AVArnaldo Verdeza

Arnaldo Verdeza

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Arnaldo Verdeza has a total of 33 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Sectoral Forecasting of Natural Gas Consumption in Colombia: A Structural and Seasonal Analysis Using Holt–Winters Models

    by Alexander D. Pulido-Rojano, Neyfe Sablón-Cossío, Arnaldo Verdeza-Villalobos, Juan Molina-Tapia, Ricardo Marin-Algarin, Aaron Jiménez-Rodríguez, Jesús Tejera-Gutiérrez

    This study examines the sectoral dynamics of natural gas consumption in Colombia by applying additive and multiplicative Holt–Winters exponential smoothing models. The analysis covers the main demand segments (Thermal Generation, Industrial, Residential, Refinery, Compressed Natural Gas for Vehicles (GNVC), Commercial, Petrochemical, and SNT Compressor Stations) using official monthly data from the Colombian Mercantile Exchange for the period April 2020 to July 2025. Model configurations were optimized by minimizing the Mean Absolute Error (MAE), Mean Absolute Percentage Error (MAPE), and Mean Squared Error (MSE) to identify the most appropriate structure for each sector. The results confirm that natural gas consumption in Colombia does not follow a uniform seasonal pattern. Instead, each segment exhibits distinct dynamics shaped by operational conditions, production schedules, mobility-related behavior, or logistical planning. The Thermal Generation sector was best represented by the multiplicative model, reflecting proportional variability associated with electricity dispatch and system-level operational changes. In contrast, the Industrial, Residential, GNVC, Commercial, and SNT Compressor Stations sectors showed superior performance under the additive model, consistent with relatively stable or constant-magnitude seasonal effects. The Petrochemical and Refinery sectors displayed short-term cyclical behavior, with model accuracy depending on the performance metric prioritized. These findings demonstrate that energy forecasting must incorporate the structural heterogeneity of demand systems rather than treating natural gas consumption as a homogeneous aggregate. Practically, the results provide insights for improving supply planning, contract allocation, and regulatory segmentation. The study also offers a replicable methodological basis for forecasting in emerging economies characterized by diverse consumption profiles.

  • Open Access

    Modelamiento dinámico de un sistema de gasificación de lecho fijo estratificado

    by Yuhan Arley Lenis, José Reinaldo Garzón, Iván Portnoy, Arnaldo Verdeza, Celso Eduardo Lins de Oliveira

    La gasificación de biomasa es un proceso termoquímico que viene ganando interés a nivel mundial debido a que permite transformar un material carbonáceo en un gas combustible de bajo contenido energético, pero de fácil aprovechamiento en motores de combustión interna. Los equipos de gasificación en lecho fijo para baja potencia usualmente no cuentan con sistemas de control de la posición del frente de llama, lo que conduce a inestabilidades del proceso y variaciones en la calidad del gas producido. Buscando facilitar el proceso de desarrollo de estrategias de control, se presenta un modelo dinámico que permite predecir de forma adecuada la respuesta de la velocidad del frente de llama ante perturbaciones en el flujo de agente gasificante, la densidad y humedad de la biomasa. Para ello, se hace uso de funciones transferencia de primer orden cuyas constantes se derivan a partir de estudios experimentales reportados en la literatura. Dicho desarrollo constituye una importante herramienta tanto para el diagnóstico del proceso como para el diseño de estrategias de control orientadas a gasificadores de lecho fijo.


  • Open Access

    Control scheme selection and optimal tuning in industrial process control using factorial experiment design

    by David Roberto Acosta Villamil, José Fernando Noguera Polania, Arnaldo Verdeza Villalobos, Blanca Luz Foliaco Romero, Adriana Fernanda Rincón Montenegro, Marco Enrique Sanjuan Mejia

    In this study, a novel experimental approach for the optimal selection of an actuator-based control strategy is presented. The proposed approach is a two-stage method: first, a two-level factorial experiment design with n factors (2n) was applied to compare different control schemes. Schemes comparison was carried out in terms of energy consumption and closed-loop performance. For the best relative scheme, a Central Composite Face-centered (CCF) design was completed obtaining the controller parameters that optimize the performance in terms of the Integral Absolute Error (IAE) while operating in a region of low energy consumption. The proposed approach was experimentally tested using real data obtained from a laboratory prototype plant. Some experimental tests illustrating the suitability of our method are shown at the end of this article.

  • Open Access

    Performance analysis of a commercial fixed bed downdraft gasifier using palm kernel shells

    by Arnaldo Verdeza-Villalobos, Yuhan Arley Lenis-Rodas, Antonio José Bula-Silvera, Jorge Mario Mendoza-Fandiño, Rafael David Gómez-Vásquez

    This work analyzes the use of palm kernel shells (PKS) produced by the Colombian palm oil mill industry, for purposes of fueling a commercial downdraft fixed bed gasifier (Ankur Scientific WGB- 20) designed to operate with wood chips. Operational parameters such as hopper shaking time, ash removal time, and airflow were varied in order to get the highest gasifier performance, computed as the ratio between producer gas chemical energy over biomass feeding energy. Experiments were carried out following a half fraction experimental design 24-1. Since these parameters affect the equivalence ratio (ER), behavior indicators were analyzed as a function of ER. It was found that the shaking time and airflow had a significant effect on higher-heating-value (HHV) and process efficiency, while the removal time is not significant. The highest performance for palm shell was reached at ER=0.35, where the resulting gas HHV and process efficiencies were 5.04 MJ/Nm3 and 58%, respectively.


  • Open Access

    Ecuaciones de Sintonía para Controladores PID usando la Minimización del Error y de la Varianza de la Señal del Controlador como la Función Objetivo

    by Ivan D. Portnoy, Arnaldo Verdeza, Yuhan A. Lenis, Marco E. Sanjuán

    A partir de un modelo paramétrico para procesos de primer orden más tiempo muerto, se desarrollan ecuaciones de sintonía para controladores PID. Se usa como criterio de optimización la minimización de una función objetivo, compuesta por una combinación de la integral del valor absoluto del error (IAE) y la varianza de la señal del controlador. Se obtienen dos conjuntos de ecuaciones de sintonía, uno para 0.10/τ0/τ<5.0. Ambos conjuntos de ecuaciones de sintonía se evalúan con procesos de referencia, y sus resultados se comparan con las sintonías de mínimo IAE, integral cuadrada del error (ISE), integral cuadrada del error por el tiempo (ISTE), por control de modelo interno (IMC) y Lambda (λ). A diferencia de las ecuaciones tradicionales, las propuestas en este trabajo consideran la respuesta de la variable controlada y la variabilidad en la señal que se envía a los actuadores.


  • Open Access

    Optimización de las Condiciones de Operación de la Micro-gasificación de Biomasa para Producción de Gas de Síntesis

    by Luz M Ahumada, Arnaldo Verdeza, Antonio J Bula, Jahir Lombana

    Se presentan los resultados de un estudio sobre la significancia y la optimización de algunas variables (granulometría, velocidad de aire, contenido de biomasa y disposición del reactor) en el poder calorífico del gas de síntesis obtenido de la gasificación de biomasa (carbón vegetal y cuesco de palma africana). Mediante un diseño de experimento se evaluaron las cuatro variables que oscilaban entre 8-13mm para la granulometría, 0.8-1.4m/s para la velocidad del aire, 0-100 para el contenido de biomasa y ascendentedescendente para la disposición del reactor. Se encontró que los factores correspondientes a la granulometría y el contenido de biomasa resultan ser los más significativos en el poder calorífico del gas. Un poder calorífico máximo de 3.84MJ/Nm 3 se obtuvo con la disposición descendente del reactor, alimentación de carbón vegetal con granulometría de 13mm y suministro máximo de flujo de aire. La verificación del punto óptimo de operación mostró que tales condiciones de operación favorecían la producción de un gas con un alto poder calorífico.


  • Chemical Equilibrium Model for Fixed-Bed Gasification to Assess Biomass Energy Content

    by Arnaldo Verdeza, Luz Ahumada, Antonio Bula

    A chemical equilibrium model for fixed-bed gasification is developed, which allows the prediction of the syngas composition, the amount of residual coal or ash, as well as the amount of tars as a function of the gasification temperature and the elemental composition of the biomass and the tars. Moreover, the combustion heat of the gas fuel is calculated, as well as the conversion and process efficiency, in order to perform further analyses which allow the determination of energy potential for different types of biomass under several conditions of moisture and equivalence ratio of gasifying agent. Performance of the proposed model is compared to prediction of some models which were found to be relevant in the literature review. An assessment to the model is also carried out. For this purpose, a case-study is performed for African palm (Elaeis guineensis) shells using a commercial gasifier. Experimental data obtained from the biomass used in the case-study are used to feed the model and perform the assessment. Actual results and model predictions (results) are compared varying the equivalent relation between 0.05 and 0.65, and the moisture content form biomass between 0 and 20%. This case is proposed as a benchmark case for further applications.

  • Optimization of a Biomass Micro-Gasification Process for the Production of Synthesis Gas From Palm Shell

    by Luz M. Ahumada, Arnaldo Verdeza, Antonio J. Bula

    This paper studied, through an experiment design, the significance of particle size, air speed and reactor arrangement for palm shell micro-gasification process in order to optimize the heating value of the syngas obtained. The range of variables was 8 to 13 mm for particle size, 0.8–1.4m/s for air velocity, and updraft or downdraft for the reactor type. It was found that the particle size and air velocity factors were the most significant in the optimization of the output variable, syngas heating value. A heating value of 2.69MJ / Nm3 was obtained using a fixed bed downdraft reactor, with a particle size of 13 mm and 1.4 m/s for air speed; verification of the optimum point of operation under these conditions verified that these operating conditions favor the production of a gas with a high energy value.

  • Biobriquettes: As a Sustainable Composite Fuel for Rural Areas in Developing Countries

    by Adrian Ávila, Víctor Nova, Rafael Gomez, Arnaldo Verdeza, Jorge M. Mendoza

    The province of Cordoba, Colombia, has a 250.000 tons production of corn, which generate about 45.000 tons of cobs per year, which do not represent any value for farmers. The disposal of this agricultural waste has become a source of contamination because is burned in open areas. On the other hand, this province has a considerable production of raw coal; nevertheless, it is characterized by its high sulfur content (1.65%) and low heat value (5111 cal/gr), as a consequence, it has a limited market, but is still used as a fuel. This study proposes the use of biobriquettes that are a composite fuel prepared from a mixture of biomass (corn cob) and coal in a low die press briquetting machine. They consist of different proportions of milled cob (up to 80%) and coal (up to 40%) mixed with a cassava starch based binder. For the mixtures proximal analysis, including sulfur content and heat values of the material was determined according to their composition. The experimental results showed that the biobriquettes compared with the raw coal have between a 92 to 32% lower sulfur content, while the heat value was reduced by 14 to 29%. Therefore, its use will reduce the amount of burned residue in open spaces and consequently the pollution.