Xiangbei Qi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Xiangbei Qi has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
Dehao Fu
The Third Hospital of Hebei Medical University
3 shared publicationsXiaoyu Shen
The Third Hospital of Hebei Medical University
3 shared publicationsHui Sun
Department of Orthopaedic Surgery, the Third Hospital of HeBei Medical University, Shijiazhuang, China
2 shared publicationsJianchao Chen
The Third Hospital of Hebei Medical University
2 shared publicationsJianning Liu
Department of Orthopaedic Surgery, the Third Hospital of HeBei Medical University, Shijiazhuang, China
2 shared publicationsLi Zhang
Department of Orthopaedic Surgery, The Third Hospital of Hebei Medical University, Shijiazhuang, People’s Republic of China
2 shared publications
Latest Publications
- Open Access
- 11 September 2023
- Published by Springer Nature in Research Square
The role of Notch signaling pathway in bone immune regulation of osteogenic differentiation of macrophages and mesenchymal stem cells
Backgroud:During various stages of fracture healing, macrophages control mesenchymal stem cells' (BMSCs') proliferative behavior and osteogenic differentiation through varying polarization states. BMSCs also regulate their own osteogenic differentiation through the polarization state of macrophages to meet the requirements of tissue repair and osteogenic environment. A crucial role in cell proliferation, differentiation, and death is played by the evolutionarily conserved Notch signaling system. It also plays an important role in the osteogenic differentiation and regulation of macrophage polarization of BMSCs. The NOTCH signaling pathway typically plays a role in information exchange through direct contact between cells. Therefore, the Notch signaling pathway is involved in information exchange during direct contact between macrophages and BMSCs. Methods: A co culture system of mouse monocytic megacytic leukemia cell line (RAW264.7) and BMSC was established. RAW264.7 cells in logarithmic growth phase were divided into M0 group (unpolarized) and M1 group (LPS+INF γ induction), M2 group (IL4+IL13 induction), polarization status was detected by flow cytometry, and then BMSC were added to detect the Notch signaling pathway and the expression levels of RUNX2 gene and protein at different time points in each group. To further validate the role of the NOTCH signaling pathway in osteogenesis, we chose to apply the NOTCH signaling blocker RO4929097 to the co culture system of M2 and BMSC.According to whether blockers were used or not, they were divided into control group, M2 group, M2+blocker group, and blocker group. The transmission of the NOTCH signaling pathway in the interaction between M2 and BMSC as well as the production of Hes1 linked to the osteogenic gene RUNX2 were observed by blocking the NOTCH signaling pathway's conduction. At the same time, we detected the polarization of RAW264.7 cells in Mo and M1 groups to determine whether there was a change in the polarization state of RAW264.7 cells after the addition of BMSC. Results:PCR and WB results showed that the NOTCH signaling pathway and osteogenic specific RUNX2 related protein and gene expression were basically synchronized: the expression of Jagged1 and Notch1 in M2 group was higher than that in M0 and M1 groups (pConclusion: In the co culture system of macrophages and BMSC,the Notch signaling pathway promotes macrophage polarization towards M2 type, thereby regulating the osteogenic differentiation of BMSC and participating in the bone immune regulation of macrophages and mesenchymal stem cells.
- 11 September 2023
- Published by Springer Nature in Research Square
Open AccessThe role of Notch signaling pathway in bone immune regulation of osteogenic differentiation of macrophages and mesenchymal stem cells
Backgroud:During various stages of fracture healing, macrophages control mesenchymal stem cells' (BMSCs') proliferative behavior and osteogenic differentiation through varying polarization states. BMSCs also regulate their own osteogenic differentiation through the polarization state of macrophages to meet the requirements of tissue repair and osteogenic environment. A crucial role in cell proliferation, differentiation, and death is played by the evolutionarily conserved Notch signaling system. It also plays an important role in the osteogenic differentiation and regulation of macrophage polarization of BMSCs. The NOTCH signaling pathway typically plays a role in information exchange through direct contact between cells. Therefore, the Notch signaling pathway is involved in information exchange during direct contact between macrophages and BMSCs. Methods: A co culture system of mouse monocytic megacytic leukemia cell line (RAW264.7) and BMSC was established. RAW264.7 cells in logarithmic growth phase were divided into M0 group (unpolarized) and M1 group (LPS+INF γ induction), M2 group (IL4+IL13 induction), polarization status was detected by flow cytometry, and then BMSC were added to detect the Notch signaling pathway and the expression levels of RUNX2 gene and protein at different time points in each group. To further validate the role of the NOTCH signaling pathway in osteogenesis, we chose to apply the NOTCH signaling blocker RO4929097 to the co culture system of M2 and BMSC.According to whether blockers were used or not, they were divided into control group, M2 group, M2+blocker group, and blocker group. The transmission of the NOTCH signaling pathway in the interaction between M2 and BMSC as well as the production of Hes1 linked to the osteogenic gene RUNX2 were observed by blocking the NOTCH signaling pathway's conduction. At the same time, we detected the polarization of RAW264.7 cells in Mo and M1 groups to determine whether there was a change in the polarization state of RAW264.7 cells after the addition of BMSC. Results:PCR and WB results showed that the NOTCH signaling pathway and osteogenic specific RUNX2 related protein and gene expression were basically synchronized: the expression of Jagged1 and Notch1 in M2 group was higher than that in M0 and M1 groups (pConclusion: In the co culture system of macrophages and BMSC,the Notch signaling pathway promotes macrophage polarization towards M2 type, thereby regulating the osteogenic differentiation of BMSC and participating in the bone immune regulation of macrophages and mesenchymal stem cells.
- Open Access
- 27 July 2023
- Published by Springer Nature in Research Square
TiRobot-assisted channel screw fixation for elderly patients with fragility fractures of the pelvis: A retrospective study
Objective The incidence of fragility fracture of the pelvis (FFP) in the elderly population is increasing, and FFP that require fixation are a challenge for orthopedic surgeons. The aim of the study was to investigate the clinical efficacy of TiRobot-assisted channel screws fixation in the treatment of elderly FFP patients. Method Between May 2020 and September 2022, 46 elderly FFP patients were separately treated using channel screws fixation assisted by the TiRobot (TiRobot-assisted group) and conventional freehand surgery (freehand group). Postoperative outcomes between groups, including excellent and good fracture reduction based on Matta criteria and screw implantation accuracy based on Gras criteria, were compared. Changes in the Visual Analog Scale (VAS) pain score and the Majeed score (reflecting functional recovery) were recorded and compared between groups before and after surgery and during the 24-week of follow-up. Results A total of 90 screws were placed in all patients. Fifty-one screws were implanted in the TiRobot-assisted group (24 patients) and 39 screws (22 patients) in the freehand group. There were no screw-related complications or revision surgery in any group. The Matta value of TiRobot-assisted group was 5.13 ± 3.52, which was significantly lower than that of freehand group (9.00 ± 3.68); the excellent and good rate of the former (91.67%) was significantly higher than that of the latter (72.73%), and the differences were statistically significant (p = 0.0007; p < 0.001). In terms of screw placement, the accuracy rate was 100% in the TiRobot-assisted group, better than that in the freehand group where it was only 85.7% (p < 0.001). At each time point in the early postoperative period, the VAS score of the TiRobot-assisted group was significantly lower than that of the freehand group (all p < 0.05), and was close to consistent by the last follow-up. While the Majeed score of the former was significantly higher than that of the latter at each time point of follow-up; the difference between the two groups was statistically significant (all p < 0.0001). Conclusion TiRobot-assisted channel screw fixation of elderly FFP patients is advantageous over conventional freehand surgery, with less invasion, more precise positioning, more accurate screw placement, better fracture reduction, early pain relief and rapid recovery, suggesting that it is a better method to stabilize FFP in the elderly population.
- 27 July 2023
- Published by Springer Nature in Research Square
Open AccessTiRobot-assisted channel screw fixation for elderly patients with fragility fractures of the pelvis: A retrospective study
Objective The incidence of fragility fracture of the pelvis (FFP) in the elderly population is increasing, and FFP that require fixation are a challenge for orthopedic surgeons. The aim of the study was to investigate the clinical efficacy of TiRobot-assisted channel screws fixation in the treatment of elderly FFP patients. Method Between May 2020 and September 2022, 46 elderly FFP patients were separately treated using channel screws fixation assisted by the TiRobot (TiRobot-assisted group) and conventional freehand surgery (freehand group). Postoperative outcomes between groups, including excellent and good fracture reduction based on Matta criteria and screw implantation accuracy based on Gras criteria, were compared. Changes in the Visual Analog Scale (VAS) pain score and the Majeed score (reflecting functional recovery) were recorded and compared between groups before and after surgery and during the 24-week of follow-up. Results A total of 90 screws were placed in all patients. Fifty-one screws were implanted in the TiRobot-assisted group (24 patients) and 39 screws (22 patients) in the freehand group. There were no screw-related complications or revision surgery in any group. The Matta value of TiRobot-assisted group was 5.13 ± 3.52, which was significantly lower than that of freehand group (9.00 ± 3.68); the excellent and good rate of the former (91.67%) was significantly higher than that of the latter (72.73%), and the differences were statistically significant (p = 0.0007; p < 0.001). In terms of screw placement, the accuracy rate was 100% in the TiRobot-assisted group, better than that in the freehand group where it was only 85.7% (p < 0.001). At each time point in the early postoperative period, the VAS score of the TiRobot-assisted group was significantly lower than that of the freehand group (all p < 0.05), and was close to consistent by the last follow-up. While the Majeed score of the former was significantly higher than that of the latter at each time point of follow-up; the difference between the two groups was statistically significant (all p < 0.0001). Conclusion TiRobot-assisted channel screw fixation of elderly FFP patients is advantageous over conventional freehand surgery, with less invasion, more precise positioning, more accurate screw placement, better fracture reduction, early pain relief and rapid recovery, suggesting that it is a better method to stabilize FFP in the elderly population.
- Open Access
- 23 May 2023
- Published by Springer Nature in Journal of Orthopaedic Surgery and Research
- Vol. 18 (1) , 1-15
Enoxaparin sodium bone cement plays an anti-inflammatory immunomodulatory role by inducing the polarization of M2 macrophages
Objective: The implantation of PMMA bone cement results in an immune response and the release of PMMA bone cement particles causes an inflammatory cascade. Our study discovered that ES-PMMA bone cement can induce M2 polarization of macrophages, which has an anti-inflammatory immunomodulatory effect. We also delved into the molecular mechanisms that underlie this process. Methods: In this study, we designed and prepared samples of bone cement. These included PMMA bone cement samples and ES-PMMA bone cement samples, which were implanted into the back muscles of rats. At 3, 7, and 14 days after the operation, we removed the bone cement and a small amount of surrounding tissue. We then performed immunohistochemistry and immunofluorescence to observe the polarization of macrophages and the expression of related inflammatory factors in the surrounding tissues. The RAW264.7 cells were exposed to lipopolysaccharide (LPS) for 24 h to establish the macrophage inflammation model. Then, each group was treated with enoxaparin sodium medium, PMMA bone cement extract medium, and ES-PMMA bone cement extract medium, respectively, and cultured for another 24 h. We collected cells from each group and used flow cytometry to detect the expressions of CD86 and CD206 in macrophages. Additionally, we performed RT-qPCR to determine the mRNA levels of three markers of M1 macrophages (TNF-α, IL-6, iNOS) and two M2 macrophage markers (Arg-1, IL-10). Furthermore, we analyzed the expression of TLR4, p-NF-κB p65, and NF-κB p65 through Western blotting. Results: The immunofluorescence results indicate that the ES-PMMA group exhibited an upregulation of CD206, an M2 marker, and a downregulation of CD86, an M1 marker, in comparison to the PMMA group. Additionally, the immunohistochemistry results revealed that the levels of IL-6 and TNF-α expression were lower in the ES-PMMA group than in the PMMA group, while the expression level of IL-10 was higher in the ES-PMMA group. Flow cytometry and RT-qPCR analyses revealed that the expression of M1-type macrophage marker CD86 was significantly elevated in the LPS group compared to the NC group. Additionally, M1-type macrophage-related cytokines TNF-α, IL-6, and iNOS were also found to be increased. However, in the LPS + ES group, the expression levels of CD86, TNF-α, IL-6, and iNOS were decreased, while the expression of M2-type macrophage markers CD206 and M2-type macrophage-related cytokines (IL-10, Arg-1) were increased compared to the LPS group. In comparison to the LPS + PMMA group, the LPS + ES-PMMA group demonstrated a down-regulation of CD86, TNF-α, IL-6, and iNOS expression levels, while increasing the expression levels of CD206, IL-10, and Arg-1. Western blotting results revealed a significant decrease in TLR4/GAPDH and p-NF-κB p65/NF-κB p65 in the LPS + ES group when compared to the LPS group. Additionally, the LPS + ES-PMMA group exhibited a decrease in TLR4/GAPDH and p-NF-κB p65/NF-κB p65 levels when compared to the LPS + PMMA group. Conclusion: ES-PMMA bone cement is more effective than PMMA bone cement in down-regulating the expression of the TLR4/NF-κB signaling pathway. Additionally, it induces macrophages to polarize towards the M2 phenotype, making it a crucial player in anti-inflammatory immune regulation. Graphical
- 23 May 2023
- Published by Springer Nature in Journal of Orthopaedic Surgery and Research
- Vol. 18 (1) , 1-15
Open AccessEnoxaparin sodium bone cement plays an anti-inflammatory immunomodulatory role by inducing the polarization of M2 macrophages
Objective: The implantation of PMMA bone cement results in an immune response and the release of PMMA bone cement particles causes an inflammatory cascade. Our study discovered that ES-PMMA bone cement can induce M2 polarization of macrophages, which has an anti-inflammatory immunomodulatory effect. We also delved into the molecular mechanisms that underlie this process. Methods: In this study, we designed and prepared samples of bone cement. These included PMMA bone cement samples and ES-PMMA bone cement samples, which were implanted into the back muscles of rats. At 3, 7, and 14 days after the operation, we removed the bone cement and a small amount of surrounding tissue. We then performed immunohistochemistry and immunofluorescence to observe the polarization of macrophages and the expression of related inflammatory factors in the surrounding tissues. The RAW264.7 cells were exposed to lipopolysaccharide (LPS) for 24 h to establish the macrophage inflammation model. Then, each group was treated with enoxaparin sodium medium, PMMA bone cement extract medium, and ES-PMMA bone cement extract medium, respectively, and cultured for another 24 h. We collected cells from each group and used flow cytometry to detect the expressions of CD86 and CD206 in macrophages. Additionally, we performed RT-qPCR to determine the mRNA levels of three markers of M1 macrophages (TNF-α, IL-6, iNOS) and two M2 macrophage markers (Arg-1, IL-10). Furthermore, we analyzed the expression of TLR4, p-NF-κB p65, and NF-κB p65 through Western blotting. Results: The immunofluorescence results indicate that the ES-PMMA group exhibited an upregulation of CD206, an M2 marker, and a downregulation of CD86, an M1 marker, in comparison to the PMMA group. Additionally, the immunohistochemistry results revealed that the levels of IL-6 and TNF-α expression were lower in the ES-PMMA group than in the PMMA group, while the expression level of IL-10 was higher in the ES-PMMA group. Flow cytometry and RT-qPCR analyses revealed that the expression of M1-type macrophage marker CD86 was significantly elevated in the LPS group compared to the NC group. Additionally, M1-type macrophage-related cytokines TNF-α, IL-6, and iNOS were also found to be increased. However, in the LPS + ES group, the expression levels of CD86, TNF-α, IL-6, and iNOS were decreased, while the expression of M2-type macrophage markers CD206 and M2-type macrophage-related cytokines (IL-10, Arg-1) were increased compared to the LPS group. In comparison to the LPS + PMMA group, the LPS + ES-PMMA group demonstrated a down-regulation of CD86, TNF-α, IL-6, and iNOS expression levels, while increasing the expression levels of CD206, IL-10, and Arg-1. Western blotting results revealed a significant decrease in TLR4/GAPDH and p-NF-κB p65/NF-κB p65 in the LPS + ES group when compared to the LPS group. Additionally, the LPS + ES-PMMA group exhibited a decrease in TLR4/GAPDH and p-NF-κB p65/NF-κB p65 levels when compared to the LPS + PMMA group. Conclusion: ES-PMMA bone cement is more effective than PMMA bone cement in down-regulating the expression of the TLR4/NF-κB signaling pathway. Additionally, it induces macrophages to polarize towards the M2 phenotype, making it a crucial player in anti-inflammatory immune regulation. Graphical
- Open Access
- 29 September 2022
- Published by Springer Nature in Journal of Orthopaedic Surgery and Research
- Vol. 17 (1) , 1-12
Bone healing study of alendronate combined with enoxaparin sodium bone cement in rabbits with bone defects
Background: To observe the effect of enoxaparin sodium-polymethyl methacrylate (ES-PMMA) bone cement supplemented with alendronate (AN) on bone repair of bone defects in New Zealand rabbits. Methods: Twenty-seven New Zealand rabbits were randomly divided into ES/AN, ES-PMMA and PMMA groups, with a total of 27 New Zealand rabbits. The drugs loaded in 40 g bone cement powder were as follows: ES/AN group 8000 AxaIU enoxaparin (ES) and 200 mg alendronate (AN), ES-PMMA group 8000 AxaIU enoxaparin (ES), PMMA group without drugs. A bone defect model with a length of 10 mm and a diameter of 5 mm was made from the left tibia of rabbits, and the prepared bone cement was placed in the tibia defect. At 4 weeks, 8 weeks and 12 weeks after the operation, 3 rabbits in each group were sacrificed, and left tibia samples were collected for histological scoring, HE staining and Masson staining. Bone mineral density and new bone volume were measured by imaging, and the related data were processed by one-way ANOVA and least significance difference (LSD) post hoc test. Results: (1) Bone mineral density (BMD, mg/mm3) around the bone defect: at the 4th week, BMD in the ES/AN group was higher than that in the PMMA group; at the 8th week, the BMD in the ES/AN group was significantly higher than that in the other two groups; and at the 12th week, the BMD in the ES/AN group was significantly higher than that in the other two groups. (2) New bone volume (BV, mm3): at the 4th week, BV in the ES/AN group was significantly higher than that in the other two groups, BV in the ES/AN group was significantly higher than that in the other two groups at the 8th and 12th weeks, and BV in the ES-PMMA group was higher than that in the PMMA group. (3) Histological score: at the 4th and 8th weeks, the histological score of the ES/AN group was higher than that of the PMMA group, and at the 12th week, the histological score of the ES/AN group was higher than that of the other two groups. (4) Cortical bone thickness (μm): at the 4th, 8th and 12th weeks, the cortical bone thickness in the ES/AN group was higher than that in the other two groups, and the cortical bone thickness in the ES-PMMA group was higher than that in the PMMA group. (5) The percentage of mature area of new bone in the ES/AN group was higher than that in the other two groups at the 4th week, and at the 8th and 12th weeks, the percentage of mature area of new bone in the ES/AN group and ES-PMMA group was significantly higher than that in the PMMA group. Conclusion: (1) Enoxaparin sodium bone cement supplemented with alendronate was superior to enoxaparin sodium bone cement and PMMA bone cement in promoting bone repair of tibial bone defects in New Zealand rabbits. (2) Enoxaparin sodium bone cement is superior to PMMA bone cement in promoting bone repair, showing a certain osteogenic potential.
- 29 September 2022
- Published by Springer Nature in Journal of Orthopaedic Surgery and Research
- Vol. 17 (1) , 1-12
Open AccessBone healing study of alendronate combined with enoxaparin sodium bone cement in rabbits with bone defects
Background: To observe the effect of enoxaparin sodium-polymethyl methacrylate (ES-PMMA) bone cement supplemented with alendronate (AN) on bone repair of bone defects in New Zealand rabbits. Methods: Twenty-seven New Zealand rabbits were randomly divided into ES/AN, ES-PMMA and PMMA groups, with a total of 27 New Zealand rabbits. The drugs loaded in 40 g bone cement powder were as follows: ES/AN group 8000 AxaIU enoxaparin (ES) and 200 mg alendronate (AN), ES-PMMA group 8000 AxaIU enoxaparin (ES), PMMA group without drugs. A bone defect model with a length of 10 mm and a diameter of 5 mm was made from the left tibia of rabbits, and the prepared bone cement was placed in the tibia defect. At 4 weeks, 8 weeks and 12 weeks after the operation, 3 rabbits in each group were sacrificed, and left tibia samples were collected for histological scoring, HE staining and Masson staining. Bone mineral density and new bone volume were measured by imaging, and the related data were processed by one-way ANOVA and least significance difference (LSD) post hoc test. Results: (1) Bone mineral density (BMD, mg/mm3) around the bone defect: at the 4th week, BMD in the ES/AN group was higher than that in the PMMA group; at the 8th week, the BMD in the ES/AN group was significantly higher than that in the other two groups; and at the 12th week, the BMD in the ES/AN group was significantly higher than that in the other two groups. (2) New bone volume (BV, mm3): at the 4th week, BV in the ES/AN group was significantly higher than that in the other two groups, BV in the ES/AN group was significantly higher than that in the other two groups at the 8th and 12th weeks, and BV in the ES-PMMA group was higher than that in the PMMA group. (3) Histological score: at the 4th and 8th weeks, the histological score of the ES/AN group was higher than that of the PMMA group, and at the 12th week, the histological score of the ES/AN group was higher than that of the other two groups. (4) Cortical bone thickness (μm): at the 4th, 8th and 12th weeks, the cortical bone thickness in the ES/AN group was higher than that in the other two groups, and the cortical bone thickness in the ES-PMMA group was higher than that in the PMMA group. (5) The percentage of mature area of new bone in the ES/AN group was higher than that in the other two groups at the 4th week, and at the 8th and 12th weeks, the percentage of mature area of new bone in the ES/AN group and ES-PMMA group was significantly higher than that in the PMMA group. Conclusion: (1) Enoxaparin sodium bone cement supplemented with alendronate was superior to enoxaparin sodium bone cement and PMMA bone cement in promoting bone repair of tibial bone defects in New Zealand rabbits. (2) Enoxaparin sodium bone cement is superior to PMMA bone cement in promoting bone repair, showing a certain osteogenic potential.
- 30 July 2022
- Published by Springer Nature in Archives of orthopaedic and trauma surgery
- Vol. 143 (6) , 3163-3172
Lateral locking plate plus antero-posterior lag screws techniques for the management of posterolateral tibial plateau fracture: preliminary clinical results and biomechanical study
Introduction To date, there is no consensus on the optimal surgical strategy for the treatment of posterolateral tibial plateau fracture (PLF). This study introduced a novel, simple technique for treating PLF with a lateral locking plate plus antero-posterior lag screws (LPpLS). Methods We conducted a retrospective case series of 42 patients (Female/Male 19/23) with PLF treated with LPpLS between 1 July 2016 and 30 June 2019. Several pre- and postoperative outcomes were recorded, including operative time, intraoperative blood loss, CT findings, HSS, and ROM. For biomechanical studies, seventy synthetic tibiae with a simulated posterolateral split fracture were divided into seven groups. The biomechanical evaluation included displacement measurement at axial compression and fatigue testing. Results Forty-two eligible patients were followed up for an average of 18 months (range 14–21 months). Postoperative radiographs and CT showed good positioning of plates and screws, no fracture fragment loss, and normal articular surfaces in all 42 cases. The biomechanical study showed that the axial stiffness of LPpLS was in the same fashion as the posterior buttress plate and better than the other fixation methods (P < 0.05). Additionally, the LPpLS group had a smaller displacement of fracture fragments along the X-axis (medial to lateral direction) than the BP group (P < 0.01). Conclusions The LPpLS technique could implement good reconstruction of the PLF, showing satisfactory therapeutic effect. The biomechanical evaluation demonstrated that the LPpLS had better stability in three-dimensional directions for PLF than other fixation strategies.
- 30 July 2022
- Published by Springer Nature in Archives of orthopaedic and trauma surgery
- Vol. 143 (6) , 3163-3172
Lateral locking plate plus antero-posterior lag screws techniques for the management of posterolateral tibial plateau fracture: preliminary clinical results and biomechanical study
Introduction To date, there is no consensus on the optimal surgical strategy for the treatment of posterolateral tibial plateau fracture (PLF). This study introduced a novel, simple technique for treating PLF with a lateral locking plate plus antero-posterior lag screws (LPpLS). Methods We conducted a retrospective case series of 42 patients (Female/Male 19/23) with PLF treated with LPpLS between 1 July 2016 and 30 June 2019. Several pre- and postoperative outcomes were recorded, including operative time, intraoperative blood loss, CT findings, HSS, and ROM. For biomechanical studies, seventy synthetic tibiae with a simulated posterolateral split fracture were divided into seven groups. The biomechanical evaluation included displacement measurement at axial compression and fatigue testing. Results Forty-two eligible patients were followed up for an average of 18 months (range 14–21 months). Postoperative radiographs and CT showed good positioning of plates and screws, no fracture fragment loss, and normal articular surfaces in all 42 cases. The biomechanical study showed that the axial stiffness of LPpLS was in the same fashion as the posterior buttress plate and better than the other fixation methods (P < 0.05). Additionally, the LPpLS group had a smaller displacement of fracture fragments along the X-axis (medial to lateral direction) than the BP group (P < 0.01). Conclusions The LPpLS technique could implement good reconstruction of the PLF, showing satisfactory therapeutic effect. The biomechanical evaluation demonstrated that the LPpLS had better stability in three-dimensional directions for PLF than other fixation strategies.
- 1 January 2022
- Published by Turkish Neurosurgical Society in Turkish Neurosurgery
- Vol. 32 (6) , 883-892
Cement leakage in vertebral compression fractures between unilateral and bilateral percutaneous vertebral augmentation: a meta-analysis
AIM: To compare the incidences of cement leakage between unilateral and bilateral percutaneous vertebral augmentation (PVA) in the treatment of osteoporosis vertebral compression fractures, a meta-analysis was performed.MATERIAL and METHODS: Pertinent studies were identified by a search of the PubMed, Embase, and Web of Science databases up to December 2020. The risk ratio (RR) or weighted mean difference (WMD) was applied to combine the results, and a random -effects or a fixed-effects model was used to pool the results depending on the heterogeneity among studies. Publication bias was estimated using Egger's regression asymmetry test.RESULTS: A total of 16 trials (including 9 randomized controlled trials and 7 cohort studies) met the inclusion criteria and were included in this meta-analysis. The incidences of cement leakage were similar between the bilateral PVA and unilateral PVA groups (RR=0.80, 95%CI: 0.57, 1.11; p=0.182) but unilateral PVA required less cement volume (WMD=-1.34 ml, 95%CI: -1.87, -0.81; p<0.001). Subgroup analysis revealed that the incidence of cement leakage was significantly lower in the unilateral PKP group than in the bilateral PKP group (RR=0.65, 95%CI: 0.44, 0.97; p=0.034). CONCLUSION: The incidences of cement leakage were similar between unilateral and bilateral PVA, but unilateral PVA required less cement. More large-scale studies are needed to verify our findings.
- 1 January 2022
- Published by Turkish Neurosurgical Society in Turkish Neurosurgery
- Vol. 32 (6) , 883-892
Cement leakage in vertebral compression fractures between unilateral and bilateral percutaneous vertebral augmentation: a meta-analysis
AIM: To compare the incidences of cement leakage between unilateral and bilateral percutaneous vertebral augmentation (PVA) in the treatment of osteoporosis vertebral compression fractures, a meta-analysis was performed.MATERIAL and METHODS: Pertinent studies were identified by a search of the PubMed, Embase, and Web of Science databases up to December 2020. The risk ratio (RR) or weighted mean difference (WMD) was applied to combine the results, and a random -effects or a fixed-effects model was used to pool the results depending on the heterogeneity among studies. Publication bias was estimated using Egger's regression asymmetry test.RESULTS: A total of 16 trials (including 9 randomized controlled trials and 7 cohort studies) met the inclusion criteria and were included in this meta-analysis. The incidences of cement leakage were similar between the bilateral PVA and unilateral PVA groups (RR=0.80, 95%CI: 0.57, 1.11; p=0.182) but unilateral PVA required less cement volume (WMD=-1.34 ml, 95%CI: -1.87, -0.81; p<0.001). Subgroup analysis revealed that the incidence of cement leakage was significantly lower in the unilateral PKP group than in the bilateral PKP group (RR=0.65, 95%CI: 0.44, 0.97; p=0.034). CONCLUSION: The incidences of cement leakage were similar between unilateral and bilateral PVA, but unilateral PVA required less cement. More large-scale studies are needed to verify our findings.
- Open Access
- 4 February 2021
- Published by Springer Nature in Journal of Orthopaedic Surgery and Research
- Vol. 16 (1) , 1-11
Release characteristics of enoxaparin sodium-loaded polymethylmethacrylate bone cement
Background: This study aimed to prepare the polymethylmethacrylate (PMMA) bone cement release system with different concentrations of enoxaparin sodium (ES) and to investigate the release characteristics of ES after loading into the PMMA bone cement. Methods: In the experimental group, 40 g Palacos®R PMMA bone cement was loaded with various amount of ES 4000, 8000, 12,000, 16,000, 20,000, and 24,000 AXaIU, respectively. The control group was not loaded with ES. Scanning electron microscopy (SEM) was used to observe the surface microstructure of the bone cement in the two groups. In the experiment group, the mold was extracted continuously with pH7.4 Tris-HCL buffer for 10 days. The extract solution was collected every day and the anti-FXa potency was measured. The experiment design and statistical analysis were conducted using a quantitative response parallel line method. Results: Under the SEM, it was observed that ES was filled in the pores of PMMA bone cement polymer structure and released from the pores after extraction. There was a burst effect of the release. The release amount of ES on the first day was 0.415, 0.858, 1.110, 1.564, 1.952, and 2.513, respectively, from the six groups with various ES loading amount of 4000, 8000, 12,000, 16,000, 20,000, and 24,000 AXaIU, all reaching the peak of release on the first day. The release decreased rapidly on the next day and entered the plateau phase on the fourth day. Conclusion: The prepared ES-PMMA bone cement has high application potential in orthopedic surgery. ES-PMMA bone cement shows good drug release characteristics. The released enoxaparin sodium has a local anti-coagulant effect within 24 h after application, but it will not be released for a long time, which is complementary to postoperative anti-coagulation therapy.
- 4 February 2021
- Published by Springer Nature in Journal of Orthopaedic Surgery and Research
- Vol. 16 (1) , 1-11
Open AccessRelease characteristics of enoxaparin sodium-loaded polymethylmethacrylate bone cement
Background: This study aimed to prepare the polymethylmethacrylate (PMMA) bone cement release system with different concentrations of enoxaparin sodium (ES) and to investigate the release characteristics of ES after loading into the PMMA bone cement. Methods: In the experimental group, 40 g Palacos®R PMMA bone cement was loaded with various amount of ES 4000, 8000, 12,000, 16,000, 20,000, and 24,000 AXaIU, respectively. The control group was not loaded with ES. Scanning electron microscopy (SEM) was used to observe the surface microstructure of the bone cement in the two groups. In the experiment group, the mold was extracted continuously with pH7.4 Tris-HCL buffer for 10 days. The extract solution was collected every day and the anti-FXa potency was measured. The experiment design and statistical analysis were conducted using a quantitative response parallel line method. Results: Under the SEM, it was observed that ES was filled in the pores of PMMA bone cement polymer structure and released from the pores after extraction. There was a burst effect of the release. The release amount of ES on the first day was 0.415, 0.858, 1.110, 1.564, 1.952, and 2.513, respectively, from the six groups with various ES loading amount of 4000, 8000, 12,000, 16,000, 20,000, and 24,000 AXaIU, all reaching the peak of release on the first day. The release decreased rapidly on the next day and entered the plateau phase on the fourth day. Conclusion: The prepared ES-PMMA bone cement has high application potential in orthopedic surgery. ES-PMMA bone cement shows good drug release characteristics. The released enoxaparin sodium has a local anti-coagulant effect within 24 h after application, but it will not be released for a long time, which is complementary to postoperative anti-coagulation therapy.
- Open Access
- 5 November 2020
- Published by Springer Nature in Research Square
Release Characteristics of Enoxaparin Sodium Loaded Polymethylmethacrylate Bone Cement
Background: This study aimed to prepare the polymethylmethacrylate (PMMA) bone cement release system with different concentrations of enoxaparin sodium (ES) and to investigate the release characteristics of ES after loading into the PMMA bone cement. Methods: In the experimental group, 40g Palacos®R PMMA bone cement was loaded with various amount of ES 4000, 8000, 12000, 16000, 20000, and 24000 AXaIU, respectively. The control group was not loaded with ES. Scanning electron microscopy (SEM) was used to observe the surface microstructure of the bone cement in the two groups. In the experiment group, the mold was extracted continuously with pH7.4 Tris-HCL buffer for 10 days. The extract solution was collected every day and the anti-FXa potency was measured. The experiment design and statistical analysis were conducted using a quantitative response parallel line method. Results: Under the SEM, it was observed that ES was filled in the pores of PMMA bone cement polymer structure and released from the pores after extraction. There was a burst effect of the release. The release amount of ES on the first day was 0.415, 0.858, 1.110, 1.564, 1.952 and 2.513 respectively from the six groups with various ES loading amount of 4000, 8000, 12000, 16000, 20000 and 24000 AXaIU, all reaching the peak of release on the first day. The release decreased rapidly on the next day and entered the plateau phase on the fourth day. Conclusion: PMMA bone cement can be used as a carrier to effectively release enoxaparin sodium within a short term.
- 5 November 2020
- Published by Springer Nature in Research Square
Open AccessRelease Characteristics of Enoxaparin Sodium Loaded Polymethylmethacrylate Bone Cement
Background: This study aimed to prepare the polymethylmethacrylate (PMMA) bone cement release system with different concentrations of enoxaparin sodium (ES) and to investigate the release characteristics of ES after loading into the PMMA bone cement. Methods: In the experimental group, 40g Palacos®R PMMA bone cement was loaded with various amount of ES 4000, 8000, 12000, 16000, 20000, and 24000 AXaIU, respectively. The control group was not loaded with ES. Scanning electron microscopy (SEM) was used to observe the surface microstructure of the bone cement in the two groups. In the experiment group, the mold was extracted continuously with pH7.4 Tris-HCL buffer for 10 days. The extract solution was collected every day and the anti-FXa potency was measured. The experiment design and statistical analysis were conducted using a quantitative response parallel line method. Results: Under the SEM, it was observed that ES was filled in the pores of PMMA bone cement polymer structure and released from the pores after extraction. There was a burst effect of the release. The release amount of ES on the first day was 0.415, 0.858, 1.110, 1.564, 1.952 and 2.513 respectively from the six groups with various ES loading amount of 4000, 8000, 12000, 16000, 20000 and 24000 AXaIU, all reaching the peak of release on the first day. The release decreased rapidly on the next day and entered the plateau phase on the fourth day. Conclusion: PMMA bone cement can be used as a carrier to effectively release enoxaparin sodium within a short term.