Cihang Lu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Cihang Lu has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Zeyun Wu
Department of Mechanical and Nuclear Engineering, Virginia Commonwealth University
7 shared publications Arantxa Cuadra
Brookhaven National Laboratory
5 shared publications- Nicolas E. Stauff
Argonne National Laboratory
2 shared publications - Amanda M. Bachmann
Argonne National Laboratory, Lemont, IL 60439, USA
1 shared publication - Arantxa Cuadra
Brookhaven National Laboratory, Upton, NY 11973, USA
1 shared publication Athi Varuttamaseni
Brookhaven National Laboratory
1 shared publication
Latest Publications
- 18 September 2026
- Published by Taylor & Francis in Fusion Science and Technology
- p. 1-9
Evaluation of Flux- and Depletion-Based Methodologies for Tritium Breeding Ratio Prediction: Limitations of Current 7 Li Nuclear Data Processing
I. Fusion energy offers the promise of a clean, virtually limitless, and inherently safe power source. The specific energy of fusion reactions is approximately four times greater than that of fissi...
- 18 September 2026
- Published by Taylor & Francis in Fusion Science and Technology
- p. 1-9
Evaluation of Flux- and Depletion-Based Methodologies for Tritium Breeding Ratio Prediction: Limitations of Current 7 Li Nuclear Data Processing
I. Fusion energy offers the promise of a clean, virtually limitless, and inherently safe power source. The specific energy of fusion reactions is approximately four times greater than that of fissi...
- Open Access
Economic Assessment of Recycling High Assay Low Enriched Uranium Sodium Cooled Fast Reactor Used Nuclear Fuels
Sodium-cooled fast reactors (SFRs) are being developed with various fuel cycle strategies, including once-through and recycling options. Initial U.S. deployments are expected to use compact SFR cores fueled with high-assay low-enriched uranium (HALEU). As SFR technology advances, higher fuel burnups and lower enrichments are anticipated. This study provides an economic assessment of utilizing HALEU in SFRs with a once-through fuel cycle (OTC) compared to recycling used nuclear fuel (UNF) across a range of advanced fuel and reactor designs. As an alternative to current once-through options (FC #1), three recycling alternatives are evaluated: (FC #2) recovered uranium (RU) downblended for pressurized water reactor (PWR) fuel, (FC #3) RU re-enriched for SFR fuel, and (FC #4) RU co-recycled with transuranics (RU/TRU) for SFR fuel. Results indicate that recycling RU from SFR UNF in both fresh PWR and SFR fuel can be economically advantageous compared to the OTC approach, provided the U-235 content remains sufficiently high—a condition met by current and near-term SFR designs. Increased burnup and in situ plutonium production in SFRs reduce overall OTC costs and natural uranium requirements. However, the economic viability of recycling SFR RU depends strongly on the specific UNF composition and the recycling pathway chosen. Recycling both RU and TRU consistently offers the lowest fuel cycle costs across all scenarios, even as fuel and reactor designs advance. These findings provide a framework for identifying when recycling offers economic benefits over direct disposal, informing future fuel cycle decisions for advanced reactors.
Open AccessEconomic Assessment of Recycling High Assay Low Enriched Uranium Sodium Cooled Fast Reactor Used Nuclear Fuels
Sodium-cooled fast reactors (SFRs) are being developed with various fuel cycle strategies, including once-through and recycling options. Initial U.S. deployments are expected to use compact SFR cores fueled with high-assay low-enriched uranium (HALEU). As SFR technology advances, higher fuel burnups and lower enrichments are anticipated. This study provides an economic assessment of utilizing HALEU in SFRs with a once-through fuel cycle (OTC) compared to recycling used nuclear fuel (UNF) across a range of advanced fuel and reactor designs. As an alternative to current once-through options (FC #1), three recycling alternatives are evaluated: (FC #2) recovered uranium (RU) downblended for pressurized water reactor (PWR) fuel, (FC #3) RU re-enriched for SFR fuel, and (FC #4) RU co-recycled with transuranics (RU/TRU) for SFR fuel. Results indicate that recycling RU from SFR UNF in both fresh PWR and SFR fuel can be economically advantageous compared to the OTC approach, provided the U-235 content remains sufficiently high—a condition met by current and near-term SFR designs. Increased burnup and in situ plutonium production in SFRs reduce overall OTC costs and natural uranium requirements. However, the economic viability of recycling SFR RU depends strongly on the specific UNF composition and the recycling pathway chosen. Recycling both RU and TRU consistently offers the lowest fuel cycle costs across all scenarios, even as fuel and reactor designs advance. These findings provide a framework for identifying when recycling offers economic benefits over direct disposal, informing future fuel cycle decisions for advanced reactors.
- 9 June 2026
- Published by Taylor & Francis in Nuclear Technology
- p. 1-14
Fuel Fabrication Specification Impact Analysis for NBSR LEU Conversion
- 9 June 2026
- Published by Taylor & Francis in Nuclear Technology
- p. 1-14
Fuel Fabrication Specification Impact Analysis for NBSR LEU Conversion
- 11 June 2025
- Published by Taylor & Francis in Nuclear Technology
- Vol. 212 (5) , 1350-1365
Feasibility of Recycling Discharged Microreactor Heavy Metal in Light Water and Sodium-Cooled Fast Reactors: A Neutronics Analysis
- 11 June 2025
- Published by Taylor & Francis in Nuclear Technology
- Vol. 212 (5) , 1350-1365
Feasibility of Recycling Discharged Microreactor Heavy Metal in Light Water and Sodium-Cooled Fast Reactors: A Neutronics Analysis
- 14 June 2024
- Published by Taylor & Francis in Nuclear Technology
- Vol. 211 (4) , 690-707
The Use of High-Density UN Fuel in Heat-Pipe Microreactors
- 14 June 2024
- Published by Taylor & Francis in Nuclear Technology
- Vol. 211 (4) , 690-707
The Use of High-Density UN Fuel in Heat-Pipe Microreactors
- 1 February 2023
- Published by Taylor & Francis in Nuclear Science and Engineering
- Vol. 197 (6) , 1213-1238
Demonstrating Computational Equivalence Between Continuous and Discrete Adjoint Methods by Calculating Time-Dependent Adjoint Solutions with Neutron Diffusion Models
The continuous adjoint method and the discrete adjoint method are two alternative approaches used to calculate adjoint solutions for adjoint systems. The continuous adjoint method derives adjoint equations analytically from continuous forward equations and then solves the adjoint equations either analytically or numerically in a discretized form whereas the discrete adjoint method calculates the adjoint solutions directly from the discretized forward equations. With regard to the methodology development and calculation procedure, distinct differences are well recognized between the two methods. For certain reasons, both methods are exclusively preferred and commonly used by different computational communities, but limited studies clarify the connections between the two adjoint methods from either of the communities. This paper demonstrates the computational equivalence between the continuous and discrete adjoint methods by investigating time-dependent adjoint solutions to the two-group neutron diffusion model in nuclear reactor analysis problems using both methods. Adjoint solutions can be used to estimate system parameters for reactor safety analysis. Appropriate final state conditions for the adjoint systems are specified in both of the methods, and the conditions are clarified with proper physical explanations. With the help of an event-based case study on neutron diffusion models, the accuracy of the time-dependent adjoint fluxes obtained from both methods is verified, and the pros and cons of both adjoint methods are examined. More importantly, the computational equivalence of both methods is demonstrated when they are applied to multigroup neutron diffusion systems. The advantage of calculating time-dependent adjoint fluxes by directly solving time-dependent adjoint systems rather than taking steady-state approximations as in common practice is also demonstrated.
- 1 February 2023
- Published by Taylor & Francis in Nuclear Science and Engineering
- Vol. 197 (6) , 1213-1238
Demonstrating Computational Equivalence Between Continuous and Discrete Adjoint Methods by Calculating Time-Dependent Adjoint Solutions with Neutron Diffusion Models
The continuous adjoint method and the discrete adjoint method are two alternative approaches used to calculate adjoint solutions for adjoint systems. The continuous adjoint method derives adjoint equations analytically from continuous forward equations and then solves the adjoint equations either analytically or numerically in a discretized form whereas the discrete adjoint method calculates the adjoint solutions directly from the discretized forward equations. With regard to the methodology development and calculation procedure, distinct differences are well recognized between the two methods. For certain reasons, both methods are exclusively preferred and commonly used by different computational communities, but limited studies clarify the connections between the two adjoint methods from either of the communities. This paper demonstrates the computational equivalence between the continuous and discrete adjoint methods by investigating time-dependent adjoint solutions to the two-group neutron diffusion model in nuclear reactor analysis problems using both methods. Adjoint solutions can be used to estimate system parameters for reactor safety analysis. Appropriate final state conditions for the adjoint systems are specified in both of the methods, and the conditions are clarified with proper physical explanations. With the help of an event-based case study on neutron diffusion models, the accuracy of the time-dependent adjoint fluxes obtained from both methods is verified, and the pros and cons of both adjoint methods are examined. More importantly, the computational equivalence of both methods is demonstrated when they are applied to multigroup neutron diffusion systems. The advantage of calculating time-dependent adjoint fluxes by directly solving time-dependent adjoint systems rather than taking steady-state approximations as in common practice is also demonstrated.
- 18 May 2022
- Published by Taylor & Francis in Nuclear Technology
- Vol. 208 (10) , 1577-1590
A New Method to Efficiently Estimate the Equilibrium State of Pebble Bed Reactors
Equilibrium state generation for the pebble bed reactor (PBR) is challenging due to the need to simultaneously account for both pebble movement and changes in fuel compositions. Multigroup diffusion codes have been historically employed to generate the equilibrium state and perform conventional neutronics calculations for PBRs, while neutron cross-section generation has been challenging due to the double heterogeneity of PBRs. Thanks to the capability to treat the double heterogeneity naturally, continuous-energy Monte Carlo (MC) methods are more suitable for detailed PBR analysis, but at the cost of significantly higher computing power. This paper presents a new Methodology to Efficiently Estimate the Equilibrium State of a PBR (MEEES-PBR) to generate equilibrium-state MC models for PBRs at lower computational expense. The MEEES-PBR is expected to contribute to the future development of PBR designs by accelerating the efforts in core designs and parametric studies. The theory of the MEEES-PBR is introduced in detail in this paper, and the procedure is demonstrated via an example application to the 165-MW(thermal) Xe-100 design. The computational cost and the accuracy of the MEEES-PBR are discussed to prove its viability.
- 18 May 2022
- Published by Taylor & Francis in Nuclear Technology
- Vol. 208 (10) , 1577-1590
A New Method to Efficiently Estimate the Equilibrium State of Pebble Bed Reactors
Equilibrium state generation for the pebble bed reactor (PBR) is challenging due to the need to simultaneously account for both pebble movement and changes in fuel compositions. Multigroup diffusion codes have been historically employed to generate the equilibrium state and perform conventional neutronics calculations for PBRs, while neutron cross-section generation has been challenging due to the double heterogeneity of PBRs. Thanks to the capability to treat the double heterogeneity naturally, continuous-energy Monte Carlo (MC) methods are more suitable for detailed PBR analysis, but at the cost of significantly higher computing power. This paper presents a new Methodology to Efficiently Estimate the Equilibrium State of a PBR (MEEES-PBR) to generate equilibrium-state MC models for PBRs at lower computational expense. The MEEES-PBR is expected to contribute to the future development of PBR designs by accelerating the efforts in core designs and parametric studies. The theory of the MEEES-PBR is introduced in detail in this paper, and the procedure is demonstrated via an example application to the 165-MW(thermal) Xe-100 design. The computational cost and the accuracy of the MEEES-PBR are discussed to prove its viability.
- 4 May 2021
- Published by Taylor & Francis in Nuclear Technology
- Vol. 207 (5) , 692-710
Enhancing the One-Dimensional SFR Thermal Stratification Model via Advanced Inverse Uncertainty Quantification Methods
Thermal stratification (TS) is a thermal-fluid phenomenon that can introduce large uncertainties to nuclear reactor safety. The stratified layers caused by TS can lead to temperature oscillations in the reactor core. They can also result in damages to both the reactor vessel and in-vessel components due to the growth of thermal fatigue cracks. More importantly, TS can impede the establishment of natural circulation, which is widely used for passive cooling and ensures the inherent safety of numerous reactor designs. A fast-running one-dimensional (1-D) model was recently developed in our research group to predict the TS phenomenon in pool-type sodium-cooled fast reactors. The efficient 1-D model provided reasonable temperature predictions for the test conditions investigated, but nonnegligible discrepancies between the 1-D predictions and the experimental temperature measurements were observed. These discrepancies are attributed to the model uncertainties (also known as model bias or errors) in the 1-D model and the parameter uncertainties in the input parameters. In this study, we first recognized through a forward uncertainty analysis that the observed discrepancies between the computational predictions and the experimental temperature measurements could not be explained solely by input uncertainty propagation. We then performed an inverse uncertainty quantification (UQ) study to reduce the model uncertainties of the 1-D model using a modular Bayesian approach based on experimental data. Inverse UQ serves as a data assimilation process to simultaneously minimize the mismatches between the predictions and experimental measurements, while quantifying the associated parameter uncertainties. The solutions of the modular Bayesian approach were in the form of posterior probability density functions, which were explored by rigorous Markov Chain Monte Carlo sampling. Results showed that the quantified parameters obtained from the inverse UQ effectively improved the predictive capability of the 1-D TS model.
- 4 May 2021
- Published by Taylor & Francis in Nuclear Technology
- Vol. 207 (5) , 692-710
Enhancing the One-Dimensional SFR Thermal Stratification Model via Advanced Inverse Uncertainty Quantification Methods
Thermal stratification (TS) is a thermal-fluid phenomenon that can introduce large uncertainties to nuclear reactor safety. The stratified layers caused by TS can lead to temperature oscillations in the reactor core. They can also result in damages to both the reactor vessel and in-vessel components due to the growth of thermal fatigue cracks. More importantly, TS can impede the establishment of natural circulation, which is widely used for passive cooling and ensures the inherent safety of numerous reactor designs. A fast-running one-dimensional (1-D) model was recently developed in our research group to predict the TS phenomenon in pool-type sodium-cooled fast reactors. The efficient 1-D model provided reasonable temperature predictions for the test conditions investigated, but nonnegligible discrepancies between the 1-D predictions and the experimental temperature measurements were observed. These discrepancies are attributed to the model uncertainties (also known as model bias or errors) in the 1-D model and the parameter uncertainties in the input parameters. In this study, we first recognized through a forward uncertainty analysis that the observed discrepancies between the computational predictions and the experimental temperature measurements could not be explained solely by input uncertainty propagation. We then performed an inverse uncertainty quantification (UQ) study to reduce the model uncertainties of the 1-D model using a modular Bayesian approach based on experimental data. Inverse UQ serves as a data assimilation process to simultaneously minimize the mismatches between the predictions and experimental measurements, while quantifying the associated parameter uncertainties. The solutions of the modular Bayesian approach were in the form of posterior probability density functions, which were explored by rigorous Markov Chain Monte Carlo sampling. Results showed that the quantified parameters obtained from the inverse UQ effectively improved the predictive capability of the 1-D TS model.
- 13 April 2021
- Published by Taylor & Francis in Nuclear Technology
- Vol. 208 (1) , 37-48
Uncertainty Quantification of the 1-D SFR Thermal Stratification Model via the Latin Hypercube Sampling Monte Carlo Method
A one-dimensional (1-D) thermal stratification (TS) model was recently developed in our research group to predict the TS phenomenon in pool-type sodium-cooled fast reactors. This paper performs uncertainty quantification (UQ) of the 1-D TS model to evaluate its performance by considering the aleatoric uncertainties that existed in the model parameters and to identify the plausible sources of the epistemic uncertainties. The Latin hypercube sampling–Monte Carlo method (LHS-MC), which is elaborated with an example in this paper to facilitate its understanding and implementation, is used for the UQ process. The advantages of LHS-MC, including both better stability and better accuracy than the conventional random sampling–Monte Carlo method with fewer realizations, are demonstrated in this paper. In total, 648 temperature measurements acquired from nine experimental transients performed in a university-scale Thermal Stratification Experimental Facility are used to evaluate the performance of the computational 1-D TS model. The UQ result shows that 77.5% of the experimental data can be predicted by the 1-D TS model within uncertainty ranges, which indicates the good performance of the computational model when the aleatoric uncertainties are correctly captured. The rest 22.5% of the experimental data are found located outside of the uncertainty ranges, which reveals the existence of the epistemic uncertainties caused by the lack of understanding of the TS phenomenon and defects in the 1-D model. The simple jet model currently employed by the 1-D TS model is thought to be one of the attributors to these defects.
- 13 April 2021
- Published by Taylor & Francis in Nuclear Technology
- Vol. 208 (1) , 37-48
Uncertainty Quantification of the 1-D SFR Thermal Stratification Model via the Latin Hypercube Sampling Monte Carlo Method
A one-dimensional (1-D) thermal stratification (TS) model was recently developed in our research group to predict the TS phenomenon in pool-type sodium-cooled fast reactors. This paper performs uncertainty quantification (UQ) of the 1-D TS model to evaluate its performance by considering the aleatoric uncertainties that existed in the model parameters and to identify the plausible sources of the epistemic uncertainties. The Latin hypercube sampling–Monte Carlo method (LHS-MC), which is elaborated with an example in this paper to facilitate its understanding and implementation, is used for the UQ process. The advantages of LHS-MC, including both better stability and better accuracy than the conventional random sampling–Monte Carlo method with fewer realizations, are demonstrated in this paper. In total, 648 temperature measurements acquired from nine experimental transients performed in a university-scale Thermal Stratification Experimental Facility are used to evaluate the performance of the computational 1-D TS model. The UQ result shows that 77.5% of the experimental data can be predicted by the 1-D TS model within uncertainty ranges, which indicates the good performance of the computational model when the aleatoric uncertainties are correctly captured. The rest 22.5% of the experimental data are found located outside of the uncertainty ranges, which reveals the existence of the epistemic uncertainties caused by the lack of understanding of the TS phenomenon and defects in the 1-D model. The simple jet model currently employed by the 1-D TS model is thought to be one of the attributors to these defects.