Seung Un Ryu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Seung Un Ryu has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Taiho Park
Department of Chemical Engineering, Pohang University of Science and Technology (POSTECH), 77 Cheongam-Ro, Nam-gu, Pohang, Gyeongbuk 37673, Republic of Korea
4 shared publications - Dasol Chung
Department of Chemical Engineering, Pohang University of Science and Technology, Pohang, Republic of Korea
1 shared publication - Edward Hartley Sargent
Department of electrical and computer engineering, University of Toronto, Toronto, Ontario, M5S 3G4, Canada
1 shared publication - Francisco Pelayo García de Arquer
The Barcelona Institute of Science and Technology
1 shared publication - Hae Un Kim
Department of Chemical Engineering, Pohang University of Science and Technology, Pohang, Korea
1 shared publication Hong Il Kim
Department of Electrical and Computer Engineering University of Toronto 10 King's College Road Toronto Ontario M5S 3G4 Canada
1 shared publication
Latest Publications
- Open Access
- 12 October 2021
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 12 (42) , 14004-14023
Designs and understanding of small molecule-based non-fullerene acceptors for realizing commercially viable organic photovoltaics
Organic photovoltaics (OPVs) have emerged as a promising next-generation technology with great potential for portable, wearable, and transparent photovoltaic applications. Over the past few decades, remarkable advances have been made in non-fullerene acceptor (NFA)-based OPVs, with their power conversion efficiency exceeding 18%, which is close to the requirements for commercial realization. Novel molecular NFA designs have emerged and evolved in the progress of understanding the physical features of NFA-based OPVs in relation to their high performance, while there is room for further improvement. In this review, the molecular design of representative NFAs is described, and their blend characteristics are assessed via statistical comparisons. Meanwhile, the current understanding of photocurrent generation is reviewed along with the significant physical features observed in high-performance NFA-based OPVs, while the challenging issues and the strategic perspectives for the commercialization of OPV technology are also discussed.
- 12 October 2021
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 12 (42) , 14004-14023
Open AccessDesigns and understanding of small molecule-based non-fullerene acceptors for realizing commercially viable organic photovoltaics
Organic photovoltaics (OPVs) have emerged as a promising next-generation technology with great potential for portable, wearable, and transparent photovoltaic applications. Over the past few decades, remarkable advances have been made in non-fullerene acceptor (NFA)-based OPVs, with their power conversion efficiency exceeding 18%, which is close to the requirements for commercial realization. Novel molecular NFA designs have emerged and evolved in the progress of understanding the physical features of NFA-based OPVs in relation to their high performance, while there is room for further improvement. In this review, the molecular design of representative NFAs is described, and their blend characteristics are assessed via statistical comparisons. Meanwhile, the current understanding of photocurrent generation is reviewed along with the significant physical features observed in high-performance NFA-based OPVs, while the challenging issues and the strategic perspectives for the commercialization of OPV technology are also discussed.
- Open Access
- 28 October 2020
- Published by Wiley in Advanced Materials
- Vol. 32 (48) , e2004985
A Tuned Alternating D–A Copolymer Hole‐Transport Layer Enables Colloidal Quantum Dot Solar Cells with Superior Fill Factor and Efficiency
The need for optoelectronic and chemical compatibility between the layers in colloidal quantum dot (CQD) photovoltaic devices remains a bottleneck in further increasing performance. Conjugated polymers are promising candidates as new hole‐transport layer (HTL) materials in CQD solar cells (CQD‐SCs) owing to the highly tunable optoelectronic properties and compatible chemistries. A diketopyrrolopyrrole‐based polymer with benzothiadiazole derivatives (PD2FCT‐29DPP) as an HTL in these devices is reported. The energy level, molecular orientation, and hole mobility of this HTL are manipulated through molecular engineering. By levering the polymer's optical absorption spectrum complementary to that of the CQD active layer, EQE across the visible and near‐infrared regions is maximized. As a result, a PD2FCT‐29DPP‐based device exhibits a fill factor of 70% and approximately 35% efficiency enhancement compared to a PTB7‐based device.
- 28 October 2020
- Published by Wiley in Advanced Materials
- Vol. 32 (48) , e2004985
Open AccessA Tuned Alternating D–A Copolymer Hole‐Transport Layer Enables Colloidal Quantum Dot Solar Cells with Superior Fill Factor and Efficiency
The need for optoelectronic and chemical compatibility between the layers in colloidal quantum dot (CQD) photovoltaic devices remains a bottleneck in further increasing performance. Conjugated polymers are promising candidates as new hole‐transport layer (HTL) materials in CQD solar cells (CQD‐SCs) owing to the highly tunable optoelectronic properties and compatible chemistries. A diketopyrrolopyrrole‐based polymer with benzothiadiazole derivatives (PD2FCT‐29DPP) as an HTL in these devices is reported. The energy level, molecular orientation, and hole mobility of this HTL are manipulated through molecular engineering. By levering the polymer's optical absorption spectrum complementary to that of the CQD active layer, EQE across the visible and near‐infrared regions is maximized. As a result, a PD2FCT‐29DPP‐based device exhibits a fill factor of 70% and approximately 35% efficiency enhancement compared to a PTB7‐based device.
- 18 September 2020
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 8 (41) , 21455-21473
Green-solvent-processable organic semiconductors and future directions for advanced organic electronics
In recent decades, organic semiconductors (OSCs), which are lightweight, flexible, and have low processing costs, have enabled significant progress in terms of efficiency in the field of organic electronics [e.g., as active materials in organic photovoltaics (OPVs), hole-transporting materials (HTMs) in perovskite solar cells (PSCs), and semiconducting materials in organic thin-film transistors (OTFTs)]. However, most OSCs are currently being processed in halogenated toxic solvents, which creates conditions that are hazardous to the human body and the environment. Accordingly, for large-area fabrication and commercialization, OSCs must be developed to show high solubility in environmentally friendly and non-harmful solvents as well as high performance. This review considers environmentally benign solvents and potential approaches for increasing the solubility of OSCs in relation to Hansen solubility parameters (HSPs) and molecular design. It also provides guidelines regarding molecular design for advanced OSCs possessing additional functions, sustaining green-solvent processability, and superior efficiency. We believe that these efforts toward an environmentally benign process will contribute to the development and commercialization of organic electronics and shed light on future directions for OSC research in relation to industry, the environment, and human life.
- 18 September 2020
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 8 (41) , 21455-21473
Green-solvent-processable organic semiconductors and future directions for advanced organic electronics
In recent decades, organic semiconductors (OSCs), which are lightweight, flexible, and have low processing costs, have enabled significant progress in terms of efficiency in the field of organic electronics [e.g., as active materials in organic photovoltaics (OPVs), hole-transporting materials (HTMs) in perovskite solar cells (PSCs), and semiconducting materials in organic thin-film transistors (OTFTs)]. However, most OSCs are currently being processed in halogenated toxic solvents, which creates conditions that are hazardous to the human body and the environment. Accordingly, for large-area fabrication and commercialization, OSCs must be developed to show high solubility in environmentally friendly and non-harmful solvents as well as high performance. This review considers environmentally benign solvents and potential approaches for increasing the solubility of OSCs in relation to Hansen solubility parameters (HSPs) and molecular design. It also provides guidelines regarding molecular design for advanced OSCs possessing additional functions, sustaining green-solvent processability, and superior efficiency. We believe that these efforts toward an environmentally benign process will contribute to the development and commercialization of organic electronics and shed light on future directions for OSC research in relation to industry, the environment, and human life.
- 17 September 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 6 (39) , 10640-10658
Substituents engineered deep-red to near-infrared phosphorescence from tris-heteroleptic iridium(iii) complexes for solution processable red-NIR organic light-emitting diodes
Research on near-infrared- (NIR-) emitting materials and devices has been propelled by fundamental and practical application demands surrounding information-secured devices and night-vision displays to phototherapy and civilian medical diagnostics. However, the development of stable, highly efficient, low-cost NIR-emitting luminophores is still a formidable challenge owing to the vulnerability of the small emissive bandgap toward several nonradiative decay pathways, including the overlapping of ground- and excited-state vibrational energies and high-frequency oscillators. Suitable structural designs are mandatory for producing an intense NIR emission. Herein, we developed a series of deep-red to NIR emissive iridium(III) complexes (Ir1–Ir4) to explore the effects of electron-donating and electron-withdrawing substituents anchored on the quinoline moiety of (benzo[b]thiophen-2-yl)quinoline cyclometalating ligands. These substituents help engineer the emission bandgap systematically from the deep-red to the NIR region while altering the emission efficiencies drastically. Single-crystal X-ray structures authenticated the exact coordination geometry and intermolecular interactions in these new compounds. We also performed an in-depth and comparative photophysical study in the solution, neat powder, doped polymer film, and freeze matrix at 77 K states to investigate the effects of substitution on the excited-state properties. These studies were conducted in conjunction with density functional theory (DFT) and time-dependent density functional theory (TD-DFT) calculations. Most importantly, the –CH3 substituted Ir1, unsubstituted Ir2, and –CF3 substituted complex (Ir4) were promising novel compounds with bright phosphorescence quantum efficiency in doped polymer films. Using these novel molecules, deep-red to NIR emissive organic light-emitting diodes (OLEDs) were fabricated using a solution-processable method. The unoptimized device exhibited maximum external quantum efficiency (EQE) values of 2.05% and 2.11% for Ir1 and Ir2, respectively.
- 17 September 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 6 (39) , 10640-10658
Substituents engineered deep-red to near-infrared phosphorescence from tris-heteroleptic iridium(iii) complexes for solution processable red-NIR organic light-emitting diodes
Research on near-infrared- (NIR-) emitting materials and devices has been propelled by fundamental and practical application demands surrounding information-secured devices and night-vision displays to phototherapy and civilian medical diagnostics. However, the development of stable, highly efficient, low-cost NIR-emitting luminophores is still a formidable challenge owing to the vulnerability of the small emissive bandgap toward several nonradiative decay pathways, including the overlapping of ground- and excited-state vibrational energies and high-frequency oscillators. Suitable structural designs are mandatory for producing an intense NIR emission. Herein, we developed a series of deep-red to NIR emissive iridium(III) complexes (Ir1–Ir4) to explore the effects of electron-donating and electron-withdrawing substituents anchored on the quinoline moiety of (benzo[b]thiophen-2-yl)quinoline cyclometalating ligands. These substituents help engineer the emission bandgap systematically from the deep-red to the NIR region while altering the emission efficiencies drastically. Single-crystal X-ray structures authenticated the exact coordination geometry and intermolecular interactions in these new compounds. We also performed an in-depth and comparative photophysical study in the solution, neat powder, doped polymer film, and freeze matrix at 77 K states to investigate the effects of substitution on the excited-state properties. These studies were conducted in conjunction with density functional theory (DFT) and time-dependent density functional theory (TD-DFT) calculations. Most importantly, the –CH3 substituted Ir1, unsubstituted Ir2, and –CF3 substituted complex (Ir4) were promising novel compounds with bright phosphorescence quantum efficiency in doped polymer films. Using these novel molecules, deep-red to NIR emissive organic light-emitting diodes (OLEDs) were fabricated using a solution-processable method. The unoptimized device exhibited maximum external quantum efficiency (EQE) values of 2.05% and 2.11% for Ir1 and Ir2, respectively.