Pavel Kudryavtsev
Pavel Kudryavtsev has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
N.P. Kudryavtsev
Polymate Ltd, Israel Nanotechnol Res Ctr, POB 73, IL-2320001 Migdal Haemeq, Israel
3 shared publicationsO.L. Figovsky
52 Golomb Street, POB 305 Holon 5810201, Израиль, 23100
3 shared publications- Oleg L Figovsky
Polymate Ltd
3 shared publications Michael Zilberman
Vice president R&D Xtra-Lit Co Rehovot Israel
1 shared publicationNikolai Kudryavtsev
Polymate Ltd -Israel Research Center, P.O. Box 73, Migdal HaEmek 10550, Israel
1 shared publicationOleg Figovsky
Polymate Ltd -Israel Research Center, P.O. Box 73, Migdal HaEmek 10550, Israel
1 shared publication
Latest Publications
- Open Access
- 25 May 2023
- Published by MedCrave Group Kft. in International Journal of Hydrology
- Vol. 7 (3) , 91-117
Kinetics of ion exchange on inorganic sorbents
In recent years, the problems associated with water use have sharply escalated worldwide. One of the main methods used for these purposes is ion exchange. In turn, the most promising ion-exchange materials are inorganic ion exchangers - substances with exceptionally high selectivity concerning ions of certain elements. In connection with life, it is necessary to understand ion exchange mechanisms on inorganic ion exchangers since they have significant differences in the unit vector of classical ion exchange resins. A theoretical analysis was conducted, which made it possible to reveal some features of the sorption kinetics of inorganic ion exchange materials. It has been found that when working in the region of concave isotherms, a significant slowdown of the mass transfer process is possible even on very sorbent granulates. This effect is associated with reversing sorption processes involving highly selective sorbents. In this regard, difficulties can be encountered when using displacement desorption, which is associated with maintaining high concentrations of the displacing agent and the low rate of the ion exchange process. The rate of sorption on inorganic ion exchange materials depends in a certain way on the concentration of sorbed ions in an external solution. This dependence manifests itself even in the absence of external diffusion inhibition. In this case, the determining factor is the distribution of electrolytes between the pore space of the granule and the free volume of the solution. The rate of mass transfer processes with the participation of inorganic sorbents can be affected not only by the permeability of granulates but also by inhibition at the level of homogeneous sections of the solid phase. The simplest way to detect such deceleration is to compare the data of the kinetic experiment with the theoretical results related to the model that ignores deceleration at the level of homogeneous sections of the solid phase. In such a comparison, it is necessary to consider possible distortions due to the finite width of particle size fractions, the discrepancy between the particle shape and the calculated one, etc.
- 25 May 2023
- Published by MedCrave Group Kft. in International Journal of Hydrology
- Vol. 7 (3) , 91-117
Open AccessKinetics of ion exchange on inorganic sorbents
In recent years, the problems associated with water use have sharply escalated worldwide. One of the main methods used for these purposes is ion exchange. In turn, the most promising ion-exchange materials are inorganic ion exchangers - substances with exceptionally high selectivity concerning ions of certain elements. In connection with life, it is necessary to understand ion exchange mechanisms on inorganic ion exchangers since they have significant differences in the unit vector of classical ion exchange resins. A theoretical analysis was conducted, which made it possible to reveal some features of the sorption kinetics of inorganic ion exchange materials. It has been found that when working in the region of concave isotherms, a significant slowdown of the mass transfer process is possible even on very sorbent granulates. This effect is associated with reversing sorption processes involving highly selective sorbents. In this regard, difficulties can be encountered when using displacement desorption, which is associated with maintaining high concentrations of the displacing agent and the low rate of the ion exchange process. The rate of sorption on inorganic ion exchange materials depends in a certain way on the concentration of sorbed ions in an external solution. This dependence manifests itself even in the absence of external diffusion inhibition. In this case, the determining factor is the distribution of electrolytes between the pore space of the granule and the free volume of the solution. The rate of mass transfer processes with the participation of inorganic sorbents can be affected not only by the permeability of granulates but also by inhibition at the level of homogeneous sections of the solid phase. The simplest way to detect such deceleration is to compare the data of the kinetic experiment with the theoretical results related to the model that ignores deceleration at the level of homogeneous sections of the solid phase. In such a comparison, it is necessary to consider possible distortions due to the finite width of particle size fractions, the discrepancy between the particle shape and the calculated one, etc.
- 30 October 2020
- Published by CNT Nanostroitelstvo in Nanotechnologies in Construction: A Scientific Internet-Journal
- Vol. 12 (5) , 256-269
Main routes of the porous composite materials creation
This paper is devoted to an overview of the main ways of creating porous composite materials. Porous materials are solids containing free space in the form of cavities, channels, or pores, which determine the presence of an internal interfacial surface. The analysis of the general methods of obtaining porous materials. A deposition is one of the most common methods for producing porous materials. Thermal decomposition, as a method used to obtain porous oxide materials by thermal decomposition of various compounds. Hydrothermal synthesis is widely used to produce zeolites. Selective dissolution of individual components of a substance using chemical reactions is also one of the effective methods for creating or increasing porosity. The paper discusses the methods of forming highly porous refractory materials. There are two main ways of forming refractory ceramic products. The first way is the direct sintering of dispersions of ceramic fibers. The second method is the use of a binder, which can significantly reduce the temperature of obtaining a porous product. The possibilities of obtaining porous nanocomposites based on aerogels are shown. Composite materials are usually obtained by combining two different materials. In general, the creation of composites is used to take advantage of each type of material and to minimize their disadvantages. Aerogels are fragile substances. But with the introduction of another component into their structure, it is possible to increase the strength of the material. Such materials have the desired optical properties, high surface area, and low density like silica aerogel. A review of methods for obtaining porous materials using the phenomenon of spinodal decomposition has been carried out. Materials whose structure is formed in microphase separation during polymerization or polycondensation have high permeability and a sufficiently large specific surface. A significant advantage of such materials is high porosity, which can reach 80% or more
- 30 October 2020
- Published by CNT Nanostroitelstvo in Nanotechnologies in Construction: A Scientific Internet-Journal
- Vol. 12 (5) , 256-269
Main routes of the porous composite materials creation
This paper is devoted to an overview of the main ways of creating porous composite materials. Porous materials are solids containing free space in the form of cavities, channels, or pores, which determine the presence of an internal interfacial surface. The analysis of the general methods of obtaining porous materials. A deposition is one of the most common methods for producing porous materials. Thermal decomposition, as a method used to obtain porous oxide materials by thermal decomposition of various compounds. Hydrothermal synthesis is widely used to produce zeolites. Selective dissolution of individual components of a substance using chemical reactions is also one of the effective methods for creating or increasing porosity. The paper discusses the methods of forming highly porous refractory materials. There are two main ways of forming refractory ceramic products. The first way is the direct sintering of dispersions of ceramic fibers. The second method is the use of a binder, which can significantly reduce the temperature of obtaining a porous product. The possibilities of obtaining porous nanocomposites based on aerogels are shown. Composite materials are usually obtained by combining two different materials. In general, the creation of composites is used to take advantage of each type of material and to minimize their disadvantages. Aerogels are fragile substances. But with the introduction of another component into their structure, it is possible to increase the strength of the material. Such materials have the desired optical properties, high surface area, and low density like silica aerogel. A review of methods for obtaining porous materials using the phenomenon of spinodal decomposition has been carried out. Materials whose structure is formed in microphase separation during polymerization or polycondensation have high permeability and a sufficiently large specific surface. A significant advantage of such materials is high porosity, which can reach 80% or more
- 27 September 2020
- Published by Technosphera JSC in Nanoindustry Russia
- Vol. 13 (6) , 372-382
Моделирование свойств индивидуальных коллоидных наночастиц оксида кремния
Настоящая статья посвящена описанию взаимодействия частиц дисперсной фазы в коллоидном растворе и, в частности, наночастиц оксида кремния, находящихся в растворе электролита. Предлагаемое теоретическое рассмотрение этого взаимодействия является развитием теории ДЛФО. При создании модели принято, что наночастицы оксида кремния, находящиеся в растворе электролита, представляют собой совокупность заряженных частиц, но при этом являются электронейтральными частицами. При описании взаимодействия этих систем принято приближение о малости размеров заряженных частиц по сравнению с расстоянием между ними. В настоящей работе была предпринята попытка описания взаимодействия коллоидных частиц в рамках модели взаимодействия точечных зарядов. Для этого предлагается простая модель, описывающая взаимодействие двух систем электрических зарядов, находящихся на произвольных расстояниях друг от друга. Проведенный анализ полученных потенциальных зависимостей от "жесткости" коллоидных частиц показал наличие трех особых точек. Эти точки связаны с качественным изменением вида взаимодействия частиц между собой, что позволяет выделить четыре типа коллоидных частиц, находящихся в растворах электролитов. Проведенные расчеты указывают на возможное существование сверхмягких коллоидных систем с дальнодействующими силами взаимодействия частиц между собой. В подобных системах возможно формирование дальнодействующих гиперструктур, то есть агрегатов без ближнего взаимодействия между частицами. На основе анализа полученных результатов предложена система классификации коллоидных частиц. Для жестких коллоидных систем получено выражение для вязкости коллоидного раствора в зависимости от объемной доли дисперсной фазы и от параметра, характеризующего закон притяжения при взаимодействии коллоидных частиц.
- 27 September 2020
- Published by Technosphera JSC in Nanoindustry Russia
- Vol. 13 (6) , 372-382
Моделирование свойств индивидуальных коллоидных наночастиц оксида кремния
Настоящая статья посвящена описанию взаимодействия частиц дисперсной фазы в коллоидном растворе и, в частности, наночастиц оксида кремния, находящихся в растворе электролита. Предлагаемое теоретическое рассмотрение этого взаимодействия является развитием теории ДЛФО. При создании модели принято, что наночастицы оксида кремния, находящиеся в растворе электролита, представляют собой совокупность заряженных частиц, но при этом являются электронейтральными частицами. При описании взаимодействия этих систем принято приближение о малости размеров заряженных частиц по сравнению с расстоянием между ними. В настоящей работе была предпринята попытка описания взаимодействия коллоидных частиц в рамках модели взаимодействия точечных зарядов. Для этого предлагается простая модель, описывающая взаимодействие двух систем электрических зарядов, находящихся на произвольных расстояниях друг от друга. Проведенный анализ полученных потенциальных зависимостей от "жесткости" коллоидных частиц показал наличие трех особых точек. Эти точки связаны с качественным изменением вида взаимодействия частиц между собой, что позволяет выделить четыре типа коллоидных частиц, находящихся в растворах электролитов. Проведенные расчеты указывают на возможное существование сверхмягких коллоидных систем с дальнодействующими силами взаимодействия частиц между собой. В подобных системах возможно формирование дальнодействующих гиперструктур, то есть агрегатов без ближнего взаимодействия между частицами. На основе анализа полученных результатов предложена система классификации коллоидных частиц. Для жестких коллоидных систем получено выражение для вязкости коллоидного раствора в зависимости от объемной доли дисперсной фазы и от параметра, характеризующего закон притяжения при взаимодействии коллоидных частиц.
- Open Access
- 14 September 2020
- Published by MedCrave Group Kft. in International Journal of Petrochemical Science & Engineering
- Vol. 5 (1) , 49-54
Modelling of kinetics and structure formation at sol-gel transition
Sol-gel is a modern technological process that is widely used in production of inorganic sorbents, catalysts and catalyst carriers, synthetic zeolites, inorganic binders, ceramics with select physical, optical, magnetic, and electrical properties, glass, glass ceramics, fibers, etc. The creation of models of this process will make it possible to fine-tune the properties of the resulting materials. The sol-gel transition is a process of sol particle association accompanied by the formation of "an infinite aggregate". Two ways of constructing mathematical models are suggested. The first approach is based on the methods of statistical thermodynamics, and the second one is hydrodynamical. Both methods make it possible to obtain the inter- consistent equations describing the relationship between the gelation time and the macroscopic parameters.
- 14 September 2020
- Published by MedCrave Group Kft. in International Journal of Petrochemical Science & Engineering
- Vol. 5 (1) , 49-54
Open AccessModelling of kinetics and structure formation at sol-gel transition
Sol-gel is a modern technological process that is widely used in production of inorganic sorbents, catalysts and catalyst carriers, synthetic zeolites, inorganic binders, ceramics with select physical, optical, magnetic, and electrical properties, glass, glass ceramics, fibers, etc. The creation of models of this process will make it possible to fine-tune the properties of the resulting materials. The sol-gel transition is a process of sol particle association accompanied by the formation of "an infinite aggregate". Two ways of constructing mathematical models are suggested. The first approach is based on the methods of statistical thermodynamics, and the second one is hydrodynamical. Both methods make it possible to obtain the inter- consistent equations describing the relationship between the gelation time and the macroscopic parameters.
- Open Access
- 28 February 2020
- Published by CNT Nanostroitelstvo in Nanotechnologies in Construction: A Scientific Internet-Journal
- Vol. 12 (1) , 15-20
Properties of porous heat-resistant composition materials. Part II
- 28 February 2020
- Published by CNT Nanostroitelstvo in Nanotechnologies in Construction: A Scientific Internet-Journal
- Vol. 12 (1) , 15-20
Open AccessProperties of porous heat-resistant composition materials. Part II
- Open Access
- 24 October 2019
- Published by CNT Nanostroitelstvo in Nanotechnologies in Construction: A Scientific Internet-Journal
- Vol. 10 (5) , 80-103
Structure of pores in solid porous bodies. Part I
- 24 October 2019
- Published by CNT Nanostroitelstvo in Nanotechnologies in Construction: A Scientific Internet-Journal
- Vol. 10 (5) , 80-103
Open AccessStructure of pores in solid porous bodies. Part I
- 1 January 2019
- Published by CNT Nanostroitelstvo in Nanotechnologies in Construction: A Scientific Internet-Journal
- Vol. 11 (6) , 623-639
Properties of porous heat-resistant composition materials. Part I
- 1 January 2019
- Published by CNT Nanostroitelstvo in Nanotechnologies in Construction: A Scientific Internet-Journal
- Vol. 11 (6) , 623-639
Properties of porous heat-resistant composition materials. Part I
- 30 August 2018
- Published by CNT Nanostroitelstvo in Nanotechnologies in Construction: A Scientific Internet-Journal
- Vol. 10 (4) , 75-100
Composition and structure of porous heat-resistant inorganic composite materials
- 30 August 2018
- Published by CNT Nanostroitelstvo in Nanotechnologies in Construction: A Scientific Internet-Journal
- Vol. 10 (4) , 75-100
Composition and structure of porous heat-resistant inorganic composite materials
- 30 June 2018
- Published by CNT Nanostroitelstvo in Nanotechnologies in Construction: A Scientific Internet-Journal
- Vol. 10 (3) , 55-92
The soluble aluminum compounds and nanocomposite materials based on them. Part III.
- 30 June 2018
- Published by CNT Nanostroitelstvo in Nanotechnologies in Construction: A Scientific Internet-Journal
- Vol. 10 (3) , 55-92
The soluble aluminum compounds and nanocomposite materials based on them. Part III.
- 30 April 2018
- Published by CNT Nanostroitelstvo in Nanotechnologies in Construction: A Scientific Internet-Journal
- Vol. 10 (2) , 63-85
The soluble aluminum compounds and nanocomposite materials based on them. Part II.
- 30 April 2018
- Published by CNT Nanostroitelstvo in Nanotechnologies in Construction: A Scientific Internet-Journal
- Vol. 10 (2) , 63-85
The soluble aluminum compounds and nanocomposite materials based on them. Part II.