Hongwei Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hongwei Chen has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Qunsheng Cao
Nanjing University of Aeronautics and Astronautics
2 shared publications Chaobo Ma
Senior Engineer, Xingtai Road and Bridge Construction Corporation, No. 79 Gao Zhuang Qiao Road, Hebei, China
1 shared publication- Haohui Xin
Xi’an Jiaotong University
1 shared publication Jinwei Liang
College of Electronic and Information Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, Jiangsu, China
1 shared publication- Jun He
School of Civil and Environmental Engineering, Changsha University of Science and Technology, Changsha 410114, China
1 shared publication Sihao Wang
Ph.D. Candidate., Dept. of Bridge Engineering, Tongji Univ., Shanghai, China
1 shared publication
Latest Publications
- 13 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Dual-Band RCS Reduction of a Fabry-Perot Antenna Based on Polarization Conversion Metasurface
A Fabry-Perot antenna which can reduce dual-band rdar cross section (RCS) and improve gain is proposed. This is achieved by introduction the polarization conversion metasurface (PCM) and the theory of phase cancellation. The simulation results show that the maximum out-of-band RCS reduction for the structure achieves 15dB at 4–9 GHz and 12-15GHz. Besides, the gain of Fabry-Perot antenna enhances 7dB higher than that of the original microstrip antenna.
- 13 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Dual-Band RCS Reduction of a Fabry-Perot Antenna Based on Polarization Conversion Metasurface
A Fabry-Perot antenna which can reduce dual-band rdar cross section (RCS) and improve gain is proposed. This is achieved by introduction the polarization conversion metasurface (PCM) and the theory of phase cancellation. The simulation results show that the maximum out-of-band RCS reduction for the structure achieves 15dB at 4–9 GHz and 12-15GHz. Besides, the gain of Fabry-Perot antenna enhances 7dB higher than that of the original microstrip antenna.
- 30 October 2020
- Published by Wiley in International Journal of RF and Microwave Computer-Aided Engineering
- Vol. 31 (1)
A wideband switchable absorber/reflector based on active frequency selective surface
- 30 October 2020
- Published by Wiley in International Journal of RF and Microwave Computer-Aided Engineering
- Vol. 31 (1)
A wideband switchable absorber/reflector based on active frequency selective surface
- 1 June 2019
- Published by American Society of Civil Engineers (ASCE) in Journal of Bridge Engineering
- Vol. 24 (6)
Experimental Study on Structural Performance of Prefabricated Composite Box Girder with Corrugated Webs and Steel Tube Slab
We present an innovative prefabricated composite box girder with corrugated webs and concrete-filled steel tube slab to prevent cracking in the web and reduce the self-weight, which is suitable for long-span structures. We carried out systematic experimental and analytical studies to investigate the structural performance, including the loading capacity and dynamic properties of a prefabricated composite box girder bridge before and after erection. Firstly, we tested a prefabricated composite girder with a single box section before erection under monotonic loading, measuring vertical deformation, flexural strain on the slabs, and shear strain on the corrugated steel webs, and evaluating the load-carrying capacity and stiffness reduction. Secondly, we conducted field live-load tests, including a calibration test and a dynamic test, on a composite bridge with twin prefabricated box girders. We hired four-axle heavy trucks for a calibration test to explore the static responses in terms of displacement, bending strain on the slabs, and shear strain on the corrugated steel webs. In the dynamic tests, we carried out a modal test using ambient vibration method and a moving load test in order to determine the dynamic behavior, which involves natural frequencies, the mode shapes, and the dynamic load factor (DLF). Based on the test results, the structural performance was evaluated by the AASHTO bridge rating process. All the findings from the load-carrying capacity test at ultimate state, calibration and dynamic load tests at service state in this study may provide a reference for the design and construction of such type of bridges.
- 1 June 2019
- Published by American Society of Civil Engineers (ASCE) in Journal of Bridge Engineering
- Vol. 24 (6)
Experimental Study on Structural Performance of Prefabricated Composite Box Girder with Corrugated Webs and Steel Tube Slab
We present an innovative prefabricated composite box girder with corrugated webs and concrete-filled steel tube slab to prevent cracking in the web and reduce the self-weight, which is suitable for long-span structures. We carried out systematic experimental and analytical studies to investigate the structural performance, including the loading capacity and dynamic properties of a prefabricated composite box girder bridge before and after erection. Firstly, we tested a prefabricated composite girder with a single box section before erection under monotonic loading, measuring vertical deformation, flexural strain on the slabs, and shear strain on the corrugated steel webs, and evaluating the load-carrying capacity and stiffness reduction. Secondly, we conducted field live-load tests, including a calibration test and a dynamic test, on a composite bridge with twin prefabricated box girders. We hired four-axle heavy trucks for a calibration test to explore the static responses in terms of displacement, bending strain on the slabs, and shear strain on the corrugated steel webs. In the dynamic tests, we carried out a modal test using ambient vibration method and a moving load test in order to determine the dynamic behavior, which involves natural frequencies, the mode shapes, and the dynamic load factor (DLF). Based on the test results, the structural performance was evaluated by the AASHTO bridge rating process. All the findings from the load-carrying capacity test at ultimate state, calibration and dynamic load tests at service state in this study may provide a reference for the design and construction of such type of bridges.