KAKiana Amini

Kiana Amini

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Kiana Amini has a total of 63 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Bismuth Electrode Utilization in Chloride-Mediated Electrochemical Carbon Capture

    by Omer Shinnawy, Alicia Theresse Dumlao, Kiana Amini

    Bismuth/bismuth oxychloride (Bi/BiOCl) is a promising proton-coupled electron transfer (PCET) electrode for electrochemical carbon capture, but its performance is strongly influenced by poorly understood operational conditions. In this work, we examined the effects of electrochemical pretreatment, electrolyte composition, and regeneration on the performance of the Bi/BiOCl electrode. We find that commercial bismuth surfaces are covered by a native oxide layer that increases polarization and limits access to active metallic sites, and that electrochemical pretreatment is required to activate the electrode. Chloride-containing electrolytes enable stable and reversible Bi/BiOCl cycling, while chloride concentration influences PCET capacity utilization. We further show that electrochemical regeneration can reverse air-induced passivation and recover the initial electrode activity. Finally, we bring these operational insights together in a flow-cell demonstration under simulated flue-gas conditions, showing that Bi/BiOCl electrodes can sustain repeatable pH swings of 5.0–8.5 and achieve a carbon capture capacity of 63 μmol, corresponding to 92% of the theoretical maximum. These results establish operational requirements for Bi/BiOCl electrodes and provide design guidelines for their use in electrochemical carbon capture systems.

  • Open Access

    Electrochemical Flow-Assisted Lithium Extraction from Canadian Oilfield Brine

    by Vrisha Nilesh Vyas, Xinge Zhang, Kiana Amini

    Effective utilization of lithium-bearing oilfield brines could expand domestic critical-mineral supply. Here, we report the first demonstration of electrochemical lithium extraction from a real Canadian oilfield brine in a symmetric flow cell equipped with lithium manganese oxide (LMO) electrodes. Despite a low Li+ concentration of 0.009 M, a Na+/Li+ ratio of approximately 200, and substantial concentrations of K+, Mg2+, and Ca2+, the system extracted approximately 73% of the lithium per cycle and achieved an overall recovery efficiency of 75%. Separation coefficients of 2166, 547, 1615, and 1196 were obtained for Li+ over Na+, K+, Mg2+, and Ca2+, respectively. The system achieved a lithium insertion capacity of 12.04 mg Li g-1 LMO and an energy consumption of 20.91 Wh mol-1 Li. Mechanistic analysis revealed that oxygen evolution, electrolyte acidification, and manganese dissolution limited electrode stability. A Pourbaix-guided constantcurrent/constant-voltage protocol reduced manganese dissolution and improved Faradaic efficiency by restricting the half-cell potentials. Increasing the operating temperature from 20 to 70 °C decreased the Faradaic efficiency from 53% to 41% and intensified electrolyte acidification and manganese dissolution. These results demonstrate the feasibility of selective lithium recovery from Canadian oilfield brines and establish electrode-potential control and temperature management as key requirements for stable operation.

  • Open Access

    A Highly Stable, Minimally Functionalized Anthraquinone for Aqueous Redox Flow Batteries

    by Jayson S. Garcia, Brigitta Kinara, Mara Waynick, Emily Kerr, Kiana Amini

    Aqueous organic redox flow batteries (AORFBs) require redox-active materials that combine high electrochemical stability with low molecular weight, synthetic simplicity, and scalable availability. Here, 15 commercially available dyes and dye-related intermediates were screened based on their aqueous solubility and electrochemical behavior, identifying 2-hydroxyanthraquinone (2HAQ) as a promising redox species. With a molecular weight of 224.21 g mol-1 and a single hydroxyl substituent, 2HAQ is, to the best of our knowledge, the lowest-molecular-weight and least functionalized anthraquinone evaluated in a flow battery to date. At pH 14, 2HAQ exhibited a measured solubility of at least 0.58 M, corresponding to more than 1.0 M transferable electrons, and a permeability of 1.12 × 10-12 cm2 s-1 through Nafion 212. Full cells paired with a ferri/ferrocyanide posolyte demonstrated stable room-temperature cycling at concentrations of up to 0.3 M, corresponding to 0.6 M electron equivalents, with temporal capacity-fade rates of 0.02-0.07% per day. Post-cycling characterization, symmetric-cell cycling, permeability measurements, and electrochemical recomposition experiments indicate that neither crossover nor disproportionation dominates the observed capacity loss. These results establish 2HAQ as a durable and readily accessible redox species and demonstrate that extensive molecular functionalization is not necessarily required to achieve long-term stability in AORFBs.

  • Open Access

    Dual-function electrochemical cell for simultaneous carbon capture and lithium extraction from saline waters

    by Omer Shinnawy, Seyyed Arman Hejazi, Kiana Amini

    This work demonstrates the first dual-function electrochemical system enabling simultaneous CO 2 capture and lithium extraction from saline waters within a single integrated platform.

  • Open Access

    Dual-Function Electrochemical Cell for Simultaneous Carbon Capture and Lithium Extraction from Saline Waters

    by Omer Shinnawy, Seyyed Arman Hejazi, Kiana Amini

    Effective utilization of saline waters as a large reservoir of both dissolved inorganic carbon (DIC) and lithium would simultaneously support carbon mitigation and secure critical mineral supply. Here, we report the first demonstration of a dual-function electrochemical system capable of coupling CO2 capture and Li⁺ extraction from saline waters. Using a pH-swing architecture with bismuth and LiFePO₄ electrodes, we achieve stable pH cycling between 8.1 and 4.7 in 2.1 mM DIC, while extracting lithium at concentrations down to 0.17 ppm Li⁺ (seawater levels). Under impurity-free conditions, the system maintains 80% bismuth utilization and 50% lithium utilization, with attractive energetic costs of 128 kJ mol⁻¹ CO2 and 121 kJ mol⁻¹ Li, comparable to state-of-the-art stand-alone electrochemical systems. By integrating Li⁺ and CO2 extraction using shared pumping, membrane, and reactor infrastructure, this system offers a compelling path toward co-production of critical materials and integrated CO2 capture using a single seawater-processing platform.

  • Solubility Challenges in Battery Electrolytes

    by David Reber, Zhiyu Wang, Kiana Amini, Yan Jing, Julia Lorenzetti, Kang Xu, Abhishek Khetan, Qing Wang

    This review provides a foundational understanding of solubility to support researchers in navigating challenges in battery electrolyte development. We survey recent strategies aimed at controlling, and typically maximizing, solubility in electrochemical systems, with a focus on redox flow and metal-ion batteries. The review begins with an accessible overview of solubility concepts, methods for accurately determining solubility for battery-relevant materials, and solubility prediction. We then discuss how solubility can be tuned by modifying the electrolyte solution structure or by tailoring the molecular structure of the active material itself, and we examine emerging strategies to decouple electrolyte capacity from solubility in flow batteries. In the context of metal and metal-ion batteries, we highlight the role of solvation structures in concentrated electrolytes and their influence on both bulk and interfacial properties. Finally, trade-offs associated with high-concentration formulations, such as increased viscosity and reduced ionic conductivity, are considered in light of their impact on practical deployment. We conclude with a forward-looking perspective on solubility as a central design parameter in battery electrolyte research.


  • Open Access

    Reduced Flow Battery Capacity Fade from Mixed Redox-Active Organics Beyond the Rule of Mixtures

    by Kyumin Lee, Kiana Amini, Michael Aziz

    Aqueous redox flow batteries using organic molecules offer a sustainable solution for long-duration energy storage, but their commercialization is challenged by capacity fade from molecular degradation. Here, we introduce a mixed-electrolyte strategy that enhances the stability of 2,6-dihydroxyanthraquinone (DHAQ) by enabling continuous in situ regeneration of redox-active species under standard operating conditions. By incorporating 0.1 M 4,4′-((9,10-anthraquinone-2,6-diyl)dioxy)dibutyrate (DBEAQ) into a 0.1 M DHAQ electrolyte, the capacity fade rate is reduced from 4.7% to 0.9% per day, representing a 62% decrease with respect to the value of 2.35%/day expected from the rule of mixtures for a non-interacting mixture. Increasing the DBEAQ concentration to 0.2 M further decreases the fade rate to 0.43% per day, representing a 73% reduction relative to the expected value of 1.57%. Electrochemical and NMR analyses reveal that regeneration occurs via a two-step process: chemical oxidation of anthrone to its dimer, followed by electrochemical oxidation of the dimer back to DHAQ. This regeneration pathway is made possible by the mixed-electrolyte system, which shifts the concentration balance between DHA and dimer toward dimer formation, as DBEAQ acts as an oxidant due to its more positive redox potential. We demonstrate that this mixed-electrolyte strategy is not limited to DBEAQ, highlighting its broader applicability across the anthraquinone species. Moreover, the underlying regeneration mechanism may be extended to other anthraquinone derivatives that degrade through similar pathways, offering a promising framework to enhance electrolyte longevity and stability in organic redox flow batteries.

  • Open Access

    Print‐and‐Plate Architected Electrodes for Electrochemical Transformations Under Flow

    by Dylan M. Barber, Sofía Edgar, Michael S. Emanuel, Michael D. Nelwood, Bok Yeop Ahn, Benito Román‐Manso, Thomas Cochard, Justin Platero, Kiana Amini, Chris H. Rycroft, et al.

    Flow cell electrodes are typically composed of porous carbon materials, such as papers, felts, and cloths. However, their random architecture hinders the fundamental characterization of electrode structure‐performance relationships during in situ operation of porous electrochemical flow systems. This work describes a “print‐and‐plate” method that combines direct ink writing of micro‐periodic lattices with a two‐step metal plating process that converts them into highly conductive (sheet resistance 40 mΩ sq −1 ) electrodes. Their operando performance is assessed in an anthraquinone disulfonic acid half‐cell using widefield electrochemical fluorescence microscopy, where output current and fluorescence intensity are in excellent agreement. The pressure drop associated with flow through three electrode designs is determined via simulations from which the most efficient design is identified and manufactured via print‐and‐plate. Confocal fluorescence microscopy is then used to create a 3D map of the state of charge (SOC) inside this print‐and‐plate electrode. The experimental state of the charge map is in good agreement with computational predictions. The rapid design, simulation, and fabrication of print‐and‐plate electrodes enable fundamental investigations of how architected porosity affects electrochemical performance under flow.