Baishan Liu
Research Subjects
Baishan Liu has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Xiankun Zhang
Academy for Advanced Interdisciplinary Science and Technology, Key Laboratory of Advanced Materials and Devices for Post-Moore Chips Ministry of Education, State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing, PR China
5 shared publications Huihui Yu
Academy for Advanced Interdisciplinary Science and Technology School of Materials Science and Engineering University of Science and Technology Beijing Beijing 100083 P. R. China
4 shared publicationsJiankun Xiao
Beijing Advanced Innovation Center for Materials Genome Engineering Beijing Key Laboratory for Advanced Energy Materials and Technologies University of Science and Technology Beijing Beijing 100083 P. R. China
4 shared publicationsJunli Du
Beijing Advanced Innovation Center for Materials Genome Engineering Beijing Key Laboratory for Advanced Energy Materials and Technologies University of Science and Technology Beijing Beijing 100083 P. R. China
4 shared publicationsQingliang Liao
Academy for Advanced Interdisciplinary Science and Technology School of Materials Science and Engineering University of Science and Technology Beijing Beijing 100083 P. R. China
4 shared publications- Yue Zhang
University of Science and Technology Beijing
4 shared publications
Latest Publications
- 23 October 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (17)
Insights into the effect of graphene on Cu electrical conductivity: Experimental investigations of Cu foil coated with graphene
Cu foil is one of the key engineering materials with extensive applications in microelectronics and energy storage systems, with high electrical conductivity being crucial to device performance and energy efficiency. Graphene (Gr) is a promising material to enhance Cu conductivity due to its extraordinarily high carrier mobility, but the experimental results on Cu/Gr composites are controversial, and the fundamental mechanism is not yet clear by experiments. In this work, we prepare a unit experimental model system, which is a 25 μm thick Cu foil with atomic layer graphene grown on the surface. Characterization analysis shows that the Cu/Gr interface is the physisorption type without chemical bonding formed. Impressively, the angstrom thick graphene layer increases the conductivity of micrometer thick Cu foil by 2.8% IACS (International annealed Cu standard, 5.80 × 107 S m−1), displaying an enormously high volumetric enhancement effect. The Hall effect measurements disclose that the graphene layer yields a light reduction of carrier concentration but a more pronounced increase in carrier mobility. In addition, in situ electrical measurements under uniaxial tensile strain show that the graphene layer keeps the strained foil with constantly lower electrical resistance than pristine Cu foil until failure. The present work provides insights into the mechanism for graphene's effect on Cu conductivity, and the model system demonstrated is viable for a wide variety of metallic foil systems, where high electrical conductivity is needed.
- 23 October 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (17)
Insights into the effect of graphene on Cu electrical conductivity: Experimental investigations of Cu foil coated with graphene
Cu foil is one of the key engineering materials with extensive applications in microelectronics and energy storage systems, with high electrical conductivity being crucial to device performance and energy efficiency. Graphene (Gr) is a promising material to enhance Cu conductivity due to its extraordinarily high carrier mobility, but the experimental results on Cu/Gr composites are controversial, and the fundamental mechanism is not yet clear by experiments. In this work, we prepare a unit experimental model system, which is a 25 μm thick Cu foil with atomic layer graphene grown on the surface. Characterization analysis shows that the Cu/Gr interface is the physisorption type without chemical bonding formed. Impressively, the angstrom thick graphene layer increases the conductivity of micrometer thick Cu foil by 2.8% IACS (International annealed Cu standard, 5.80 × 107 S m−1), displaying an enormously high volumetric enhancement effect. The Hall effect measurements disclose that the graphene layer yields a light reduction of carrier concentration but a more pronounced increase in carrier mobility. In addition, in situ electrical measurements under uniaxial tensile strain show that the graphene layer keeps the strained foil with constantly lower electrical resistance than pristine Cu foil until failure. The present work provides insights into the mechanism for graphene's effect on Cu conductivity, and the model system demonstrated is viable for a wide variety of metallic foil systems, where high electrical conductivity is needed.
- Open Access
Building a Layer-Structured Aluminum/Graphene Composite with Significant Improvement in Electrical Conductivity
Aluminum (Al) and its alloys are widely used in various fields due to their excellent physical properties. Although many efforts have been made to fabricate an Al-based composite, they usually results in a significant decrease in electrical conductivity. Herein, a special layer-structured Al/graphene (Gr)/Al composite was successfully designed and fabricated through a facile method using the ultrasonic spraying of graphene powder with alumina removal and a subsequent vacuum hot-pressing process. The as-obtained Al/Gr/Al composite presents a significantly enhanced electrical conductivity of 66% IACS, which is much higher than that of other reported Al-based composites, while it still maintains similar mechanical properties. This work provides a new strategy for the development of highly conductive Al-based composites, which would be very useful and important for practical applications.
Open AccessBuilding a Layer-Structured Aluminum/Graphene Composite with Significant Improvement in Electrical Conductivity
Aluminum (Al) and its alloys are widely used in various fields due to their excellent physical properties. Although many efforts have been made to fabricate an Al-based composite, they usually results in a significant decrease in electrical conductivity. Herein, a special layer-structured Al/graphene (Gr)/Al composite was successfully designed and fabricated through a facile method using the ultrasonic spraying of graphene powder with alumina removal and a subsequent vacuum hot-pressing process. The as-obtained Al/Gr/Al composite presents a significantly enhanced electrical conductivity of 66% IACS, which is much higher than that of other reported Al-based composites, while it still maintains similar mechanical properties. This work provides a new strategy for the development of highly conductive Al-based composites, which would be very useful and important for practical applications.
- Open Access
- 18 August 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 134 (7)
Defect effect of graphene on interface properties of copper/graphene/copper composite: A first-principles study
The introduction of defects in graphene will affect the mechanical and electrical properties of the composite interface. We investigate the effect of Stone–Wales (S-W), single-vacancy (S-V), and double-vacancy (D-V) defects on interface properties of copper/graphene/copper (Cu/Gr/Cu) sandwich models using the first-principles study. The results indicate that most defects forming in the Cu/Gr/Cu interface have lower formation energy than that in the free graphene slab. The introduction of defects is beneficial to enhance interface bonding while decreasing electrical properties due to electron scattering. By analyzing the differential charge density of all the Cu/Gr/Cu models with defects, we show that the defects cause changes in electron distribution and facilitate charge transfer between graphene and adjacent copper layers by altering the atomic layer distance.
- 18 August 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 134 (7)
Open AccessDefect effect of graphene on interface properties of copper/graphene/copper composite: A first-principles study
The introduction of defects in graphene will affect the mechanical and electrical properties of the composite interface. We investigate the effect of Stone–Wales (S-W), single-vacancy (S-V), and double-vacancy (D-V) defects on interface properties of copper/graphene/copper (Cu/Gr/Cu) sandwich models using the first-principles study. The results indicate that most defects forming in the Cu/Gr/Cu interface have lower formation energy than that in the free graphene slab. The introduction of defects is beneficial to enhance interface bonding while decreasing electrical properties due to electron scattering. By analyzing the differential charge density of all the Cu/Gr/Cu models with defects, we show that the defects cause changes in electron distribution and facilitate charge transfer between graphene and adjacent copper layers by altering the atomic layer distance.
- Open Access
Transition Metal Dichalcogenides for High−Performance Aqueous Zinc Ion Batteries
Aqueous zinc ion batteries (ZIBs) with cost—effectiveness, air stability, and remarkable energy density have attracted increasing attention for potential energy storage system applications. The unique electrical properties and competitive layer spacing of transition metal dichalcogenides (TMDs) provide dramatical freedom for facilitating ion diffusion and intercalation, making TMDs suitable for ZIB cathode materials. The recently updated advance of TMDs for high−performance ZIB cathode materials have been summarized in this review. In particular, the key modification strategies of TMDs for realizing the full potential in ZIBs are highlighted. Finally, the insights for further development of TMDs as ZIB cathodes are proposed, to guide the research directions related to the design of aqueous ZIBs while approaching the theoretical performance metrics.
Open AccessTransition Metal Dichalcogenides for High−Performance Aqueous Zinc Ion Batteries
Aqueous zinc ion batteries (ZIBs) with cost—effectiveness, air stability, and remarkable energy density have attracted increasing attention for potential energy storage system applications. The unique electrical properties and competitive layer spacing of transition metal dichalcogenides (TMDs) provide dramatical freedom for facilitating ion diffusion and intercalation, making TMDs suitable for ZIB cathode materials. The recently updated advance of TMDs for high−performance ZIB cathode materials have been summarized in this review. In particular, the key modification strategies of TMDs for realizing the full potential in ZIBs are highlighted. Finally, the insights for further development of TMDs as ZIB cathodes are proposed, to guide the research directions related to the design of aqueous ZIBs while approaching the theoretical performance metrics.
- 27 September 2021
- Published by Wiley in Advanced Materials
- Vol. 33 (45) , 2104935
Molecule‐Upgraded van der Waals Contacts for Schottky‐Barrier‐Free Electronics
The applications of any ultrathin semiconductor device are inseparable from high‐quality metal–semiconductor contacts with designed Schottky barriers. Building van der Waals (vdWs) contacts of 2D semiconductors represents an advanced strategy of lowering the Schottky barrier height by reducing interface states, but will finally fail at the theoretical minimum barrier due to the inevitable energy difference between the semiconductor electron affinity and the metal work function. Here, an effective molecule optimization strategy is reported to upgrade the general vdWs contacts, achieving near‐zero Schottky barriers and creating high‐performance electronic devices. The molecule treatment can induce the defect healing effect in p‐type semiconductors and further enhance the hole density, leading to an effectively thinned Schottky barrier width and improved carrier interface transmission efficiency. With an ultrathin Schottky barrier width of ≈2.17 nm and outstanding contact resistance of ≈9 kΩ µm in the optimized Au/WSe2 contacts, an ultrahigh field‐effect mobility of ≈148 cm2 V−1 s−1 in chemical vapor deposition grown WSe2 flakes is achieved. Unlike conventional chemical treatments, this molecule upgradation strategy leaves no residue and displays a high‐temperature stability at >200 °C. Furthermore, the Schottky barrier optimization is generalized to other metal–semiconductor contacts, including 1T‐PtSe2/WSe2, 1T′‐MoTe2/WSe2, 2H‐NbS2/WSe2, and Au/PdSe2, defining a simple, universal, and scalable method to minimize contact resistance.
- 27 September 2021
- Published by Wiley in Advanced Materials
- Vol. 33 (45) , 2104935
Molecule‐Upgraded van der Waals Contacts for Schottky‐Barrier‐Free Electronics
The applications of any ultrathin semiconductor device are inseparable from high‐quality metal–semiconductor contacts with designed Schottky barriers. Building van der Waals (vdWs) contacts of 2D semiconductors represents an advanced strategy of lowering the Schottky barrier height by reducing interface states, but will finally fail at the theoretical minimum barrier due to the inevitable energy difference between the semiconductor electron affinity and the metal work function. Here, an effective molecule optimization strategy is reported to upgrade the general vdWs contacts, achieving near‐zero Schottky barriers and creating high‐performance electronic devices. The molecule treatment can induce the defect healing effect in p‐type semiconductors and further enhance the hole density, leading to an effectively thinned Schottky barrier width and improved carrier interface transmission efficiency. With an ultrathin Schottky barrier width of ≈2.17 nm and outstanding contact resistance of ≈9 kΩ µm in the optimized Au/WSe2 contacts, an ultrahigh field‐effect mobility of ≈148 cm2 V−1 s−1 in chemical vapor deposition grown WSe2 flakes is achieved. Unlike conventional chemical treatments, this molecule upgradation strategy leaves no residue and displays a high‐temperature stability at >200 °C. Furthermore, the Schottky barrier optimization is generalized to other metal–semiconductor contacts, including 1T‐PtSe2/WSe2, 1T′‐MoTe2/WSe2, 2H‐NbS2/WSe2, and Au/PdSe2, defining a simple, universal, and scalable method to minimize contact resistance.
- 14 January 2021
- Published by Wiley in Advanced Materials
- Vol. 33 (7) , e2007051
Hidden Vacancy Benefit in Monolayer 2D Semiconductors
Monolayer 2D semiconductors (e.g., MoS2) are of considerable interest for atomically thin transistors but generally limited by insufficient carrier mobility or driving current. Minimizing the lattice defects in 2D semiconductors represents a common strategy to improve their electronic properties, but has met with limited success to date. Herein, a hidden benefit of the atomic vacancies in monolayer 2D semiconductors to push their performance limit is reported. By purposely tailoring the sulfur vacancies (SVs) to an optimum density of 4.7% in monolayer MoS2, an unusual mobility enhancement is obtained and a record‐high carrier mobility (>115 cm2 V−1 s−1) is achieved, realizing monolayer MoS2 transistors with an exceptional current density (>0.60 mA µm−1) and a record‐high on/off ratio >1010, and enabling a logic inverter with an ultrahigh voltage gain >100. The systematic transport studies reveal that the counterintuitive vacancy‐enhanced transport originates from a nearest‐neighbor hopping conduction model, in which an optimum SV density is essential for maximizing the charge hopping probability. Lastly, the vacancy benefit into other monolayer 2D semiconductors is further generalized; thus, a general strategy for tailoring the charge transport properties of monolayer materials is defined.
- 14 January 2021
- Published by Wiley in Advanced Materials
- Vol. 33 (7) , e2007051
Hidden Vacancy Benefit in Monolayer 2D Semiconductors
Monolayer 2D semiconductors (e.g., MoS2) are of considerable interest for atomically thin transistors but generally limited by insufficient carrier mobility or driving current. Minimizing the lattice defects in 2D semiconductors represents a common strategy to improve their electronic properties, but has met with limited success to date. Herein, a hidden benefit of the atomic vacancies in monolayer 2D semiconductors to push their performance limit is reported. By purposely tailoring the sulfur vacancies (SVs) to an optimum density of 4.7% in monolayer MoS2, an unusual mobility enhancement is obtained and a record‐high carrier mobility (>115 cm2 V−1 s−1) is achieved, realizing monolayer MoS2 transistors with an exceptional current density (>0.60 mA µm−1) and a record‐high on/off ratio >1010, and enabling a logic inverter with an ultrahigh voltage gain >100. The systematic transport studies reveal that the counterintuitive vacancy‐enhanced transport originates from a nearest‐neighbor hopping conduction model, in which an optimum SV density is essential for maximizing the charge hopping probability. Lastly, the vacancy benefit into other monolayer 2D semiconductors is further generalized; thus, a general strategy for tailoring the charge transport properties of monolayer materials is defined.
Atomic‐Thin ZnO Sheet for Visible‐Blind Ultraviolet Photodetection
The atomic‐thin 2D semiconductors have emerged as plausible candidates for future optoelectronics with higher performance in terms of the scaling process. However, currently reported 2D photodetectors still have huge shortcomings in ultraviolet and especially visible‐blind wavelengths. Here, a simple and nontoxic surfactant‐assisted synthesis strategy is reported for the controllable growth of atomically thin (1.5 to 4 nm) ZnO nanosheets with size ranging from 3 to 30 µm. Benefit from the short carbon chains and the water‐soluble ability of sodium dodecyl sulfate (SDS), the synthesized ZnO nanosheets possess high crystal quality and clean surface, leading to good compatibility with traditional micromanufacturing technology and high sensitivity to UV light. The photodetectors constructed with ZnO demonstrate the highest responsivity (up to 2.0 × 104 A W−1) and detectivity (D* = 6.83 × 1014 Jones) at a visible‐blind wavelength of 254 nm, and the photoresponse speed is optimized by the 400 °C annealing treatment (τR = 3.97 s, τD = 5.32 s), thus the 2D ZnO can serve as a promising material to fill in the gap for deep‐UV photodetection. The method developed here opens a new avenue to controllably synthesize 2D nonlayered materials and accelerates their applications in high‐performance optoelectronic devices.
Atomic‐Thin ZnO Sheet for Visible‐Blind Ultraviolet Photodetection
The atomic‐thin 2D semiconductors have emerged as plausible candidates for future optoelectronics with higher performance in terms of the scaling process. However, currently reported 2D photodetectors still have huge shortcomings in ultraviolet and especially visible‐blind wavelengths. Here, a simple and nontoxic surfactant‐assisted synthesis strategy is reported for the controllable growth of atomically thin (1.5 to 4 nm) ZnO nanosheets with size ranging from 3 to 30 µm. Benefit from the short carbon chains and the water‐soluble ability of sodium dodecyl sulfate (SDS), the synthesized ZnO nanosheets possess high crystal quality and clean surface, leading to good compatibility with traditional micromanufacturing technology and high sensitivity to UV light. The photodetectors constructed with ZnO demonstrate the highest responsivity (up to 2.0 × 104 A W−1) and detectivity (D* = 6.83 × 1014 Jones) at a visible‐blind wavelength of 254 nm, and the photoresponse speed is optimized by the 400 °C annealing treatment (τR = 3.97 s, τD = 5.32 s), thus the 2D ZnO can serve as a promising material to fill in the gap for deep‐UV photodetection. The method developed here opens a new avenue to controllably synthesize 2D nonlayered materials and accelerates their applications in high‐performance optoelectronic devices.
- 1 April 2019
- Published by Elsevier in Nano Energy
- Vol. 58, 85-93
Piezotronic effect on interfacial charge modulation in mixed-dimensional Van der Waals heterostructure for ultrasensitive flexible photodetectors
- 1 April 2019
- Published by Elsevier in Nano Energy
- Vol. 58, 85-93
Piezotronic effect on interfacial charge modulation in mixed-dimensional Van der Waals heterostructure for ultrasensitive flexible photodetectors
- Open Access
- 22 June 2017
- Published by Springer Nature in Nature Communications
- Vol. 8 (1) , 15881
Poly(4-styrenesulfonate)-induced sulfur vacancy self-healing strategy for monolayer MoS2 homojunction photodiode
We establish a powerful poly(4-styrenesulfonate) (PSS)-treated strategy for sulfur vacancy healing in monolayer MoS2 to precisely and steadily tune its electronic state. The self-healing mechanism, in which the sulfur vacancies are healed spontaneously by the sulfur adatom clusters on the MoS2 surface through a PSS-induced hydrogenation process, is proposed and demonstrated systematically. The electron concentration of the self-healed MoS2 dramatically decreased by 643 times, leading to a work function enhancement of ∼150 meV. This strategy is employed to fabricate a high performance lateral monolayer MoS2 homojunction which presents a perfect rectifying behaviour, excellent photoresponsivity of ∼308 mA W−1 and outstanding air-stability after two months. Unlike previous chemical doping, the lattice defect-induced local fields are eliminated during the process of the sulfur vacancy self-healing to largely improve the homojunction performance. Our findings demonstrate a promising and facile strategy in 2D material electronic state modulation for the development of next-generation electronics and optoelectronics.
- 22 June 2017
- Published by Springer Nature in Nature Communications
- Vol. 8 (1) , 15881
Open AccessPoly(4-styrenesulfonate)-induced sulfur vacancy self-healing strategy for monolayer MoS2 homojunction photodiode
We establish a powerful poly(4-styrenesulfonate) (PSS)-treated strategy for sulfur vacancy healing in monolayer MoS2 to precisely and steadily tune its electronic state. The self-healing mechanism, in which the sulfur vacancies are healed spontaneously by the sulfur adatom clusters on the MoS2 surface through a PSS-induced hydrogenation process, is proposed and demonstrated systematically. The electron concentration of the self-healed MoS2 dramatically decreased by 643 times, leading to a work function enhancement of ∼150 meV. This strategy is employed to fabricate a high performance lateral monolayer MoS2 homojunction which presents a perfect rectifying behaviour, excellent photoresponsivity of ∼308 mA W−1 and outstanding air-stability after two months. Unlike previous chemical doping, the lattice defect-induced local fields are eliminated during the process of the sulfur vacancy self-healing to largely improve the homojunction performance. Our findings demonstrate a promising and facile strategy in 2D material electronic state modulation for the development of next-generation electronics and optoelectronics.