TGTetyana M. Gorda

Tetyana M. Gorda

*This is an algorithmically generated author record based on publicly available information.

Tetyana M. Gorda has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    MODEL OF PERSONALITY-ORIENTED INFORMATION TECHNOLOGY OF TEACHING PHYSICAL, MATHEMATICAL AND GENERAL TECHNICAL DISCIPLINES

    by Poltava State Agrarian University, Anatoliі Antonets, Irina Kanivets, Tetyana Gorda, Poltava Polytechnic Professional College, Анатолій Антонець, Ірина Канівець

    The solution to the problem of training future engineers in the ability to find effective ways to solve problems, critically analyze the knowledge gained and apply it to solve complex technical tasks is based on the use of modern achievements of pedagogical science. A special role in this is played by a personality-oriented approach when studying physical, mathematical and general technical disciplines with using information technologies. The purpose of the article is to develop and substantiate a model of the process of organizing the educational activities of future engineers during the study of physical, mathematical and general technical disciplines using personality-oriented information technology for learning. Methods. Pedagogical observation, conversations, interviews, questionnaires. Results. The conceptual features and main components of the model of personality-oriented information technology for teaching physics, mathematics and general technical disciplines are presented. The main principles and criteria for selecting the content of physical, mathematical and general technical disciplines for the proposed model are presented. Originality. An explanation of the purpose of each component of the model is provided and the factors that influence them are outlined. The algorithm for implementing this model is described. Conclusion. The use of the proposed model of personality-oriented information technology for teaching physics, mathematics and general engineering disciplines will contribute to the effective achievement of the corresponding programmed learning outcomes and will provide the opportunity for future engineers to choose the optimal educational trajectory.


  • LOGICAL AND SEMANTIC MODEL OF INDEPENDENT WORK OF HIGHER EDUCATION STUDENTS IN THE PROCESS OF STUDYING PHYSICAL AND MATHEMATICAL DISCIPLINES

    by Poltava State Agrarian University, Iryna Kanivets, Tatiana Horda, VSP ‘Poltava Polytechnic Specialist College of the National Technical University «Kharkiv Polytechnic Institute», Anatolii Antonets

    У статті проаналізовано педагогічні суперечності освітнього процесу закладів вищої освіти, зокрема аграрного профілю. Розкрито питання моделювання структури та змісту самостійної роботи здобувачів вищої освіти впроцесі вивчення фізико-математичних дисциплін, зокрема вищої математики та фізики. Висвітлено етапи побудови логіко-семантичної моделі структури та змісту самостійної роботи здобувачів освіти вищих аграрних навчальних закладів під часвикладаннявищої математики і фізики. Розкрито основні дидактичні цілі самостійної роботи здобувачів вищої освіти в процесі вивчення фізико-математичних дисциплін. Запропоновано рекомендації щодо планування послідовності самостійного вивчення змістових блоків навчальних дисциплін «Вища математика»і «Фізика».


  • Open Access

    VR simulator for studying the structure of tractors

    by Irina M. Kanivets, Oleksandr V. Kanivets, Tetyana M. Gorda

    The intensive development of agricultural engineering and agricultural technologies requires a future engineer to have thorough knowledge of the structure and purpose of modern agricultural machinery. In the educational process of training future engineers at higher agricultural educational institutions, the problem has arisen, which is the lack of such equipment as training models. Smart technologies of Industry 4.0, such as artificial intelligence, digital twins, virtual and augmented reality, allow to optimize the educational process, increase its efficiency and reduce the time spent on learning due to a new stage of automation. The purpose of the article is to highlight the main stages of VR application development and the possibilities of using virtual reality to study the structure of tractors. The main object of study is a tractor, so the issue of developing a digital twin has been resolved separately. The VR application has been developed as a smartphone program using a Google Cardboard headset, and the Unity game engine has been chosen as the development environment. The main scene shows a hangar with electronic models of a John Deere 6195M tractor and a virtual avatar. One model of the tractor is disassembled into separate components to study its internal structure. A script was written for the virtual avatar to allow it to move. In particular, the avatar moves when the camera is tilted down to a certain angle. Red markers are placed near the tractor units, which interact with the avatar’s sight and display information panels. The information panels tell about the name of the unit, its purpose, and technical characteristics. The capabilities of the developed program have been tested on a sample of students, which included 53 applicants of the speciality 208 Agroengineering. During teaching the Technologies and means of the agroindustrial complex discipline, a practical lesson was developed where students studied the structure of the John Deere 6195M tractor and the controls located in the cab. Evaluation and measurement of user perception of the developed virtual reality application has been determined by a survey based on a questionnaire on technology acceptance. The data obtained using the Likert scale have been analyzed by calculating the mean, median, and standard deviation. The median is close to the mean. This fact indicates a normal distribution of responses, meaning that most respondents rated the mobile application about the same. The results of calculating the standard deviation have shown that these indicators do not exceed one. This indicates the homogeneity of the respondents’ answers, which are close to the average value. The use of the program we developed in the educational process has shown that higher education students liked the process of gaining knowledge in the game form, but it should be noted that the movement of the virtual avatar sometimes caused dizziness in some users.


  • Using a mobile application to teach students to measure with a micrometer during remote laboratory work

    by Oleksandr V. Kanivets, Irina M. Kanivets, Tetyana M. Gorda, Oleksandr V. Gorbenko, Anton O. Kelemesh

    In modern conditions, the transition to distance learning has set new tasks for teachers, in particular, related to laboratory work. In these works, students not only study the structure and features of special equipment, but also acquire practical skills in working with the tool. The purpose of the article is to present our own experience of developing and using in the educational process a mobile application for teaching micrometer measurements during the relevant remote laboratory work in the disciplines “Interchangeability, Standardization and Technical Measurements” and “Physics”. The literature analysis showed that ICT is widely used in the educational process in higher education, but computer programs and mobile applications are usually developed for secondary school disciplines, so there was a need to develop an information program for teaching students in distance learning, in particular during laboratory work. In order to teach students to work with a micrometer during distance learning, we have developed a mobile application. The process of developing the application included modeling the micrometer in the CAD system, creating training scenes in the Unity game engine and writing scripts to fully immerse students in the learning process. The mobile application developed by us consists of three parts: theoretical, educational and practical. In the theoretical part, students learn the structure and principles of working with a micrometer. The training part is developed in the form of a video lesson of working with the equipment. The practical part contains an electronic model of the micrometer and allows you to make measurements. Thus, during distance learning using the developed application, the percentage of qualitative success of students in laboratory work on the topic “Measuring parts with a micrometer” increased by 7.3% compared to the same period of distance learning without the use of this application.

  • Open Access

    Using a mobile application to teach students to measure with a micrometer during remote laboratory work

    by Oleksandr V. Kanivets, Irina M. Kanivets, Tetyana M. Gorda, Oleksandr V. Gorbenko, Anton O. Kelemesh

    In modern conditions, the transition to distance learning has set new tasks for teachers, in particular, related to laboratory work. In these works, students not only study the structure and features of special equipment, but also acquire practical skills in working with the tool. The purpose of the article is to present our own experience of developing and using in the educational process a mobile application for teaching micrometer measurements during the relevant remote laboratory work in the disciplines ``Interchangeability, Standardization and Technical Measurements'' and ``Physics''. The literature analysis showed that ICT is widely used in the educational process in higher education, but computer programs and mobile applications are usually developed for secondary school disciplines, so there was a need to develop an information program for teaching students in distance learning, in particular during laboratory work. In order to teach students to work with a micrometer during distance learning, we have developed a mobile application. The process of developing the application included modeling the micrometer in the CAD system, creating training scenes in the Unity game engine and writing scripts to fully immerse students in the learning process. The mobile application developed by us consists of three parts: theoretical, educational and practical. In the theoretical part, students learn the structure and principles of working with a micrometer. The training part is developed in the form of a video lesson of working with the equipment. The practical part contains an electronic model of the micrometer and allows you to make measurements. Thus, during distance learning using the developed application, the percentage of qualitative success of students in laboratory work on the topic ``Measuring parts with a micrometer'' increased by 7.3\% compared to the same period of distance learning without the use of this application.


  • Open Access

    Development of an augmented reality mobile physics application to study electric circuits

    by Oleksandr V. Kanivets, Irina M. Kanivets, Tetyana M. Gorda

    The use of virtual teaching aids with AR technology in various areas of education, including physics, has been studied. The similarity between physical and electrical models has been established, and the development of a mobile app for studying simple electric circuits has been validated. The feasibility of developing the technique of augmented reality mobile apps has been established. The following milestones have been identified in the development of the augmented reality app: production of electronic models, installation of the game engine Unity3D, development of all program scenes, operation testing, and demonstration. The application of scenarios for electronic models rotation and movement has received special attention. In-house created augmented reality mobile app for mobile devices "Augmented reality program for studying the simplest electric circuit" has been offered. The developed mobile app reads, recognizes, and displays the product electronic model on the screen. It has been demonstrated that the augmented reality application produced by the author team as mobile teaching software can be used to complete assignments for students' individual work as well as classroom studies at colleges.


  • Development of a machine vision program to determine the completeness of wrapping plants in the soil

    by Oleksandr V. Kanivets, Irina M. Kanivets, Tetyana M. Gorda, Oleksii A. Burlaka

    The article analyzes the process of natural restoration of the main component of the soil – humus, as a result of which the dependence of the thickness of the humus layer on the number of plants embedded in the soil was revealed. The technological process of surface tillage requires constant monitoring of the completeness of plant burying. The article analyzes the literature, which showed that machine vision systems are widely used in agriculture, for example, when detecting weeds for spot treatment with herbicides, analyzing citrus forms and diseases, automated counting of roundworms of cut trees, etc. A machine vision system is proposed as a control tool for detecting weeds on the soil surface. The authors proposed their own approach to control the completeness of burying pruned weeds in the soil using machine vision systems. The work of our own program for detecting weeds on the soil surface is described in detail and step by step. The program’s operability was checked on some plant models and its effectiveness of reliable operation was confirmed. Experimental studies were conducted in the laboratory. Based on the results of research in the computer program developed by the authors, the following results were obtained: photos of the soil surface were analyzed; contours of plant models were identified; plant areas and their percentage in relation to the image area were determined, and a message was received on the screen about the presence of weeds on the surface in accordance with agrotechnical standards.


  • Open Access

    РОЗРОБЛЕННЯ МОБІЛЬНИХ ДОДАТКІВ ДОПОВНЕНОЇ РЕАЛЬНОСТІ ДЛЯ ВИВЧЕННЯ ТРИВИМІРНИХ МОДЕЛЕЙ ІЗ ІНЖЕНЕРНОЇ ГРАФІКИ

    by Олександр Васильович Канівець, Ірина Михайлівна Канівець, Наталія Василівна Кононец, Тетяна Михайлівна Горда

    Автори актуалізують проблему реалізації мобільного навчання студентів у межах упровадження концепції ресурсно-орієнтованого навчання у вищій школі. На основі аналізу досліджень зроблено висновок про те, що мобільне навчання тлумачиться як форма ресурсно орієнтованого навчання і розглядається як система організаційних і дидактичних заходів, які базуються на використанні мобільних інформаційно-комунікаційних технологій та мобільних педагогічних програмних засобів. Зазначається, що одним із напрямів реалізації концепції ресурсно орієнтованого навчання у вищій школі є розробка таких мобільних педагогічних програмних засобів, які уможливлять підвищити якість професійної підготовки фахівців, зокрема, технічних спеціальностей. Проведений аналіз засобів навчання, що використовуються під час вивчення загальнотехнічних дисциплін, дав можливість провести аналогію між фізичними і електронними моделями та обґрунтувати розробку програмного забезпечення для розвитку просторового мислення студентів технічних спеціальностей. Подано методику створення мобільних додатків для доповненої реальності, висвітлено основні етапи розробки додатку доповненої реальності, починаючи від встановлення ігрового рушія до його тестування та демонстрації роботи. Особливу увагу приділено написанню та обґрунтуванню кожного рядка сценаріїв (scripts). Презентовано власну розробку мобільного додатку для мобільних пристроїв «Програма доповненої реальності», яка реалізує доповнену реальність. Створений мобільний додаток зчитує, розпізнає маркер кресленика та відображає на екрані мобільного пристрою електронну модель виробу. З’ясовано, що розроблена авторським колективом програма доповненої реальності як мобільний педагогічний програмний засіб може бути використана для підтримки як самостійної роботи студентів, так і при організації аудиторних занять у закладах вищої освіти.


  • Development of mobile applications of augmented reality for projects with projection drawings

    by Oleksandr V. Kanivets, Irina М. Kanivets, Natalia V. Kononets, Tetyana М. Gorda, Ekaterina O. Shmeltser

    We conducted an analysis of the learning aids used in the study of general technical disciplines. This allowed us to draw an analogy between physical and virtual models and justify the development of a mobile application to perform tasks on a projection drawing. They showed a technique for creating mobile applications for augmented reality. The main stages of the development of an augmented reality application are shown: the development of virtual models, the establishment of the Unity3D game engine, the development of a mobile application, testing and demonstration of work. Particular attention is paid to the use of scripts to rotate and move virtual models. The in-house development of the augmented reality mobile application for accomplishing tasks on a projection drawing is presented. The created mobile application reads, recognizes marker drawings and displays the virtual model of the product on the screen of the mobile device. It has been established that the augmented reality program developed by the team of authors as a mobile pedagogical software can be used to perform tasks both with independent work of students and with the organization of classroom activities in higher education institutions.