Hongtao Dang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hongtao Dang has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Jin Li
College of Mechanical and Electronic Engineering, Northwest A & F University, Yangling 712100, China
3 shared publications - Cheng Wang
College of Missile Engineering, Rocket Force University of Engineering, Xi’an 710025, China
1 shared publication - Dewen Wang
Shaanxi Engineering Research Center of Controllable Neutron Sources, School of Science, Xijing University, Xi’an 710123, People’s Republic of China
1 shared publication Hui Yao
Rocket Force University of Engineering, Xi’an 710025, China
1 shared publication- Jianfeng Wang
Shaanxi Engineering Research Center of Controllable Neutron Sources, School of Science, Xijing University, Xi’an 710123, People’s Republic of China
1 shared publication - Jianxiang Xi
College of Missile Engineering, Rocket Force University of Engineering, Xi’an 710025, China
1 shared publication
Latest Publications
- 13 January 2023
- Published by IOP Publishing in Physica Scripta
- Vol. 98 (2) , 025507
Refractive index sensing performance demonstration of reflective microfiber long taper elaborated by silver and silicon nanoparticles using seawater samples
A refractive index fiber probe has been proposed based on a long-tapered microfiber, which was obtained from a long single-mode microfiber by the oxyhydrogen-flame-scanning and stretching method using a multifunctional fiber tapering machine. This microfiber probe was used to detect the refractive index of seawater samples with different concentrations by demodulating the intensity of reflected light. The refractive index sensing performance of the long-tapered microfibers elaborated by the low refractive index UV glue distributing silver nanoparticles and silicon nanoparticles were experimentally demonstrated, compared and analyzed. More stable spectra and sensing performance was obtained for the silicon nanoparticles compared to that of silver nanoparticles. Although a high average refractive index sensitivity of 13.047 dBm R−1IU−1 was obtained for the long-tapered microfiber coated by two layers of silver nanoparticle UV films. However, the quality of the corresponding spectra was severely damaged, and the amplitude of light intensity at different wavelengths varied greatly. These problems can be well avoided for the silicon nanoparticle-decorated microfiber tapers, where the overall monotonic variation of the interference spectral intensity will greatly simplify the signal demodulation process and improve the reliability of the measurement results.
- 13 January 2023
- Published by IOP Publishing in Physica Scripta
- Vol. 98 (2) , 025507
Refractive index sensing performance demonstration of reflective microfiber long taper elaborated by silver and silicon nanoparticles using seawater samples
A refractive index fiber probe has been proposed based on a long-tapered microfiber, which was obtained from a long single-mode microfiber by the oxyhydrogen-flame-scanning and stretching method using a multifunctional fiber tapering machine. This microfiber probe was used to detect the refractive index of seawater samples with different concentrations by demodulating the intensity of reflected light. The refractive index sensing performance of the long-tapered microfibers elaborated by the low refractive index UV glue distributing silver nanoparticles and silicon nanoparticles were experimentally demonstrated, compared and analyzed. More stable spectra and sensing performance was obtained for the silicon nanoparticles compared to that of silver nanoparticles. Although a high average refractive index sensitivity of 13.047 dBm R−1IU−1 was obtained for the long-tapered microfiber coated by two layers of silver nanoparticle UV films. However, the quality of the corresponding spectra was severely damaged, and the amplitude of light intensity at different wavelengths varied greatly. These problems can be well avoided for the silicon nanoparticle-decorated microfiber tapers, where the overall monotonic variation of the interference spectral intensity will greatly simplify the signal demodulation process and improve the reliability of the measurement results.
- Open Access
Refractive Index and Temperature Sensing Performance of Microfiber Modified by UV Glue Distributed Nanoparticles
Dielectric materials with high refractive index have been widely studied to develop novel photonic devices for modulating optical signals. In this paper, the microfibers were modified by silicon nanoparticles (NPs) and silver NPs mixed in UV glue with ultra-low refractive index, respectively, whose corresponding optical and sensing properties have been studied and compared. The influence from either the morphological parameters of microfiber or the concentration of NPs on the refractive index sensing performance of microfiber has been investigated. The refractive index sensitivities for the microfiber tapers elaborated with silver NPs and silicon NPs were experimentally demonstrated to be 1382.3 nm/RIU and 1769.7 nm/RIU, respectively. Furthermore, the proposed microfiber was encapsulated in one cut of capillary to develop a miniature temperature probe, whose sensitivity was determined as 2.08 nm/°C, ranging from 28 °C to 43 °C.
Open AccessRefractive Index and Temperature Sensing Performance of Microfiber Modified by UV Glue Distributed Nanoparticles
Dielectric materials with high refractive index have been widely studied to develop novel photonic devices for modulating optical signals. In this paper, the microfibers were modified by silicon nanoparticles (NPs) and silver NPs mixed in UV glue with ultra-low refractive index, respectively, whose corresponding optical and sensing properties have been studied and compared. The influence from either the morphological parameters of microfiber or the concentration of NPs on the refractive index sensing performance of microfiber has been investigated. The refractive index sensitivities for the microfiber tapers elaborated with silver NPs and silicon NPs were experimentally demonstrated to be 1382.3 nm/RIU and 1769.7 nm/RIU, respectively. Furthermore, the proposed microfiber was encapsulated in one cut of capillary to develop a miniature temperature probe, whose sensitivity was determined as 2.08 nm/°C, ranging from 28 °C to 43 °C.
- Open Access
- 29 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 13 (1) , 1-8
A Highly-Sensitive Temperature-Sensor Based on a Microfiber Knot-Resonator Packaged in Polydimethylsiloxane
In this paper, a microfiber knot resonator (MKR) was encapsulated in polydimethylsiloxane (PDMS), and its capability to sense temperature was experimentally evaluated. A very high sensitivity of -12 nm/°C was recorded for the MKR device, with a microfiber diameter of 2μm and a ring diameter of 95 μm. However, light-loss was significant in the small MKR. We attribute this to the low ratio of ring-length to microfiber-diameter. A stable temperature-sensing performance and sensitivity of negative 8.48 nm/°C were obtained for the MKRs with a microfiber diameter of 3 μm and a ring diameter of 3 mm. A MKR device with a non-uniform microfiber (in diameter) was also fabricated and studied. This compact and miniature temperature-probe will be a promising candidate for wearable devices.
- 29 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 13 (1) , 1-8
Open AccessA Highly-Sensitive Temperature-Sensor Based on a Microfiber Knot-Resonator Packaged in Polydimethylsiloxane
In this paper, a microfiber knot resonator (MKR) was encapsulated in polydimethylsiloxane (PDMS), and its capability to sense temperature was experimentally evaluated. A very high sensitivity of -12 nm/°C was recorded for the MKR device, with a microfiber diameter of 2μm and a ring diameter of 95 μm. However, light-loss was significant in the small MKR. We attribute this to the low ratio of ring-length to microfiber-diameter. A stable temperature-sensing performance and sensitivity of negative 8.48 nm/°C were obtained for the MKRs with a microfiber diameter of 3 μm and a ring diameter of 3 mm. A MKR device with a non-uniform microfiber (in diameter) was also fabricated and studied. This compact and miniature temperature-probe will be a promising candidate for wearable devices.
- Open Access
- 28 October 2020
- Published by Wiley in Complexity
- Vol. 2020, 1-14
Formation Tracking for High-Order Time-Invariant Swarm Systems with Limited Energy and Fixed Topologies
The current paper investigates design and analysis problems of formation tracking for high-order linear time-invariant swarm systems, where communication topologies among agents have leader-following structures and the whole energy supply is limited. Firstly, the communication topology of a swarm system is depicted by a directed graph with a spanning tree, where the communication channels from the leader to followers are directional and the communication channels among followers are bidirectional, and a new formation tracking protocol with an energy integral term and a given upper bound is proposed to achieve formation tracking with the limited energy. Then, sufficient conditions for time-varying formation tracking design and analysis with the limited energy are presented, respectively, which include two/three linear matrix inequality constraints associated with the maximum and minimum nonzero eigenvalues of the Laplacian matrix of a communication topology. Especially, time-invariant formation tracking criteria are further deduced. Finally, two numerical examples are revealed to verify main theoretical conclusions.
- 28 October 2020
- Published by Wiley in Complexity
- Vol. 2020, 1-14
Open AccessFormation Tracking for High-Order Time-Invariant Swarm Systems with Limited Energy and Fixed Topologies
The current paper investigates design and analysis problems of formation tracking for high-order linear time-invariant swarm systems, where communication topologies among agents have leader-following structures and the whole energy supply is limited. Firstly, the communication topology of a swarm system is depicted by a directed graph with a spanning tree, where the communication channels from the leader to followers are directional and the communication channels among followers are bidirectional, and a new formation tracking protocol with an energy integral term and a given upper bound is proposed to achieve formation tracking with the limited energy. Then, sufficient conditions for time-varying formation tracking design and analysis with the limited energy are presented, respectively, which include two/three linear matrix inequality constraints associated with the maximum and minimum nonzero eigenvalues of the Laplacian matrix of a communication topology. Especially, time-invariant formation tracking criteria are further deduced. Finally, two numerical examples are revealed to verify main theoretical conclusions.
- Open Access
- 9 September 2020
- Published by Wiley in Complexity
- Vol. 2020, 1-13
Synchronization-Based Guaranteed-Performance Formation Design for Swarm Systems
Guaranteed-performance formation control for swarm systems with the second-order dynamics is investigated based on the synchronization control strategy. Firstly, a new formation protocol is presented, where the weights of connected edges are adaptively regulated and the performance constraint is imposed. Then, on the basis of the Riccati inequality, sufficient conditions for synchronization-based guaranteed-performance formation are proposed, and an explicit expression of the guaranteed-performance cost is shown, where it is fully distributed to design gain matrices of the formation protocol in the sense that it is independent of global information of swarm systems. Moreover, the whole motion of a swarm system is determined, which is associated with initial states of all agents and formation control vectors. Finally, two numerical examples are shown to demonstrate theoretical conclusions, where the static whole motion and the dynamic whole motion are considered, respectively.
- 9 September 2020
- Published by Wiley in Complexity
- Vol. 2020, 1-13
Open AccessSynchronization-Based Guaranteed-Performance Formation Design for Swarm Systems
Guaranteed-performance formation control for swarm systems with the second-order dynamics is investigated based on the synchronization control strategy. Firstly, a new formation protocol is presented, where the weights of connected edges are adaptively regulated and the performance constraint is imposed. Then, on the basis of the Riccati inequality, sufficient conditions for synchronization-based guaranteed-performance formation are proposed, and an explicit expression of the guaranteed-performance cost is shown, where it is fully distributed to design gain matrices of the formation protocol in the sense that it is independent of global information of swarm systems. Moreover, the whole motion of a swarm system is determined, which is associated with initial states of all agents and formation control vectors. Finally, two numerical examples are shown to demonstrate theoretical conclusions, where the static whole motion and the dynamic whole motion are considered, respectively.