Gang Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Gang Wang has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
- Yanguang Yang
National Key Laboratory of Aerospace Physics in Fluids, Mianyang 621000, China
6 shared publications - Hongyu Wang
Hypervelocity Aerodynamics Institute, China Aerodynamics Research and Development Center, Mianyang, China
4 shared publications Feng Xie
2 shared publicationsKe Zhu
2 shared publications- Wenqiang Guo
National Key Laboratory of Aerospace Physics in Fluids, Mianyang 621000, China
2 shared publications - Xiao-Hua Fan2 shared publications
Latest Publications
- Open Access
- 30 September 2026
- Published by Elsevier in SSRN Electronic Journal
Direct Numerical Simulation of Supersonic Film Cooling Enhanced by Herringbone Micro-Riblets Combined with Discrete-Hole Jets
Film cooling is widely used for thermal protection of supersonic vehicles, yet its cooling effectiveness is limited by the mixing between the coolant and the mainstream. This paper presents a film-cooling enhancement strategy that combines herringbone micro-riblets with discrete-hole jets, in which the jet holes are positioned at the divergent line (DL) of the riblet structure to exploit the large-scale counter-rotating vortex pair induced by the riblets, thereby enhancing both the wall-attachment and the spanwise coverage of the coolant. High-fidelity direct numerical simulation (DNS) is performed for both the isolated-jet and the combined-control configurations under a Mach 3 freestream with sonic jets. The vortex structure and its strength evolution, the spanwise coherent structures, and the wall Stanton-number distribution are comparatively analyzed. The results show that the downwash induced by the riblet at the divergent line promotes the transport of high-momentum outer fluid toward the wall and enhances coolant attachment; in the jet-riblet interaction region the riblet suppresses the upwash of the isolated-jet counter-rotating vortex pair (CVP) while notably strengthening its downwash, and the spanwise-diffusion cooling band induced at the riblet tail markedly extends the spanwise coverage of the coolant. Compared with the isolated jet, the combined control increases the area-averaged non-dimensional heat-transfer intensity (absolute Stanton number) by about 23.7%, and this enhancement persists over the downstream region. The proposed strategy has a low geometrical profile and is expected to incur a limited aerodynamic penalty, offering physical insight and data support for the design of film-cooling structures for high-speed vehicles.
- 30 September 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessDirect Numerical Simulation of Supersonic Film Cooling Enhanced by Herringbone Micro-Riblets Combined with Discrete-Hole Jets
Film cooling is widely used for thermal protection of supersonic vehicles, yet its cooling effectiveness is limited by the mixing between the coolant and the mainstream. This paper presents a film-cooling enhancement strategy that combines herringbone micro-riblets with discrete-hole jets, in which the jet holes are positioned at the divergent line (DL) of the riblet structure to exploit the large-scale counter-rotating vortex pair induced by the riblets, thereby enhancing both the wall-attachment and the spanwise coverage of the coolant. High-fidelity direct numerical simulation (DNS) is performed for both the isolated-jet and the combined-control configurations under a Mach 3 freestream with sonic jets. The vortex structure and its strength evolution, the spanwise coherent structures, and the wall Stanton-number distribution are comparatively analyzed. The results show that the downwash induced by the riblet at the divergent line promotes the transport of high-momentum outer fluid toward the wall and enhances coolant attachment; in the jet-riblet interaction region the riblet suppresses the upwash of the isolated-jet counter-rotating vortex pair (CVP) while notably strengthening its downwash, and the spanwise-diffusion cooling band induced at the riblet tail markedly extends the spanwise coverage of the coolant. Compared with the isolated jet, the combined control increases the area-averaged non-dimensional heat-transfer intensity (absolute Stanton number) by about 23.7%, and this enhancement persists over the downstream region. The proposed strategy has a low geometrical profile and is expected to incur a limited aerodynamic penalty, offering physical insight and data support for the design of film-cooling structures for high-speed vehicles.
- Open Access
- 22 July 2025
- Published by Elsevier in Chinese Journal of Aeronautics
- Vol. 38 (9)
CFD-DEM approaches for simulating dense gas–solid reacting flows: Progress and perspectives
- 22 July 2025
- Published by Elsevier in Chinese Journal of Aeronautics
- Vol. 38 (9)
Open AccessCFD-DEM approaches for simulating dense gas–solid reacting flows: Progress and perspectives
- Open Access
Effect of Pore-Scale Anisotropic and Heterogeneous Structure on Rarefied Gas Flow in Three-Dimensional Porous Media
Porous media have great application prospects, such as transpiration cooling for the aerospace industry. The main challenge for the prediction of gas permeability includes the geometrical complexity and high Knudsen number of gas flow at the nano-scale to micro-scale, leading to failure of the conventional Darcy’s law. To address these issues, the Quartet Structure Generation Set (QSGS) method is improved to construct anisotropic and heterogeneous three-dimensional porous media, and the lattice Boltzmann method (LBM) with the multiple relaxation time (MRT) collision operator is adopted. Using MRT-LBM, the pressure boundary conditions at the inlet and outlet are firstly dealt with using the moment-based boundary conditions, demonstrating good agreement with the analytical solutions in two benchmark tests of three-dimensional Poiseuille flow and flow through a body-centered cubic array of spheres. Combined with the Bosanquet-type effective viscosity model and Maxwellian diffuse reflection boundary condition, the gas flow at high Knudsen (Kn) numbers in three-dimensional porous media is simulated to study the relationship between pore-scale anisotropy, heterogeneity and Kn, and permeability and micro-scale slip effects in porous media. The slip factor is positively correlated with the anisotropic factor, which means that the high Kn effect is stronger in anisotropic structures. There is no obvious correlation between the slip factor and heterogeneity factor.
Open AccessEffect of Pore-Scale Anisotropic and Heterogeneous Structure on Rarefied Gas Flow in Three-Dimensional Porous Media
Porous media have great application prospects, such as transpiration cooling for the aerospace industry. The main challenge for the prediction of gas permeability includes the geometrical complexity and high Knudsen number of gas flow at the nano-scale to micro-scale, leading to failure of the conventional Darcy’s law. To address these issues, the Quartet Structure Generation Set (QSGS) method is improved to construct anisotropic and heterogeneous three-dimensional porous media, and the lattice Boltzmann method (LBM) with the multiple relaxation time (MRT) collision operator is adopted. Using MRT-LBM, the pressure boundary conditions at the inlet and outlet are firstly dealt with using the moment-based boundary conditions, demonstrating good agreement with the analytical solutions in two benchmark tests of three-dimensional Poiseuille flow and flow through a body-centered cubic array of spheres. Combined with the Bosanquet-type effective viscosity model and Maxwellian diffuse reflection boundary condition, the gas flow at high Knudsen (Kn) numbers in three-dimensional porous media is simulated to study the relationship between pore-scale anisotropy, heterogeneity and Kn, and permeability and micro-scale slip effects in porous media. The slip factor is positively correlated with the anisotropic factor, which means that the high Kn effect is stronger in anisotropic structures. There is no obvious correlation between the slip factor and heterogeneity factor.
- Open Access
Local-Energy-Conservation-Based Decomposition Method for Wall Friction and Heat Flux
A novel decomposition method that adheres to both local time translation symmetry and spatial rotational symmetry is proposed in this study, thereby extending the limitations of existing methods, which are typically restricted to quasi-two-dimensional configurations. Grounded in the FIK and RD identities, this method provides a clear physical and reliable interpretation suitable for arbitrary-curvature profiles. Utilizing this method, an analysis of the aerothermodynamic characteristics of the bistable states of curved compression ramp flows was conducted. The results reveal that the generation of undisturbed and peak is dominated by viscous dissipation. Specifically, flow separation happens when all of the energy input from the work exerted by the adverse pressure gradient (APG) is insufficient to be entirely converted into local viscous dissipation and kinetic energy. Furthermore, the propensity for flow separation at higher wall temperatures is firstly elucidated quantitatively from the perspective of the work by the APG. The peak heat flux is predominantly triggered by the work of viscous stress, with the secondary contribution from energy transport playing a more significant role in the generation of the peak heat flux of the separation state than that of the attachment state.Open AccessLocal-Energy-Conservation-Based Decomposition Method for Wall Friction and Heat Flux
A novel decomposition method that adheres to both local time translation symmetry and spatial rotational symmetry is proposed in this study, thereby extending the limitations of existing methods, which are typically restricted to quasi-two-dimensional configurations. Grounded in the FIK and RD identities, this method provides a clear physical and reliable interpretation suitable for arbitrary-curvature profiles. Utilizing this method, an analysis of the aerothermodynamic characteristics of the bistable states of curved compression ramp flows was conducted. The results reveal that the generation of undisturbed and peak is dominated by viscous dissipation. Specifically, flow separation happens when all of the energy input from the work exerted by the adverse pressure gradient (APG) is insufficient to be entirely converted into local viscous dissipation and kinetic energy. Furthermore, the propensity for flow separation at higher wall temperatures is firstly elucidated quantitatively from the perspective of the work by the APG. The peak heat flux is predominantly triggered by the work of viscous stress, with the secondary contribution from energy transport playing a more significant role in the generation of the peak heat flux of the separation state than that of the attachment state. - Open Access
Predicting Wall Pressure in Shock Wave/Boundary Layer Interactions with Convolutional Neural Networks
Within the dynamic realm of variable-geometry shock wave/boundary layer interactions, the wall parameters of the flow field undergo real-time fluctuations. The conventional approach to sensing these changes in wall pressure through sensor measurements is encumbered by a cumbersome process, leading to diminished efficiency and an inability to provide swift predictions of wall parameters. This paper introduces a data-driven methodology that leverages non-contact schlieren imaging to predict wall pressure within the flow field, a technique that holds promise for informing the optimized design of variable-geometry systems. A sophisticated deep learning framework, predicated on Convolutional Neural Networks (CNN), has been engineered to anticipate alterations in wall pressure stemming from high-speed shock wave/boundary layer interactions. Utilizing an impulsive wind tunnel with a Mach number of 6, we have procured a sequence of schlieren images and corresponding wall pressure measurements, capturing the continuous variations induced by an attack angle from a shock wave generator. These data have been instrumental in compiling a comprehensive dataset for the training and evaluation of the CNN. The CNN model, once trained, has adeptly deduced the distribution of wall pressure from the schlieren imagery. Notwithstanding, it was observed that the CNN’s predictive prowess is marginally diminished in regions where pressure variations are most pronounced. To assess the model’s generalization capabilities, we have segmented the dataset according to different temporal intervals for network training. Our findings indicate that while the generalization of all models crafted was less than optimal, Model 4 demonstrated superior generalization. It is thus suggested that augmenting the training set with additional samples and refining the network architecture will be a worthwhile endeavor in subsequent research initiatives.
Open AccessPredicting Wall Pressure in Shock Wave/Boundary Layer Interactions with Convolutional Neural Networks
Within the dynamic realm of variable-geometry shock wave/boundary layer interactions, the wall parameters of the flow field undergo real-time fluctuations. The conventional approach to sensing these changes in wall pressure through sensor measurements is encumbered by a cumbersome process, leading to diminished efficiency and an inability to provide swift predictions of wall parameters. This paper introduces a data-driven methodology that leverages non-contact schlieren imaging to predict wall pressure within the flow field, a technique that holds promise for informing the optimized design of variable-geometry systems. A sophisticated deep learning framework, predicated on Convolutional Neural Networks (CNN), has been engineered to anticipate alterations in wall pressure stemming from high-speed shock wave/boundary layer interactions. Utilizing an impulsive wind tunnel with a Mach number of 6, we have procured a sequence of schlieren images and corresponding wall pressure measurements, capturing the continuous variations induced by an attack angle from a shock wave generator. These data have been instrumental in compiling a comprehensive dataset for the training and evaluation of the CNN. The CNN model, once trained, has adeptly deduced the distribution of wall pressure from the schlieren imagery. Notwithstanding, it was observed that the CNN’s predictive prowess is marginally diminished in regions where pressure variations are most pronounced. To assess the model’s generalization capabilities, we have segmented the dataset according to different temporal intervals for network training. Our findings indicate that while the generalization of all models crafted was less than optimal, Model 4 demonstrated superior generalization. It is thus suggested that augmenting the training set with additional samples and refining the network architecture will be a worthwhile endeavor in subsequent research initiatives.
- 1 April 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (4)
Experimental study on control of transverse jet mixing by arrayed plasma energy deposition
The efficient and prompt mixing of fuel is crucial in the operation of scramjet engines. This paper presents the findings from wind tunnel experiments that examined the influence of plasma energy deposition on transverse jets at a Mach number of 6.13. The study took into account various inlet flow total pressures and momentum flux ratios between the jet and the main flow. Utilizing a database containing time-resolved intensities from instantaneous schlieren images, we perform turbulence analysis employing various techniques such as the root mean square, fast Fourier transform, proper orthogonal decomposition, and the two-point correlation method. Specifically, we aim to compare and analyze the pulsation characteristics and spatial self-organization of the jet flow field, both with and without energy deposition control. The findings reveal that intermittent “hot bubbles” created by plasma energy deposition interact with the bow shock induced by the jet, resulting in the formation of an array of large-scale vortices. These vortices emerge as the dominant structures within the jet, effectively amplifying its pulsations. At low inlet flow pressures, energy deposition primarily disrupts the jet, causing large-scale vortices to propagate primarily within the jet plume region. However, at high inlet flow pressures, the impact of energy deposition extends to both the jet and the turbulent boundary layer, encompassing their respective disturbance ranges. Increasing the inlet flow pressure constraints the evolution of large-scale vortices, thus limiting the efficacy of energy deposition in governing the mixing process.
- 1 April 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (4)
Experimental study on control of transverse jet mixing by arrayed plasma energy deposition
The efficient and prompt mixing of fuel is crucial in the operation of scramjet engines. This paper presents the findings from wind tunnel experiments that examined the influence of plasma energy deposition on transverse jets at a Mach number of 6.13. The study took into account various inlet flow total pressures and momentum flux ratios between the jet and the main flow. Utilizing a database containing time-resolved intensities from instantaneous schlieren images, we perform turbulence analysis employing various techniques such as the root mean square, fast Fourier transform, proper orthogonal decomposition, and the two-point correlation method. Specifically, we aim to compare and analyze the pulsation characteristics and spatial self-organization of the jet flow field, both with and without energy deposition control. The findings reveal that intermittent “hot bubbles” created by plasma energy deposition interact with the bow shock induced by the jet, resulting in the formation of an array of large-scale vortices. These vortices emerge as the dominant structures within the jet, effectively amplifying its pulsations. At low inlet flow pressures, energy deposition primarily disrupts the jet, causing large-scale vortices to propagate primarily within the jet plume region. However, at high inlet flow pressures, the impact of energy deposition extends to both the jet and the turbulent boundary layer, encompassing their respective disturbance ranges. Increasing the inlet flow pressure constraints the evolution of large-scale vortices, thus limiting the efficacy of energy deposition in governing the mixing process.
- 13 February 2024
- Published by American Physical Society (APS) in Physical Review E
- Vol. 109 (2) , 025103
Experimental and numerical investigation of three-dimensional shock train topology with differently oriented background waves
To better understand the three-dimensional topology of the interaction between the shock train and the background wave, the steady and dynamic characteristics of a shock train were investigated using wind-tunnel experiments and numerical simulation. A 14° wedge placed at the bottom and sidewalls was used to generate background waves traveling in different directions. Mounting the wedge on the bottom wall at an incoming Mach number of 1.85 leads to the formation of two symmetric and two asymmetric λ-shaped shock train leading shocks (STLSs), while an incoming Mach number of 2.70 results in one symmetric and two asymmetric X-shaped STLSs. The shock train, which runs perpendicular to the background wave, is always symmetrical at an incoming Mach number of 1.85 when the wedge is mounted on the lateral wall. A flow phenomenon in which the STLS transforms from asymmetric to symmetric after undergoing rapid movement is observed at an incoming Mach number of 2.70. The mean and root-mean-square (rms) pressure profiles confirm the morphological transformation of the STLS. The dynamic properties of the shock train are analyzed by combining the STLS trajectory with the transient wall pressure. Power spectral-density analysis reveals that the frequency of pressure oscillations is independent of whether the shock train is in the same flow cross section as the background wave and depends only on the incoming Mach number and the backpressure. The three-dimensional steady-state numerical simulation reveals the mutual interference structure of the background wave and shock train.
- 13 February 2024
- Published by American Physical Society (APS) in Physical Review E
- Vol. 109 (2) , 025103
Experimental and numerical investigation of three-dimensional shock train topology with differently oriented background waves
To better understand the three-dimensional topology of the interaction between the shock train and the background wave, the steady and dynamic characteristics of a shock train were investigated using wind-tunnel experiments and numerical simulation. A 14° wedge placed at the bottom and sidewalls was used to generate background waves traveling in different directions. Mounting the wedge on the bottom wall at an incoming Mach number of 1.85 leads to the formation of two symmetric and two asymmetric λ-shaped shock train leading shocks (STLSs), while an incoming Mach number of 2.70 results in one symmetric and two asymmetric X-shaped STLSs. The shock train, which runs perpendicular to the background wave, is always symmetrical at an incoming Mach number of 1.85 when the wedge is mounted on the lateral wall. A flow phenomenon in which the STLS transforms from asymmetric to symmetric after undergoing rapid movement is observed at an incoming Mach number of 2.70. The mean and root-mean-square (rms) pressure profiles confirm the morphological transformation of the STLS. The dynamic properties of the shock train are analyzed by combining the STLS trajectory with the transient wall pressure. Power spectral-density analysis reveals that the frequency of pressure oscillations is independent of whether the shock train is in the same flow cross section as the background wave and depends only on the incoming Mach number and the backpressure. The three-dimensional steady-state numerical simulation reveals the mutual interference structure of the background wave and shock train.
- Open Access
- 1 October 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (10)
Erratum: “Effects of expansion waves on incident shock-wave/boundary-layer interactions in hypersonic flows” [Phys. Fluids 35, 056121 (2023)]
In our originally published paper,1 Eq. (3.1) should read P − P e q e = F ( s ) 2 C f o ( M a 2 − 1 ) 1 / 2 (3.1)and Eq. (3.5) should read S e * = k Δ P q e = 2
- 1 October 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (10)
Open AccessErratum: “Effects of expansion waves on incident shock-wave/boundary-layer interactions in hypersonic flows” [Phys. Fluids 35, 056121 (2023)]
In our originally published paper,1 Eq. (3.1) should read P − P e q e = F ( s ) 2 C f o ( M a 2 − 1 ) 1 / 2 (3.1)and Eq. (3.5) should read S e * = k Δ P q e = 2
- Open Access
- 1 September 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (9)
Mechanism of a transverse jet mixing enhanced by high-frequency plasma energy deposition
The mixing mechanism of a transverse jet enhanced by high-frequency plasma energy deposition is investigated at Ma = 6.13 using both experimental measurements and improved delayed detached eddy simulation. The test configuration is a flat plate with argon gas injected vertically at its center. The plasma actuator driven by 20 and 50 kHz pulsed discharge is used as a mixing enhancement device, which is located upstream of the jet. The schlieren and planar laser scattering visualization show that the interaction between the hot bubbles induced by the plasma energy deposition and the bow shock caused by the jet generates large scale vortices that diffuse the jet components, and improve the penetration depth of the jet. These large-scale vortices augment the vorticity and turbulence intensity, thus enhancing the jet component mixing. The vortex analysis indicated that the jet vorticity increases due to the stronger baroclinic torque induced by Richtmyer–Meshkov (R–M) instability around the bubble/shock interaction region, which promotes the turbulent kinetic energy and the production of the large-scale vortex structures. The baroclinic torque and the resulting large-scale vortices are the physical origin of the enhanced mixing of the transverse jet.
- 1 September 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (9)
Open AccessMechanism of a transverse jet mixing enhanced by high-frequency plasma energy deposition
The mixing mechanism of a transverse jet enhanced by high-frequency plasma energy deposition is investigated at Ma = 6.13 using both experimental measurements and improved delayed detached eddy simulation. The test configuration is a flat plate with argon gas injected vertically at its center. The plasma actuator driven by 20 and 50 kHz pulsed discharge is used as a mixing enhancement device, which is located upstream of the jet. The schlieren and planar laser scattering visualization show that the interaction between the hot bubbles induced by the plasma energy deposition and the bow shock caused by the jet generates large scale vortices that diffuse the jet components, and improve the penetration depth of the jet. These large-scale vortices augment the vorticity and turbulence intensity, thus enhancing the jet component mixing. The vortex analysis indicated that the jet vorticity increases due to the stronger baroclinic torque induced by Richtmyer–Meshkov (R–M) instability around the bubble/shock interaction region, which promotes the turbulent kinetic energy and the production of the large-scale vortex structures. The baroclinic torque and the resulting large-scale vortices are the physical origin of the enhanced mixing of the transverse jet.