic strategy with throughput greater than ml (corresponding to more than m of fiber per hour). The microfibers of uniform diameter have regular inclusions, which can potentially be used for encapsulating cells into a protecting and nutrient environment, or for finely tuning the release of various actives at individualized doses. With the help of a recently developed prototype, we test seven different liquid combinations and obtain seven types of fibers, whose average “dry” diameter ranges between and . The principle of our approach is to solidify the complex liquid structures generated by the controlled collisions of a drop stream with a continuous liquid jet, in air, via ionic cross-linking. After the stream of water-based droplets, which constitute the inclusions, collides in-air with the alginate-based jet (jet 1), the generated drops-in-jet compound is brought into contact with a second jet (jet 2) containing divalent cations ( or ) to initiate the solidification. Finally, the fibers are collected “on the fly” via a horizontal spinning plate, allow to dry (i.e., to fully equilibrate under controlled conditions), and characterized by their elongation at break and Young’s modulus.- 2 May 2023
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 19 (5) , 054006
Open AccessIn-Air Microfluidic Strategy for the Production of Sodium Alginate Fibers with Regular Inclusions at Very High Throughput
Scalable technologies for the production of biocompatible complex microfibers of controllable size and composition at competitively high throughput are urgently needed in order to meet the growing demand for such microstructures in pharmaceutical and biomedical applications. Here, we introduce an in-air microfluidic strategy with throughput greater than ml (corresponding to more than m of fiber per hour). The microfibers of uniform diameter have regular inclusions, which can potentially be used for encapsulating cells into a protecting and nutrient environment, or for finely tuning the release of various actives at individualized doses. With the help of a recently developed prototype, we test seven different liquid combinations and obtain seven types of fibers, whose average “dry” diameter ranges between and . The principle of our approach is to solidify the complex liquid structures generated by the controlled collisions of a drop stream with a continuous liquid jet, in air, via ionic cross-linking. After the stream of water-based droplets, which constitute the inclusions, collides in-air with the alginate-based jet (jet 1), the generated drops-in-jet compound is brought into contact with a second jet (jet 2) containing divalent cations ( or ) to initiate the solidification. Finally, the fibers are collected “on the fly” via a horizontal spinning plate, allow to dry (i.e., to fully equilibrate under controlled conditions), and characterized by their elongation at break and Young’s modulus. - Open Access
- 22 February 2022
- Published by Elsevier in International Journal of Multiphase Flow
- Vol. 150
Viscoelastic effects probed by drop-jet collisions
- 22 February 2022
- Published by Elsevier in International Journal of Multiphase Flow
- Vol. 150
Open AccessViscoelastic effects probed by drop-jet collisions
- Open Access
- 22 February 2022
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 937, R1
Universality of stretching separation
We develop a model to predict the fragmentation limit of drops colliding off-centre. The prediction is excellent over a wide range of liquid properties and it can be used without adjusting any parameter. The so-called stretching separation is attributed to the extension of the merged drop above a critical aspect ratio of 3.25. The evolution of this aspect ratio is influenced by the liquid viscosity and can be interpreted via an energy balance. This approach is then adapted to drop–jet collisions, which we model as consecutive drop–drop collisions. The fragmentation criterion is similar to that observed for drop–drop collisions, while the evolution of the stretched jet aspect ratio is modified to account for the different flow fields and geometry.
- 22 February 2022
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 937, R1
Open AccessUniversality of stretching separation
We develop a model to predict the fragmentation limit of drops colliding off-centre. The prediction is excellent over a wide range of liquid properties and it can be used without adjusting any parameter. The so-called stretching separation is attributed to the extension of the merged drop above a critical aspect ratio of 3.25. The evolution of this aspect ratio is influenced by the liquid viscosity and can be interpreted via an energy balance. This approach is then adapted to drop–jet collisions, which we model as consecutive drop–drop collisions. The fragmentation criterion is similar to that observed for drop–drop collisions, while the evolution of the stretched jet aspect ratio is modified to account for the different flow fields and geometry.
- Open Access
- 15 December 2020
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 908
Miscibility and wettability: how interfacial tension influences droplet impact onto thin wall films
The influence of miscibility and liquid wettability during droplet impact onto thin wall films is investigated experimentally. Despite similar liquid properties and impact conditions, differences in the splashing limit, in the crown extension and in the duration of the ascending phase are observed. These differences are related to the interfacial tension of the droplet/wall-film liquid pairs, which is linked to their miscibility and wettability. More precisely, by calculating the crown surface energy, we show that the energy stored in the interface between droplet and wall film (if any) is not negligible and leads to smaller crown extensions and tendentially the need for more kinetic energy to initiate splashing. Similarly, by calculating a modified capillary time taking into account all surface and interfacial tensions, we show that the interfacial tension acts as a non-negligible recoiling force, which reduces the duration of the ascending phase. The dynamics of this ascending phase is well captured for different wall-film thicknesses if accounting for the variations of the liquid masses in movement. Overall, droplet/wall-film interactions can be seen as inertio-capillary systems where the interfacial tension between droplet and wall film plays a significant role in the storage of energy and in the crown kinetics during the impact process. In addition, this analysis highlights that viscous losses have already a significant effect during the crown extension phase, by dissipating almost half of the initial energies for droplet impact onto thin wall films, and most likely by influencing the capillary time scale through damping.
- 15 December 2020
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 908
Open AccessMiscibility and wettability: how interfacial tension influences droplet impact onto thin wall films
The influence of miscibility and liquid wettability during droplet impact onto thin wall films is investigated experimentally. Despite similar liquid properties and impact conditions, differences in the splashing limit, in the crown extension and in the duration of the ascending phase are observed. These differences are related to the interfacial tension of the droplet/wall-film liquid pairs, which is linked to their miscibility and wettability. More precisely, by calculating the crown surface energy, we show that the energy stored in the interface between droplet and wall film (if any) is not negligible and leads to smaller crown extensions and tendentially the need for more kinetic energy to initiate splashing. Similarly, by calculating a modified capillary time taking into account all surface and interfacial tensions, we show that the interfacial tension acts as a non-negligible recoiling force, which reduces the duration of the ascending phase. The dynamics of this ascending phase is well captured for different wall-film thicknesses if accounting for the variations of the liquid masses in movement. Overall, droplet/wall-film interactions can be seen as inertio-capillary systems where the interfacial tension between droplet and wall film plays a significant role in the storage of energy and in the crown kinetics during the impact process. In addition, this analysis highlights that viscous losses have already a significant effect during the crown extension phase, by dissipating almost half of the initial energies for droplet impact onto thin wall films, and most likely by influencing the capillary time scale through damping.
- 28 October 2020
- Published by American Physical Society (APS) in Physical Review Fluids
- Vol. 5 (10) , 103602
Effects of viscosity on liquid structures produced by in-air microfluidics
This paper experimentally investigates the effect of viscosity on the outcomes of collisions between a regular stream of droplets and a continuous liquid jet. A broad variation of liquid viscosity of both the drop and the jet liquid is considered, keeping other material properties unchanged. To do so, only two liquid types were used: aqueous glycerol solutions for the drop and different types of silicone oil for the jet liquid. Combining these liquids, the viscosity ratio was varied between 0.25 and 3.50. The collision outcomes were classified in the form of regime maps leading to four main regimes: drops in jet, fragmented drops in jet, encapsulated drops, and mixed fragmentation. We demonstrate that, depending on the drop and jet viscosity, not all four regimes can be observed in the domain probed by our experiments. The experiments reveal that the jet viscosity mainly affects the transition between drops in jet and encapsulated drops, which is shifted towards higher drop spacing for more viscous jets. The drop viscosity leaves the previous transition unchanged but modifies the threshold of the drop fragmentation within the continuous jet. We develop a model that quantifies how the drop viscosity affects its extension, which is at first order fixing its shape during recoil and is, therefore, determining its stability against pinch-off.- 28 October 2020
- Published by American Physical Society (APS) in Physical Review Fluids
- Vol. 5 (10) , 103602
Effects of viscosity on liquid structures produced by in-air microfluidics
This paper experimentally investigates the effect of viscosity on the outcomes of collisions between a regular stream of droplets and a continuous liquid jet. A broad variation of liquid viscosity of both the drop and the jet liquid is considered, keeping other material properties unchanged. To do so, only two liquid types were used: aqueous glycerol solutions for the drop and different types of silicone oil for the jet liquid. Combining these liquids, the viscosity ratio was varied between 0.25 and 3.50. The collision outcomes were classified in the form of regime maps leading to four main regimes: drops in jet, fragmented drops in jet, encapsulated drops, and mixed fragmentation. We demonstrate that, depending on the drop and jet viscosity, not all four regimes can be observed in the domain probed by our experiments. The experiments reveal that the jet viscosity mainly affects the transition between drops in jet and encapsulated drops, which is shifted towards higher drop spacing for more viscous jets. The drop viscosity leaves the previous transition unchanged but modifies the threshold of the drop fragmentation within the continuous jet. We develop a model that quantifies how the drop viscosity affects its extension, which is at first order fixing its shape during recoil and is, therefore, determining its stability against pinch-off.- 1 January 2020
- Published by Begell House Inc. Publishers in Atomization and Sprays
- Vol. 30 (11) , 811-823
THE INFLUENCE OF VISCOSITY ON THE OUTCOME OF COLLISIONS BETWEEN LIQUID DROPLETS AND ANOTHER IMMISCIBLE LIQUID JET
We experimentally investigate collisions between a regular stream of droplets and a continuous liquid jet. In this work, the effects of viscosity on the outcome of immiscible drop-jet collisions are studied. To do so, a broad variation of liquid viscosity of both the drop and the jet liquid is considered. Two basic liquid types are used, including three aqueous glycerol solutions for the drop and three types of silicone oil for the jet liquid. In total, five different totally wetting liquid pairs are investigated, where only the viscosity ratio λ=μd/μj is varied between 0.25 and 3.50. The results indicate that, varying the relative impact velocity and the drop spacing, four main collision outcomes occur: drops-in-jet, fragmented drops-in-jet, encapsulated drops and mixed fragmentation. Generally, increasing viscosity stabilizes both the drops and the jet. Special focus is put on the first instants after the impact, during which the drop, totally engulfed by the jet, deforms from a sphere to a bent lamella with a surrounding rim. To observe the drop deformation, the drop liquid is dyed and the jet remains transparent. Two cameras are used providing orthogonal views. We show that the maximum extension of the drop inside the jet depends on the impact velocity and the drop viscosity only. The drop maximum spreading can be well modelled by a scaling law combining the drop Reynolds and Weber numbers. In contrast to the drop extension, the one of the jet depends on both liquid properties. The drop fragmentation, which takes place during the recoil of the liquid structure, after both liquids have reached their maximum extensions, can be attributed to the end-pinching mechanism
- 1 January 2020
- Published by Begell House Inc. Publishers in Atomization and Sprays
- Vol. 30 (11) , 811-823
THE INFLUENCE OF VISCOSITY ON THE OUTCOME OF COLLISIONS BETWEEN LIQUID DROPLETS AND ANOTHER IMMISCIBLE LIQUID JET
We experimentally investigate collisions between a regular stream of droplets and a continuous liquid jet. In this work, the effects of viscosity on the outcome of immiscible drop-jet collisions are studied. To do so, a broad variation of liquid viscosity of both the drop and the jet liquid is considered. Two basic liquid types are used, including three aqueous glycerol solutions for the drop and three types of silicone oil for the jet liquid. In total, five different totally wetting liquid pairs are investigated, where only the viscosity ratio λ=μd/μj is varied between 0.25 and 3.50. The results indicate that, varying the relative impact velocity and the drop spacing, four main collision outcomes occur: drops-in-jet, fragmented drops-in-jet, encapsulated drops and mixed fragmentation. Generally, increasing viscosity stabilizes both the drops and the jet. Special focus is put on the first instants after the impact, during which the drop, totally engulfed by the jet, deforms from a sphere to a bent lamella with a surrounding rim. To observe the drop deformation, the drop liquid is dyed and the jet remains transparent. Two cameras are used providing orthogonal views. We show that the maximum extension of the drop inside the jet depends on the impact velocity and the drop viscosity only. The drop maximum spreading can be well modelled by a scaling law combining the drop Reynolds and Weber numbers. In contrast to the drop extension, the one of the jet depends on both liquid properties. The drop fragmentation, which takes place during the recoil of the liquid structure, after both liquids have reached their maximum extensions, can be attributed to the end-pinching mechanism