Jiabao Ding
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jiabao Ding has a total of 77 co-authors. Here are the top co-authors by number of shared publications:
- Xiaoqing Huang
State Key Laboratory of Physical Chemistry of Solid Surfaces, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen, 361005, China
7 shared publications Lingzheng Bu
College of Chemistry, Chemical Engineering, and Materials Science, Soochow University , Jiangsu 215123, China
4 shared publicationsWeifeng Zhang
Henan Key Laboratory of Quantum Materials and Quantum Energy, School of Future Technology, Henan University, Zhengzhou 450046, China
4 shared publicationsJianlin Yao
College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Jiangsu, 215123, China
3 shared publicationsQi Shao
College of Chemistry Chemical Engineering and Materials Science Soochow University Jiangsu 215123 P.R. China
3 shared publications- Yang Han
Qingdao Innovation and Development Center of Harbin Engineering University, 266400 Qingdao, China
3 shared publications
Latest Publications
- 1 September 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (52) , 36053-36061
Calcium deficiencies and oxygen vacancies co-modulate the oxygen evolution activity of Ca 4 IrO 6− δ via the lattice oxygen mechanism
Ca 4− x IrO 6− δ particles with Ca deficiencies act as electrocatalysts toward oxygen evolution in acid electrolytes via the lattice oxygen mechanism. The Ca deficiencies and oxygen vacancies co-modulate the OER performance of Ca 4− x IrO 6− δ .
- 1 September 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (52) , 36053-36061
Calcium deficiencies and oxygen vacancies co-modulate the oxygen evolution activity of Ca 4 IrO 6− δ via the lattice oxygen mechanism
Ca 4− x IrO 6− δ particles with Ca deficiencies act as electrocatalysts toward oxygen evolution in acid electrolytes via the lattice oxygen mechanism. The Ca deficiencies and oxygen vacancies co-modulate the OER performance of Ca 4− x IrO 6− δ .
- Open Access
- 20 August 2026
- Published by MDPI AG in Preprints.org
Cu Doped Hollow Urchin-Like RuO2 Nanosphere for Efficient Overall Water Splitting
Although numerous studies have been reported on high-performance Ru-based electrocatalysts for overall water splitting, designing Ru-based material with high activity and stability remains a challenge. Herein, we demonstrate that Cu-doped hollow urchin-like RuO2 nanospheres (Cu-RuO2 HUNSs) can serve as an efficient and stable catalyst for hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and overall water splitting in alkaline media. Benefiting from the doping effect and the unique hollow urchin-like structure, the optimized Cu-RuO2 HUNSs exhibit excellent HER and OER activity and stability. When employed as bifunctional catalyst for overall water splitting, the Cu-RuO2 HUNSs required only a cell voltage of 1.48 V to reach the current density of 10 mA cm-2 in 1 M KOH, outperforming Cu-RuO2 nanoparticles (Cu-RuO2 NPs, 1.56 V) and commercial Pt/C||RuO2 (1.60 V). Corresponding density functional theory (DFT) reveal that the Cu doping effect can weaken the adsorption strength of RuO2 catalysts for the reaction intermediates, which can largely improve the OER performance of RuO2. This work also provides an effective method for synthesizing Ru-based electrocatalysts with high electrochemical activity and stability.
- 20 August 2026
- Published by MDPI AG in Preprints.org
Open AccessCu Doped Hollow Urchin-Like RuO2 Nanosphere for Efficient Overall Water Splitting
Although numerous studies have been reported on high-performance Ru-based electrocatalysts for overall water splitting, designing Ru-based material with high activity and stability remains a challenge. Herein, we demonstrate that Cu-doped hollow urchin-like RuO2 nanospheres (Cu-RuO2 HUNSs) can serve as an efficient and stable catalyst for hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and overall water splitting in alkaline media. Benefiting from the doping effect and the unique hollow urchin-like structure, the optimized Cu-RuO2 HUNSs exhibit excellent HER and OER activity and stability. When employed as bifunctional catalyst for overall water splitting, the Cu-RuO2 HUNSs required only a cell voltage of 1.48 V to reach the current density of 10 mA cm-2 in 1 M KOH, outperforming Cu-RuO2 nanoparticles (Cu-RuO2 NPs, 1.56 V) and commercial Pt/C||RuO2 (1.60 V). Corresponding density functional theory (DFT) reveal that the Cu doping effect can weaken the adsorption strength of RuO2 catalysts for the reaction intermediates, which can largely improve the OER performance of RuO2. This work also provides an effective method for synthesizing Ru-based electrocatalysts with high electrochemical activity and stability.
- 12 November 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (47) , 64392-64402
Tuning the Band Structure of Co 3 Sn 2 S 2 Topological Semimetal for Oxygen Evolution in Alkaline Electrolytes
Co3Sn2S2 (CSS) possesses robust surface states and high conductivity derived from Co atoms with Weyl points located only 60 meV above the Fermi level (Ef), revealing the probability of tuning the electronic band structure of CSS by doping with transition metal atoms. Here, Fe, Ni, and Cu atoms have been successfully incorporated into CSS, which turns out that the Fe0.1-CSS possesses better activity than CSS and IrO2 with an overpotential of 298 mV to reach the current density of 10 mA cm-2 and a Tafel slope of 358.3 mV dec-1 in 1 M KOH. The Fe0.1-CSS also shows better activity and stability than IrO2 as an anode for the anion exchange membrane water electrolyzer in 1 M KOH. Besides, the density functional theory results indicate that the band structure of CSS is adjusted by the incorporation of transition metal atoms, which is related to the regulation of Ef and thus the variation in electrolytic performance. Our findings provide a strategy to further engineer the activity of a topological semimetal, which provides a direction toward material design for catalysis and beyond.
- 12 November 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (47) , 64392-64402
Tuning the Band Structure of Co 3 Sn 2 S 2 Topological Semimetal for Oxygen Evolution in Alkaline Electrolytes
Co3Sn2S2 (CSS) possesses robust surface states and high conductivity derived from Co atoms with Weyl points located only 60 meV above the Fermi level (Ef), revealing the probability of tuning the electronic band structure of CSS by doping with transition metal atoms. Here, Fe, Ni, and Cu atoms have been successfully incorporated into CSS, which turns out that the Fe0.1-CSS possesses better activity than CSS and IrO2 with an overpotential of 298 mV to reach the current density of 10 mA cm-2 and a Tafel slope of 358.3 mV dec-1 in 1 M KOH. The Fe0.1-CSS also shows better activity and stability than IrO2 as an anode for the anion exchange membrane water electrolyzer in 1 M KOH. Besides, the density functional theory results indicate that the band structure of CSS is adjusted by the incorporation of transition metal atoms, which is related to the regulation of Ef and thus the variation in electrolytic performance. Our findings provide a strategy to further engineer the activity of a topological semimetal, which provides a direction toward material design for catalysis and beyond.
- 13 November 2024
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 60 (98) , 14605-14608
Unveiling the effect of codoping in strontium ferrite for oxygen evolution in alkaline media
Co and Ni codoped strontium ferrite particles were prepared by a solid-state strategy and employed as catalysts for the OER. They exhibited a Tafel slope of 55 mV dec−1 and required an overpotential of 334 mV to afford a current density of 10 mA cm−2, which is lower than that of Co and Ni separately doped samples. The DFT calculations reveal the redistribution of local charge around Fe atoms, decrease of energy barriers, and increase of conductivity by doping. This work unveils the effect of codoping on the activities of Fe-based perovskite oxide for the OER, providing a strategy to engineer other perovskite-based materials for catalysis.
- 13 November 2024
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 60 (98) , 14605-14608
Unveiling the effect of codoping in strontium ferrite for oxygen evolution in alkaline media
Co and Ni codoped strontium ferrite particles were prepared by a solid-state strategy and employed as catalysts for the OER. They exhibited a Tafel slope of 55 mV dec−1 and required an overpotential of 334 mV to afford a current density of 10 mA cm−2, which is lower than that of Co and Ni separately doped samples. The DFT calculations reveal the redistribution of local charge around Fe atoms, decrease of energy barriers, and increase of conductivity by doping. This work unveils the effect of codoping on the activities of Fe-based perovskite oxide for the OER, providing a strategy to engineer other perovskite-based materials for catalysis.
- 6 September 2024
- Published by Elsevier in Materials Today Physics
- Vol. 48
Rapid growth of CO2 hydrate as a promising way to mitigate the greenhouse effect
- 6 September 2024
- Published by Elsevier in Materials Today Physics
- Vol. 48
Rapid growth of CO2 hydrate as a promising way to mitigate the greenhouse effect
- 1 July 2024
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 63 (28) , 12764-12773
Synergistic Effect Enables the Dual-Metal Doped Cobalt Telluride Particles as Potential Electrocatalysts for Oxygen Evolution in Alkaline Electrolyte
Cobalt (Co)-based materials have been widely investigated as hopeful noble-metal-free alternatives for the oxygen evolution reaction (OER) in alkaline electrolytes, which is crucial for generating hydrogen by water electrolysis. Herein, cobalt-based telluride particles with good electronic conductivity as anodic electrocatalysts were prepared under vacuum by the solid-state strategy, which display remarkable activities toward the OER. Nickel (Ni) and iron (Fe) codoped cobalt telluride (NiFe-CoTe) exhibits an overpotential of 321 mV to achieve a current density of 10 mA cm-2 and a Tafel slope of 51.8 mV dec-1, outperforming the performances of CoTe, CoTe2, and IrO2. According to the DFT calculation, the adsorbed hydroxyl-assisted adsorbate evolution mechanism was proposed for the OER process of NiFe-CoTe, which reveals the synergetic effect toward OER induced by codoping of the Ni and Fe atoms. This work proposes a rational strategy to prepare cobalt-based tellurides as efficient OER catalysts in alkaline electrolytes, providing a new strategy to prepare and regulate metal-based tellurides for catalysis and beyond.
- 1 July 2024
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 63 (28) , 12764-12773
Synergistic Effect Enables the Dual-Metal Doped Cobalt Telluride Particles as Potential Electrocatalysts for Oxygen Evolution in Alkaline Electrolyte
Cobalt (Co)-based materials have been widely investigated as hopeful noble-metal-free alternatives for the oxygen evolution reaction (OER) in alkaline electrolytes, which is crucial for generating hydrogen by water electrolysis. Herein, cobalt-based telluride particles with good electronic conductivity as anodic electrocatalysts were prepared under vacuum by the solid-state strategy, which display remarkable activities toward the OER. Nickel (Ni) and iron (Fe) codoped cobalt telluride (NiFe-CoTe) exhibits an overpotential of 321 mV to achieve a current density of 10 mA cm-2 and a Tafel slope of 51.8 mV dec-1, outperforming the performances of CoTe, CoTe2, and IrO2. According to the DFT calculation, the adsorbed hydroxyl-assisted adsorbate evolution mechanism was proposed for the OER process of NiFe-CoTe, which reveals the synergetic effect toward OER induced by codoping of the Ni and Fe atoms. This work proposes a rational strategy to prepare cobalt-based tellurides as efficient OER catalysts in alkaline electrolytes, providing a new strategy to prepare and regulate metal-based tellurides for catalysis and beyond.
Motivating Inert Strontium Manganate with Iridium Dopants as Efficient Electrocatalysts for Oxygen Evolution in Acidic Electrolyte
The search for high‐performance and low‐cost electrocatalysts in acid conditions still remains a challenging target. Herein, iridium (Ir) doped strontium manganate (named as Irx‐SMO) is proposed as an efficient and durable low‐iridium electrocatalyst for water oxidation in acidic media. The Ir0.1‐SMO with 75% less iridium in comparison to that of iridium dioxide (IrO2) exhibits excellent performance for oxygen evolution reaction (OER), which is even better than most of the iridium‐based oxide electrocatalysts. The theoretical outcomes confirm the activation of the inert manganese sites in strontium manganate by the incorporation of iridium dopants. This work reveals the boosted effect of the iridium dopants on the OER activity of strontium manganate, providing a strategy to tune the activity of manganese‐based perovskites in electrocatalysis.
Motivating Inert Strontium Manganate with Iridium Dopants as Efficient Electrocatalysts for Oxygen Evolution in Acidic Electrolyte
The search for high‐performance and low‐cost electrocatalysts in acid conditions still remains a challenging target. Herein, iridium (Ir) doped strontium manganate (named as Irx‐SMO) is proposed as an efficient and durable low‐iridium electrocatalyst for water oxidation in acidic media. The Ir0.1‐SMO with 75% less iridium in comparison to that of iridium dioxide (IrO2) exhibits excellent performance for oxygen evolution reaction (OER), which is even better than most of the iridium‐based oxide electrocatalysts. The theoretical outcomes confirm the activation of the inert manganese sites in strontium manganate by the incorporation of iridium dopants. This work reveals the boosted effect of the iridium dopants on the OER activity of strontium manganate, providing a strategy to tune the activity of manganese‐based perovskites in electrocatalysis.
- Open Access
- 22 February 2023
- Published by MDPI AG in Nanomaterials
- Vol. 13 (5) , 797
Iron-Doped Monoclinic Strontium Iridate as a Highly Efficient Oxygen Evolution Electrocatalyst in Acidic Media
Ir-based perovskite oxides are efficient electrocatalysts for anodic oxygen evolution. This work presents a systematic study of the doping effects of Fe on the OER activity of monoclinic SrIrO3 to reduce the consumption of Ir. The monoclinic structure of SrIrO3 was retained when the Fe/Ir ratio was less than 0.1/0.9. Upon further increases in the Fe/Ir ratio, the structure of SrIrO3 changed from a 6H to 3C phase. The SrFe0.1Ir0.9O3 had the highest activity among the investigated catalysts with the lowest overpotential of 238 mV at 10 mA cm−2 in 0.1 M HClO4 solution, which could be attributed to the oxygen vacancies induced by the Fe dopant and the IrOx formed upon the dissolution of Sr and Fe. The formation of oxygen vacancies and uncoordinated sites at the molecular level may be responsible for the improved performance. This work explored the effect of Fe dopants in boosting the OER activity of SrIrO3, thus providing a detailed reference to tune perovskite-based electrocatalyst by Fe for other applications.
- 22 February 2023
- Published by MDPI AG in Nanomaterials
- Vol. 13 (5) , 797
Open AccessIron-Doped Monoclinic Strontium Iridate as a Highly Efficient Oxygen Evolution Electrocatalyst in Acidic Media
Ir-based perovskite oxides are efficient electrocatalysts for anodic oxygen evolution. This work presents a systematic study of the doping effects of Fe on the OER activity of monoclinic SrIrO3 to reduce the consumption of Ir. The monoclinic structure of SrIrO3 was retained when the Fe/Ir ratio was less than 0.1/0.9. Upon further increases in the Fe/Ir ratio, the structure of SrIrO3 changed from a 6H to 3C phase. The SrFe0.1Ir0.9O3 had the highest activity among the investigated catalysts with the lowest overpotential of 238 mV at 10 mA cm−2 in 0.1 M HClO4 solution, which could be attributed to the oxygen vacancies induced by the Fe dopant and the IrOx formed upon the dissolution of Sr and Fe. The formation of oxygen vacancies and uncoordinated sites at the molecular level may be responsible for the improved performance. This work explored the effect of Fe dopants in boosting the OER activity of SrIrO3, thus providing a detailed reference to tune perovskite-based electrocatalyst by Fe for other applications.
- Open Access
- 10 August 2022
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 12 (35) , 22581-22589
Stretched three-dimensional white graphene with a tremendous lattice thermal conductivity increase rate
Despite the increasing interest in the physical properties of the newly synthesized three-dimensional (3D) nano-architectured graphene, there are still few studies on the thermal transport properties of this family of materials. In the present work, heat transport of 3D h-BN and its mechanical response are systematically explored through first principles calculations. It is fascinating to find that the thermal conductivity of the 3D h-BN honeycomb structure could be significantly modulated by mechanical tension. Its lattice thermal conductivity perpendicular to the hole axis increases by 7.2 times at 6% critical strain, compared to only 0.67 times for that of the strained 3D graphene counterpart. The structure's thermal conductivity versus mechanical tension differs quantitatively and qualitatively from the monotonic downward trend of traditional bulk diamond or silicon under tension. This deviation from the classic behavior could be attributed to the modification of the phonon lifetimes, together with the competition between group velocities of low- and high-lying phonons under strain. Finally, the phonon vibrational modes contribution analysis indicates that the BN ribbon atoms contribute mainly at a lower frequency range. Our results provide important insights into potential employment of nano-architectured 3D white graphene for thermal management in relevant industrial applications.
- 10 August 2022
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 12 (35) , 22581-22589
Open AccessStretched three-dimensional white graphene with a tremendous lattice thermal conductivity increase rate
Despite the increasing interest in the physical properties of the newly synthesized three-dimensional (3D) nano-architectured graphene, there are still few studies on the thermal transport properties of this family of materials. In the present work, heat transport of 3D h-BN and its mechanical response are systematically explored through first principles calculations. It is fascinating to find that the thermal conductivity of the 3D h-BN honeycomb structure could be significantly modulated by mechanical tension. Its lattice thermal conductivity perpendicular to the hole axis increases by 7.2 times at 6% critical strain, compared to only 0.67 times for that of the strained 3D graphene counterpart. The structure's thermal conductivity versus mechanical tension differs quantitatively and qualitatively from the monotonic downward trend of traditional bulk diamond or silicon under tension. This deviation from the classic behavior could be attributed to the modification of the phonon lifetimes, together with the competition between group velocities of low- and high-lying phonons under strain. Finally, the phonon vibrational modes contribution analysis indicates that the BN ribbon atoms contribute mainly at a lower frequency range. Our results provide important insights into potential employment of nano-architectured 3D white graphene for thermal management in relevant industrial applications.
- 1 January 2021
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 46 (2) , 2018-2025
Tailoring the activity of NiFe layered double hydroxide with CeCO3OH as highly efficient water oxidation electrocatalyst
- 1 January 2021
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 46 (2) , 2018-2025
Tailoring the activity of NiFe layered double hydroxide with CeCO3OH as highly efficient water oxidation electrocatalyst